FSC Standardization Area MFFP: Metal Finishes and Finishing Processes and Procedures
The following documents are a part of this series:
ASTM:
US GOVERNMENT DOCUMENTS:
- AAMA-605.2 - Aluminum Extrusions and Panels, Architectural, High Performance Organic Coatings on
- AMS-2405 - Electroless Nickel Plating, Low Phosphorus
- AMS-2406 - Plating, Chromium, Hard Deposit
- AMS-2409 - Plating, Immersion Tin for Aluminum Alloys
- AMS-2410 - Plating, Silver, Nickel Strike, High Bake
- AMS-2413 - Plating, Silver-Rhodium
- AMS-2415 - Plating, Lead and Indium
- AMS-2416 - Plating, Nickel-Cadmium Diffused
- AMS-2417 - Plating, Zinc-Nickel Alloy
- AMS-2419 - Plating, Cadmium-Titanium
- AMS-2420 - Plating of Aluminum for Solderability, Zinc Immersion Pre-Treatment Process
- AMS-2424 - Plating, Nickel Low-Stressed Deposit
- AMS-2430 - Shot Peening, Automatic
- AMS-2433 - Plating, Nickel-Thallium-Boron or Nickel-Boron, Electroless Deposition
- AMS-2435 - Coating, Tungsten Carbide-Cobalt Coating, Detonation Process (STABILIZED Sep 2017)
- AMS-2436 - Coating, Aluminum Oxide, Detonation Deposition
- AMS-2454 - Plating, Electroless Nickel, Codeposited with Polytetrafluoroethylene (PTFE)
- AMS-2473 - Chemical Film Treatment for Aluminum Alloys, General Purpose Coating
- AMS-2491 - Surface Treatment of Polytetrafluoroethylene (PTFE), Preparation for Bonding (STABILIZED Jan 2015)
- AMS-2515 - Polytetrafluoroethylene (PTFE) Resin Coating, Low Build, 370 to 400 DEG C (698 to 752 DEG F) Fusion
- AMS-2516 - Polytetrafluoroethylene (PTFE) Resin Coating, High Build, 698 to 752 Deg F (370 to 400 Deg C) Fusion
- AMS-2590 - Rotary Flap Peening of Metal Parts
- AMS-2755 - Nitriding, Molten Salt Bath (STABILIZED Aug 2015)
- AMS-5819 - Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire, 62Co - 27Cr - 2.9Ni - 5.5Mo
- AMS-C-26074 - Electroless Nickel Coatings (Stabilized OCT 2013 - Use AMS-2404 and AMS-2433 for New Design)
- AMS-C-5541 - Chemical Conversion Coatings on Aluminum & Aluminum Alloys
- AMS-C-81769 - Chemical Milling of Metals, Specification For (STABILIZED Jan 2015)
- AMS-C-8837 - Coating, Cadmium (Vacuum Deposited) (STABILIZED Oct 2015)
- AMS-S-13165 - Shot Peening of Metal Parts
- AMS-STD-753 - Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation (STABILIZED Apr 2017)
- DI-MFFP-80108 - Corrosion Testing Reports
- DI-MFFP-80737 - Corrosion Prevention and Material Deterioration Report
- DI-MFFP-81336 - Finish Specification
- DI-MFFP-81402 - Finish Specification
- DI-MFFP-81403 - Corrosion Prevention and Control Plan
- DI-MFFP-81972 - United States Air Force (USAF) Corrosion Prevention and Control Plan Documentation
- DI-MFFP-82119 - Program-Unique Material or Process Specifications
- DI-MFFP-82428 - Army Ground Systems Corrosion Prevention and Control Plan
- DOD-P-16232 - Phosphate Coatings, Heavy, Manganese or Zinc Base (for Ferrous Metals)
- DOD-STD-2138 - Metal Sprayed Coating Systems for Corrosion Protection Aboard Naval Ships
- DOD-STD-2182 - Engineering Chromium Plating (Electrodeposited) for Repair of Chromium Plating
- MIL-A-40147 - Aluminum Coating (Hot-Dip) for Ferrous Parts (No Superseding Document)
- MIL-A-63576 - Aluminum Oxide Coatings, Lubricative, for Aluminum and Aluminum Alloys (No Superseding Document)
- MIL-A-81801 - Anodic Coating for Zinc and Zinc Alloys (No Superseding Document)
- MIL-A-8625 - Anodic Coatings for Aluminum and Aluminum Alloys
- MIL-B-47142 - Bonding, Laminating and Insulating Magnetic Steel Electrical Laminations, Material and Process for (No Superseding Document)
- MIL-C-11436 - Chromium, Gray Plated (Use MIL-N-55392)
- MIL-C-13924 - Coating, Oxide, Black, for Ferrous Metals (Now MIL-DTL-13924)
- MIL-C-14538 - Chromium Plating, Black (Electrodeposited)
- MIL-C-14550 - Copper Plating (Electrodeposited) (Superseded by SAE AMS-2418)
- MIL-C-17711 - Coatings, Chromate, for Zinc Alloy Castings and Hot Dip Galvanized Surfaces
- MIL-C-20218 - Chromium Plating, Electrodeposited, Porous
- MIL-C-23217 - Coating, Aluminum, Vacuum Deposited (Asg) (No Superseding Document)
- MIL-C-23422 - Chromium Plating, Electrodeposited (Issue Controlled - See Your Contracting Officer)
- MIL-C-26074 - Coatings, Electroless Nickel, Requirements for
- MIL-C-47267 - Cleaning and Surface Preparation, Vapor Blast (No Superseding Document)
- MIL-C-5541 - Chemical Conversion Coatings on Aluminum & Aluminum Alloys
- MIL-C-60536 - Coating, Anodic, Hard, for Aluminum and Aluminum Alloys (Superseded by MIL-A-8625)
- MIL-C-60539 - Coating, Anodic, Conventional, for Aluminum & Aluminum Alloys
- MIL-C-81562 - Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) (Superseded by SAE AMS-C-81562)
- MIL-C-81706 - Chemical Conversion Materials for Coating Aluminum & Aluminum Alloys (MIL-DTL-81706)
- MIL-C-81740 - Coatings, Aluminum and Aluminum Alloys (Metallic Compound Decomposition) (No Superseding Document)
- MIL-C-81751 - Coating, Metallic-Ceramic
- MIL-C-81769 - Chemical Milling of Metals, Specification For (Replaced by AMS-C-81769)
- MIL-C-81797 - Coating, Inorganically Bonded Aluminum (Electrophoretically Deposited) (No Superseding Document)
- MIL-C-83488 - Coating, Aluminum, Ion Vapor Deposited (Now MIL-DTL-83488)
- MIL-C-85455 - Chromium-Molybdenum Plating (Electrodeposited) (No Superseding Document)
- MIL-C-85614 - Coating, Fastener (Titanium and Cres Alloys), Aluminum Pigmented, Organically Bonded (for All Threaded and Unthreaded Fasteners)
- MIL-C-87115 - Coating, Immersion Zinc Flake/Chromate Dispersion
- MIL-C-8837 - Coating, Cadmium (Vacuum Deposited) (Superseded by SAE-AMS-C-8837)
- MIL-DTL-13924 - Coating, Oxide, Black, for Ferrous Metals
- MIL-DTL-14072 - Finishes for Ground Based Electronic Equipment
- MIL-DTL-14538 - Chromium Plating, Black (Electrodeposited)
- MIL-DTL-16232 - Phosphate Coating, Heavy, Manganese or Zinc Base
- MIL-DTL-26074 - Coatings, Electroless Nickel Requirements for (See Notice 1 for Replacement Information)
- MIL-DTL-32119 - Coatings, Electroless Nickel, Special Applications (Classified, See your contracting officer)
- MIL-DTL-32459 - Coatings, Anodic for Magnesium and Magnesium Alloys
- MIL-DTL-32495 - Aluminum-Based Powders for Cold Spray Deposition
- MIL-DTL-32502 - Coating, Cobalt-Phosphorus Alloy, Nanocrystalline (Electrodeposited)
- MIL-DTL-32648 - Zinc Nickel Plating, Low Hydrogen Embrittlement Electro-Deposition
- MIL-DTL-45204 - Gold Plating, Electrodeposited
- MIL-DTL-495 - Finish, Chemical, Black, for Copper Alloys
- MIL-DTL-5002 - Surface Treatments and Inorganic Coatings For Metal Surfaces of Weapons Systems
- MIL-DTL-5541 - Chemical Conversion Coatings on Aluminum and Aluminum Alloys
- MIL-DTL-81706 - Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys
- MIL-DTL-83488 - Coating, Aluminum, High Purity
- MIL-F-14072 - Finishes for Ground Electronic Equipment
- MIL-F-495 - Finish, Chemical, Black, for Copper Alloys
- MIL-F-7179 - Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems (Superseded by MIL-STD-7179)
- MIL-G-19788 - Gold Plating (Electrodeposited) (Superseded by MIL-G-45204)
- MIL-G-45204 - Gold Plating, Electrodeposited (Renumbered MIL-DTL-45204)
- MIL-HDBK-1250 - Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies
- MIL-HDBK-132 - Protective Finishes for Metal and Wood Surfaces (No Superseding Document)
- MIL-HDBK-1516 - Unified Code for Coatings and Finishes for DoD Materiel (NO SUPERSEDING Document)
- MIL-HDBK-1568 - Material and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems (Replaced by MIL-STD-1568)
- MIL-HDBK-1587 - Materials and Process Requirements for Air Force Weapons Systems
- MIL-HDBK-1884 - Coating, Plasma Spray Deposition
- MIL-HDBK-1886 - Detonation Process for Tungsten Carbide-Cobalt Coating
- MIL-HDBK-205 - Phosphate and Black Oxide Coating of Ferrous Metals
- MIL-HDBK-46164 - Rustproofing for Military Vehicles and Trailers
- MIL-HDBK-509 - Cleaning and Treatment of Aluminum Parts Prior To Painting
- MIL-HDBK-529 - Use of Handheld Lasers to Remove Coatings and Corrosion from Aerospace Ground Equipment
- MIL-HDBK-542 - Cold Spray Nondestructive Testing Methods for Quality Assurance
- MIL-HDBK-721 - Corrosion & Corrosion Protection of Metals (Superseded by MIL HDBK 729)
- MIL-HDBK-724 - The Stress Corrosion Cracking & Hydrogen Stress Cracking of Metals (Superseded by MIL HDBK 729)
- MIL-HDBK-729 - Corrosion & Corrosion Prevention Metals
- MIL-HDBK-735 - Material Deterioration Prevention and Control Guide for Army Material, Part One, Metals
- MIL-HDBK-808 - Finish, Protective, and Codes for Finishing Schemes for Ground and Ground and Ground Support Equipment
- MIL-I-13857 - Impregnation of Metal Castings
- MIL-I-8474 - Inspection of Aluminum Alloy Parts, Anodizing Process for
- MIL-L-13762 - Lead Alloy Coating, Hot Dip (for Iron and Steel Parts) (Superseded by ASTM-a308)
- MIL-L-13808 - Lead Plating (Electrodeposited)
- MIL-L-46064 - Lead-Tin Alloy Coating (Electrodeposited) (Superseded by ASTM-B200)
- MIL-M-3171 - Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on (Superseded by SAE-AMS-M-3171)
- MIL-M-45202 - Magnesium Alloy, Anodic Treatment of (Superseded by ASTM-D1732)
- MIL-M-46080 - Magnesium Castings, Process for Anodic Cleaning and Surface Sealing of (Use MIL-M-3171)
- MIL-M-6874 - Metal Spraying, Process for (No Superseding Document)
- MIL-N-55392 - Nickel-Carbon, Porous, Electrodeposited, for Camouflage (No Superseding Document)
- MIL-P-18317 - Plating, Black Nickel (Electrodeposited) on Brass, Bronze, or Steel
- MIL-P-21415 - Protective Finish and Painting for Polaris Fleet Ballistic Missile (No Superseding Document)
- MIL-P-23408 - Plating: Tin-Cadmium (Electrodeposited)
- MIL-P-27418 - Plating, Soft Nickel (Electrodeposited, Sulfamate Bath)
- MIL-P-45209 - Palladium Plating, (Electrodeposited) (Superseded by ASTM-B679)
- MIL-P-47090 - Passivation of Corrosion and Heat Resistant Steels (No Superseding Document)
- MIL-P-47141 - Plating, Ternary Alloy (Electrodeposited) (No Superseding Document)
- MIL-P-47184 - Plating, Nickel-Tungsten, Electrodeposit on Aluminum Alloys, by Selective (Brush) Method (No Superseding Document)
- MIL-P-81728 - Plating, Tin Lead (Electrodeposited (Superseded by SAE AMS-P-81728)
- MIL-P-81985 - Peening of Metals
- MIL-P-83348 - Powder, Plasma Spray (No Superseding Document)
- MIL-P-83348/1 - Powders, Plasma Spray Nickel Aluminum Powder, Type I, Composition g, Class 2 (No Superseding Document)
- MIL-PRF-32577 - Coating System, Nonskid, Metallic Thermal Spray Application
- MIL-PRF-32647 - Zinc-Nickel Electroplating for Fasteners
- MIL-PRF-32660 - Plating, Zinc-Nickel Alloy, Low Hydrogen Embrittlement, Alkaline Electrodeposited
- MIL-PRF-32711 - Diamond-Like Carbon (DLC) Coating for Armament Weapons Systems
- MIL-R-46085 - Rhodium Plating, Electrodeposited
- MIL-R-46164 - Rustproofing for Military Vehicles and Trailers (Superseded by MIL-HDBK-46164)
- MIL-R-81841 - Rotary Flap Peening of Metal Parts
- MIL-S-12515 - Surface Hardening: Flame and Induction (For Ferrous Alloys)
- MIL-S-13165 - Shot Peening of Metal Parts (Superseded by SAE AMS-S-13165)
- MIL-S-47042 - Sealing, Surface, of Anodized Magnesium Alloys, Process Requirements for (No Superseding Document)
- MIL-S-5002 - Surface Treatments and Inorganic Coatings For Metal Surfaces of Weapons Systems
- MIL-S-6090 - Steels Used in Aircraft Carburizing and Nitriding, Process for (Superseded by SAE AMS-S-6090)
- MIL-STD-1500 - Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition
- MIL-STD-1501 - Chromium Plating, Low Embrittlement, Electrodeposition
- MIL-STD-1503 - Preparation of Aluminum Alloys For Surface Treatment and Inorganic Coating
- MIL-STD-1504 - Abrasive Blasting
- MIL-STD-1568 - Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
- MIL-STD-1587 - Material and Process Requirements for Aerospace Weapons Systems
- MIL-STD-1687 - Thermal Spray Processes for Naval Ship Machinery Applications
- MIL-STD-171 - Finishing of Metal and Wood Surfaces
- MIL-STD-1819 - Performance Evaluation for Plasma Spray Masking Tape (No Superseding Document)
- MIL-STD-186 - Protective Finishing for Army Missile Weapon Systems
- MIL-STD-1873 - Mass Finishing, Process for
- MIL-STD-1876 - Nitriding, Gaseous Atmosphere Processing for (No Superseding Document)
- MIL-STD-1878 - Carburizing, Gaseous Atmosphere, Process for (No Superseding Document)
- MIL-STD-1884 - Coating, Plasma Spray Deposition (Superseded by MIL-HDBK-1884)
- MIL-STD-1886 - Tungsten Carbide-Cobalt Coating, Detonation Process for (Superseded by MIL-HDBK-1886)
- MIL-STD-1893 - Cleaning Electrochemically Machined Nickel Base Alloy Surfaces, Process for (Metric) (No Superseding Document)
- MIL-STD-193 - Painting, Procedures and Marking for Vehicles, Construction Equipment, Material Handling Equipment, and Spare Parts
- MIL-STD-2138 - Metal Sprayed Coatings for Corrosion Protection Aboard Naval Ships (Metric)
- MIL-STD-2161 - Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft
- MIL-STD-2197 - Brush Electroplating on Marine Machinery
- MIL-STD-3021 - Materials Deposition, Cold Spray
- MIL-STD-3049 - Materials Deposition, DDM: Direct Deposition of Metal for Remanufacture, Restoration and Recoating
- MIL-STD-338 - Cleaning and Treatment of Aluminum Parts Prior To Painting (Superseded by MIL-HDBK-509)
- MIL-STD-40002 - Heat Treatment Coding System, General (No Superseding Document)
- MIL-STD-40009 - Cleaning and Passivation, Process for (Am350 and Am355 Stainless Steels) (No Superseding Document)
- MIL-STD-7179 - Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems
- MIL-STD-753 - Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation (Superseded by SAE AMS-STD-753)
- MIL-STD-808 - Finish, Materials and Processes for Corrosion Prevention and Control in Support Equipment (Superseded by MIL-HDBK-808)
- MIL-STD-865 - Selective Brush Plating, Electro-Deposition
- MIL-STD-866 - Grinding of Chrome Plated Steel and Steel Parts Heat Treated to 180,000 PSI or Over
- MIL-STD-868 - Nickel Plating, Low Embrittlement, Electro-Deposition
- MIL-STD-869 - Flame Spraying
- MIL-STD-870 - Cadmium Plating, Low Embrittlement, Electrodepositon
- MIL-STD-871 - Electro-Chemical Stripping of Inorganic Finishes
- MIL-STD-889 - Dissimilar Metals
- MIL-T-10727 - Tin Plating: Electrodeposited or Hot-Dipped, for Ferrous and Nonferrous Metals (Superseded by ASTM-B545, ASTM-B339)
- MIL-T-12879 - Treatments, Chemical, Prepaint and Corrosion Inhibitive, for Zinc Surfaces (Superseded by ASTM-D2092)
- MIL-T-81955 - Tin Plating, Immersion for Copper and Copper Alloys
- MIL-Z-17871 - Zinc-Coating (Hot-Dip Galvanizing)
- NAS-1192 - Performance Specification for Hard Anodic Coatings on Aluminum Alloys
- NAS-1614 - Coating - Protective, Temporary, Water, Reducible, Chemicalsolution Removable
- NAS-1615 - Primer Coating Water Reducible, Corrosion Inhibiting
- NAS-1616 - Topcoat, Water Reducible
- NAS-1617 - Coating: High Temperature Resistant, Water Reducible
- NAS-4006 - ALUMINUM COATING
- NAS-4160 - Plating, Cadmium, Electrodeposited, for Fasteners
- NAS-672 - Plating, High Strength Steels, Cadmium
- QPL-32495 - Powders for Cold Spray Deposition
- QPL-32577 - Coating System, Nonskid, Metallic Thermal Spray Application
- QPL-81706 - Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys
- QPL-TT-C-490 - Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings)
- QQ-C-320 - Chromium Plating (Electrodeposited) (Use: AMS-QQ-C-320)
- QQ-N-290 - Nickel Plating (Electrodeposited) (Replaced by AMS-QQ-N-290)
- QQ-P-35 - Passivation Treatments for Corrosion-Resistant Steel (Replaced by ASTM-A967 and AMS-QQ-A-35)
- QQ-P-416 - Plating, Cadmium (Electrodeposited) (Replaced by AMS-QQ-P-416)
- QQ-S-365 - Silver Plating, Electrodeposited: General Requirements for (Use ASTM-B700)
- QQ-Z-325 - Zinc Coating, Electrodeposited (Superseded by ASTM-B633)
- SAA-46 - Standards for Anodized Architectural Aluminum
- SS-112311 - Steel - Determination of lower yield stress and proof stress at elevated temperature
- SS-EN-12798 - Transport Quality Management System - Road, Rail and Inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety
- SS-EN-12981 - Coating plants - Spray booths for application of organic powder coating material - Safety requirements
- TT-C-490 - Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings)