Document Center List of Standards on Gas Supply Systems Including Gas Meters In Buildings
ICS Code 91.140.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-F2897 - Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
- ASTM-F2968 - Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
BSI:
- BS-1552 - Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
- BS-1553-2 - Specification for graphical symbols for general engineering
- BS-5292 - Specification for jointing materials and compounds for installations using water, low-pressure steam or 1st, 2nd and 3rd family gases
- BS-5482-1 - Code of practice for domestic butane- and propane-gas-burning installations
- BS-5834-1 - Surface boxes, guards and underground chambers for the purposes of utilities
- BS-5834-1-TC - Tracked Changes. Surface boxes, guards and underground chambers for the purposes of utilities
- BS-5834-2 - Surface boxes, guards and underground chambers for the purposes of utilities
- BS-5834-4 - Surface boxes, guards and underground chambers for the purposes of utilities
- BS-6400 - Specification for installation of domestic sized gas meters (2nd and 3rd family gases)
- BS-6400-1 - Specification for installation, exchange, relocation, maintenance and removal of gas meters with a maximum capacity not exceeding 6 m3/h
- BS-6400-2 - Specification for installation, exchange, relocation, maintenance and removal of gas meters with a maximum capacity not exceeding 6 m3/h
- BS-6400-2-TC - Tracked Changes. Specification for installation, exchange, relocation, maintenance and removal of gas meters with a maximum capacity not exceeding 6 m3/h
- BS-6400-3 - Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m3/h
- BS-669-1 - Flexible hoses, end fittings and sockets for gas burning appliances
- BS-669-2 - Flexible hoses, end fittings and sockets for gas burning appliances
- BS-6891 - Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R114) on premises
- BS-759-2 - Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers. Specification for safety valves
- BS-7838 - Specification for Corrugated Stainless Steel Semi-Rigid Pipe and Associated Fittings for Low-Pressure Gas Pipework of Up To DN 50
- BS-8487 - The design and construction of gas boosters used in association with combustion equipment. Specification
- BS-8499 - Specification for domestic gas meter boxes and meter bracket
- BS-8499-TC - Tracked Changes. Specification for domestic gas meter boxes and meter bracket
- BS-EN-12261-TC - Tracked Changes. Gas meters.Turbine gas meters
- BS-EN-12279 - Gas supply systems. Gas pressure regulating installations on service lines. Functional requirements
- BS-EN-12327 - Gas infrastructure. Pressure testing, commissioning and decommissioning procedures. Functional requirements
- BS-EN-12405 - Gas Meters - Gas-Volume Electronic Conversion Devices
- BS-EN-12405-2 - Gas meters. Conversion devices
- BS-EN-12405-3 - Gas meters. Conversion devices
- BS-EN-12480 - Gas meters. Rotary displacement gas meters
- BS-EN-13090 - Means for resealing threaded joints of gas pipework in buildings
- BS-EN-1359 - Gas meters. Diaphragm gas meters
- BS-EN-1359-TC - Tracked Changes. Gas meters. Diaphragm gas meters
- BS-EN-14236 - Ultrasonic domestic gas meters
- BS-EN-14236-TC - Tracked Changes. Ultrasonic domestic gas meters
- BS-EN-14459 - Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment
- BS-EN-14459-TC - Tracked Changes. Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment
- BS-EN-15001-1 - Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations
- BS-EN-15001-1-TC - Tracked Changes. Gas Infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations
- BS-EN-15001-2 - Gas supply systems. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations
- BS-EN-15001-2-TC - Tracked Changes. Gas supply systems. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations
- BS-EN-15069 - Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
- BS-EN-15399 - Gas infrastructure. Safety Management System for Gas Networks with maximum operating pressure up to and including 16 bar
- BS-EN-1555-1 - Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-EN-1555-2 - Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-EN-1555-3 - Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-EN-1555-4 - Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-EN-1555-4-TC - Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-EN-1555-5 - Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-EN-16129 - Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
- BS-EN-16314 - Gas meters. Additional functionalities
- BS-EN-16830 - Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Temperature Control function
- BS-EN-16830-TC - Tracked Changes. Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Temperature Control function
- BS-EN-1749 - Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
- BS-EN-1749-TC - Tracked Changes. Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
- BS-EN-1775 - Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
- BS-EN-437 - Test gases. Test pressures. Appliance categories
- BS-EN-437-TC - Tracked Changes. Test gases. Test pressures. Appliance categories
- BS-EN-751-3-TC - Tracked Changes. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water
- BS-EN-777-2 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use
- BS-EN-777-3 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use
- BS-EN-777-4 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use
- BS-ISO-17484-1 - Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa)
- BS-ISO-23555-1 - Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa
- BS-ISO-23555-2 - Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa
- DD-CEN-1555-7 - Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- DD-ENV-14236 - Ultrasonic Domestic Gas Meters
- PAS-4442 - Material requirements for pipework and fittings used in hydrogen gas installation. Specification
- PD-6579 - European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (types)
- PD-CEN-13737-1 - Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure
- PD-CEN-13737-2 - Gas infrastructure. Implementation Guide for Functional Standards prepared by CEN/TC 234
- PD-CEN-1555-7 - Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- PD-CEN-1555-7-TC - Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- PD-CEN-16388 - Gas-Specific Environmental Document. Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle
- PD-CEN-16395-TC - Tracked Changes. Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
- PD-CEN-16787 - Industrial Gas Installation. Guideline
- PD-CEN-16940 - Domestic gas installations. Recommendations for safety
- PD-CEN-1749 - European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
- PD-CR-13737 - Implementation guide for functional standards prepared by CEN/TC 234 'Gas supply'
- PD-CR-1749 - European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (Types)
- TH-42080 - Gas Supply Characteristics & Appliance Approval, an International Survey
ISO:
- ISO-17484-1 - Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
- ISO-17484-2 - Plastics piping systems - Multilayer pipe systems for indoor gas installations - Part 2: Code of pratice
- ISO-19480 - Polyethylene pipes and fittings for the supply of gaseous fuels or water - Training and assessment of fusion operators
- ISO-23555-1 - Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa - Part 1: General requirements
- ISO-23555-2 - Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa - Part 2: Gas pressure regulator
- ISO-23555-3 - Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa - Part 3: Safety shut-off devices
- ISO-2531 - Ductile iron pipes, fittings, accessories and their joints for water applications
- ISO-6447 - Rubber seals - Joint rings used for gas supply pipes and fittings - Specification for material
Other SDOs:
- BS-EN-12480-TC - Tracked Changes. Gas meters. Rotary displacement gas meters
- BS-ISO-23555-3 - Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa
- DIN-EN-12279 - Gas Supply Systems - Gas Pressure Regulating Installations on Service Lines - Function
- DIN-EN-12405 - Gas Meters, Gas-Volume Electronic Conversion Devices
- DIN-EN-12405-1 - Part 1: Volume Conversion, Gas Meters - Conversion Devices
- DIN-EN-12480 - Gas meters - Rotary displacement gas meters; German version EN 12480:2015
- DIN-EN-1555-2 - Part 2: Pipes, Plastics Piping Systems for the Supply of Gaseous Fuels - Polyethylene
- DIN-EN-1555-3 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings; German version EN 1555-3:2010+A1:2012
- DIN-EN-1555-4 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
- DIN-EN-1555-5 - Part 5: Fitness for Purpose of the System, Plastics Piping Systems for the Supply of G
- EN-12279 - Gas Supply Systems - Gas Pressure Regulating Installations on Service Lines - Function
- EN-12327 - Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements
- EN-12405 - Gas Meters, Gas-Volume Electronic Conversion Devices
- EN-12405-1 - Part 1: Volume Conversion, Gas Meters - Conversion Devices
- EN-12405-2 - Gas meters - Conversion devices - Part 2: Energy conversion
- EN-12405-3 - Gas meters - Conversion devices - Part 3: Flow computer
- EN-12480 - Gas meters - Rotary displacement gas meters
- EN-1359 - Gas meters - Diaphragm gas meters
- EN-14236 - Ultrasonic domestic gas meters
- EN-14459 - Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
- EN-15001-1 - Part 1: Detailed Functional Requirements for Design, Materials, Construction, Inspecti
- EN-15001-2 - Part 2: Detailed Functional Requirements for Commissioning, Operation & Maintenance,
- EN-15069 - Safety Gas Connection Valves for Metal Hose Assemblies Used for the Connection of Dom
- EN-15399 - Gas infrastructure - Safety Management System for Gas Networks with maximum operting pressure up to and including 16 bar
- EN-1555-1 - Part 1: General, Plastics Piping Systems for the Supply of Gaseous Fuels - Polyethylen
- EN-1555-2 - Part 2: Pipes, Plastics Piping Systems for the Supply of Gaseous Fuels - Polyethylene
- EN-1555-4 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
- EN-1555-5 - Part 5: Fitness for Purpose of the System, Plastics Piping Systems for the Supply of G
- EN-16314 - Gas meters - Additional functionalities
- EN-16830 - Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
- EN-1775 - Gas Supply, Gas Pipework for Buildings, Maximum Operating Pressure Less Than or Equal
- EN-437 - Test Gases - Test- Pressures - Appliance Categories
- EN-777-2 - Part 2: System E - Safety, Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems
- EN-777-4 - Part 4: System H - Safety, Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems
- SIS-CEN/TR-13737-1 - Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General
- SIS-CEN/TR-13737-2 - Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards
- SIS-CEN/TR-16061 - Gas meters - Smart Gas Meters
- SIS-CEN/TR-16388 - Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle
- SIS-CEN/TR-16395 - Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
- SIS-CEN/TR-16787 - Industrial Gas Installation - Guideline
- SIS-CEN/TR-16940 - Domestic gas installations - Recommendations for safety
- SIS-CEN/TR-1749 - European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
- SIS-CEN/TS-15399 - Gas supply systems - Guidelines for management systems for gas distribution network
- SIS-CEN/TS-1555-7 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
- SIS-CR-13737 - Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply"
- SS-EN-12261 - Gas meters - Turbine gas meters
- SS-EN-12261-AM1 - Gas meters - Turbine gas meters
- SS-EN-12279 - Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements
- SS-EN-12279-AM1 - Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements
- SS-EN-12327 - Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements
- SS-EN-12405 - Gas meters - Gas-volume electronic conversion devices
- SS-EN-12405-1 - Gas meters - Conversion devices - Part 1: Volume conversion
- SS-EN-12405-1-AM1 - Gas meters - Conversion devices - Part 1: Volume conversion
- SS-EN-12405-2 - Gas meters - Conversion devices - Part 2: Energy conversion
- SS-EN-12405-3 - Gas meters - Conversion devices - Part 3: Flow computer
- SS-EN-12480 - Gas meters - Rotary displacement gas meters
- SS-EN-12480-AM1 - Gas meters - Rotary displacement gas meters
- SS-EN-13157 - Cranes - Safety - Hand powered cranes
- SS-EN-1359 - Gas meters - Diaphragm gas meters
- SS-EN-1359-AM1 - Gas meters - Diaphragm gas meters
- SS-EN-14236 - Ultrasonic domestic gas meters
- SS-EN-14459 - Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
- SS-EN-15001-1 - Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
- SS-EN-15001-2 - Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
- SS-EN-15069 - Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
- SS-EN-15399 - Gas infrastructure - Safety Management System for Gas Networks with maximum operting pressure up to and including 16 bar
- SS-EN-15543 - Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
- SS-EN-1555-1 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
- SS-EN-1555-2 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
- SS-EN-1555-3 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
- SS-EN-1555-3-AM1 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
- SS-EN-1555-4 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
- SS-EN-1555-5 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
- SS-EN-16314 - Gas meters - Additional functionalities
- SS-EN-1643 - Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Valve proving systems for automatic shut-off valves
- SS-EN-16830 - Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
- SS-EN-17175 - Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency
- SS-EN-17278 - Natural gas vehicles - Vehicle fuelling appliances
- SS-EN-1749 - Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
- SS-EN-17526 - Gas meter - Thermal-mass flow-meter based gas meter
- SS-EN-17649 - Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
- SS-EN-1775 - Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations
- SS-EN-416 - Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use - Safety and energy efficiency
- SS-EN-416-1 - Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
- SS-EN-437 - Test gases - Test pressures - Appliance categories
- SS-EN-777-1 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
- SS-EN-777-2 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
- SS-EN-777-3 - Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
- SS-EN-777-4 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
- SS-ENV-14459 - Method of risk analysis and recommendations for the use of electronics in systems for the control of gas burners and gas burning appliances
- SS-ISO-12991 - Liquefied natural gas (LNG) - Tanks for on-board storage as a fuel for automotive vehicles (ISO 12991:2012, IDT)
- SS-ISO-17484-1 - Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems (ISO 17484-1:2014, IDT)
- SS-ISO-17484-2 - Plastics piping systems - Multilayer pipe systems for indoor gas installations - Part 2: Code of practice (ISO 17484-2:2009, IDT)
- UNE-EN-14459 - Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment