05.06: Gaseous Fuels; Coal and Coke
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C515 - Standard Specification for Chemical-Resistant Ceramic Tower Packings
- ASTM-D1070 - Standard Test Methods for Relative Density of Gaseous Fuels
- ASTM-D1071 - Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM-D1072 - Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
- ASTM-D1142 - Standard Test Method for Water Vapor Content of Gaseous Fuels by
Measurement of Dew-Point Temperature - ASTM-D121 - Standard Terminology of Coal and Coke
- ASTM-D1412 - Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C
- ASTM-D167 - Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
- ASTM-D1756 - Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal (Withdrawn 2013)
- ASTM-D1757 - Standard Test Method for Sulfate Sulfur in Ash from Coal and Coke (Withdrawn 2009)
- ASTM-D1826 - Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
- ASTM-D1857 - Standard Test Method for Fusibility of Coal and Coke Ash
- ASTM-D1945 - Standard Test Method for Analysis of Natural Gas by Gas Chromatography
- ASTM-D1946 - Standard Practice for Analysis of Reformed Gas by Gas Chromatography
- ASTM-D197 - Standard Test Method for Sampling and Fineness Test of Pulverized Coal
- ASTM-D1977 - Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
- ASTM-D1988 - Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D1989 - Standard Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters (Withdrawn 2000)
- ASTM-D2013 - Standard Practice for Preparing Coal Samples for Analysis
- ASTM-D2014 - Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
- ASTM-D2015 - Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter (Withdrawn 2000)
- ASTM-D2234 - Standard Practice for Collection of a Gross Sample of Coal
- ASTM-D2361 - Standard Test Method for Chlorine in Coal (Withdrawn 2008)
- ASTM-D2492 - Standard Test Method for Forms of Sulfur in Coal (Withdrawn 2021)
- ASTM-D2639 - Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
- ASTM-D2795 - Standard Test Methods for Analysis of Coal and Coke Ash (Withdrawn 2001)
- ASTM-D2797 - Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
- ASTM-D2798 - Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
- ASTM-D2799 - Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
- ASTM-D291 - Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
- ASTM-D293 - Standard Test Method for the Sieve Analysis of Coke
- ASTM-D2961 - Standard Practice for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36 mm [No. 8 Sieve] Topsize
- ASTM-D3038 - Standard Test Method for Drop Shatter Test for Coke
- ASTM-D3172 - Standard Practice for Proximate Analysis of Coal and Coke
- ASTM-D3173 - Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
- ASTM-D3174 - Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
- ASTM-D3175 - Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
- ASTM-D3176 - Standard Practice for Ultimate Analysis of Coal and Coke
- ASTM-D3177 - Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke (Withdrawn 2012)
- ASTM-D3178 - Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
- ASTM-D3179 - Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke (Withdrawn 2008)
- ASTM-D3180 - Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
- ASTM-D3286 - Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter (Withdrawn 2000)
- ASTM-D3302 - Standard Test Method for Total Moisture in Coal
- ASTM-D3402 - Standard Test Method for Tumbler Test for Coke
- ASTM-D346 - Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
- ASTM-D3588 - Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM-D3610 - Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
- ASTM-D3663 - Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM-D3682 - Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes by Atomic Spectrometry
- ASTM-D3683 - Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption (Withdrawn 2018)
- ASTM-D3684 - Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method (Withdrawn 2014)
- ASTM-D3761 - Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method (Withdrawn 2019)
- ASTM-D3766 - Standard Terminology Relating to Catalysts and Catalysis
- ASTM-D388 - Standard Classification of Coals by Rank
- ASTM-D3906 - Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
- ASTM-D3907 - Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM-D3908 - Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
- ASTM-D3942 - Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
- ASTM-D3943 - Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
- ASTM-D3956 - Standard Specification for Methane Thermophysical Property Tables
- ASTM-D3984 - Standard Specification for Ethane Thermophysical Property Tables
- ASTM-D3997 - Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
- ASTM-D4058 - Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM-D4084 - Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
- ASTM-D409 - Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
- ASTM-D4150 - Standard Terminology Relating to Gaseous Fuels
- ASTM-D4164 - Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM-D4179 - Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM-D4180 - Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM-D4182 - Standard Practice for Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke (Withdrawn 2010)
- ASTM-D4208 - Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
- ASTM-D4222 - Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
- ASTM-D4239 - Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM-D4284 - Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
- ASTM-D4326 - Standard Test Method for Major and Minor Elements in Coal Ash By X-Ray Fluorescence
- ASTM-D4362 - Standard Specification for Propane Thermophysical Property Tables
- ASTM-D4365 - Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
- ASTM-D4371 - Standard Test Method for Determining the Washability Characteristics of Coal
- ASTM-D440 - Standard Test Method of Drop Shatter Test for Coal
- ASTM-D441 - Standard Test Method of Tumbler Test for Coal
- ASTM-D4438 - Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
- ASTM-D4463 - Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
- ASTM-D4464 - Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
- ASTM-D4468 - Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and
Rateometric Colorimetry - ASTM-D4481 - Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
- ASTM-D4512 - Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM-D4513 - Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
- ASTM-D4567 - Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
- ASTM-D4596 - Standard Practice for Collection of Channel Samples of Coal in a Mine
- ASTM-D4606 - Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
- ASTM-D4621 - Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke (Withdrawn 2010)
- ASTM-D4641 - Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
- ASTM-D4642 - Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
- ASTM-D4650 - Standard Specification for Normal Butane Thermophysical Property Tables
- ASTM-D4651 - Standard Specification for Isobutane Thermophysical Property Tables
- ASTM-D4699 - Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM-D4702 - Standard Practice for Quality Management of Mechanical Coal Sampling Systems (Withdrawn 2008)
- ASTM-D4749 - Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM-D4780 - Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
- ASTM-D4781 - Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM-D4782 - Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
- ASTM-D4784 - Standard Specification for Liquefied Natural Gas Density Calculation Models
- ASTM-D4810 - Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D4824 - Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
- ASTM-D4888 - Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D4891 - Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM-D4915 - Standard Guide for Manual Sampling of Coal from Tops of Railroad Cars (Withdrawn 2003)
- ASTM-D4916 - Standard Practice for Mechanical Auger Sampling (Withdrawn 2008)
- ASTM-D4926 - Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
- ASTM-D4984 - Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D5016 - Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
- ASTM-D5061 - Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
- ASTM-D5114 - Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
- ASTM-D5142 - Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures (Withdrawn 2010)
- ASTM-D5153 - Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
- ASTM-D5154 - Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM-D5192 - Standard Practice for Collection of Coal Samples from Core
- ASTM-D5263 - Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
- ASTM-D5287 - Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
- ASTM-D5341 - Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
- ASTM-D5357 - Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
- ASTM-D5373 - Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
- ASTM-D5454 - Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
- ASTM-D5503 - Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation (Withdrawn 2017)
- ASTM-D5504 - Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
- ASTM-D5515 - Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer
- ASTM-D5671 - Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
- ASTM-D5757 - Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
- ASTM-D5758 - Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
- ASTM-D5865 - Standard Test Method for Gross Calorific Value of Coal and Coke
- ASTM-D5954 - Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
- ASTM-D5987 - Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods (Withdrawn 2020)
- ASTM-D6172 - Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
- ASTM-D6175 - Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM-D6228 - Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
- ASTM-D6273 - Standard Test Method for Natural Gas Odor Intensity
- ASTM-D6315 - Standard Practice for Manual Sampling of Coal from Tops of Barges (Withdrawn 2003)
- ASTM-D6316 - Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM-D6347 - Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
- ASTM-D6349 - Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
- ASTM-D6350 - Standard Test Method for Mercury Sampling and Analysis in Natural Gas and Other Gaseous Fuels by Amalgamation Atomic Fluorescence Spectroscopy
- ASTM-D6357 - Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry
- ASTM-D6414 - Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
- ASTM-D6518 - Standard Practice for Bias Testing a Mechanical Coal Sampling System (Withdrawn 2008)
- ASTM-D6542 - Standard Practice for Tonnage Calculation of Coal in a Stockpile
- ASTM-D6543 - Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
- ASTM-D6609 - Standard Guide for Part-Stream Sampling of Coal
- ASTM-D6610 - Standard Practice for Manual Sampling Coal from Surfaces of a Stockpile (Withdrawn 2003)
- ASTM-D6721 - Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
- ASTM-D6722 - Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
- ASTM-D6761 - Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM-D6796 - Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
- ASTM-D6883 - Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
- ASTM-D6968 - Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection (Withdrawn 2024)
- ASTM-D7084 - Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM-D7085 - Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
- ASTM-D7164 - Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
- ASTM-D7165 - Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
- ASTM-D7166 - Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
- ASTM-D720 - Standard Test Method for Free-Swelling Index of Coal
- ASTM-D7206 - Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM-D7256 - Standard Practice for Mechanical Collection and Within-System Preparation of a Gross Sample of Coal from Moving Streams (Withdrawn 2008)
- ASTM-D7265 - Standard Specification for Hydrogen Thermophysical Property Tables
- ASTM-D7314 - Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
- ASTM-D7348 - Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
- ASTM-D7430 - Standard Practice for Mechanical Sampling of Coal
- ASTM-D7442 - Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts, Catalytic Materials, and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
- ASTM-D7448 - Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke (Withdrawn 2024)
- ASTM-D7493 - Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
- ASTM-D7550 - Standard Test Method for Determination of Ammonium, Alkali and Alkaline Earth Metals in Hydrogen and Other Cell Feed Gases by Ion Chromatography (Withdrawn 2017)
- ASTM-D7551 - Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence (Withdrawn 2024)
- ASTM-D7569 - Standard Practice for Determination of Gas Content of Coal-Direct Desorption Method
- ASTM-D7582 - Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
- ASTM-D7606 - Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
- ASTM-D7607 - Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
- ASTM-D7634 - Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
- ASTM-D7649 - Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis (Withdrawn 2023)
- ASTM-D7650 - Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
- ASTM-D7651 - Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
- ASTM-D7652 - Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection (Withdrawn 2020)
- ASTM-D7653 - Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
- ASTM-D7675 - Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
- ASTM-D7676 - Standard Practice for Screening Organic Halides Contained in Hydrogen or Other Gaseous Fuels
- ASTM-D7708 - Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
- ASTM-D7800 - Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023)
- ASTM-D7833 - Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
- ASTM-D7892 - Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
- ASTM-D7904 - Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
- ASTM-D7940 - Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
- ASTM-D7941 - Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
- ASTM-D7964 - Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
- ASTM-D8000 - Standard Practice for Flow Conditioning of Natural Gas and Liquids
- ASTM-D8010 - Standard Test Method for Determination of Water Soluble Alkali Content in Coal
- ASTM-D8080 - Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel
- ASTM-D8088 - Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy
- ASTM-D8213 - Standard Test Method for Determination of Boron in Coal
- ASTM-D8214 - Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM-D8215 - Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
- ASTM-D8221 - Standard Practice for Determining the Calculated Methane Number (MN
C ) of Gaseous Fuels Used in Internal Combustion Engines - ASTM-D8230 - Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection
- ASTM-D8247 - Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection
- ASTM-D8251 - Standard Practice for Determining Compressor Oil Carryover in Compressed Natural Gas Used as a Natural Gas Motor Vehicle Fuel
- ASTM-D8339 - Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
- ASTM-D8352 - Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
- ASTM-D8353 - Standard Guide for Determination of Individual Particle Strength of Low Surface Area Catalysts and Catalyst Carriers by Drop Test onto a Steel Plate
- ASTM-D8392 - Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
- ASTM-D8393 - Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption
- ASTM-D8413 - Standard Guide for Measuring the Water Pore Volume of Catalytic Materials by Centrifuge
- ASTM-D8455 - Standard Test Method for Speciated Siloxane GC-IMS Analyzer Based On-line for Siloxane and Trimethylsilanol Content of Gaseous Fuels
- ASTM-D8487 - Standard Specification for Natural Gas, Hydrogen Blends for Use as a Motor Vehicle Fuel
- ASTM-D8488 - Standard Test Method for Determination of Hydrogen Sulfide (H
2 S) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS) - ASTM-E1358 - Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
- ASTM-E1534 - Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
- ASTM-E1535 - Standard Test Method for Performance Evaluation of Anaerobic Digestion Systems (Withdrawn 2011)
- ASTM-E1690 - Standard Test Method for Determination of Ethanol Extractives in Biomass
- ASTM-E1705 - Standard Terminology Relating to Bioenergy and Industrial Chemicals from Biomass
- ASTM-E1721 - Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
- ASTM-E1755 - Standard Test Method for Ash in Biomass
- ASTM-E1756 - Standard Test Method for Determination of Total Solids in Biomass
- ASTM-E1757 - Standard Practice for Preparation of Biomass for Compositional Analysis
- ASTM-E1758 - Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
- ASTM-E1821 - Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
- ASTM-E3050 - Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel
- ASTM-E3066 - Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass
- ASTM-E3146 - Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration
- ASTM-E3181 - Standard Practice for Determination of the Converted Fraction of Starch and Cellulosic Content From a Fuel Ethanol Production Facility
- ASTM-E3237 - Standard Specification for Undenatured Ethanol from Biomass for Use in Industrial Applications
- ASTM-E3256 - Standard Practice for Reference Scenarios When Evaluating the Relative Sustainability of Bioproducts
- ASTM-E3334 - Standard Test Method for Acidity in Ethanol and Ethanol Solutions
- ASTM-E3399 - Standard Test Method for Non-volatile Residue in Ethanol and Ethanol Solutions
- ASTM-E3417 - Standard Test Method for Determination of Cellulose/Hemicellulose-Derived Glucan and Galactan Content in Solid Corn Biomass Samples
- ASTM-E870 - Standard Test Methods for Analysis of Wood Fuels
- ASTM-E871 - Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM-E872 - Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM-E873 - Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels