Document Center is acquired by Nimonik

06.01: Paint -- Tests for Chemical, Physical, and Optical Properties; Appearance

ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.

Return to Section Index

The following documents are a part of this series:

• ASTM-D1005 - Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
• ASTM-D1006 - Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
• ASTM-D1014 - Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
• ASTM-D1150 - Single and Multi-Panel Forms for Recording Results of Exposure Tests of Paints
• ASTM-D1186 - Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006)
• ASTM-D1200 - Standard Test Method for Viscosity by Ford Viscosity Cup
• ASTM-D1210 - Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
• ASTM-D1212 - Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
• ASTM-D1259 - Standard Test Methods for Nonvolatile Content of Resin Solutions
• ASTM-D1310 - Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
• ASTM-D1331 - Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
• ASTM-D1360 - Standard Test Method for Fire Retardancy of Paints (Cabinet Method) (Withdrawn 2016)
• ASTM-D1395 - Method of Test for Abrasion Resistance of Clear Floor Coatings (Withdrawn 1988)
• ASTM-D1400 - Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006)
• ASTM-D1474 - Standard Test Methods for Indentation Hardness of Organic Coatings
• ASTM-D1475 - Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
• ASTM-D1483 - Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
• ASTM-D1535 - Standard Practice for Specifying Color by the Munsell System
• ASTM-D1540 - Method of Test for Effect of Staining Agents on Organic Finishes Used in the Transportation Industry (Withdrawn 1992)
• ASTM-D1543 - Method of Test for Color Permanence of White Architectural Enamels (Withdrawn 1990)
• ASTM-D1544 - Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
• ASTM-D1545 - Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
• ASTM-D1597 - Method of Test for Melamine Content of Nitrogen Resins (Withdrawn 1983)
• ASTM-D16 - Standard Terminology for Paint, Related Coatings, Materials, and Applications
• ASTM-D1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings
• ASTM-D1644 - Standard Test Methods for Nonvolatile Content of Varnishes
• ASTM-D1653 - Standard Test Methods for Water Vapor Transmission of Organic Coating Films
• ASTM-D1654 - Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
• ASTM-D1729 - Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
• ASTM-D1735 - Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
• ASTM-D1737 - Method of Test for Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus (Withdrawn 1987)
• ASTM-D1978 - Standard Guide for Analysis of Electrocoat Bath Samples
• ASTM-D2134 - Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
• ASTM-D215 - Standard Practice for the Chemical Analysis of White Linseed Oil Paints (Withdrawn 2005)
• ASTM-D2196 - Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
• ASTM-D2197 - Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
• ASTM-D2201 - Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
• ASTM-D2244 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM-D2245 - Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints (Withdrawn 2016)
• ASTM-D2246 - Standard Method of Testing Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking (Withdrawn 1992)
• ASTM-D2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
• ASTM-D2248 - Standard Practice for Detergent Resistance of Organic Finishes
• ASTM-D2337 - Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers (Withdrawn 2019)
• ASTM-D2348 - Standard Test Method for Arsenic in Paint (Withdrawn 2009)
• ASTM-D2349 - Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
• ASTM-D2350 - Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints (Withdrawn 2023)
• ASTM-D2351 - Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints (Withdrawn 2023)
• ASTM-D2352 - Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints (Withdrawn 2023)
• ASTM-D2353 - Method of Test for Flow Ratings of Organic Coatings Using the Shell Flow Comparator (Withdrawn 1990)
• ASTM-D2369 - Standard Test Method for Volatile Content of Coatings
• ASTM-D2370 - Standard Test Method for Tensile Properties of Organic Coatings
• ASTM-D2371 - Standard Test Method for Pigment Content of Solvent-Reducible Paints
• ASTM-D2372 - Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
• ASTM-D2373 - Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method (Withdrawn 2016)
• ASTM-D2374 - Standard Test Method for Lead in Paint Driers by EDTA Method (Withdrawn 2016)
• ASTM-D2375 - Standard Test Method for Manganese in Paint Driers by EDTA Method (Withdrawn 2016)
• ASTM-D2454 - Standard Practice for Determining the Effect of Overbaking on Organic Coatings
• ASTM-D2485 - Standard Test Methods for Evaluating Coatings For High Temperature Service
• ASTM-D2574 - Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
• ASTM-D2613 - Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
• ASTM-D2616 - Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
• ASTM-D2621 - Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
• ASTM-D2691 - Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products (Withdrawn 1992)
• ASTM-D2695 - Specification for Propylene Glycol (Withdrawn 1991)
• ASTM-D2697 - Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
• ASTM-D2698 - Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
• ASTM-D2745 - Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
• ASTM-D2794 - Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
• ASTM-D2803 - Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
• ASTM-D2805 - Standard Test Method for Hiding Power of Paints by Reflectometry
• ASTM-D281 - Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
• ASTM-D2832 - Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
• ASTM-D3022 - Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill (Withdrawn 2020)
• ASTM-D3134 - Standard Practice for Establishing Color and Gloss Tolerances
• ASTM-D3168 - Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
• ASTM-D3271 - Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis (Withdrawn 2019)
• ASTM-D3272 - Standard Practice for Vacuum Distillation of Solvents From Solvent-Reducible Paints For Analysis (Withdrawn 2008)
• ASTM-D3273 - Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
• ASTM-D3274 - Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
• ASTM-D3278 - Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
• ASTM-D332 - Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
• ASTM-D3335 - Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
• ASTM-D3359 - Standard Test Methods for Rating Adhesion by Tape Test
• ASTM-D3361 - Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
• ASTM-D3363 - Standard Test Method for Film Hardness by Pencil Test
• ASTM-D344 - Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts (Withdrawn 2018)
• ASTM-D3456 - Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
• ASTM-D3539 - Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer (Withdrawn 2015)
• ASTM-D3618 - Standard Test Method for Detection of Lead in Paint and Dried Paint Films
• ASTM-D3624 - Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
• ASTM-D3630 - Standard Guide for Determining Constituents Classified as Hazardous Contained in Protective Coatings (Withdrawn 2001)
• ASTM-D3717 - Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
• ASTM-D3718 - Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
• ASTM-D3723 - Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
• ASTM-D3792 - Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
• ASTM-D3804 - Standard Test Method for Iron in Paint Driers by EDTA Method
• ASTM-D3806 - Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
• ASTM-D387 - Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023)
• ASTM-D3891 - Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
• ASTM-D3924 - Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
• ASTM-D3925 - Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
• ASTM-D3934 - Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus
• ASTM-D3941 - Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
• ASTM-D3960 - Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
• ASTM-D3964 - Standard Practice for Selection of Coating Specimens for Appearance Measurements
• ASTM-D3969 - Standard Test Method for Zirconium in Paint Driers by EDTA Method
• ASTM-D3970 - Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
• ASTM-D3980 - Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998)
• ASTM-D3988 - Standard Test Method for Vanadium in Paint Driers by EDTA Method
• ASTM-D3989 - Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
• ASTM-D4017 - Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
• ASTM-D4039 - Standard Test Method for Reflection Haze of High-Gloss Surfaces
• ASTM-D4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
• ASTM-D4061 - Standard Test Method for Retroreflectance of Horizontal Coatings
• ASTM-D4086 - Standard Practice for Visual Evaluation of Metamerism
• ASTM-D4138 - Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
• ASTM-D4140 - Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents
• ASTM-D4141 - Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
• ASTM-D4144 - Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing (Withdrawn 2019)
• ASTM-D4206 - Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
• ASTM-D4207 - Test Method for Sustained Burning of Low-Viscosity Mixtures by the Wick Test (Withdrawn 1998)
• ASTM-D4209 - Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes
• ASTM-D4212 - Standard Test Method for Viscosity by Dip-Type Viscosity Cups
• ASTM-D4214 - Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
• ASTM-D4257 - Practice for Design and Use of Safety Alert System for Hazardous Work in the Coatings and Lining Industry (Withdrawn 1988)
• ASTM-D4287 - Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
• ASTM-D4358 - Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy (Withdrawn 2006)
• ASTM-D4359 - Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
• ASTM-D4366 - Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
• ASTM-D4370 - Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
• ASTM-D4399 - Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
• ASTM-D4414 - Standard Practice for Measurement of Wet Film Thickness by Notch Gages
• ASTM-D4449 - Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
• ASTM-D4451 - Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
• ASTM-D4457 - Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph (Withdrawn 2019)
• ASTM-D4518 - Standard Test Methods for Measuring Static Friction of Coating Surfaces (Withdrawn 2000)
• ASTM-D4563 - Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
• ASTM-D4584 - Standard Test Method for Measuring Apparent pH of Electrocoat Baths
• ASTM-D4585 - Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
• ASTM-D4587 - Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
• ASTM-D4610 - Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
• ASTM-D4708 - Standard Practice for Preparation of Uniform Free Films of Organic Coatings
• ASTM-D4747 - Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography (Withdrawn 2019)
• ASTM-D4764 - Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
• ASTM-D4827 - Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
• ASTM-D4834 - Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
• ASTM-D4948 - Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
• ASTM-D5031 - Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
• ASTM-D5087 - Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
• ASTM-D5125 - Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
• ASTM-D5145 - Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
• ASTM-D5178 - Standard Test Method for Mar Resistance of Organic Coatings
• ASTM-D5179 - Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
• ASTM-D5200 - Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
• ASTM-D5201 - Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
• ASTM-D522 - Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
• ASTM-D523 - Standard Test Method for Specular Gloss
• ASTM-D5325 - Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
• ASTM-D5380 - Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
• ASTM-D5381 - Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
• ASTM-D5478 - Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
• ASTM-D5531 - Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
• ASTM-D5588 - Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
• ASTM-D5589 - Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
• ASTM-D5590 - Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
• ASTM-D562 - Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
• ASTM-D564 - Standard Test Methods for Liquid Paint Driers
• ASTM-D5682 - Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
• ASTM-D5722 - Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
• ASTM-D5767 - Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
• ASTM-D5794 - Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
• ASTM-D5894 - Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
• ASTM-D5895 - Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
• ASTM-D6037 - Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
• ASTM-D609 - Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
• ASTM-D6093 - Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
• ASTM-D610 - Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
• ASTM-D6131 - Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
• ASTM-D6132 - Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
• ASTM-D6133 - Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
• ASTM-D6165 - Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials (Withdrawn 2016)
• ASTM-D6191 - Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
• ASTM-D6266 - Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
• ASTM-D6438 - Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
• ASTM-D6440 - Standard Terminology Relating to Hydrocarbon Resins
• ASTM-D658 - Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)
• ASTM-D6580 - Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
• ASTM-D659 - Method of Evaluating Degree of Chalking of Exterior Paints (Withdrawn 1989)
• ASTM-D660 - Standard Test Method for Evaluating Degree of Checking of Exterior Paints
• ASTM-D661 - Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
• ASTM-D6619 - Standard Practice for Incorporating Pigments by High Speed Dispersion
• ASTM-D662 - Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
• ASTM-D6631 - Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
• ASTM-D6675 - Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
• ASTM-D6695 - Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
• ASTM-D6762 - Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
• ASTM-D6886 - Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
• ASTM-D6899 - Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel (Withdrawn 2010)
• ASTM-D6902 - Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
• ASTM-D6905 - Standard Practice for Impact Flexibility of Organic Coatings
• ASTM-D6991 - Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
• ASTM-D7087 - Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments (Withdrawn 2019)
• ASTM-D7091 - Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
• ASTM-D714 - Standard Test Method for Evaluating Degree of Blistering of Paints
• ASTM-D7187 - Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
• ASTM-D7195 - Standard Guide for Setting Object Color Specifications
• ASTM-D7232 - Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
• ASTM-D7245 - Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
• ASTM-D7334 - Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
• ASTM-D7356 - Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
• ASTM-D7358 - Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
• ASTM-D7394 - Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
• ASTM-D7395 - Standard Test Method for Cone/Plate Viscosity at a 500 s^-1 Shear Rate
• ASTM-D7490 - Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
• ASTM-D7540 - Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
• ASTM-D7541 - Standard Practice for Estimating Critical Surface Tensions
• ASTM-D7588 - Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
• ASTM-D772 - Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
• ASTM-D7767 - Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
• ASTM-D7768 - Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
• ASTM-D7836 - Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
• ASTM-D7855 - Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
• ASTM-D7867 - Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
• ASTM-D7869 - Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
• ASTM-D8090 - Standard Test Method for Particle Size Distribution of Paints and Pigments Using Dynamic Imaging Methods
• ASTM-D822 - Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
• ASTM-D823 - Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
• ASTM-D8380 - Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings
• ASTM-D869 - Standard Test Method for Evaluating Degree of Settling of Paint
• ASTM-D870 - Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
• ASTM-D968 - Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
• ASTM-E1164 - Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
• ASTM-E1247 - Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
• ASTM-E1331 - Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
• ASTM-E1336 - Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry
• ASTM-E1341 - Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
• ASTM-E1345 - Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
• ASTM-E1347 - Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
• ASTM-E1348 - Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
• ASTM-E1349 - Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
• ASTM-E1360 - Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
• ASTM-E1455 - Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
• ASTM-E1477 - Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
• ASTM-E1478 - Standard Practice for Visual Color Evaluation of Transparent Sheet Materials (Withdrawn 2022)
• ASTM-E1499 - Standard Guide for Selection, Evaluation, and Training of Observers
• ASTM-E1501 - Standard Specification for Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement (Withdrawn 2013)
• ASTM-E1541 - Standard Practice for Specifying and Matching Color Using the Colorcurve System (Withdrawn 2007)
• ASTM-E1651 - Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004)
• ASTM-E167 - Standard Practice for Goniophotometry of Objects and Materials (Withdrawn 2005)
• ASTM-E1682 - Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit
• ASTM-E1696 - Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
• ASTM-E1708 - Standard Practice for Electronic Interchange of Color and Appearance Data
• ASTM-E1709 - Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
• ASTM-E1710 - Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
• ASTM-E1743 - Standard Practice for Selection and Use of Portable Retroreflectomers for the Measurement of Pavement Marking Materials (Withdrawn 2003)
• ASTM-E1767 - Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
• ASTM-E179 - Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
• ASTM-E1808 - Standard Guide for Designing and Conducting Visual Experiments
• ASTM-E1809 - Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer (Withdrawn 2010)
• ASTM-E1896 - Specification for Daytime Pedestrian Visibility Enhancement (Withdrawn 2002)
• ASTM-E2022 - Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM-E2030 - Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
• ASTM-E2072 - Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
• ASTM-E2073 - Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
• ASTM-E2152 - Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
• ASTM-E2153 - Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
• ASTM-E2175 - Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
• ASTM-E2176 - Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R_L-Rain) (Withdrawn 2013)
• ASTM-E2177 - Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery
• ASTM-E2194 - Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials
• ASTM-E2214 - Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM-E2222 - Standard Practice for Host Computer Communication with Spectrometers for Color Measurements (Withdrawn 2012)
• ASTM-E2301 - Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
• ASTM-E2302 - Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
• ASTM-E2366 - Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter (Withdrawn 2014)
• ASTM-E2367 - Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
• ASTM-E2387 - Standard Practice for Goniometric Optical Scatter Measurements
• ASTM-E2466 - Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology (Withdrawn 2018)
• ASTM-E2480 - Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
• ASTM-E2501 - Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
• ASTM-E2539 - Standard Test Method for Multiangle Color Measurement of Interference Pigments
• ASTM-E2540 - Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
• ASTM-E2545 - Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras (Withdrawn 2018)
• ASTM-E259 - Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries (Withdrawn 2024)
• ASTM-E2630 - Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source (Withdrawn 2022)
• ASTM-E2670 - Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras (Withdrawn 2018)
• ASTM-E2729 - Standard Practice for Rectification of Spectrophotometric Bandpass Differences
• ASTM-E2832 - Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
• ASTM-E284 - Standard Terminology of Appearance
• ASTM-E2867 - Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
• ASTM-E2970 - Standard Practice for Specifying Color by the Natural Colour System (NCS)
• ASTM-E3040 - Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
• ASTM-E308 - Standard Practice for Computing the Colors of Objects by Using the CIE System
• ASTM-E312 - Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC) (Withdrawn 2017)
• ASTM-E313 - Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
• ASTM-E3320 - Standard Test Method for Measurement of Retroreflective Pavement Marking Materials Using a Mobile Retroreflectometer Unit (MRU)
• ASTM-E3415 - Standard Practice for Calculating the Colors of Objects by Using the ASTM Method
• ASTM-E430 - Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
• ASTM-E805 - Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
• ASTM-E808 - Standard Practice for Describing Retroreflection
• ASTM-E809 - Standard Practice for Measuring Photometric Characteristics of Retroreflectors
• ASTM-E810 - Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
• ASTM-E811 - Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
• ASTM-E848 - Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
• ASTM-E97 - Method of Test for Directional Reflectance Factor, 45-Deg 0-Deg, of Opaque Specimens by Broad-Band Filter Reflectometry (Withdrawn 1991)
• ASTM-E991 - Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
• ASTM-F529 - Method for Interpretation of Interferograms of Nominally Plane Wavefronts
• ASTM-F530 - Test Method for Wavefront Distortion of Laser Rods (Withdrawn 1994)
• ASTM-F531 - Test Method for Wavefront Distortion and Face Parallelism of Laser Disks (Withdrawn 1994)
• ASTM-F532 - Test Methods for Measuring Width of Defects in Optical Surfaces, Using Nomarski Differential Microscopy
• ASTM-F578 - Test Method for Lasting Threshold and Slope Efficiency of Neodymium-Doped Laser Rods
• ASTM-F579 - Test Method for Face Flatness by Optical Non-Contact Technique
• ASTM-F611 - Test Method for Wavefront Distortion of Nominally Plane Optical Elements Due to Refractive Index Inhomogeneity (Withdrawn 1994)
• ASTM-F663 - Practice for Manual Analysis of Interferometric Data by Least-Squares Fitting to a Plane Reference Surface
• ASTM-F664 - Practice for Manual Analysis of Interferometric Data by Least-Squares Fitting to a Spherical Reference Surface and for Computer-Aided Analysis of Interferometric Data by Least-Squares Fitting to Both Plane and Spherical Reference Surfa (Withdrawn 1994)
• ASTM-F923 - Standard Guide to Properties of High Visibility Materials Used to Improve Individual Safety (Withdrawn 2006)