Document Center List of Standards on Road Construction Including Road Maintenance Equipment And Road Construction Equipment
ICS Code 93.080.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1097 - Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures
- ASTM-C902 - Standard Specification for Pedestrian and Light Traffic Paving Brick
- ASTM-D1073 - Standard Specification for Fine Aggregate for Asphalt Paving Mixtures
- ASTM-D1074 - Standard Test Method for Compressive Strength of Asphalt Mixtures
- ASTM-D1139 - Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
- ASTM-D1190 - Standard Specification for Concrete Joint Sealer, Hot-Applied Elastic Type (Withdrawn 2002)
- ASTM-D1191 - Standard Test Method for Concrete Joint Sealers (Withdrawn 1996)
- ASTM-D1751 - Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)
- ASTM-D1752 - Standard Specification for Preformed Sponge Rubber, Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM-D20 - Standard Test Method for Distillation of Road Tars
- ASTM-D2628 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
- ASTM-D2835 - Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
- ASTM-D2940 - Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
- ASTM-D2950 - Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
- ASTM-D2995 - Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors
- ASTM-D3042 - Standard Test Method for Insoluble Residue in Carbonate Aggregates
- ASTM-D3104 - Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
- ASTM-D3282 - Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
- ASTM-D3405 - Standard Specification for Joint Sealants, Hot-Applied, for Concrete and Asphalt Pavements (Withdrawn 2002)
- ASTM-D3407 - Standard Test Methods for Joint Sealants, Hot-Poured, for Concrete and Asphalt Pavements (Withdrawn 1996)
- ASTM-D3744 - Standard Test Method for Aggregate Durability Index
- ASTM-D3910 - Standard Practices for Design, Testing, and Construction of Slurry Seal
- ASTM-D448 - Standard Classification for Sizes of Aggregate for Road and Bridge Construction
- ASTM-D4552 - Standard Practice for Classifying Hot-Mix Recycling Agents
- ASTM-D466 - Test Methods for Films Deposited From Bituminous Emulsions
- ASTM-D490 - Standard Specification for Road Tar (Withdrawn 2023)
- ASTM-D5339 - Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005)
- ASTM-D5841 - Standard Specification for Type III Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)
- ASTM-D692 - Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
- ASTM-D693 - Standard Specification for Crushed Aggregate for Macadam Pavements (Withdrawn 2008)
- ASTM-D8 - Standard Terminology Relating to Materials for Roads and Pavements
- ASTM-D979 - Standard Practice for Sampling Bituminous Paving Mixtures
- ASTM-E1443 - Terminology Relating to Building and Accessing Material and Chemical Databases (Withdrawn 2000)
- ASTM-E1890 - Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
- ASTM-E2380 - Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
- ASTM-E2583 - Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
- ASTM-F2508 - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
BSI:
- BS-1707 - Road surface dressing, bond coats, seals, preservatives and other sprays. Specification for the method of test for binder sprayers for accuracy of spread of binder (spray bar bench test)
- BS-1707-TC - Tracked Changes. Road surface dressing, bond coats, seals, preservatives and other sprays. Specification for the method of test for binder sprayers for accuracy of spread of binder (spray bar bench test)
- BS-3136-2 - Specification for cold emulsion spraying machines for roads. Metric units
- BS-594-2 - Hot Rolled Asphalt for Roads & Other Paved Areas, Specification for Transport, Laying
- BS-598-106 - Sampling and examination of bituminous mixtures for roads and other paved areas
- BS-598-109 - Sampling & Examination of Bituminous Mixtures for Roads & Other Paved Areas, Methods F
- BS-598-110 - Sampling and examination of bituminous mixtures for roads and other paved areas
- BS-EN-13019 - Machines for road surface cleaning. Safety requirements
- BS-EN-13020 - Road surface treatment machines. Safety requirements
- BS-EN-13020-TC - Tracked Changes. Road surface treatment machines. Safety requirements
- BS-EN-13036-1 - Road and airfield surface characteristics. Test methods
- BS-EN-13036-4 - Road and airfield surface characteristics. Test methods
- BS-EN-13036-5 - Road and airfield surface characteristics. Test methods
- BS-EN-13036-6 - Road and airfield surface characteristics. Test methods
- BS-EN-13036-8 - Road and airfield surface characteristics. Test methods
- BS-EN-13862-TC - Tracked Changes. Floor cutting-off machines. Safety
- BS-EN-16165 - Determination of slip resistance of pedestrian surfaces. Methods of evaluation
- BS-EN-536 - Road construction machines. Mixing plants for road construction materials. Safety requirements
- BS-ISO-15643 - Road construction and maintenance equipment. Bituminous binder sprayers and synchronous bituminous binder sprayers-chip spreaders. Terminology and commercial specifications
- BS-ISO-15688 - Road construction and maintenance equipment. Soil stabilizers. Terminology and commercial specifications
- BS-ISO-15878 - Road construction and maintenance equipment. Paver-finishers. Commercial specifications
- BS-ISO-22242 - Road construction and road maintenance machinery and equipment. Basic types. Identification and description
- BS-ISO-8608 - Mechanical vibration. Road surface profiles. Reporting of measured data
- CWA-15846 - Measuring Method for Dynamic Compactness & Bearing Capacity With Sp-Lfwd (Small-Plate
- DD-CEN-15209 - Tactile paving surface indicators produced from concrete, clay and stone
- PD-CEN-15209-TC - Tracked Changes. Tactile paving surface indicators produced from concrete, clay and stone
ISO:
- ISO-15642 - Road construction and maintenance equipment - Asphalt mixing plants - Terminology and commercial specifications
- ISO-15643 - Road construction and maintenance equipment - Bituminous binder sprayers and synchronous bituminous binder sprayers-chip spreaders - Terminology and commercial specifications
- ISO-15643-AM1 - Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications - Amendment 1
- ISO-15644 - Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications
- ISO-15645 - Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications
- ISO-15645-AM1 - - Amendment 1
- ISO-15688 - Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications
- ISO-15689 - Road construction and maintenance equipment -- Powder binder spreaders -- Terminology and commercial specifications
- ISO-15878 - Road construction and maintenance equipment - Paver-finishers - Commercial specifications
- ISO-16039 - Road construction and maintenance equipment - Slipform pavers - Definitions and commercial specifications
- ISO-16039-AM1 - - Amendment 1
- ISO-22242 - Road construction and road maintenance machinery and equipment - Basic types - Identification and description
- ISO-22242-AM1 - - Amendment 1
- ISO-24147 - Road operation machinery and associated equipment - Sweepers - Commercial specifications
- ISO-8608 - Mechanical vibration - Road surface profiles - Reporting of measured data
Other SDOs:
- DIN-EN-500-1 - Part 1: Common Requirements, Mobile Road Construction Machinery - Safety
- DIN-EN-500-2 - Part 2: Specific Requirements for Road-Milling Machines, Mobile Road Construction Mach
- DIN-EN-500-3 - Part 3: Specific Requirements for Soil-Stabilizing Machines & Recycling Machines, Mob
- EN-13019 - Machines for Road Surface Cleaning, Safety Requirements
- EN-13020 - Road surface treatment machines - Safety requirements
- EN-13036-1 - Part 1: Measurement of Pavement Surface Macrotexture Depth Using a Volumetric Patch Te
- EN-13036-4 - Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
- EN-13036-6 - Road & Airfield Surface Characteristics, Test Methods, Measurement of Transverse & Lon
- EN-13036-8 - Road & Airfield Surface Characteristics, Test Methods, Determination of Transverse Une
- EN-500-4 - Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
- EN-536 - Road construction machines - Mixing plants for road construction materials - Safety requirements
- SIS-CEN/TS-15209 - Tactile paving surface indicators produced from concrete, clay and stone
- SIS-CEN/TS-16165 - Determination of slip resistance of pedestrian surfaces - Methods of evaluation
- SS-EN-13020 - Road surface treatment machines - Safety requirements
- SS-EN-13036-1 - Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
- SS-EN-13036-4 - Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
- SS-EN-13036-5 - Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
- SS-EN-13036-6 - Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
- SS-EN-13036-8 - Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness indices
- SS-EN-13862 - Floor cutting-off machines - Safety
- SS-EN-15663 - Railway applications - Vehicle reference masses
- SS-EN-16165 - Determination of slip resistance of pedestrian surfaces - Methods of evaluation
- SS-EN-500-1 - Mobile road construction machinery - Safety - Part 1: Common requirements
- SS-EN-500-2 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
- SS-EN-500-3 - Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
- SS-EN-500-4 - Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
- SS-EN-500-6 - Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers
- SS-EN-536 - Road construction machines - Mixing plants for road construction materials - Safety requirements
- SS-ISO-15642 - Road construction and maintenance equipment Asphalt mixing plants Terminology and commercial specifications (ISO 15642:2003, IDT)
- SS-ISO-15643 - Road construction and maintenance equipment - Bituminous binder sprayers and synchronous bituminous binder sprayers-chip spreaders - Terminology and commercial specifications (ISO 15643:2020, IDT)
- SS-ISO-15645 - Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications (ISO 15645:2018, IDT)
- SS-ISO-15688 - Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications (ISO 15688:2012, IDT)
- SS-ISO-15878 - Road construction and maintenance equipment Paver-finishers Commercial specifications (ISO 15878:2021, IDT)
- SS-ISO-16039 - Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications (ISO 16039:2004, IDT)
- SS-ISO-22242 - Road construction and road maintenance machinery and equipment - Basic types - Identification and description (ISO 22242:2005, IDT)