ASTM-B338 › Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
The following bibliographic material is provided to assist you with your purchasing decision:
Scope
1.1 This specification covers the requirements for 20 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers, as follows:
1.1.1 Grade 1—Unalloyed titanium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.3 Grade 3—Unalloyed titanium,
1.1.4 Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.5 Grade 9—Titanium alloy (3 % aluminum, 2.5 % vanadium),
1.1.6 Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.8 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.9 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.10 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.11 Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.12 Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.13 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,
1.1.14 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.15 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.16 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.17 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.18 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.19 Grade 33—Titanium alloy (0.4% nickel, 0.015% palladium, 0.025% ruthenium, 0.15% chromium), and
1.1.20 Grade 34—Titanium alloy (0.4% nickel, 0.015% palladium, 0.025% ruthenium, 0.15% chromium).
1.2 Tubing covered by this specification shall be heat treated by at least a stress relief as defined in 5.3.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
Keywords
seamless tubing; titanium; titanium alloy; tubing; welded/cold worked tubing; welded tubing; ICS Number Code 23.040.15 (Non-ferrous metal pipes)
To find similar documents by ASTM Volume:
To find similar documents by classification:
23.040.15 (Non-ferrous metal pipes Non-ferrous metal pipes and tubes for specific use, see 77.150)
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Customers who bought this document also bought:
ASTM-E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM-A240
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM-B265
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
Document Number
ASTM-B0338-17R21
Revision Level
2017 R21 EDTION
Status
Current
Modification Type
Revision
Publication Date
Dec. 1, 2021
Document Type
Specification
Page Count
9 pages
Committee Number
B10.01