Document Center List of Standards on Special Wastes Including Radioactive Wastes, Hospital Wastes, Carcasses, And Other Hazardous Wastes
ICS Code 13.030.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1109 - Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
- ASTM-C1111 - Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
- ASTM-C1133 - Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
- ASTM-C1144 - Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms (Withdrawn 2018)
- ASTM-C1174 - Standard Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
- ASTM-C1207 - Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
- ASTM-C1234 - Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
- ASTM-C1285 - Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
- ASTM-C1310 - Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration (Withdrawn 2011)
- ASTM-C1316 - Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler
- ASTM-C1412 - Standard Practice for Microwave Oven Dissolution of Glass Containing Radioactive and Mixed Wastes (Withdrawn 2001)
- ASTM-C1463 - Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
- ASTM-C1500 - Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
- ASTM-C1571 - Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment (Withdrawn 2018)
- ASTM-C1682 - Standard Guide for Characterization of Spent Nuclear Fuel in Support of Interim Storage, Transportation and Geologic Repository Disposal
- ASTM-C1718 - Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
- ASTM-C1750 - Standard Guide for Development, Verification, Validation, and Documentation of Simulants for Hazardous Materials and Process Streams
- ASTM-C1751 - Standard Guide for Sampling Radioactive Tank Waste
- ASTM-C1752 - Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
- ASTM-D4447 - Standard Guide for Disposal of Laboratory Chemicals and Samples
- ASTM-D5049 - Standard Test Method for the Screening of Cyanides in Waste (Withdrawn 1999)
- ASTM-D5177 - Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005)
- ASTM-D5530 - Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
- ASTM-D5608 - Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
- ASTM-D5659 - Standard Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC (Withdrawn 2019)
- ASTM-D5830 - Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
- ASTM-D5839 - Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
- ASTM-D5928 - Standard Practice for Screening of Waste for Radioactivity
- ASTM-D6050 - Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
- ASTM-D6052 - Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
- ASTM-D6160 - Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
- ASTM-D6232 - Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
- ASTM-D6498 - Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations (Withdrawn 2016)
- ASTM-E1368 - Standard Practice for Visual Inspection of Asbestos Abatement Projects
- ASTM-E1451 - Standard Guide for Disposal of Wastes Containing Silicon Carbide Whiskers and Fibers (Withdrawn 2007)
- ASTM-E1689 - Standard Guide for Developing Conceptual Site Models for Contaminated Sites
- ASTM-E2421 - Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
- ASTM-E978 - Practice for Evaluating Mathematical Models for the Environmental Fate of Chemicals (Withdrawn 2001)
- ASTM-F1737 - Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
- ASTM-PS85 - Standard Provisional Guide for Expedited Site Characterization of Hazardous Waste Contaminated Sites
BSI:
- BIP-2117 - The Waste Electrical and Electronic Equipment Directive. Requirements and implementation
- BS-EN-12258-4 - Aluminium and aluminium alloys. Terms and definitions
- BS-EN-50574 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- BS-EN-50574-1 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- BS-EN-ISO-16640 - Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals.
- BS-EN-ISO-19017 - Guidance for gamma spectrometry measurement of radioactive waste
- BS-EN-ISO/ASTM-52931 - Additive manufacturing of metals. Environment, health and safety. General principles for use of metallic materials
- BS-ISO-14850-1 - Nuclear energy. Waste-packages activity measurement
- BS-ISO-16640 - Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals
- BS-ISO-19017 - Guidance for gamma spectrometry measurement of radioactive waste
- BS-ISO-22444-1 - Rare earth. Vocabulary
- BS-ISO-22444-2 - Rare earth. Vocabulary
- BS-ISO-22450 - Recycling of rare earth elements. Requirements for providing information on industrial waste and end-of-life products
- BS-ISO-22453 - Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products
- BS-ISO-22927 - Rare earth. Packaging and labelling
- BS-ISO-22928-1 - Rare earth. Analysis by wavelength dispersive x-ray fluorescence spectrometry (WD-XRFS)
- BS-ISO-24181-1 - Rare earth. Determination of non-rare earth impurities in individual rare earth metals and their oxides. ICP-AES
- BS-ISO-24389-1 - Management of radioactive waste from nuclear facilities
- BS-ISO-24390 - Nuclear energy. Nuclear fuel technology. Methodologies for radioactivity characterization of very low-level waste (VLLW) generated by nuclear facilities
- BS-ISO-24544 - Rare earth. Recyclable Neodymium iron boron (NdFeB) resources. Classification, general requirements and acceptance conditions
- BS-ISO-7760 - Photography. Processing waste. Determination of hydroquinone
- PD-CLC-50574-2 - Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
ISO:
- ISO-10348 - Photography - Processing wastes - Determination of silver content
- ISO-14850-1 - Nuclear energy - Waste-packages activity measurement - Part 1: High-resolution gamma spectrometry in integral mode with open geometry
- ISO-16640 - Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals
- ISO-16797 - Nuclear energy - Soxhlet-mode chemical durability test - Application to vitrified matrixes for high-level radioactive waste
- ISO-22444-1 - Rare earth - Vocabulary - Part 1: Minerals, oxides and other compounds
- ISO-22444-2 - Rare earth - Vocabulary - Part 2: Metals and their alloys
- ISO-22450 - Recycling of rare earth elements - Requirements for providing information on industrial waste and end-of-life products
- ISO-22451 - Recycling of rare earth elements - Methods for the measurement of rare earth elements in industrial waste and end-of-life products
- ISO-22453 - Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products
- ISO-22927 - Rare earth - Packaging and labelling
- ISO-22928-1 - Rare earth - Analysis by wavelength dispersive x-ray fluorescence spectrometry (WD-XRFS) - Part 1: Determination of composition of rare earth magnet scrap using standardless XRF commercial packages
- ISO-24181-1 - Rare earth - Determination of non-rare earth impurities in individual rare earth metals and their oxides - ICP-AES - Part 1: Analysis of Al, Ca, Mg, Fe and Si
- ISO-24389-1 - Management of radioactive waste from nuclear facilities - Part 1: General principles, objectives and practical approaches
- ISO-24390 - Nuclear energy - Nuclear fuel technology - Methodologies for radioactivity characterization of very low-level waste (VLLW) generated by nuclear facilities
- ISO-24544 - Rare earth - Recyclable Neodymium iron boron (NdFeB) resources - Classification, general requirements and acceptance conditions
- ISO-6849 - Photography - Processing wastes - Determination of boron
- ISO-6851 - Photography - Processing waste - Determination of total amino nitrogen (microdiffusion Kjeldahl method)
- ISO-6853 - Photography - Processing waste - Determination of ammoniacal nitrogen (microdiffusion method)
- ISO-6962 - Nuclear energy - Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste
- ISO-7760 - Photography - Processing waste - Determination of hydroquinone
- ISO-7766 - Processing photographic wastes - Analysis of cyanides - Determination of hexacyanoferrate (II) and hexacyanoferrate (III) by spectrometry
- ISO/ASTM-52931 - Additive manufacturing of metals - Environment, health and safety - General principles for use of metallic materials
Other SDOs:
- DIN-EN-12940 - Footwear Manufacturing Wastes, Waste Classification & Management
- EN-12258-4 - Aluminium & Aluminium Alloys, Terms & Definitions, Residues of the Aluminium Industry
- EN-50574 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- EN-50574-1 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- SIS-ISO/TS-22451 - Recycling of rare earth elements Methods for the measurement of rare earth elements in industrial waste and end-of-life products (ISO/TS 22451:2021, IDT)
- SS-EN-12258-4 - Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry
- SS-EN-12740 - Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste
- SS-EN-ISO-16640 - Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals (ISO 16640:2021)
- SS-ISO-14850-1 - Nuclear energy - Waste-packages activity measurement - Part 1: High-resolution gamma spectrometry in integral mode with open geometry (ISO 14850-1:2004, IDT)
- SS-ISO-15202-1 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling (ISO 15202-1:2020, IDT)
- SS-ISO-16640 - Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals (ISO 16640:2021, IDT)
- SS-ISO-16797 - Nuclear energy - Soxhlet-mode chemical durability test - Application to vitrified matrixes for high-level radioactive waste (ISO 16797:2004, IDT)
- SS-ISO-24390 - Nuclear energy Nuclear fuel technology Methodologies for radioactivity characterization of very low-level waste (VLLW) generated by nuclear facilities (ISO 24390:2023, IDT)
- SS-ISO-6962 - Nuclear energy - Standard method for testing the long-term alpha irradiation stability of matrices for solification of high-level radioactive waste (ISO 6962:2004, IDT)