FSC Standardization Area EMCS: Electromagnetic Compatibility
The following documents are a part of this series:- ANSI-C63.14 - American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)
- ANSI-C95.3 - IEEE Recommended Practice for the Measurement of Potentiallyhazardous Electromagnetic
- DI-EMCS-80157 - Suspected Radiofrequency Radiation (Rfr) Overexposure Report
- DI-EMCS-80199 - Electromagnetic Interference Control Procedures (EMICP)
- DI-EMCS-80200 - Electromagnetic Interference Test Report (EMITR)
- DI-EMCS-80201 - Electromagnetic Interference Test Procedures (EMITP)
- DI-EMCS-80217 - Tempest Assessment Report
- DI-EMCS-80218 - Request for Tempest Test
- DI-EMCS-80219 - Adverse Tempest Impact Statement
- DI-EMCS-80220 - Tempest Inspection Report
- DI-EMCS-81295 - Electromagnetic Effects Verification Procedures (Emevp)
- DI-EMCS-81296 - Electromagnetic Effects Verification Report (Emevr)
- DI-EMCS-81528 - Electromagnetic Compatibility Program Procedures
- DI-EMCS-81540 - Electromagnetic Environmental Effects (E3) Integration and Analysis Report (E31AR)
- DI-EMCS-81541 - Electromagnetic Environmental Effects (E3) Verification Procedures (E3VP)
- DI-EMCS-81542 - Electromagnetic Environmental Effects (E3) Verification Report (E3VR)
- DI-EMCS-81543 - Spectrum Supportability Risk Assessment (SSRA)
- DI-EMCS-81683 - Tempest Test Plan
- DI-EMCS-81684 - Tempest Test Evaluation Report
- DI-EMCS-81685 - Tempest Test Facility Certification Report
- DI-EMCS-81686 - Tempest Test Setup Ambient Signal Control Certification Report
- DI-EMCS-81687 - Tempest Control Plan
- DI-EMCS-81702 - Tempest Test Instrumentation Certification Report
- DI-EMCS-81777 - Electromagnetic Interference Survey (EMIS) Test Report
- DI-EMCS-81782 - Electromagnetic Interference Survey (EMIS) Test Procedures
- DI-EMCS-81827 - Spectrum Certification Spectral Characteristics Data
- DI-EMCS-81846 - Hemp Test Plan for System Verification Test
- DI-EMCS-81847 - HEMP Test Report for System Verification Test
- DI-EMCS-81848 - Test Plan for Production-Level Mission Critical Subsystem (MCS) Immunity Test (PMIT)
- DI-EMCS-81849 - Test Report for Production-Level MCS (Mission Critical Subsystem) Immunity Test (PMIT)
- DI-EMCS-81850 - Technical Report for MIL-STD-3023 Hardness Allocation
- DI-EMCS-81851 - HEMP Protection Subsystem Performance Test Plan
- DI-EMCS-81852 - HEMP Protection Subsystem Performance Test Report
- DI-EMCS-81853 - Test Plan for Mission Critical Subsystem Immunity Test
- DI-EMCS-81854 - Test Report for Mission Critical Subsystem Immunity Test
- DI-EMCS-81855 - High-Altitude EMP (HEMP) Hardness Maintenance and Hardness Surveillance (HM/HS) Plan
- DI-EMCS-82010 - Hemp Test Plan for Full Ship Verification Test
- DI-EMCS-82011 - Hemp Test Report for Full Ship Verification Test
- DI-EMCS-82012 - Hemp Technical Report for MIL-STD-4023 Hardness Allocation
- DI-EMCS-82013 - Hemp Protection Subsystem Performance Test Plan
- DI-EMCS-82014 - Hemp Protection Subsystem Performance Test Report
- DI-EMCS-82015 - Hemp Test Plan for Mission Critical System Immunity Test
- DI-EMCS-82016 - Hemp Test Report for Mission Critical System Immunity Test
- DI-EMCS-82017 - Hemp Hardness Maintenance and Hardness Surveillance (HM/HS) Plan
- DI-MGMT-81777 - Electromagnetic Interference Survey (Emis) Test Report
- DI-MGMT-81782 - Electromagnetic Interference Survey (Emis) Test Procedures
- DOD-STD-1795 - Lightning Protection of Aerospace Vehicles and Hardware (Classified, See Your Contracting Officer)
- MIL-A-17161 - Absorber, Radio Frequency Radiation (Microwave Absorbing Material), General Specification for (See Notice 1 for Replacement Information)
- MIL-E-55301 - Electromagnetic Compatibility (Use MIL-STD-461)
- MIL-E-6051 - Electromagnetic Compatibility Requirements, Systems (Superseded by MIL-STD-464)
- MIL-HDBK-1512 - Electroexplosive Subsystems, Electroexplosive Subsystems, Electrically Initiated, Design Requirements and Test Methods
- MIL-HDBK-1857 - Grounding, Bonding and Shielding Design Practices
- MIL-HDBK-235/1 - Military Operational Electromagnetic Environment Profiles, Part 1C General Guidance
- MIL-HDBK-235/10 - Military Operational Electromagnetic Environment Profiles, Part 10: External Electromagnetic - Classified, See your contracting officer
- MIL-HDBK-235/2 - Military Operational EME Profiles Part 2D External Electromagnetic Environment Levels for U.S. Navy Surface Ship Operations - Classified, See your contracting officer
- MIL-HDBK-235/3 - Military Operational EME Profiles Part 3D External Electromagnetic Environment Levels for Space and Launch Vehicle Systems - Classified, See your contracting officer
- MIL-HDBK-235/4 - Military Operational EME Profiles Part 4D External Electromagnetic Environment Levels for Ground Systems - Classified, See your contracting officer
- MIL-HDBK-235/5 - Military Operational EME Profiles Part 5D External Electromagnetic Environment for Rotary-Wing Aircraft, Excluding U.S. Shipboard Operations - Classified, See your contracting officer
- MIL-HDBK-235/6 - Military Operational EME Profiles Part 6D External Electromagnetic Environment Levels for Fixed-Wing Aircraft, Excluding U.S. Shipboard Operations - Classified, See your contracting officer
- MIL-HDBK-235/7 - Military Operational Electromagnetic Environment Profiles Part 7 External Electromagnetic Environment Levels for Ordnance - Classified, See Your Contracting Officer
- MIL-HDBK-235/8 - Military Operational EME Profiles Part 8 External Electromagnetic Environment Levels for High-Power Microwave Systems - CLASSIFIED - SEE YOUR CONTRACTING OFFICER
- MIL-HDBK-235/9 - Military Operational EME Profiles Part 9D External Electromagnetic Environment Levels for Other U.S. Ships (Coast Guard, Military Sealift Command, and Army Ships) - Classified, See your contracting officer
- MIL-HDBK-237 - Electromagnetic Environmental Effects and Spectrum Supportability Guidance for the Acquisition Process
- MIL-HDBK-238 - Electromagnetic Radiation Hazards (No Superseding Document)
- MIL-HDBK-240 - Hazards of Electromagnetic Radiation To Ordnance Test Guide
- MIL-HDBK-240-1 - Electromagnetic Environmental Effects to Ordnance Guide Part 1 General Guidance
- MIL-HDBK-240-2 - Electromagnetic Environmental Effects to Ordnance Guide Part 2 Hazards of Electromagnetic Radiation to Ordnance Testing
- MIL-HDBK-240-3 - Electromagnetic Environmental Effects to Ordnance Guide Part 3 Electrostatic Discharge to Ordnance
- MIL-HDBK-240-4 - Electromagnetic Environmental Effects to Ordnance Guide Part 4 External Radio Frequency Electromagnetic Environments
- MIL-HDBK-240-5 - Electromagnetic Environmental Effects to Ordnance Guide Part 5 Lightning Effects to Ordnance
- MIL-HDBK-240-6 - Electromagnetic Environmental Effects to Ordnance Guide Part 6 Characterization of the Electromagnetic Environment for HERO
- MIL-HDBK-241 - Design Guide for Emi Reduction in Power Supplies (No Superseding Document)
- MIL-HDBK-253 - Guidance for the Design and Test of Systems Protected Against the Effects of Electromagnetic Energy (No Superseding Document)
- MIL-HDBK-274 - Electrical Grounding for Aircraft Safety
- MIL-HDBK-293 - Electronic Counter-Countermeasures Considerations in Radar Systems Acquisition
- MIL-HDBK-294 - Electronic Counter-Countermeasures Considerations in Naval Communication Systems
- MIL-HDBK-335 - Management and Design Guidance Electromagnetic Radiation Hardness for Air Launched Ordnance Systems
- MIL-HDBK-419/1 - Grounding, Bonding and Shielding for Electronic Equipments and Facilities, Volume I: Basic Theory
- MIL-HDBK-419/2 - Grounding, Bonding, and Shielding for Electronic Equipments and Facilities, Applications, Volume II: Applications
- MIL-STD-1310 - Shipboard Bonding, Grounding, and other Techniques for Electromagnetic Compatibility, Electromagnetic Pulse (EMP) Mitigation, and Safety
- MIL-STD-1377 - Effectiveness of Cable, Connector, and Weapon Enclosure Shielding and Filters in Precluding Hazards of Electromagnetic Radiation To Ordnance, Measurement Of
- MIL-STD-1385 - Preclusion of Ordnance Hazards in Electromagnetic Fields, General Requirements for (Superseded by MIL-STD-464)
- MIL-STD-1512 - Electroexplosive Subsystems, Electrically Initiated, Design Requirements and Test Methods (Superseded by MIL-HDBK-1512)
- MIL-STD-1541 - Electromagnetic Compatibility Requirements for Space Systems (Future Acquisitions may refer to: SMC-S-008, AIAA-S-121, and MIL-STD-464)
- MIL-STD-1542 - Electromagnetic Compatibility and Grounding Requirements for Space System Facilities
- MIL-STD-1605 - Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship)
- MIL-STD-1757 - Lightning Qualification Test Techniques for Aerospace Vehicles and Hardware
- MIL-STD-1795 - Lighting Protection of Aerospace Vehicles and Hardware (No Superseding Document)
- MIL-STD-1818 - Electromagnetic Effects Requirements for Systems (Superseded by MIL-STD-464)
- MIL-STD-1857 - Grounding, Bonding and Shielding Design Practices (Superseded by MIL-HDBK-1857)
- MIL-STD-2169 - High-Altitude Electromagnetic Pulse (HEMP) Environment
- MIL-STD-220 - Method of Insertion Loss Measurement
- MIL-STD-285 - Attenuation Measurements for Enclosures, Electromagnetic Shielding, for Electronic Test Purposes, Method of (Superseded by IEEE299)
- MIL-STD-3023 - High-Altitude Electromagnetic Pulse (HEMP) Protection for Military Aircraft (Classified - Not publicly available - See Your Contracting Officer)
- MIL-STD-4023 - High-Altitude Electromagnetic Pulse (HEMP) Protection for Military Surface Ships - CLASSIFIED - SEE YOUR CONTRACTING OFFICER
- MIL-STD-449 - Radio Frequency Spectrum Characteristics Measurement of
- MIL-STD-461 - Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment
- MIL-STD-462 - Measurement of Electromagntic Interference Characteristics (Superseded by MIL-STD-461)
- MIL-STD-463 - Definitions and System of Units, Electromagnetic Interference and Electromagnetic Compatibility Technology (Superseded by IEEE-C63.14)
- MIL-STD-464 - Electromagnetic Environmental Effects Requirements for Systems
- MIL-STD-469 - Radar Engineering Interface Requirements, Electromagnetic Compatibility
- MIL-STD-826 - Electromagnetic Interference Test Requirements and Test Methods (for Future Procurement See MIL-STD-461 and MIL-STD-462)
- SAE-J551 - Performance Levels & Methods of Measurement of Electromagnetsee J551/1 . . . Etc.