Document Center is acquired by Nimonik

FSC 9515: Plate, Sheet, Strip, Foil, and Leaf

The following documents are a part of this series:

ASTM:

• ASTM-A1011 - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM-A1018 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM-A240 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
• ASTM-A308 - Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process (Withdrawn 2015)
• ASTM-A525 - Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process
• ASTM-A525M - Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Metric) Withdrawn 1994
• ASTM-A611 - Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)
• ASTM-A620 - Standard Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)
• ASTM-A622 - Standard Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000)
• ASTM-A642 - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Drawing Qu
• ASTM-A715 - Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, With Improved Formability (Withdrawn 2000)
• ASTM-A794 - Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 Maximum to 0.25 Maximum), Cold-Rolled
• ASTM-A806 - Specification for Steel Sheet, 55% Aluminum-Zinc Alloy Coated by the Hot-Dip Process for S
• ASTM-A907 - Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality (Withdrawn 2001)

ISO:

• ISO-3575 - Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities

US GOVERNMENT DOCUMENTS:

• A-A-52167 - Fiber Metal, Sheet, Nickel Base, Unbacked
• A-A-52313 - Steel Sheets, Corrugated: 2-1/2 Inch Nominal Corrugation, Painted or Unpainted
• AMS-2252 - Tolerances Low-Alloy Steel Sheet, Strip, and Plate
• AMS-5040 - Steel, Sheet and Strip, 0.15 Carbon, Maximum Deep Forming Grade
• AMS-5042 - Steel, Sheet and Strip, 0.15 Carbon, Maximum Forming Grade (STABILIZED Aug 2017)
• AMS-5046 - Carbon Steel, Sheet, Strip, and Plate (SAE 1020 and 1025)
• AMS-5121 - Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed
• AMS-5122 - Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper (STABILIZED Oct 2017)
• AMS-5221 - Iron-Nickel Alloy Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated
• AMS-5503 - Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr (SAE 51430) Annealed
• AMS-5504 - Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410), Annealed
• AMS-5505 - Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 12Cr (SAE 51410 Modified), Ferrite Controlled, Annealed
• AMS-5506 - Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 13Cr (0.30 - 0.40C) (SAE 51420), Annealed
• AMS-5507 - Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 17Cr - 13Ni - 2.5Mo (316L), Solution Heat Treated
• AMS-5508 - Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 13Cr - 2.0Ni - 3.0W, Annealed
• AMS-5509 - Sheet & Strip, Alloy Corrosion & Heat Resistant 15Cr-45NI-4W-4mo-3Ti-1Al Concumable Electr
• AMS-5520 - Steel, Corrosion & Heat-Resistant, Sheet, Strip, Foil, & Plate, 15Cr - 7.1NI - 2.5Mo - 1.1
• AMS-5521 - Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 25Cr - 20Ni (SAE 310S), Solution Heat Treated
• AMS-5523 - Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 23Cr - 13.5Ni (309S), Solution Heat Treated
• AMS-5525 - Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, 1800 Deg F (982 Deg C) Solution Heat Treated
• AMS-5526 - Steel Sheet, Strip, & Plate, Corrosion & Heat Resistant, 19.5Cr - 9.5NI - 1.4Mo - 1.4W - 0
• AMS-5530 - Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant, 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe, Solution Heat Treated (STABILIZED Apr 2017)
• AMS-5532 - Iron Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb(Nb) - 0.15N, Solution Heat Treated
• AMS-5536 - Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe, Solution Heat Treated
• AMS-5543 - Steel Sheet, Strip, & Plate, Corrosion & Heatresistant +Cancelled, 1991, No S/S Document+
• AMS-5544 - Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B, Consumable Electrode or Vacuum Induction Melted, Annealed
• AMS-5546 - Steel Sheet and Strip, Corrosion and Moderate Heat Resistant 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Cold Rolled, Tempered (STABILIZED Apr 2017)
• AMS-5549 - Steel, Corrosion and Heat Resistant, Plate 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated (STABILIZED Apr 2017)
• AMS-5550 - Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 80Ni - 15.5Cr - 0.62Ti - 3.25Al Annealed (STABILIZED Apr 2017)
• AMS-5551 - Sheet and Strip, Corrosion and Heat Resistant 55ni 19cr 10co 10mo 2.5ti 1.0a1 0.006b Consumable Electrode Or Vacuum Induction Melted, Solution Heat Treated (Cancelled Apr 1991)
• AMS-5552 - Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 46Fe - 20.5Cr - 32Ni - 1.1Ti, Annealed (Cancelled Apr 2011)
• AMS-5593 - Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated
• AMS-5594 - Steel Plate, Corrosion & Moderate Heat Resistant 15.5Cr-4.5NI-2.9mo-0.1N Equalized & Overt
• AMS-5595 - Steel, Corrosion Resistant, Sheet, Strip, & Plate, 9.0Mn - 20Cr - 6.5NI - 0.28N, Solution
• AMS-5597 - Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
• AMS-5601 - Steel Sheet & Strip, Corrosion & Moderate Heat Resistant 14.5Cr-8.2NI-25mo-1.1Al Solution
• AMS-5604 - Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable
• AMS-5608 - Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated
• AMS-5703 - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti, Consumable Electrode or Vacuum Induction Melted, 1750 Deg F (954 Deg C) Solution, Stabilization, and Precipitation Heat Treated
• AMS-5861 - Sheet Steel, Strip, & Plate, Corrosion Resistant 22Cr - 13NI- 5.0Mn - 2.25Mo
• AMS-5869 - Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated
• AMS-5871 - Alloy, Corrosion and Heat-Resistant, Sheet, Strip and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated
• AMS-5873 - Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La, Consumable Electrode Remelted, Solution Heat Treated
• AMS-5878 - Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 59Ni - 22Cr - 2Mo - 14W - 0.35AI - 0.03La, Solution Heat Treated
• AMS-5889 - Nickel Alloy, Corrosion & Heat Resistant, Sheet & Strip, 54NI - 22Cr - 12.5Co - 9.0Mo - 1.
• AMS-5901 - Steel, Corrosion Resistant, Sheet, Strip, & Plate, 18Cr - 8NI (SAE 30301), Solution Heat T
• AMS-5902 - Steel, Corrosion-Resistant, Sheet & Strip, 18Cr - 8NI (SAE 30301), Cold Rolled, 3/4 Hard,
• AMS-5903 - Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 18Cr - 9.0Ni (SAE 30302), Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
• AMS-5905 - Steel, Corrosion-Resistant, Sheet and Strip, 18Cr - 9.0Ni (SAE 30302), Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
• AMS-5907 - Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 17Cr - 12Ni - 2.5Mo (SAE 30316), Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
• AMS-5910 - Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength
• AMS-5912 - Steel, Corrosion Resistant, Sheet & Strip, 19Cr - 9.2NI (SAE30304), Cold Rolled, 3/4 Hard
• AMS-5913 - Steel, Corrosion Resistant, Sheet & Strip, 19Cr - 9.2NI (SAE30304), Cold Rolled, Full Har
• AMS-5914 - Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe, Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated
• AMS-6354 - Steel, Sheet, Strip, and Plate 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C)
• AMS-6359 - Steel, Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)
• AMS-6385 - Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)
• AMS-6433 - Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod)
• AMS-6434 - Steel, Sheet, Strip, and Plate 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) (Composition similar to UNS K33517)
• AMS-6436 - Steel Sheet, Strip & Plate, Low-Alloy, Heat Resistant, 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0
• AMS-6437 - Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11)
• AMS-6438 - Steel, Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.45 - 0.50C) Consumable Electrode Vacuum Melted (STABILIZED Aug 2016)
• AMS-6455 - Steel, Sheet, Strip, and Plate 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150)
• AMS-6520 - Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Melted, Solution Heat Treated (STABILIZED Nov 2016)
• AMS-6524 - Steel, Sheet, Strip, & Plate, 1.0Cr - 7.5NI - 4.5Co - 1.0mo- 0.09V (0.29 - 0.34C), Consum
• AMS-6532 - Steel, Bars and Forgings, and Forging Stock 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.23 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable
• AMS-6545 - Steel, Sheet, Strip, and Plate 0.48cr 8.0ni 4.0co 0.48mo 0.09v (0.24 - 0.30c) Annealed (Cancelled Feb 1965)
• AMS-6546 - Steel Sheet, Strip, and Plate 0.48cr 8.0ni 4.0co 0.48mo 0.09v (0.24-0.30c) Consumable Electrode Melted, Annealed (Cancelled Jul 2001)
• AMS-7711 - Steel Sheet & Strip, Flat-Rolled, Electrical, Non-Oriented,2.65(Si + Ai), Type 47S188 Or
• AMS-7712 - Steel Sheet & Strip, Flat-Rolled, Electrical, Non-Oriented,3.0(Si + Ai), Type 47S178 Or
• AMS-7715 - Steel, Flat Rolled Electrical 4.25Si AISI Type M-15, Semiprocessed +Cancelled, No S/S Doc+
• AMS-7728 - Iron-Nickel-Cobalt Alloy, Sheet, Strip, and Plate, 53Fe - 29Ni - 17Co, Low Expansion Glass Sealing, Annealed (STABILIZED Apr 2017)
• AMS-DTL-22499 - Shim Stock, Laminated
• AMS-DTL-22499/3 - Shim Stock, Laminated, Cres
• AMS-S-8840 - Steel Sheet & Strip, Corrosion-Resistant, Precipitation Hardening (Am350 & Am355), Premium
• AMS-S-8949 - Steel Bars, Plates, Sheets, Billets, & Reforging Stock Type D6Ac
• JAN-A-256 - Armor, Homogeneous, Rolled Steel, Aircraft Type (Superseded by MIL-A-46099)
• JAN-A-434 - Armor, Steel, Plate, Rolled Non-Magnetic (5/32 To 1 1/16 in. Incl.), Aircraft Type (No Superseding Document)
• JAN-S-1160 - Steel, Spring, Round or Square (Including Rectangular Sections Having Thicknesses Greater Than Half Their Width) (Use QQ-W-428, QQ-W-470, MIL-W-21081, MIL-W-21425, or MIL-S-46033 as Applicable)
• MAM-2252 - Tolerances, Metric, Low-Alloy Steel Sheet, Strip and Plate
• MIL-A-12560 - Armor Plate, Steel, Wrought, Homogeneous (for Use in Combat-Vehicles & for Ammunition
• MIL-A-13259 - Armor, Steel: Sheet, Strip, And Fabricated Forms; Rolled, Non-Magnetic; For Helmets And Personnel Armor Requirements (Cancelled, 1994, use MIL-L-62474, MIL-L-46197 and MIL-C-44050)
• MIL-A-46099 - Armor Plate, Steel, Roll-Bonded, DNAL Hardness (0.187 Inches to 0.700 Inches Inclusive
• MIL-A-46100 - Armor Plate, Steel, Wrought, High-Hardness
• MIL-A-46173 - Armor, Steel, Plate, Wrought, (Esr) (3/16 Through 3 Inches, Inclusive) (No Superseding Document)
• MIL-A-46177 - Armor, Steel Plate and Sheet, Wrought, Homogeneous (1/8 To Less Than 1/4 Inch Thick)
• MIL-A-46186 - Armor Plate, Steel, Wrought, High-Strength, High-Quality
• MIL-A-46193 - Armor Plate, Control Rolled, Steel, Wrought, High Strength, High Quality
• MIL-A-47228 - Alloy, High Permeability (No Superseding Document)
• MIL-DTL-11713 - Steel Strip, Carbon, Spring: for Mechanical Time Fuze Components
• MIL-DTL-12560 - Armor Plate, Steel, Wrought, Homogeneous (for Use in Combat-Vehicles and for Ammunition Testing)
• MIL-DTL-22499/3 - Shim Stock, Laminated, Cres (Superseded by SAE AMS-DTL-22499/3)
• MIL-DTL-22499/4 - Shim Stock, Laminated, Carbon Steel (Superseded by SAE AMS-DTL-22499/4)
• MIL-DTL-23196 - Steel Plate, Corrosion Resistant (UNS S30400/S30403, S31600/S31603, S31703, S34700, and S34800) (Classified - See Your Contracting Officer)
• MIL-DTL-32332 - Armor Plate, Steel, Wrought, Ultra-High-Hardness
• MIL-DTL-46100 - Armor Plate, Steel, Wrought, High-Hardness
• MIL-DTL-46177 - Armor, Steel Plate and Sheet, Wrought, Homogeneous (1/8 to Less Than 1/4 Inch Thick)
• MIL-DTL-46193 - Armor Plate, Control Rolled, Steel, Wrought, High Strength, High Quality
• MIL-F-20138 - Floor Plate, Corrosion Resistant Steel, Rolled
• MIL-F-62453 - Fiber Metal, Sheet, Nickel Base, Unbacked (Superseded by A-A-52167)
• MIL-I-20144 - Iron, Wrought, Plates, Black
• MIL-I-20149 - Iron, Wrought, Sheet, Black and Zinc Coated (Galvanized).
• MIL-I-7495 - Iron, Sheet (for Porcelain Enameling) (Supersedes 10246)
• MIL-M-11473 - Magnetic Particle Inspection, Soundness Requirements for Weldments (Superseded BYASTM-E125)
• MIL-N-22840 - Nickel, Iron Alloy (50 Percent Nickel) Strip, Bar and Rod, for Magnetic Applications (No Superseding Document)
• MIL-P-13326 - Plate, Metal, Steel Alloy; Heat Treated, High Strength; for Welded Structures
• MIL-P-18124 - Panel, Armor, Steel Encased Aggregate and Binder
• MIL-P-47183 - Plate, Steel, Corrosion Resisting (No Superseding Document)
• MIL-PRF-32269 - Perforated Homogeneous Steel Armor
• MIL-S-11207 - Steel Sheets, Corrugated, 2-1/2-Inch Nominal Corrugations, Painted or Unpainted (Superseded by A-A-52313)
• MIL-S-11713 - Steel Strip, Carbon, Spring: for Mechanical Time Fuze Components
• MIL-S-12875 - Sheet, Preforated, Metal
• MIL-S-13326 - Steel, Alloy, Plate, Heat Treated, High Strength; for Welded Structures (SEE MIL-P-13326 REVISION D - NEW TITLE)
• MIL-S-13812 - Steel Plate, Wrought, Homogeneous for Ammunition Testing (1/4 To 12 Inches Incl.) (Superseded by MIL-A-12560)
• MIL-S-16113 - Steel Plate, High Tensile (Ht), Hull and Structural (Superseded by MIL-S-22698)
• MIL-S-16216 - Steel Plate, Alloy, Structural, High Yield Strength (HY-80 and HY-100)
• MIL-S-16538 - Steel, Alloy, Forgings (for Special High Temperature Applications)
• MIL-S-16997 - Steel, Sheet, Electrical (Use AMS-7711)
• MIL-S-17919 - Steel Strip and Flat Bar, Carbon and Alloy (for Springs) (Navy)
• MIL-S-17996 - Steel Sheet and Other Wrought Forms, Corrosion Resisting, Austenitic (Low Magnetic Permeability), Chromium-Manganese-Nickel (Refer To QQ-S-766)
• MIL-S-18171 - Steel, Plate, Sheet, and Strip, Corrosion Resisting, Radioactive System Service
• MIL-S-18728 - Steel Plate, Sheet, and Strip, Alloy, 8630, Aircraft Quality (Superseded by SAE AMS-6350, SAE AMS-6351 or SAE AMS-6345)
• MIL-S-18729 - Steel Plate, Sheet, and Strip, Alloy, 4130, Aircraft Quality (Superseded by SAE AMS-6350, SAE AMS-6351 or SAE AMS-6345)
• MIL-S-18731 - STEEL, ALLOY, SHEET and STRIP, (6150), AIRCRAFT QUALITY (SEE AMS-6455)
• MIL-S-18733 - STEEL PLATE, SHEET, and STRIP, ALLOY (4135), AIRCRAFT QUALITY (SEE AMS-6352)
• MIL-S-18957 - Steel Deck Plates, Dimpled, and Dimpled and Tie-Down Fitted
• MIL-S-19315 - Steel Plate, Alloy, Structural and Protective Application
• MIL-S-19795 - Steel Plate, Alloy, Structural, High Yield Strength, General Purpose
• MIL-S-20143 - Steel, Sheet, for the Manufacture of Metal Furniture (Use QQ-S-692)
• MIL-S-20147 - Steel, Nickel, Plate
• MIL-S-20154 - Steel, Plate, Special-Treatment, for Protective Hull Plating
• MIL-S-21515 - Steel Bars, Plates, Sheets and Strips, 4335, Modified Vacuum Melted (Asg) (Superseded by SAE AMS-6429)
• MIL-S-22499/3 - Shim Stock, Laminated, Cres
• MIL-S-22499/4 - Shim Stock, Laminated, Carbon Steel
• MIL-S-22698 - Steel Plate, Shapes and Bars, Weldable Ordinary Strength and Higher Strength: Structural
• MIL-S-23196 - Steel Plate, Sheet and Strip, Corrosion Resistant (Classified - See Your Contracting Officer)
• MIL-S-24094 - Steel Plate, High Tensile (Ht), Hull and Structural (Use MIL-S-16113)
• MIL-S-24113 - Steel Plates, Carbon Mananese - Heat Treated by Normalizing or Quenching and Tempering (Superseded by MIL-S-22698)
• MIL-S-24238 - Steel Plate Carbon and Low Alloy (Classified - See Your Contracting Officer)
• MIL-S-24286 - Steel Armor Plate, Wrought, High Hardness (Superseded by MIL-S-16216)
• MIL-S-24371 - Steel Plate, Structural, High Yield Strength (HY-130)
• MIL-S-24451 - Steel Heat Treated Heads, Alloy Structural, High Yield Strength (HY-80 and HY-100)
• MIL-S-24645 - Steel Plate, Sheet, or Coil, Age-Hardening Alloy, Structural, High Yield Strength (HSLA-80 and HSLA-100)
• MIL-S-25043 - Steel Plate, Sheet, and Strip, 17-7 Ph, Corrosion Resistant, Precipitation Hardening (Superseded by SAE AMS-5528 or SAE AMS-5529)
• MIL-S-3039 - Steel, Strap, High Carbon, Spheriodized Annealed (for Ammunition Cartridge Clips)
• MIL-S-3289 - Steel, Plate and Disk, Carbon, Forging Quality
• MIL-S-4043 - Steel; Corrosion-Resisting (Extra Low Carbon Type 304), Plate, Sheet, and Strip (Superseded by SAE AMS-5511)
• MIL-S-4174 - STEEL SHEET AND STRIP, FLAT, ALUMINUM COATED LOW CARBON (Cancelled, 1989, Superseded BY SAE AMS-5036 AND ASTM-A463)
• MIL-S-46044 - Steel, Expanded Sheet, Corrosion-Resisting
• MIL-S-46049 - Strip, Metal, Carbon Steel, Cold Rolled, Hardened and Tempered Spring Quality
• MIL-S-46055 - STEEL, SHEET and STRIP, LOW CARBON CHROMIZED (SUPERSEDED BY ASTM-A167 AND ASTM-A176)
• MIL-S-46084 - Steel, Silicon, Sheet and Strip, Electrical (No Superseding Document)
• MIL-S-46188 - Steel Plate, Wrought, Homogeneous Electroslag Remelt (Esr) (4340 Alloy (No Superseding Document)
• MIL-S-46850 - Steel: Bar, Plate, Sheet, Strip, Forgings, and Extrusions, 18 Percent Nickel Alloy, Maraging, 200 Ksi, 250 Ksi, 300 Ksi, and 350 Ksi, High Quality
• MIL-S-47038 - Steel, Carbon, High Strength Low Alloy, Precipitation Hardening (No Superseding Document)
• MIL-S-47263 - Steel, Alloy, Type D6Ac (Modified) (No Superseding Document)
• MIL-S-47264 - Steel, Alloy, Type D-6a (No Superseding Document)
• MIL-S-47319 - Steel, Bar, Billet and Forgings Cobalt-Free Maraging
• MIL-S-48403 - Steel Sheet, Hot-Dip, Zinc-Coated (Galvanized), Minimized Spangle, For Automotive Vehicle Body Use
• MIL-S-5059 - Steel, Corrosion Resistant (18-8) Plate, Sheet and Strip (Superseded by SAE AMS-5513, SAE AMS-5910 Thru 5913, SAE AMS-5524, SAE AMS-5516 Thru 5519, SAE AMS-5901 Thru 5907)
• MIL-S-645 - Strip Metal, Carbon Steel, Cold Rolled, Drawing Quality, Special Killed (for Ammunition Components)
• MIL-S-6721 - STEEL, CORROSION and HEAT RESISTANT (CHEMICALLY STABILIZED) PLATE, SHEET and STRIP (SEE AMS-5512 and AMS-5510)
• MIL-S-7947 - Steel, Sheet and Strip (1095) (Aircraft Quality) (Superseded by SAE AMS-5121 and SAE AMS-5122)
• MIL-S-7952 - Steel, Sheet and Strip, Uncoated, Carbon (1020 and 1025) (Aircraft Quality) (Superseded by SAE AMS-5046)
• MIL-S-81506 - STEEL PLATE, SHEET, and STRIP, 17 4PH, CORROSION RESISTANT, PRECIPITATION HARDENING (SUPERSEDED BY SAE AMS-5604)
• MIL-S-854 - Steel, Corrosion-Resisting, Plates, Sheets, Strip
• MIL-S-871 - Steel Plate, Carbon-Molybdenum Alloy and Manganese-Molybdenum Alloy, Hot Rolled
• MIL-S-8840 - Steel Sheet and Strip, Corrosion-Resistant, Precipitation Hardening (Am350 and Am355), Premium Quality (Superseded by SAE AMS-S-8840)
• MIL-S-8949 - Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6Ac (Users May Refer To SAE AMS-S-8949 as a Possible Replacement)
• MIL-S-8955 - Steel Plate, Sheet and Strip, Ph 15-7 Mo Corrosion-Resistant, Precipitation Hardening (Superseded by SAE AMS-5520)
• MS-14445 - Plate, Metal, Corrosion Resistant, Type 302 (No Superseding Document)
• MS-14446 - Plate, Metal, Corrosion Resistant, Type 304 (No Superseding Document)
• MS-14447 - Plate, Metal, Corrosion Resistant, Type 304l (No Superseding Document)
• MS-14448 - Plate, Metal, Corrosion Resistant, Type 310 (No Superseding Document)
• MS-14449 - Plate, Metal, Corrosion Resistant, Type 316 (No Superseding Document)
• MS-14450 - Plate, Metal, Corrosion Resistant, Type 316l (No Superseding Document)
• MS-14451 - Plate, Metal, Corrosion Resistant, Type 321 (No Superseding Document)
• MS-14452 - Plate, Metal, Corrosion Resistant, Type 347 (No Superseding Document)
• MS-14453 - Plate, Metal, Corrosion Resistant, Type 410 (No Superseding Document)
• MS-14454 - Plate, Metal, Corrosion Resistant, Type 430 (No Superseding Document)
• MS-14455 - Sheet, Metal Corrosion Resistant, Type 301 (No Superseding Document)
• MS-14456 - Sheet, Metal Corrosion Resistant, Type 302 (No Superseding Document)
• MS-14457 - Sheet, Metal, Corrosion Resistant, Type 304 (No Superseding Document)
• MS-14458 - Sheet, Metal, Corrosion Resistant, Type 309 (No Superseding Document)
• MS-14459 - Sheet, Metal, Corrosion Resistant, Type 310 (No Superseding Document)
• MS-14460 - Sheet, Metal, Corrosion Resistant, Type 316 (No Superseding Document)
• MS-14461 - Sheet, Metal, Corrosion Resistant, Type 316l (No Superseding Document)
• MS-14462 - Sheet, Metal, Corrosion Resistant, Type 321 (No Superseding Document)
• MS-14463 - Sheet, Metal, Corrosion Resistant, Type 347 (No Superseding Document)
• MS-14464 - Sheet, Metal, Corrosion Resistant, Type 410 (No Superseding Document)
• MS-14465 - Sheet, Metal, Corrosion Resistant, Type 430 (No Superseding Document)
• MS-14466 - Strip, Metal, Corrosion Resistant, Type 302 (No Superseding Document)
• MS-14467 - Strip, Metal, Corrosion Resistant, Type 304 (No Superseding Document)
• MS-14468 - Strip, Metal, Corrosion Resistant, Type 316 (No Superseding Document)
• MS-14501 - Foil, Metal, Corrosion Resistant, Type 301 (No Superseding Document)
• MS-14502 - Foil, Metal, Corrosion Resistant, Type 302 (No Superseding Document)
• MS-14503 - Plate, Steel, Corrosion Resistant, Type 301 (No Superseding Document)
• MS-14504 - Plate, Steel, Corrosion Resistant, Type 302 (No Superseding Document)
• MS-14505 - Plate, Steel, Corrosion Resistant, Type 304 (No Superseding Document)
• MS-14506 - Sheet, Metal, Corrosion Resistant, Type 301 (No Superseding Document)
• MS-14507 - Sheet, Metal, Corrosion Resistant, Type 302 (No Superseding Document)
• MS-14508 - Sheet, Metal, Corrosion Resistant, Type 304 (No Superseding Document)
• MS-14509 - Sheet, Metal, Corrosion Resistant, Type 316 (No Superseding Document)
• MS-14510 - Strip, Metal, Corrosion Resistant, Type 301 (No Superseding Document)
• MS-14511 - Strip, Metal, Corrosion Resistant, Type 302 (No Superseding Document)
• MS-14512 - Strip, Metal, Corrosion Resistant, Type 304 (Aerospace) (No Superseding Document)
• MS-14513 - Strip, Metal, Corrosion Resistant, Type 316 (Aerospace) (No Superseding Document)
• MS-14514 - Sheet, Perforated, Metal, Straight, Corrosion Resistant, Type 304 (Aerospace) (No Superseding Document)
• MS-14515 - Sheet, Perforated, Metal, Staggered 60 Deg., Corrosion Resistant, Type 301 (Aerospace) (No Superseding Document)
• MS-15158 - Tee Joint Specimen (Coupon) for Thermal Shock Test
• MS-33520 - Tolerance, Corrosion Resistant Steel Plate, Sheet and Strip (Use Fed-STD-48)
• MS-33564 - Standard Lengths and Widths, Metal Sheets and Strips
• MS-52038 - Strip, Metal, Low Carbon Steel (1010) Cold Rolled (No Superseding Document)
• MS-52039 - Strip, Metal, Low Carbon Steel (1015) Cold and Hot Rolled (No Superseding Document)
• MS-52040 - Strip, Metal, Low Carbon Steel (1018) Cold Rolled (No Superseding Document)
• MS-52041 - Strip, Metal, Low Carbon Steel (1020) Cold Rolled (No Superseding Document)
• MS-52042 - Sheet, Metal, Low Carbon Steel (1010) Cold and Hot Rolled (No Superseding Document)
• MS-52043 - Sheet, Metal, Low Carbon Steel (1015) Cold and Hot Rolled (No Superseding Document)
• MS-52044 - Sheet, Metal, Low Carbon Steel (1018) Cold and Hot Rolled (No Superseding Document)
• MS-52087 - Strip, Tool Steel, Type O1 (No Superseding Document)
• MS-52088 - Plate, Tool Steel, Type 01 (No Superseding Document)
• MS-52089 - Strip, Tool Steel, Type W1 (No Superseding Document)
• MS-52090 - Strip, Tool Steel, Type W2 (No Superseding Document)
• MS-90504 - Plate, Steel, Carbon, Medium (No Superseding Document)
• MS-90505 - Sheet, Steel, Carbon, Medium (No Superseding Document)
• QQ-F-455 - Floor Plate, Steel, Rolled (Modular, for Concrete Floors) +Canc, 1974, Use TT-C-535
• QQ-F-461 - Floor Plate, Steel, Rolled +Cancelled, 1985, Superseded By ASTM-a786
• QQ-I-716 - Iron and Steel, Sheet, Zinc-Coated (Galvanized) +Cancelled,1960, Superseded By QQ-S-775
• QQ-S-626 - Steel Plate, Alloy (Structural Quality)
• QQ-S-627 - Steel Alloy, Sheet and Strip, Hot-Rolled +Cancelled, 1974, Use ASTM-a505,-a506 & -a507
• QQ-S-629 - Steel, Alloy, Tubing, Mechanical Round, Seamless & Welded +Cancelled, 1963, No S/S Doc
• QQ-S-635 - Steel Plate, Carbon
• QQ-S-636 - Steel, Carbon (Low-Carbon), Sheets & Strips
• QQ-S-640 - Steel, Carbon, Sheet and Strip (Cancelled, 1963, No S/S Document)
• QQ-S-643 - Steel, Carbon, Tubing, Mechanical, Round, Seamless +Cancelled, 1959, Superseded By QQ-T-830
• QQ-S-682 - Steel, Corrosion-Resisting-Clad Plates, Sheet
• QQ-S-691 - Steel Plate, Carbon Silicon,Carbon Molybdenum
• QQ-S-692 - Steel, Sheets, Carbon, Cold-Rolled
• QQ-S-693 - Steel, Sheet, Carbon, Hot-Rolled
• QQ-S-695 - Steel, Sheet, for the Manufacture of Metal Furniture
• QQ-S-698 - Steel, Sheet & Strip, Low-Carbon
• QQ-S-699 - Steel Sheets, Carbon, Hot-Rolled Heavy Gage Structual +Cancelled, 1974, No S/S Documen
• QQ-S-700 - Steel Sheet & Strip, Medium & High Carbon
• QQ-S-701 - Steel; Staybolt (Boiler), Federal Standard Stock Catalogue Section Iv (Part 5) Federal
• QQ-S-766 - Steel, Stainless and Heat Resisting, Alloys, Plate, Sheet and Strip
• QQ-S-775 - Steel Sheets, Carbon, Zinc-Coated (Galvanized) by the Hot-Dipped Process
• QQ-S-777 - Steel, Carbon, Strip, Cold Rolled, Untemperedspring Quality+Canc, 1975, No S/S Doc.+
• QQ-T-181 - Terne Plates (for Manufacturing Purposes) +Cancelled, 1963,Use QQ-T-191
• QQ-T-191 - Terne Sheet (Long and Short Terne) +Cancelled, 1978, No S/Sdocument+
• QQ-T-201 - Terneplate, for Roofing and Roofing Products
• QQ-T-425 - Tin Plate (Electrolytic)