Document Center List of Standards on Waterproofing Sealing Materials, See 91.100.50
ICS Code 91.120.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1471 - Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
- ASTM-C1498 - Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
- ASTM-C1501 - Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
- ASTM-D5683 - Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
- ASTM-D5849 - Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
- ASTM-D6294 - Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
- ASTM-D6532 - Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
- ASTM-D6950 - Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
- ASTM-D7832 - Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)
- ASTM-E1643 - Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
- ASTM-E1677 - Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls
- ASTM-E2266 - Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
- ASTM-E2321 - Standard Practice for Use of Test Methods
for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS) - ASTM-E2359 - Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
- ASTM-E241 - Standard Guide for Limiting Water-Induced Damage to Buildings
- ASTM-E2485 - Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
- ASTM-F1769 - Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
- ASTM-F1770 - Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor (Withdrawn 2004)
BSI:
- BS-2832 - Specification for hot applied damp resisting coatings for solums
- BS-4315-1 - Methods of test for resistance to air and water penetration
- BS-4315-2 - Methods of test for resistance to air and water penetration
- BS-6398 - Specification for bitumen damp-proof courses for masonry
- BS-6515 - Specification for polyethylene damp-proof courses for masonry
- BS-6576 - Code of practice for diagnosis of rising damp in walls of buildings and installation of chemical damp-proof courses
- BS-743 - Specification for materials for damp-proof courses
- BS-8102 - Protection of below ground structures against water ingress. Code of practice
- BS-8215 - Code of practice for design and installation of damp-proof courses in masonry construction
- BS-8533 - Assessing and managing flood risk in development. Code of practice
- BS-85500 - Flood resistant and resilient construction. Guide to improving the flood performance of buildings
- BS-8582 - Code of practice for surface water management for development sites
- BS-EN-12865 - Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure
- BS-EN-1296 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature
- BS-EN-17873 - Flexible sheets for waterproofing. Underlays for discontinuous roof coverings and walls. Instructions for mounting and fixing for reaction to fire testing
- CP-102 - Code of practice for protection of buildings against water from the ground
- DD-86-1 - Damp-proof courses. Methods of test for flexural bond strength and short term shear strength
- DD-86-2 - Damp-proof courses. Method of test for creep deformation
- DD-86-3 - Damp-proof courses. Guide to characteristic strengths of damp-proof course material used in masonry
- PD-CEN-15601 - Hygrothermal performance of buildings. Resistance to wind-driven rain of roof coverings with discontinuously laid small elements. Test methods
Other SDOs:
- DIN-EN-14114 - Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems; German version EN 14114:2002
- DIN-EN-ISO-15927-4 - Part 4: Hourly Data for Assessing the Annual Energy Use for Heating & Cooling, Hygrot
- DIN-EN-ISO-15927-5 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004 + Amd 1:2011)
- EN-14114 - Hygrothermal Performance of Building Equipment & Industrialinstallations, Calculation
- EN-ISO-15927-4 - Part 4: Hourly Data for Assessing the Annual Energy Use for Heating & Cooling, Hygrot
- EN-ISO-15927-5 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004)
- JIS-A-6111 - House wrapping sheets
- SIS-CEN/TR-15601 - Hygrothermal performance of buildings - Resistance to wind driven rain of roof coverings with discontinuously laid small elements - Test methods
- SS-EN-12865 - Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure
- SS-EN-15026 - Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation