ASTM-F1567 › Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
The following bibliographic material is provided to assist you with your purchasing decision:
This specification covers the material, operating, and testing requirements for automatic or continuously self-cleaning strainers, or both, for use in fuel oil and lubricating oil systems and in any marine environment. The strainer may be either hydraulic, electric, or pneumatic operated, and is designed to operate under positive pressure, that is, on the discharge side of the pump. The strainers should operate at specified pressures, temperatures, shipboard environments, and self-cleaning rates. They shall also undergo flow capacity test, inclined flow capacity test, strength of internals test, and self-cleaning and filtration efficiency test.
Scope
1.1 This specification covers automatic or continuously self-cleaning automatic strainers, or both, for use in fuel and lubrication oil systems. The strainer is designed to operate under positive pressure (discharge side of the pump). Strainers manufactured to this specification are suitable for use in any marine environment.
1.2 It is not the intent of this document to redefine existing filtration standards. The intent is to provide sound guidelines for purchasers and designers of lube oil and fuel oil systems. Nominal micron requirements and filter efficiencies shall be as agreed upon by the purchaser and manufacturer and stated in the purchase order document.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Keywords
automatic self-cleaning strainers; fuel oil strainers; lubrication oil strainers; simplex strainers ;; ICS Number Code 21.260 (Lubrication systems)
To find similar documents by ASTM Volume:
01.07 (Ships and Marine Technology)
01.08 (Fasteners; Rolling Element Bearings)
To find similar documents by classification:
21.260 (Lubrication systems Lubricants, see 75.100)
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Document Number
ASTM-F1567-94(2019)
Revision Level
1994 R19 EDITION
Status
Current
Modification Type
Reapproval
Publication Date
June 10, 2019
Document Type
Specification
Page Count
7 pages
Committee Number
F25.11