Document Center is acquired by Nimonik

FSC 3120: Bearings, Plain, Unmounted

The following documents are a part of this series:

ASTM:

• ASTM-B328 - Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings (Withdrawn 2009)
• ASTM-B612 - Iron Bronze Sintered Bearings (Oil-Impregnated)
• ASTM-B782 - Standard Specification for Iron Graphite Sintered Bearings (Oil-Impregnated) (Withdrawn 2007)

US GOVERNMENT DOCUMENTS:

• A-A-50602 - Self-Lubricated Bearings
• A-A-52401 - Bearing, Sleeve (Steel-Backed)
• AMS-4800 - Bearings, Babbitt, 91Sn - 4.5Sb - 4.5Cu
• AMS-4805 - Bearings, Sintered Metal Powder, 89Cu - 10Sn, Oil Impregnated (Cancelled Apr 2007)
• AMS-4815 - Bearings, Silver Plated Steel Back
• AMS-4816 - Bearings, Silver-Clad Steel Strip
• AMS-4820 - Bearings, Leaded Copper 70Cu - 28.5Pb Steel Back
• AMS-4822 - Bearings, Leaded Bronze, 71.5Cu - 25Pb - 3.0Sn, Steel Back
• AMS-4827 - Bearings, Leaded Bronze 80Cu - 10Pb - 10Sn Steel Back
• AMS-7238 - Alloy Pm Shapes, Corrosion, Wear, & Heat Resistant, 66Co - 30Cr - 8.25W (1.10 - 1.90C)
• AMS-7239 - Alloy Pm Shapes, Corrosion, Wear, & Heat Resistant 60Co - 29Cr - 4.5W (0.90 - 1.40C)
• AMS-7440 - Balls, Steel, Low-Chromium, High Carbon Hardened and Tempered (STABILIZED Jan 2016)
• AMS-7445 - Balls, Steel, Corrosion-Resistant, 17Cr, Annealed (STABILIZED Jun 2017)
• AN-942 - Bearing, Plain, Heavy Duty, Self Aligning, Airframe (Cancelled, 1971, No Superseding Document)
• AN-943 - Bearing - Rod End, Internal Thread, Self - Aligning, Plain, Airframe
• AN-947 - Bearing - Rod End, External Thread, Self - Aligning, Plain, Airframe
• AS-14101 - Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Narrow, Grooved Outer Ring, -65° to 325°F
• AS-14102 - Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed,Wide, Chamfered Race, -65 To 3
• AS-14103 - Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed,Wide, Grooved Race, -65 To
• AS-14104 - Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Narrow, Chamfered Race, -65 To
• AS-14237 - Bushing, Sleeve Plain, Press Fit, Ream Type
• AS-14238 - Bushing, Sleeve Flanged, Press Fit, Ream Type.
• AS-21154 - Bearing, Plain, Self-Aligning, Grooved Outer Ring
• AS-21155 - Bearing, Plain, Self-Aligning, Chamfered, Outer Ring
• AS-21230 - Bearing, Plain, Self-Aligning, Grooved Outer Ringer PTFE Lined, Wide
• AS-21231 - Bearing, Plain, Self-Aligning, PTFE Lined, Wide
• AS-21232 - Bearing, Plain, Self-Aligning, Groove Outer Ring, PTFE Lined, Narrow
• AS-21233 - Bearing, Plain, Self-Aligning, PTFE Lined, Narrow
• AS-21240 - Bearing, Sleeve, Plain, Self-Lubricating -65 To 250 Degreesf
• AS-21241 - Bearin, Sleeve, Flanged, Self-Lubricating -65 To +250 Degrees F
• AS-3268 - Sleeve Half - Reinforcing, Tube
• AS-3269 - Sleeve Half - Reinforcing, Tube, Shoulder
• AS-81819 - Bearings, Plain, Self-Aligning, Self-Lubricating, High Speed Oscillation -65 to +160 DegF General Specification For
• AS-81819/1 - Bearings, Plain, Self-Lubricating, Self-Aligning, High Speed Oscillation -65 To +160
• AS-81820/1 - BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, -65 TO +32+325 °F
• AS-81820/2 - Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore,Low Speed, Wide, Chamfered RA
• AS-81820/3 - Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore,Low Speed, Wide, Grooved Race
• AS-81820/4 - Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore,Low Speed, Narrow, Chamfered
• AS-81934/1 - Bearing, Sleeve, Plain, Self-Lubricating, -65 Deg F To 325 Deg F
• AS-81934/2 - Bearing, Sleeve, Flanged, Self-Lubricating, -65 Deg F To 325 Deg F
• AS-81935 - Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For (-65 to +325 Deg F)
• AS-81935/1 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, -65 to +325 Deg F
• AS-81935/2 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Internally Threaded, -65 to +325 Deg F
• AS-81935/4 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Externally Threaded, -65 to +325 degrees F
• AS-81935/5 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Internally Threaded -65 to +325 Deg F
• AS-81935/6 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, Steel, Corrosion Resistant (CRES) -65 to +325 Deg F
• AS-81935/7 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Internally Threaded, Steel, Corrosion Resistant (CRES) -65 to +325 Deg F
• AS-81935/8 - Bearing, Plain, Rod End, Self Aligning, Self Lubricating, Narrow, Externally Threaded, Steel, Corrosion Resistant (CRES) -65 to +325 Deg F
• AS-81935/9 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Internally Threaded, Corrosion Resistant (CRES) -65 to +325 Deg F
• AS-81936 - BEARINGS, PLAIN, SELF-ALIGNING, (Cu-BE BALL, CRES RACE) GENERAL SPECIFICATION FOR
• AS-81936/1 - Bearing, Plain, Self-Aligning, CU-Be Ball, Cres Race, With Grooved Race) -65Mdf To +35
• AS-81936/2 - Bearing, Plain, Self-Aligning, CU-Be Ball, Cres Race, (Chamfered Race) -65Mdf To +350m
• AS-85560 - Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification For
• AS-85560/1 - Bearing, Fiber Reinforced Plastic, Sleeve, Plain, Self Lubricating, +250 Deg F
• AS-85560/2 - Bearing, Fiber Reinforced Plastic, Sleeve, Flanged, Self-Lubricating, +250 Deg F
• AS-8943 - Bearings, Sleeve, Plain & Flanged, Self-Lubricating -65 To +250 Degrees F
• AS-8976 - Bearings, Plain, Self-Aligning, All Metal, General Specification for
• DOD-STD-2183 - Bond Testing, Babbitt Lined Bearings
• DOD-STD-2188 - Babitting of Bearing Shells
• FF-B-195 - Bearing, Sleeve, (Bronze, Plain or Flanged)
• MIL-B-13501 - Bearings and Bushings, Brass and Bronze, Machined or Formed
• MIL-B-13506 - Bearing, Sleeve (Steel-Backed) (Superseded by A-A-52401)
• MIL-B-22852 - Bond Testing, Babbitt Lined Bearings (Superseded by DOD-STD-2183)
• MIL-B-25870 - Bearing, Sintered Metal, Processing Of
• MIL-B-5628 - Bearings, Plain, Airframe (Sueprseded by MIL-B-8976)
• MIL-B-5629 - Bearings, Rod End, Plain, Airframe (No Superseding Document)
• MIL-B-5687 - Bearings, Sleeve, Washers, Thrust, Sintered, Metal Powder, Oil-Impregnated, General Specification for
• MIL-B-81819 - Bearing, Plain, (Self-Aligning, Sleeve and Thrust) Self-Lubricating, High Speed Oscillation (No Superseding Document)
• MIL-B-81819/1 - Bearing, Plain, Sliding Spherical, Self Lubricating, Self Aligning, High Speed Oscillation (No Superseding Document)
• MIL-B-81820 - Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation, General Specification for (Superseded by SAE as-81820)
• MIL-B-81820/1 - Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring, -65 Deg. To 325 Deg. F (Superseded by SAE as-81820/1)
• MIL-B-81820/2 - Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Chamfered Outer Ring, -65 Deg. To 325 Deg. F (Superseded by SAE as-81820/2)
• MIL-B-81820/3 - Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Outer Ring, -65 Deg. To 325 Deg. F (Superseded by SAE as-81820/3)
• MIL-B-81820/4 - Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Chamfered Outer Ring, -65 Deg. To 325 Deg. F (Superseded by SAE as-81820/4)
• MIL-B-81934 - Bearings, Sleeve, Plain and Flanged, Self-Lubricating, General Specification for (Superseded by SAE as-81934)
• MIL-B-81934/1 - Bearing, Sleeve, Plain, Self-Lubricating, 325 Deg. F (Superseded by SAE AS-81934/1)
• MIL-B-81934/2 - Bearing, Sleeve, Flanged, Self-Lubricating, 325 Deg. F (Superseded by SAE as-81934/2)
• MIL-B-81935 - Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification for (Superseded by SAE as-81935)
• MIL-B-81935/1 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, -65 Deg. F To +325 Deg. F (Superseded by SAE as-81935/1)
• MIL-B-81935/2 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Internally Threaded, -65 Deg. F To +325 Deg. F (Superseded by SAE as-81935/2)
• MIL-B-81935/4 - Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Externally Threaded, -65 Deg. F To +325 Deg. F (Superseded by SAE as-81935/4)
• MIL-B-81935/5 - Bearing, Plain, Rod End, Self-Aligning, Self Lubricating, Narrow, Internally Threaded, -65 Deg. F To +325 Deg. F (Superseded by SAE as-81935/5)
• MIL-B-81935/COMPLETE - Complete Set of Slash Sheets (Cancelled)
• MIL-B-81936 - Bearings, Plain, Self-Aligning (Becu Ball, Cres Race) General Specification for (Superseded by SAE as-81936)
• MIL-B-81936/1 - Bearing, Plain, Self-Aligning, Be Cu Ball, Cres Race, (With Stacking Groove) -65 Deg. F To +350 Deg. F (Superseded by SAE as-81936/1)
• MIL-B-81936/2 - Bearing, Plain, Self-Aligning, Be Cu Ball, Cres Race, -65 Deg. F To +350 Deg. F (Superseded by SAE as-81936/2)
• MIL-B-85560 - Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification for (Superseded by SAE AS-85560)
• MIL-B-85560/1 - Bearing, Fiber Reinforced Plastic, Sleeve, Plain, Self-Lubricating, plus 250 Deg. F (Superseded by SAE AS-85560/1)
• MIL-B-85560/2 - Bearing, Fiber Reinforced Plastic, Sleeve, Flanged, Self-Lubricating, plus 250 Deg. F (Superseded by SAE AS-85560/2)
• MIL-B-8942 - Bearings, Plain, TFE Lined, Self-Aligning
• MIL-B-8943 - Bearing, Journal-Plain and Flanged, TFE Lined
• MIL-B-8948 - Bearing, Plain, Rod End, TFE Lined, Self-Aligning
• MIL-B-8976 - Bearings, Plain, Self-Aligning, All-Metal (Superseded by SAE AS-8976)
• MIL-STD-1762 - Bearings and Bushings, Plain, Preferred for Design, Listing of (No Superseding Document)
• MS-14101 - Bearings, Plain, Self-Locking, Self Lubricating, Low Speed, Narrow, Grooved Outer Ring, -65 Degrees to +325 Degrees F
• MS-14102 - Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Wide, Chamfered Outer Ring, -65 Deg. F To 325 Deg. F (Superseded by SAE as-14102)
• MS-14103 - Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Wide, Grooved Outer Ring, -65 Deg. To 325 Deg. F (Superseded by SAE as-14103)
• MS-14104 - Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Narrow, Chamfered Outer Ring, -65 Deg. F To 325 Deg. F (Superseded by SAE as-14104)
• MS-14237 - Bushing, Sleeve Plain, Press Fit, Ream Type (Superseded by SAE as-14237)
• MS-14238 - Bushing, Sleeve Flanged, Press Fit, Ream Type (Superseded by SAE as-14238)
• MS-17795 - Bearing, Sleeve, Plain Type, Sintered Bronze, Oil Impregnated
• MS-17796 - Bearing, Sleeve, Flanged, Sintered Bronze, Oil Impregnated
• MS-17811 - Washer, Thrust, Steel
• MS-21154 - Bearing, Plain, Self-Aligning, Grooved Outer Ring (Superseded by SAE as-21154)
• MS-21155 - Bearing, Plain, Self Aligning (Superseded by SAE as-21155)
• MS-21230 - Bearing, Plain, Self - Aligning, Grooved Outer Ring Tfe Lined, Wide (Superseded by SAE as-21230)
• MS-21231 - Bearing, Plain, Self-Aligning, Tfe Lined, Wide (Superseded by SAE as-21231)
• MS-21232 - Bearing, Plain, Self-Aligning, Groove Outer Ring, Tfe Lined, Narrow (Superseded by SAE as-21232)
• MS-21233 - Bearing, Plain, Self-Aligning, Tfe Lined, Narrow (Superseded by SAE as-21233)
• MS-21240 - Bearing, Sleeve, Plain, TFE-Lined
• MS-21241 - Bearing, Sleeve, Flanged, TFE-Lined
• MS-21242 - Bearing, Plain, Rod End, Self-Aligning, Tfe Lined, Externally Threaded
• MS-21243 - Bearing, Plain, Rod End, Self Aligning, Tfe Lined, Internally Threaded (Superseded by SAE as-81935/2)
• MS-21782 - Bearing, Sleeve, Plain, Sintered Iron Base, Oil Impregnated (No Superseding Document)
• MS-21783 - Bearing, Washer, Thrust, Sintered Bronze, Oil Impregnated
• MS-27050 - Notes, Bearing - General Information
• MS-35450 - Bearing, Jewel; Bar Hole (No Superseding Document)
• MS-35451 - Bearing, Jewel, Center Bar Hole (No Superseding Document)
• MS-35452 - Bearing, Jewel, Olive Hole (No Superseding Document)
• MS-35453 - Bearing, Jewel, Olive Hole (Cone Cut) (No Superseding Document)
• MS-35454 - Bearing, Jewel, End Stone (No Superseding Document)
• MS-35688 - V - Bearing (Spring, Loaded Throw Out Type)
• MS-35689 - V-Bearing (Spring Loaded)
• MS-35771 - Bearing, Sleeve: Plain, Bronze (Superseded by FF-B-195)
• MS-35772 - Bearing, Sleeve: Flanged, Copper Alloy (Superseded by FF-B-195)
• MS-35794 - Bearing, Sleeve, Steel-Backed Bimetal, Split Type,One Piece
• NA-0247 - Bearing, Plain, Self Lubricating, Self-Aligning Low Speed, Narrow,Grooved Outer Ring, -54 Degrees C To 163 Degrees C, Metric
• NA-0248 - Bearing, Plain, Self Lubricating, Self-Aligning Low Speed, Narrow, Chamfered Outer Ring, -54 Degrees C To 163 Degrees C, Metric
• NA-0249 - Bearing, Plain, Self Lubricating, Self-Aligning Low Speed, Wide, Grooved Outer Ring, -54 Degrees C To 163 Degrees C, Metric
• NA-0250 - Bearing, Plain, Self Lubricating, Self-Aligning Low Speed, Wide, Chamfered Outer Ring, -54 Degrees C To 163 Degrees C, Metric
• NAS-1443 - Lockwasher, Bearing, Retaining
• NAS-1493 - Locknut, Bearing Retaining
• NAS-332 - Bearing Retention Sleeve, Grooved Outer Face
• NAS-537 - Bushing, Sleeve, Press Fit, Undersize Inside Diameter
• NAS-538 - Bushing, Flanged, Press Fit, Undersize Inside Diameter
• NAS-72 - Bushing, Clamp-Up, Steel, Chrome Plated
• NAS-73 - Bushing, Clamp-Up, Steel, Cadmium Plated
• NAS-74 - Bushing, Clamp-Up, Bronze
• NAS-75 - Bushing, Plain Press Fit, Steel or Cres
• NAS-76 - Bushing, Plain, Press Fit, Copper and Bronze
• NAS-77 - Bushing, Flanged, Press Fit Steel, Cres, Bronze and Copper
• QPL-5629 - Bearing, Rod End, Plain, Airframe (No Superseding Document)
• QPL-81820 - Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation (Superseded by QPL-as81820-1)
• QPL-81934 - Bearings, Sleeve, Plain and Flanged, Self-Lubricating (Superseded by QPL-as81934)
• QPL-81935 - Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating (Superseded by QPL-as81935)
• QPL-81936 - Bearings, Plain, Self-Aligning (Be-Cu Ball, Cres Race), General Specification for (Superseded by QPL-SAE-as81936)
• QPL-85560 - Bearings, Fiber Reinforced Plastic, Sleeve, Plain & Flanged, Self-Lubricating, General
• QPL-8942 - Bearings, Plain, TFE Lined, Self Aligning
• QPL-8943 - Bearing, Journal-Plain & Flanged, Tfe Lined
• QPL-8948 - Bearings, Plain, Rod End, Tfe Lined Self Aligning
• QPL-8976 - Bearings, Plain, Self- Aligning, All- Metal (Superseded by QPL-SAE-as8976)
• QPL-AS-81819 - Bearing, Plain, (Self-Aligning, Sleeve and Thrust), Self-Lubricating, High Speed Oscillation
• QPL-AS-81820 - Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation, General Specification For
• QPL-AS-81934 - Bearings, Sleeve, Plain and Flanged, Self-Lubricating
• QPL-AS-81935 - Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating
• QPL-AS-81936 - Bearings, Plain, Self-Aligning, (BE-CU Ball, Cres Race), General Specification for
• QPL-AS-85560 - Bearings, Fiber-Reinforced Plastic, Sleeve, Plain & Flanged, Self-Lubricating, General Specification for
• QPL-AS-8976 - Bearings, Plain, Self-Aligning, All Metal
• SAE-J506 - Sleeve Type Half Bearings (STABILIZED Jun 2011)