ISO-13164-3 › Water quality - Radon-222 - Part 3: Test method using emanometry
The following bibliographic material is provided to assist you with your purchasing decision:
ISO 13164-3:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following its transfer from the aqueous phase to the air phase by degassing and its detection. It gives recommendations for rapid measurements performed within less than 1 h.
The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, range from 0,1 Bq l−1 to several hundred thousand becquerels per litre for a 100 ml test sample.
This test method is used successfully with drinking water samples. The laboratory is responsible for ensuring the validity of this test method for water samples of untested matrices.
This test method can be applied on field sites or in the laboratory.
Annexes A and B give indications on the necessary counting conditions to meet the required sensitivity for drinking water monitoring
To find similar documents by classification:
13.060.60 (Examination of physical properties of water)
17.240 (Radiation measurements Including dosimetry Radiation protection, see 13.280)
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Customers who bought this document also bought:
ISO-13164-4Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting
ISO-11665-8
Measurement of radioactivity in the environment - Air: radon-222 - Part 8: Methodologies for initial and additional investigations in buildings
ASTM-D6327
Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
Document Number
ISO 13164-3:2013
Revision Level
1ST EDITION
Status
Current
Publication Date
Sept. 1, 2013
Committee Number
ISO/TC 147/SC 3