Document Center is acquired by Nimonik

Document Center List of Standards on Concrete And Concrete Products Including Admixtures

ICS Code 91.100.30

Return to ICS Index.

Up to Level 2:

• 91.100 (Construction materials Iron and steel products, see 77.140 Products of non-ferrous metals, see 77.150 Sawn timber, see 79.040 Wood-based panels, see 79.060 Glass, see 81.040.20 Plastics products, see 83.140)

The following documents are a part of this series:

ASTM:

• ASTM-C1017 - Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022)
• ASTM-C1018 - Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
• ASTM-C1037 - Standard Practice for Inspection of Underground Precast Concrete Utility Structures
• ASTM-C1040 - Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
• ASTM-C1042 - Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear (Withdrawn 2008)
• ASTM-C1064 - Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
• ASTM-C1074 - Standard Practice for Estimating Concrete Strength by the Maturity Method
• ASTM-C1077 - Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
• ASTM-C1078 - Test Methods for Determining the Cement Content of Freshly Mixed Concrete (Withdrawn 1998)
• ASTM-C1079 - Test Methods for Determining the Water Content of Freshly Mixed Concrete (Withdrawn 1998)
• ASTM-C1084 - Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
• ASTM-C1089 - Standard Specification for Spun Cast Prestressed Concrete Poles
• ASTM-C1105 - Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
• ASTM-C1116 - Standard Specification for Fiber-Reinforced Concrete
• ASTM-C1117 - Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance (Withdrawn 2003)
• ASTM-C1137 - Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011)
• ASTM-C1138 - Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
• ASTM-C1140 - Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
• ASTM-C1141 - Standard Specification for Admixtures for Shotcrete (Withdrawn 2024)
• ASTM-C1150 - Standard Test Method for the Break-Off Number of Concrete (Withdrawn 2002)
• ASTM-C1151 - Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete (Withdrawn 2000)
• ASTM-C1152 - Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
• ASTM-C1159 - Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete (Withdrawn 2021)
• ASTM-C116 - Test Method for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure (Withdrawn 1999)
• ASTM-C1170 - Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
• ASTM-C1176 - Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
• ASTM-C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
• ASTM-C1209 - Standard Terminology of Concrete Masonry Units and Related Units (Withdrawn 2009)
• ASTM-C1213 - Standard Terminology Relating to Precast Concrete Products (Withdrawn 2001)
• ASTM-C1228 - Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
• ASTM-C1229 - Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
• ASTM-C123 - Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023)
• ASTM-C1230 - Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
• ASTM-C1231 - Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
• ASTM-C1245 - Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test) (Withdrawn 2019)
• ASTM-C125 - Standard Terminology Relating to Concrete and Concrete Aggregates
• ASTM-C127 - Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024)
• ASTM-C128 - Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
• ASTM-C129 - Standard Specification for Nonloadbearing Concrete Masonry Units
• ASTM-C1293 - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
• ASTM-C131 - Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• ASTM-C1312 - Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory (Withdrawn 2021)
• ASTM-C1319 - Standard Specification for Concrete Grid Paving Units
• ASTM-C136 - Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
• ASTM-C137 - Specification for Solid Load-Bearing Concrete Masonry Units (Withdrawn 1990)
• ASTM-C1370 - Standard Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes (Withdrawn 2021)
• ASTM-C138 - Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
• ASTM-C1383 - Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
• ASTM-C1385 - Standard Practice for Sampling Materials for Shotcrete
• ASTM-C1386 - Standard Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units (Withdrawn 2013)
• ASTM-C139 - Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
• ASTM-C1399 - Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete (Withdrawn 2024)
• ASTM-C140 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM-C1404 - Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension (Withdrawn 2010)
• ASTM-C142 - Standard Test Method for Clay Lumps and Friable Particles in Aggregates
• ASTM-C143 - Standard Test Method for Slump of Hydraulic-Cement Concrete
• ASTM-C1435 - Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
• ASTM-C1436 - Standard Specification for Materials for Shotcrete (Withdrawn 2022)
• ASTM-C145 - Specification for Solid Load-Bearing Concrete Masonry Units (Withdrawn 1990)
• ASTM-C1451 - Standard Practice for Determining Variability of Concrete-Making Materials From a Single Source
• ASTM-C1452 - Standard Specification for Reinforced Autoclaved Aerated Concrete Elements (Withdrawn 2013)
• ASTM-C1480 - Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application (Withdrawn 2021)
• ASTM-C1524 - Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
• ASTM-C1543 - Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding (Withdrawn 2019)
• ASTM-C156 - Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
• ASTM-C1560 - Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
• ASTM-C1567 - Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
• ASTM-C1577 - Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
• ASTM-C1581 - Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
• ASTM-C1585 - Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
• ASTM-C1591 - Standard Test Method for Determination of the Modulus of Elasticity of AAC (Withdrawn 2013)
• ASTM-C1604 - Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
• ASTM-C1610 - Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
• ASTM-C1611 - Standard Test Method for Slump Flow of Self-Consolidating Concrete
• ASTM-C1621 - Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
• ASTM-C1623 - Standard Specification for Manufactured Concrete Masonry Lintels
• ASTM-C1634 - Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
• ASTM-C1646 - Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
• ASTM-C1677 - Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
• ASTM-C1686 - Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
• ASTM-C1688 - Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)
• ASTM-C1691 - Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
• ASTM-C1692 - Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
• ASTM-C1693 - Standard Specification for Autoclaved Aerated Concrete (AAC)
• ASTM-C1694 - Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
• ASTM-C1701 - Standard Test Method for Infiltration Rate of In Place Pervious Concrete
• ASTM-C171 - Standard Specification for Sheet Materials for Curing Concrete
• ASTM-C1712 - Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
• ASTM-C1719 - Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
• ASTM-C172 - Standard Practice for Sampling Freshly Mixed Concrete
• ASTM-C1723 - Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
• ASTM-C173 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
• ASTM-C1731 - Standard Specification for Concrete Floor Tile
• ASTM-C1732 - Standard Practice for Installation of Concrete Floor Tiles
• ASTM-C174 - Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
• ASTM-C1740 - Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
• ASTM-C1747 - Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion (Withdrawn 2022)
• ASTM-C1754 - Standard Test Method for Density and Void Content of Hardened Pervious Concrete (Withdrawn 2021)
• ASTM-C1757 - Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022)
• ASTM-C1758 - Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
• ASTM-C1760 - Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete (Withdrawn 2021)
• ASTM-C1761 - Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
• ASTM-C1768 - Standard Practice for Accelerated Curing of Concrete Cylinders
• ASTM-C1778 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
• ASTM-C1792 - Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023)
• ASTM-C1797 - Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
• ASTM-C1797M - Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
• ASTM-C1798 - Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete
• ASTM-C1800 - Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
• ASTM-C1804 - Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
• ASTM-C1812 - Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
• ASTM-C1821 - Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
• ASTM-C1824 - Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
• ASTM-C1837 - Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
• ASTM-C1849 - Standard Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete
• ASTM-C1856 - Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
• ASTM-C1884 - Standard Specification for Manufactured Concrete Ballast Units
• ASTM-C192 - Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• ASTM-C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
• ASTM-C231 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
• ASTM-C232 - Standard Test Method for Bleeding of Concrete
• ASTM-C233 - Standard Test Method for Air-Entraining Admixtures for Concrete
• ASTM-C234 - Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel (Withdrawn 2000)
• ASTM-C260 - Standard Specification for Air-Entraining Admixtures for Concrete
• ASTM-C289 - Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method) (Withdrawn 2016)
• ASTM-C293 - Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
• ASTM-C295 - Standard Guide for Petrographic Examination of Aggregates for Concrete
• ASTM-C309 - Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
• ASTM-C31 - Standard Practice for Making and Curing Concrete Test Specimens in the Field
• ASTM-C311 - Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
• ASTM-C33 - Standard Specification for Concrete Aggregates
• ASTM-C330 - Standard Specification for Lightweight Aggregates for Structural Concrete
• ASTM-C331 - Standard Specification for Lightweight Aggregates for Concrete Masonry Units
• ASTM-C332 - Standard Specification for Lightweight Aggregates for Insulating Concrete
• ASTM-C387 - Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
• ASTM-C39 - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
• ASTM-C40 - Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
• ASTM-C403 - Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
• ASTM-C418 - Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
• ASTM-C42 - Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• ASTM-C426 - Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
• ASTM-C441 - Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
• ASTM-C457 - Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
• ASTM-C469 - Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
• ASTM-C470 - Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
• ASTM-C490 - Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
• ASTM-C494 - Standard Specification for Chemical Admixtures for Concrete
• ASTM-C495 - Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
• ASTM-C496 - Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
• ASTM-C511 - Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
• ASTM-C512 - Standard Test Method for Creep of Concrete in Compression
• ASTM-C513 - Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
• ASTM-C535 - Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• ASTM-C55 - Standard Specification for Concrete Building Brick
• ASTM-C567 - Standard Test Method for Determining Density of Structural Lightweight Concrete
• ASTM-C586 - Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
• ASTM-C597 - Standard Test Method for Pulse Velocity Through Concrete
• ASTM-C617 - Standard Practice for Capping Cylindrical Concrete Specimens
• ASTM-C618 - Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
• ASTM-C637 - Standard Specification for Aggregates for Radiation-Shielding Concrete
• ASTM-C638 - Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
• ASTM-C641 - Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
• ASTM-C642 - Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
• ASTM-C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
• ASTM-C671 - Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing (Withdrawn 2003)
• ASTM-C672 - Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)
• ASTM-C682 - Standard Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures (Withdrawn 2003)
• ASTM-C684 - Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (Withdrawn 2012)
• ASTM-C685 - Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
• ASTM-C70 - Standard Test Method for Surface Moisture in Fine Aggregate
• ASTM-C702 - Standard Practice for Reducing Samples of Aggregate to Testing Size
• ASTM-C744 - Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
• ASTM-C779 - Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
• ASTM-C78 - Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
• ASTM-C796 - Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
• ASTM-C801 - Standard Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads (Withdrawn 2004)
• ASTM-C803 - Standard Test Method for Penetration Resistance of Hardened Concrete
• ASTM-C805 - Standard Test Method for Rebound Number of Hardened Concrete
• ASTM-C811 - Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings (Withdrawn 2012)
• ASTM-C823 - Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
• ASTM-C825 - Standard Specification for Precast Concrete Barriers
• ASTM-C856 - Standard Practice for Petrographic Examination of Hardened Concrete
• ASTM-C857 - Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
• ASTM-C858 - Standard Specification for Underground Precast Concrete Utility Structures
• ASTM-C869 - Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
• ASTM-C873 - Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
• ASTM-C878 - Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
• ASTM-C88 - Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
• ASTM-C881 - Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
• ASTM-C882 - Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
• ASTM-C883 - Standard Test Method for Effective Shrinkage of Epoxy-Resin Systems Used With Concrete (Withdrawn 1996)
• ASTM-C884 - Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
• ASTM-C890 - Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
• ASTM-C891 - Standard Practice for Installation of Underground Precast Concrete Utility Structures
• ASTM-C90 - Standard Specification for Loadbearing Concrete Masonry Units
• ASTM-C900 - Standard Test Method for Pullout Strength of Hardened Concrete
• ASTM-C915 - Standard Specification for Precast Reinforced Concrete Crib Wall Members
• ASTM-C918 - Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
• ASTM-C928 - Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
• ASTM-C935 - Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
• ASTM-C937 - Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
• ASTM-C938 - Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
• ASTM-C939 - Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
• ASTM-C94 - Standard Specification for Ready-Mixed Concrete
• ASTM-C940 - Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM-C941 - Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
• ASTM-C942 - Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM-C943 - Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
• ASTM-C944 - Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
• ASTM-C947 - Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
• ASTM-C948 - Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
• ASTM-C953 - Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM-C956 - Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
• ASTM-C979 - Standard Specification for Pigments for Integrally Colored Concrete
• ASTM-C989 - Standard Specification for Slag Cement for Use in Concrete and Mortars
• ASTM-C990 - Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
• ASTM-C990M - Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
• ASTM-C995 - Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone (Withdrawn 2008)
• ASTM-D1734 - Standard Practice for Making Cementitious Panels for Testing Coatings
• ASTM-D1985 - Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
• ASTM-D3398 - Standard Test Method for Index of Aggregate Particle Shape and Texture (Withdrawn 2014)
• ASTM-D422 - Standard Test Method for Particle-Size Analysis of Soils (Withdrawn 2016)
• ASTM-D4787 - Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
• ASTM-D4791 - Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
• ASTM-D4792 - Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
• ASTM-D5821 - Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
• ASTM-D6297 - Standard Specification for Asphaltic Plug Joints for Bridges
• ASTM-D6532 - Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
• ASTM-D6884 - Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems (Withdrawn 2024)
• ASTM-D6916 - Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
• ASTM-D7172 - Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared (Withdrawn 2022)
• ASTM-D7174 - Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
• ASTM-D7276 - Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
• ASTM-D7277 - Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
• ASTM-D7428 - Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
• ASTM-D75 - Standard Practice for Sampling Aggregates
• ASTM-D7508 - Standard Specification for Polyolefin Chopped Strands for Use in Concrete
• ASTM-D994 - Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
• ASTM-E154 - Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
• ASTM-E1907 - Standard Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings (Withdrawn 2008)
• ASTM-E2634 - Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
• ASTM-F1869 - Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
• ASTM-F2420 - Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood (Withdrawn 2014)
• ASTM-F2471 - Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
• ASTM-PS118 - Provisional Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) (Withdrawn 1999)

BSI:

• BIP-2001 - Standards for fresh concrete
• BS-1197-2 - Specification for Concrete Flooring Tiles and Fittings, Metric Units
• BS-1881-1 - Methods of testing concrete. Method of mixing and sampling fresh concrete in the laboratory
• BS-1881-101 - Testing concrete. Method of sampling fresh concrete on site
• BS-1881-102 - Testing concrete. Method for determination of slump
• BS-1881-103 - Method for Determination of Compacting Factor
• BS-1881-104 - Testing concrete. Method for determination of Vebe time
• BS-1881-105 - Testing concrete. Method for determination of flow
• BS-1881-106 - Testing Concrete, Methods for Determination of Air Content of Fresh Concrete
• BS-1881-107 - Method for Determination of Density of Compacted Fresh Concrete
• BS-1881-108 - Testing concrete. Method for making test cubes from fresh concrete
• BS-1881-109 - Testing concrete. Method for making test beams from fresh concrete
• BS-1881-110 - Testing concrete. Method for making test cylinders from fresh concrete
• BS-1881-111 - Method of Normal Curing of Test Specimens (20Degree C Method)
• BS-1881-112 - Testing concrete. Methods of accelerated curing of test cubes
• BS-1881-113 - Testing concrete
• BS-1881-114 - Methods for Determination of Density of Hardened Concrete
• BS-1881-115 - Testing Concrete, Specification for Compression Testing Machines for Concrete
• BS-1881-116 - Method for Determination of Compressive Strength of Concretecubes
• BS-1881-117 - Testing Concrete, Method for Determination of Tensile Splitting Strength
• BS-1881-118 - Method for Determination of Flexural Strength
• BS-1881-119 - Testing concrete
• BS-1881-121 - Testing concrete
• BS-1881-122 - Testing concrete
• BS-1881-124 - Testing Concrete
• BS-1881-124-TC - Tracked Changes. Testing concrete
• BS-1881-125 - Testing concrete
• BS-1881-127 - Method of Verifying the Performance of a Concrete Cube Compression Machine Using the C
• BS-1881-128 - Testing concrete. Methods for analysis of fresh concrete
• BS-1881-129 - Testing concrete
• BS-1881-130 - Testing concrete
• BS-1881-201 - Testing concrete. Guide to the use of non-destructive methods of test for hardened concrete
• BS-1881-202 - Testing concrete. Recommendations for surface hardness testing by rebound hammer
• BS-1881-203 - Testing Concrete, Recommendations for Measurement of Velocity of Ultrasonic Pulses In
• BS-1881-204 - Testing concrete
• BS-1881-205 - Recommendations for Radiography of Concrete
• BS-1881-206 - Testing concrete
• BS-1881-207 - Testing concrete
• BS-1881-208 - Testing concrete
• BS-1881-209 - Testing concrete
• BS-1881-210 - Testing hardened concrete
• BS-1881-211 - Testing concrete
• BS-1881-5 - Testing concrete. Methods of testing hardened concrete for other than strength
• BS-1881-6 - Methods of testing concrete. Analysis of hardened concrete
• BS-2787 - Glossary of terms for concrete and reinforced concrete
• BS-3148 - Methods of Test for Water for Making Concrete (Including Notes on the Suitability of T
• BS-5075-1 - Concrete admixtures. Specification for accelerating admixtures, retarding admixtures and water reducing admixtures
• BS-5075-2 - Concrete admixtures. Specification for air-entraining admixtures
• BS-5075-3 - Concrete admixtures
• BS-5080-1 - Structural fixings in concrete and masonry. Method of test for tensile loading
• BS-5080-2 - Structural fixings in concrete and masonry. Method for determination of resistance to loading in shear
• BS-5328 - Methods for specifying concrete, including ready-mixed concrete
• BS-5328-1 - Concrete. Guide to specifying concrete
• BS-5328-2 - Concrete. Methods for specifying concrete mixes
• BS-5328-3 - Concrete. Specification for the procedures to be used in producing and transporting concrete
• BS-5328-4 - Concrete. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete
• BS-5911-1 - Concrete pipes and ancillary concrete
• BS-5911-1-TC - Tracked Changes. Concrete pipes and ancillary concrete
• BS-5911-3 - Concrete pipes and ancillary concrete products
• BS-5911-4 - Concrete pipes and ancillary concrete products
• BS-6073-1 - Specification for Precast Concrete Masonry Units, Precast Concrete Masonry Units
• BS-6073-2 - Precast concrete masonry units
• BS-6089 - Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791
• BS-6100-6.2 - Glossary of building and civil engineering terms. Concrete and plaster. Concrete
• BS-6100-6.4 - Glossary of building and civil engineering terms. Concrete and plaster. Admixtures
• BS-6100-6.6.1 - Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Concrete and mortar
• BS-6100-9 - Building and civil engineering. Vocabulary
• BS-7263-1 - Precast, Unreinforced Concrete Paving Flags & Complementary Fittings, Requirements &
• BS-7263-3 - Precast, Unreinforced Concrete Kerbs, Channels, Edgings & Quadrants. Requirements And
• BS-7533-101 - Pavements constructed with clay, concrete or natural stone paving units
• BS-8443 - Specification for establishing the suitability of special purpose concrete admixtures
• BS-8500-1 - Concrete. Complementary British Standard to BS EN 206
• BS-8500-1-TC - Tracked Changes. Concrete. Complementary British Standard to BS EN 206
• BS-8500-2 - Concrete. Complementary British Standard to BS EN 206
• BS-8500-2 EXCOMM - Expert Commentary for BS8500-2:2023 Concrete. Complementary guidance to BS EN 206. Specification for constituent materials and concrete
• BS-8500-2-TC - Tracked Changes. Concrete. Complementary British Standard to BS EN 206
• BS-EN-1008 - Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
• BS-EN-1168 - Precast concrete products. Hollow core slabs
• BS-EN-1169 - Precast concrete products. General rules for factory production control of glass-fibre reinforced cement
• BS-EN-12004-2 - Adhesives for ceramic tiles
• BS-EN-12269-1 - Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the 'beam test'
• BS-EN-12269-2 - Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test
• BS-EN-12350-1 - Testing fresh concrete
• BS-EN-12350-10 - Testing fresh concrete
• BS-EN-12350-11 - Testing fresh concrete
• BS-EN-12350-12 - Testing fresh concrete
• BS-EN-12350-2 - Testing fresh concrete
• BS-EN-12350-3 - Testing fresh concrete
• BS-EN-12350-4 - Testing fresh concrete
• BS-EN-12350-5 - Testing fresh concrete
• BS-EN-12350-6 - Testing fresh concrete
• BS-EN-12350-7 - Testing fresh concrete
• BS-EN-12350-8 - Testing fresh concrete
• BS-EN-12350-9 - Testing fresh concrete
• BS-EN-12390-1 - Testing hardened concrete
• BS-EN-12390-10 - Testing hardened concrete
• BS-EN-12390-11 - Testing hardened concrete
• BS-EN-12390-11-TC - Tracked Changes. Testing hardened concrete
• BS-EN-12390-12 - Testing hardened concrete
• BS-EN-12390-13 - Testing hardened concrete
• BS-EN-12390-14 - Testing hardened concrete
• BS-EN-12390-15 - Testing hardened concrete
• BS-EN-12390-16 - Testing hardened concrete
• BS-EN-12390-17 - Testing hardened concrete
• BS-EN-12390-18 - Testing hardened concrete
• BS-EN-12390-19 - Testing of hardened concrete. Determination of electrical resistivity
• BS-EN-12390-2 - Testing hardened concrete
• BS-EN-12390-3 - Testing hardened concrete
• BS-EN-12390-4 - Testing hardened concrete
• BS-EN-12390-5 - Testing hardened concrete
• BS-EN-12390-6 - Testing hardened concrete
• BS-EN-12390-7 - Testing hardened concrete
• BS-EN-12390-8 - Testing hardened concrete
• BS-EN-12504-1 - Testing concrete in structures
• BS-EN-12504-2 - Testing concrete in structures
• BS-EN-12504-4 - Testing concrete
• BS-EN-12602 - Prefabricated reinforced components of autoclaved aerated concrete
• BS-EN-12620 - Aggregates for concrete
• BS-EN-12737 - Precast concrete products. Floor slats for livestock
• BS-EN-12794 - Precast concrete products. Foundation piles
• BS-EN-12839 - Precast concrete products. Elements for fences
• BS-EN-12843 - Precast concrete products. Masts and poles
• BS-EN-13224 - Precast concrete products. Ribbed floor elements
• BS-EN-13225 - Precast concrete products. Linear structural elements
• BS-EN-1323 - Adhesives for tiles. Concrete slabs for tests
• BS-EN-13230-1 - Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-1-TC - Tracked Changes. Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-2 - Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-2-TC - Tracked Changes. Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-3 - Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-3-TC - Tracked Changes. Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-4 - Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-5 - Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-5-TC - Tracked Changes. Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13230-6 - Railway applications. Track. Concrete sleepers and bearers
• BS-EN-13263-1 - Silica fume for concrete
• BS-EN-13263-2 - Silica fume for concrete
• BS-EN-13369 - Common rules for precast concrete products
• BS-EN-13369-TC - Tracked Changes. Common rules for precast concrete products
• BS-EN-13395-3 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability
• BS-EN-1351 - Determination of flexural strength of autoclaved aerated concrete
• BS-EN-1352 - Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• BS-EN-1353 - Determination of moisture content of autoclaved aerated concrete
• BS-EN-1354 - Determination of compressive strength of lightweight aggregate concrete with open structure
• BS-EN-1355 - Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• BS-EN-1356 - Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load
• BS-EN-13577 - Chemical attack on concrete. Determination of aggressive carbon dioxide content in water
• BS-EN-13579 - Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation
• BS-EN-13580 - Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations
• BS-EN-13581 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
• BS-EN-1367-1 - Tests for thermal and weathering properties of aggregates
• BS-EN-13687-1 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility
• BS-EN-13687-2 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility
• BS-EN-13687-3 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility
• BS-EN-13687-4 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility
• BS-EN-13687-5 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility
• BS-EN-13693 - Precast concrete products. Special roof elements
• BS-EN-13747 - Precast concrete products. Floor plates for floor systems
• BS-EN-13748-1 - Terrazzo tiles
• BS-EN-13748-2 - Terrazzo tiles
• BS-EN-13978-1 - Precast concrete products. Precast concrete garages
• BS-EN-14038-2 - Electrochemical realkalization and chloride extraction treatments for reinforced concrete
• BS-EN-14038-2-TC - Tracked Changes. Electrochemical realkalization and chloride extraction treatments for reinforced concrete
• BS-EN-14437 - Determination of the uplift resistance of installed clay or concrete tiles for roofing. Roof system test method
• BS-EN-14474 - Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods
• BS-EN-14487-1 - Sprayed concrete
• BS-EN-14487-2 - Sprayed concrete
• BS-EN-14488-1 - Testing sprayed concrete. Sampling fresh and hardened concrete
• BS-EN-14488-2 - Testing sprayed concrete
• BS-EN-14488-3 - Testing sprayed concrete
• BS-EN-14488-3-TC - Tracked Changes. Testing sprayed concrete.Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens.
• BS-EN-14488-4 - Testing sprayed concrete
• BS-EN-14488-5 - Testing sprayed concrete
• BS-EN-14488-6 - Testing sprayed concrete
• BS-EN-14488-7 - Testing sprayed concrete
• BS-EN-14629 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of chloride content in hardened concrete
• BS-EN-14630 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of carbonation depth in hardened concrete by the phenolphthalein method
• BS-EN-14649 - Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test)
• BS-EN-14650 - Precast concrete products. General rules for factory production control of metallic fibered concrete
• BS-EN-14651 - Test method for metallic fibre concrete. Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
• BS-EN-14721 - Test method for metallic fibre concrete. Measuring the fibre content in fresh and hardened concrete
• BS-EN-14843 - Precast concrete products. Stairs
• BS-EN-14844 - Precast concrete products. Box culverts
• BS-EN-14845-1 - Test methods for fibres in concrete
• BS-EN-14845-2 - Test methods for fibres in concrete
• BS-EN-14889-1 - Fibres for concrete
• BS-EN-14889-2 - Fibres for concrete
• BS-EN-14991 - Precast concrete products. Foundation elements
• BS-EN-14992 - Precast concrete products. Wall elements
• BS-EN-15037-1 - Precast concrete products. Beam-and-block floor systems
• BS-EN-15037-2 - Precast concrete products. Beam-and-block floor systems
• BS-EN-15037-3 - Precast concrete products. Beam-and-block floor systems
• BS-EN-15037-4 - Precast concrete products. Beam-and-block floor systems
• BS-EN-15037-5 - Precast concrete products. Beam-and-block floor systems
• BS-EN-15050 - Precast concrete products. Bridge elements
• BS-EN-15191 - Precast concrete products. Classification of glassfibre reinforced concrete performance
• BS-EN-1520 - Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
• BS-EN-1521 - Determination of flexural strength of lightweight aggregate concrete with open structure
• BS-EN-15304 - Determination of the freeze-thaw resistance of autoclaved aerated concrete
• BS-EN-15361 - Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
• BS-EN-15422 - Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes
• BS-EN-15435 - Precast concrete products. Normal weight and lightweight concrete shuttering blocks. Product properties and performance
• BS-EN-1544 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars
• BS-EN-15498 - Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
• BS-EN-15564 - Precast concrete products. Resin bound concrete. Requirements and test methods
• BS-EN-16622 - Silica-calcium fume for concrete. Definitions, requirements and conformity criteria
• BS-EN-16757 - Sustainability of construction works. Environmental product declarations. Product Category Rules for concrete and concrete elements
• BS-EN-1739 - Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• BS-EN-1766 - Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
• BS-EN-1766-TC - Tracked Changes. Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
• BS-EN-1857 - Chimneys. Components. Concrete flue liners
• BS-EN-1858 - Chimneys. Components. Concrete flue blocks
• BS-EN-1881 - Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method
• BS-EN-196-10 - Methods of testing cement
• BS-EN-206 - Concrete. Specification, performance, production and conformity
• BS-EN-206-1 - Concrete. Specification, performance, production and conformity
• BS-EN-206-9 - Concrete
• BS-EN-445 - Grout for prestressing tendons. Test methods
• BS-EN-446 - Grout for prestressing tendons. Grouting procedures
• BS-EN-447 - Grout for prestressing tendons. Basic requirements
• BS-EN-450 - Fly ash for concrete. Definitions, requirements and quality control
• BS-EN-450-1 - Fly ash for concrete
• BS-EN-450-2 - Fly ash for concrete
• BS-EN-451-1 - Method of testing fly ash
• BS-EN-451-1-TC - Tracked Changes. Method of testing fly ash
• BS-EN-451-2 - Method of testing fly ash
• BS-EN-451-2-TC - Tracked Changes. Method of testing fly ash
• BS-EN-480-1 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-10 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-11 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-12 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-14 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-15 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-15-TC - Tracked Changes. Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-2 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-4 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-5 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-6 - Admixtures for concrete, mortar and grout. Test methods
• BS-EN-480-6-TC - Tracked Changes. Admixtures for concrete, mortar and grout. Test methods
• BS-EN-490 - Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
• BS-EN-491 - Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
• BS-EN-679 - Determination of the compressive strength of autoclaved aerated concrete
• BS-EN-680 - Determination of the drying shrinkage of autoclaved aerated concrete
• BS-EN-771-3 - Specification for masonry units
• BS-EN-771-4 - Specification for masonry units
• BS-EN-771-5 - Specification for masonry units
• BS-EN-772-10 - Methods of test for masonry units
• BS-EN-772-11 - Methods of test for masonry units
• BS-EN-772-14 - Methods of test for masonry units
• BS-EN-772-15 - Methods of test for masonry units
• BS-EN-772-6 - Methods of test for masonry units
• BS-EN-934-1 - Admixtures for concrete, mortar and grout
• BS-EN-934-2 - Admixtures for concrete, mortar and grout
• BS-EN-934-3 - Admixtures for concrete, mortar and grout
• BS-EN-934-4 - Admixtures for concrete, mortar and grout
• BS-EN-934-5 - Admixtures for concrete, mortar and grout
• BS-EN-934-6 - Admixtures for concrete, mortar and grout
• BS-EN-990 - Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
• BS-EN-ISO-15630-1 - Steel for the reinforcement and prestressing of concrete. Test methods
• BS-EN-ISO-15630-2 - Steel for the reinforcement and prestressing of concrete. Test methods
• BS-EN-ISO-15630-3 - Steel for the reinforcement and prestressing of concrete. Test methods
• BSI-Flex-350 - Alternative binder systems for lower carbon concrete. Code of practice
• BSI-Flex-350-v1.0 - Alternative binder systems for lower carbon concrete. Code of Practice
• BS-ISO-13315-1 - Environmental management for concrete and concrete structure
• BS-ISO-13315-3 - Environmental management for concrete and concrete structures.Production of concrete constituents and concrete.
• BS-ISO-13315-6 - Environmental management for concrete and concrete structures
• BS-ISO-13315-8 - Environmental management for concrete and concrete structures
• BS-ISO-14824-1 - Grout for prestressing tendons
• BS-ISO-14824-2 - Grout for prestressing tendons
• BS-ISO-14824-3 - Grout for prestressing tendons
• BS-ISO-16311-4 - Maintenance and repair of concrete structures
• BS-ISO-16711 - Requirements for seismic assessment and retrofit of concrete structures
• BS-ISO-17785-2 - Testing methods for pervious concrete
• BS-ISO-1920-14 - Testing of concrete
• BS-ISO-1920-3 - Testing of concrete
• BS-ISO-1920-4 - Testing of concrete
• BS-ISO-1920-6 - Testing of concrete
• BS-ISO-1920-8 - Testing of concrete
• BS-ISO-1920-9 - Testing of concrete
• BS-ISO-20290-1 - Aggregates for concrete. Test methods for mechanical and physical properties
• BS-ISO-20290-2 - Aggregates for concrete. Test methods for mechanical and physical properties
• BS-ISO-20290-3 - Aggregates for concrete. Test methods for mechanical and physical properties
• BS-ISO-20290-4 - Aggregates for concrete. Test methods for mechanical and physical properties
• BS-ISO-20290-5 - Aggregates for concrete. Test methods for mechanical and physical properties
• BS-ISO-22904 - Additions for concrete
• BS-ISO-23945-1 - Test methods for sprayed concrete
• BS-ISO-24684-2 - Aggregates for concrete. Test methods for chemical properties
• DD-216 - Method for determination of chloride content of fresh concrete
• DD-83 - Assessment of the Composition of Fresh Concrete
• DD-88 - Method for the assessment of pot life of non-flowing resin compositions for use in civil engineering
• DD-92 - Method for temperature-matched curing of concrete specimens
• DD-CEN-12390-10 - Testing hardened concrete. Determination of the relative carbonation resistance of concrete
• DD-CEN-12390-11 - Testing hardened concrete
• DD-CEN-12390-9 - Testing hardened concrete
• DD-CEN-14754-1 - Curing compounds. Test methods. Determination of water retention efficiency of common curing compounds
• DD-CEN-15087 - Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing. Test method for mechanical fasteners
• DD-ENV-206 - Concrete, Performance, Production, Placing & Compliance Criteria
• PD-6682-1 - Aggregates
• PD-6682-3 - Aggregates
• PD-6682-9 - Aggregates
• PD-CEN-12390-9 - Testing hardened concrete
• PD-CEN-12390-9-TC - Tracked Changes. Testing hardened concrete
• PD-CEN-14862 - Precast concrete products. Full-scale testing requirements in standards on precast concrete products
• PD-CEN-15678 - Concrete. Release of regulated dangerous substances into soil, groundwater and surface water. Test method for new or unapproved constituents of concrete and for production concretes
• PD-CEN-15728 - Design and use of inserts for lifting and handling of precast concrete elements
• PD-CEN-15728-TC - Tracked Changes. Design and use of inserts for lifting and handling of precast concrete elements
• PD-CEN-15739 - Precast concrete products. Concrete finishes. Identification
• PD-CEN-15840 - Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2
• PD-CEN-15868 - Survey on provisions valid in the place of use used in conjunction with the European concrete standard and developing practice
• PD-CEN-16349 - Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
• PD-CEN-16369 - Use of control charts in the production of concrete
• PD-CEN-16443 - Backgrounds to the revision of EN 450-1:2005+A1:2007. Fly ash for concrete
• PD-CEN-16563 - Principles of the equivalent durability procedure
• PD-CEN-16639 - Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept
• PD-CEN-17172 - Validation testing program on chloride penetration and carbonation standardized test methods
• PD-CEN-17172-TC - Tracked Changes. Validation testing program on chloride penetration and carbonation standardized test methods
• PD-CEN-17310 - Carbonation and CO₂ uptake in concrete

ISO:

• ISO-10406-1 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 1: FRP bars and grids
• ISO-10406-2 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 2: FRP sheets
• ISO-10406-3 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 3: CFRP strips
• ISO-12439 - Mixing water for concrete
• ISO-13315-1 - Environmental management for concrete and concrete structures - Part 1: General principles
• ISO-13315-2 - Environmental management for concrete and concrete structures - Part 2: System boundary and inventory data
• ISO-13315-3 - Environmental management for concrete and concrete structures - Part 3: Production of concrete constituents and concrete
• ISO-13315-4 - Environmental management for concrete and concrete structures - Part 4: Environmental design of concrete structures
• ISO-13315-6 - Environmental management for concrete and concrete structures - Part 6: Use of concrete structures
• ISO-13315-8 - Environmental management for concrete and concrete structures - Part 8: Environmental labels and declarations
• ISO-14484 - Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
• ISO-14824-1 - Grout for prestressing tendons - Part 1: Basic requirements
• ISO-14824-2 - Grout for prestressing tendons - Part 2: Grouting procedures
• ISO-14824-3 - Grout for prestressing tendons - Part 3: Test methods
• ISO-16311-1 - Maintenance and repair of concrete structures - Part 1: General principles
• ISO-16311-2 - Maintenance and repair of concrete structures - Part 2: Assessment of existing concrete structures
• ISO-16311-3 - Maintenance and repair of concrete structures - Part 3: Design of repairs
• ISO-16311-4 - Maintenance and repair of concrete structures - Part 4: Execution of repairs
• ISO-16711 - Requirements for seismic assessment and retrofit of concrete structures
• ISO-17785-1 - Testing methods for pervious concrete - Part 1: Infiltration rate
• ISO-17785-2 - Testing methods for pervious concrete - Part 2: Density and void content
• ISO-17785-3 - Testing methods for pervious concrete - Part 3: Resistance of surface degradation
• ISO-18319-2 - Fibre reinforced polymer (FRP) reinforcement for concrete structures - Part 2: Specifications of CFRP strips
• ISO-19044 - Test methods for fibre-reinforced cementitious composites - Load-displacement curve using notched specimen
• ISO-1920-1 - Testing of concrete - Part 1: Sampling of fresh concrete
• ISO-1920-10 - Testing of concrete - Part 10: Determination of static modulus of elasticity in compression
• ISO-1920-11 - Testing of concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
• ISO-1920-12 - Testing of concrete - Part 12: Determination of the carbonation resistance of concrete - Accelerated carbonation method
• ISO-1920-13 - Testing of concrete - Part 13: Properties of fresh self compacting concrete
• ISO-1920-14 - Testing of concrete - Part 14: Setting time of concrete mixtures by resistance to penetration
• ISO-1920-2 - Testing of concrete - Part 2: Properties of fresh concrete
• ISO-1920-3 - Testing of concrete - Part 3: Making and curing test specimens
• ISO-1920-4 - Testing of concrete - Part 4: Strength of hardened concrete
• ISO-1920-5 - Testing of concrete - Part 5: Density and water penetration depth
• ISO-1920-6 - Testing of concrete - Part 6: Sampling, preparing and testing of concrete cores
• ISO-1920-7 - Testing of concrete - Part 7: Non-destructive tests on hardened concrete
• ISO-1920-8 - Testing of concrete - Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
• ISO-1920-9 - Testing of concrete - Part 9: Determination of creep of concrete cylinders in compression
• ISO-19595 - Natural aggregates for concrete
• ISO-19596 - Admixtures for concrete
• ISO-20290-1 - Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
• ISO-20290-2 - Aggregates for concrete - Test methods for mechanical and physical properties - Part 2: Method for determination of resistance to fragmentation by Los Angeles Test (LA-Test)
• ISO-20290-3 - Aggregates for concrete - Test methods for mechanical and physical properties - Part 3: Determination of aggregate crushing value (ACV)
• ISO-20290-4 - Aggregates for concrete - Test methods for mechanical and physical properties - Part 4: Determination of ten percent fines value (TFV)
• ISO-20290-5 - Aggregates for concrete - Test methods for mechanical and physical properties - Part 5: Determination of particle size distribution by sieving method
• ISO-21022 - Test method for fibre-reinforced cementitious composites - Load-deflection curve using circular plates
• ISO-21914 - Test methods for fibre-reinforced cementitious composites - Bending moment - Curvature curve by four-point bending test
• ISO-22873 - Quality control for batching and mixing steel fibre-reinforced concretes
• ISO-22904 - Additions for concrete
• ISO-22965-1 - Concrete - Part 1: Methods of specifying and guidance for the specifier
• ISO-22965-2 - Concrete - Part 2: Specification of constituent materials, production of concrete and compliance of concrete
• ISO-23523 - Test methods for discrete polymer fibre for fibre-reinforced cementitious composites
• ISO-23945-1 - Test methods for sprayed concrete - Part 1: Flash setting accelerating admixtures - Setting time
• ISO-24684-2 - Aggregates for concrete - Test methods for chemical properties - Part 2: Determination of soluble sulfate salts
• ISO-3893 - Concrete -- Classification by compressive strength
• ISO-4012 - Concrete -- Determination of compressive strength of test specimens
• ISO-4013 - Concrete -- Determination of flexural strength of test specimens
• ISO-4103 - Concrete -- Classification of consistency
• ISO-4108 - Concrete -- Determination of tensile splitting strength of test specimens
• ISO-4109 - Fresh concrete -- Determination of the consistency -- Slump test
• ISO-4110 - Fresh concrete -- Determination of the consistency -- Vebe test
• ISO-4111 - Fresh concrete -- Determination of consistency -- Degree of compactibility (Compaction index)
• ISO-4848 - Concrete -- Determination of air content of freshly mixed concrete -- Pressure method
• ISO-6274 - Concrete -- Sieve analysis of aggregates
• ISO-6276 - Concrete, compacted fresh -- Determination of density
• ISO-6782 - Aggregates for concrete -- Determination of bulk density
• ISO-6783 - Coarse aggregates for concrete -- Determination of particle density and water absorption -- Hydrostatic balance method
• ISO-6784 - Concrete -- Determination of static modulus of elasticity in compression
• ISO-7033 - Fine and coarse aggregates for concrete -- Determination of the particle mass-per-volume and water absorption -- Pycnometer method

Other SDOs:

• ACI-310R - Guide to Decorative Concrete
• ACI-372R - Guide to Design and Construction of Circular Wire-and-Strand-Wrapped Prestressed Concrete Structures
• ACI-373R - Design and Construction of Circular Prestressed Concrete Structures with Circumferential Tendons
• ACI-374.2R - Guide for Testing Reinforced Concrete Structural Elements under Slowly Applied Simulated Seismic Loads
• ACI-408.2R - Report on Bond of Steel Reinforcing Bars Under Cyclic Loads
• ACI-437 - Code Requirements For Load Testing of Existing Concrete Structures (an ACI Provisional Standard) and Commentary
• ACI-440.3 - Guide Test Methods for Fiber-Reinforced Polymer (FRP) Composites for Reinforcing or Strengthening Concrete and Masonry Structures
• ACI-530 - Building Code Requirements and Specification for Masonry Structures and Companion Commentaries
• ACI-549.4R - Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) Systems for
• DIN-1045-2/A1 - Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, properties, production and conformity; Application rules for DIN EN 206-1; Amendment A1
• DIN-EN-1168 - Precast concrete products - Hollow core slabs
• DIN-EN-12390-3 - Part 3: Compressive Strength of Test Specimens, Testing Hardened Concrete
• DIN-EN-12504-3 - Part 3: Determination of Pull-Out Force, Testing Concrete in Structures
• DIN-EN-12504-4 - Part 4: Determination of Ultrasonic Pulse Velocity, Testing Concrete in Structures
• DIN-EN-12620 - Aggregates for concrete; German version EN 12620:2013
• DIN-EN-12737 - Precast Concrete Products, Floor Slats for Livestock
• DIN-EN-12794 - Precast Concrete Products - Foundation Piles
• DIN-EN-12843 - Precast Concrete Products - Masts & Poles
• DIN-EN-13224 - Precast concrete products - Ribbed floor elements; German version EN 13224:2011
• DIN-EN-13225 - Precast concrete products - Linear structural elements; German version EN 13225:2013
• DIN-EN-13263-1 - Part 1: Definitions, Requirements & Conformity Criteria, Silica Fume for Concrete
• DIN-EN-13263-2 - Part 2: Conformity Evaluation, Silica Fume for Concrete
• DIN-EN-13369 - Common rules for precast concrete products; German version EN 13369:2013
• DIN-EN-13369/A1 - Amendment 1 for Din-En-13369, Common Rules for Precast Concrete Products
• DIN-EN-1354 - Determination of Compressive Strength of Lightweight Aggregate Concrete With Open Stru
• DIN-EN-13693 - Precast Concrete Products - Special Roof Elements
• DIN-EN-13747 - Precast Concrete Products - Floor Plates for Floor Systems
• DIN-EN-13748-1 - Part 1: Terrazzo Tiles for Internal Use, Terrazzo Tiles
• DIN-EN-13748-2 - Part 2: Terrazzo Tiles for External Use, Terrazzo Tiles
• DIN-EN-13978-1 - Part 1: Requirements for Reinforced Garages Monolithic or Consisting of Single Section
• DIN-EN-14437 - Determination of the Uplift Resistance of Installed Clay or Concrete Tiles for Roofin
• DIN-EN-14474 - Precast Concrete Products, Concrete With Wood Chips as Aggregate, Requirements & Test
• DIN-EN-14487-1 - Part 1: Definitions, Specifications & Conformity, Sprayed Concrete
• DIN-EN-14487-2 - Part 2: Execution, Sprayed Concrete
• DIN-EN-14488-1 - Part 1: Sampling Fresh & Hardened Concrete, Testing Sprayed Concrete
• DIN-EN-14488-2 - Part 2: Compressive Strength of Young Sprayed Concrete, Testing Sprayed Concrete
• DIN-EN-14488-3 - Part 3: Flexural Strengths (First Peak, Ultimate & Residual) of Fibre Reinforced Beam
• DIN-EN-14488-4 - Part 4: Bond Strength of Cores by Direct Tension, Testing Sprayed Concrete
• DIN-EN-14488-5 - Part 5: Determination of Energy Absorption Capacity of Fibre Reinforced Slab Specimens
• DIN-EN-14488-6 - Part 6: Thickness of Concrete on a Substrate, Testing Sprayed Concrete
• DIN-EN-14488-7 - Part 7: Fibre Content of Fibre Reinforced Concrete, Testing Sprayed Concrete
• DIN-EN-14649 - Precast Concrete Products, Test Method for Strength Retention of Glass Fibres in Cemen
• DIN-EN-14650 - Precast Concrete Products, General Rules for Factory Production Control of Metallic Fi
• DIN-EN-14651 - Test Method for Metallic Fibre Concrete - Measuring the Flexural Tensile Strength (Lim
• DIN-EN-14721 - Test Method for Metallic Fibre Concrete - Measuring the Fibre Content in Fresh & Harde
• DIN-EN-14844 - Precast concrete products - Box culverts
• DIN-EN-14845-2 - Part 2: Effect on Concrete, Test Methods for Fibres in Concrete
• DIN-EN-14889-1 - Part 1: Steel Fibres - Definitions, Specifications & Conformity, Fibres for Concrete
• DIN-EN-14889-2 - Part 2: Polymer Fibres - Definitions, Specifications & Conformity, Fibres for Concrete
• DIN-EN-1520 - Prefabricated Reinforced Components of Lightweight Aggregate Concrete With Open Struct
• DIN-EN-15361 - Determination of the Influence of the Corrosion Protection Coating on the Anchorage Ca
• DIN-EN-1857 - Chimneys - Components - Concrete Flue Liners
• DIN-EN-1858 - Chimneys - Components - Concrete flue blocks
• DIN-EN-206-1/A1 - Concrete, Part 1: Specification, Performance, Production & Conformity
• DIN-EN-206-1/A2 - Concrete, Part 1: Specification, Performance, Production & Conformity
• DIN-EN-40-4 - Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005
• DIN-EN-450-1 - Fly ash for concrete - Part 1: Definition, specifications and conformity criteria; German version EN 450-1:2012
• DIN-EN-450-2 - Part 2: Conformity Evaluation, Fly Ash for Concrete
• DIN-EN-451-1 - Method of testing fly ash - Part 1: Determination of free calcium oxide content; German version EN 451-1:2017
• DIN-EN-480-1 - Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; German version EN 480-1:2014
• DIN-EN-480-11 - Part 11: Determination of Air Void Characteristics in Hardened Concrete, Admixtures Fo
• DIN-EN-480-12 - Part 12: Determination of the Alkali Content of Admixtures, Admixtures for Concrete,
• DIN-EN-480-14 - Part 14: Determination of the Effect on Corrosion Susceptibility of Reinforcing Steel
• DIN-EN-480-2 - Part 2: Determination of Setting Time, Admixtures for Concrete, Mortar & Grout - Test
• DIN-EN-480-4 - Part 4: Determination of Bleeding of Concrete, Admixtures for Concrete, Mortar & Grout
• DIN-EN-480-5 - Part 5: Determination of Capillary Absorption, Admixtures for Concrete, Mortar & Grout
• DIN-EN-480-6 - Part 6: Infrared Analysis, Admixtures for Concrete, Mortar & Grout - Test Methods
• DIN-EN-490 - Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications; German version EN 490:2011+A1:2017
• DIN-EN-491 - Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
• DIN-EN-679 - Determination of the Compressive Strength of Autoclaved Aerated Concrete
• DIN-EN-680 - Determination of the Drying Shrinkage of Autoclaved Aerated Concrete
• DIN-EN-771-3 - Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
• DIN-EN-771-4 - Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
• DIN-EN-771-5 - Specification for masonry units - Part 5: Manufactured stone masonry units
• DIN-EN-772-11 - Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
• DIN-EN-772-2 - Part 2: Determination of Percentage Area of Voids in Masonry Units (by Paper Indentati
• DIN-EN-772-20 - Part 20: Determination of Flatness of Faces of Masonry Units, Methods of Test for Maso
• DIN-EN-934-2/A1 - Amendment 1: Admixtures for Concrete, Mortar & Grout - Concrete Admixtures, Part 2: De
• DIN-EN-934-2/A2 - Amendment 2: Admixtures for Concrete, Mortar & Grout - Part 2: Concrete Admixtures -
• DIN-EN-934-4/A1 - Amendment 1: Admixtures for Concrete, Mortar & Grout - Admixtures for Grout for Presst
• DIN-EN-934-6 - Part 6: Sampling, Conformity Control & Evaluation of Conformity, Admixtures for Concre
• DIN-V-4165 - Medium-Format & Large-Format Autovclaved Aerated Concrete Masonry Blocks Laid in Thin
• EN-1168 - Precast Concrete Products - Hollow Core Slabs
• EN-12004-2 - Adhesives for ceramic tiles - Part 2: Test methods
• EN-12269-2 - Part 2: Long-Term Test, Determination of the Bond Behaviour Between Reinforcing Steel
• EN-12350-10 - Part 10: Self-Compacting Concrete - l Box Test, Testing Fresh Concrete
• EN-12350-11 - Part 11: Self-Compacting Concrete - Sieve Segregation Test, Testing Fresh Concrete
• EN-12350-12 - Part 12: Self-Compacting Concrete - J-Ring Test, Testing Fresh Concrete
• EN-12350-2 - Part 2: Slum-Test, Testing Fresh Concrete
• EN-12350-3 - Part 3: Vebe Test, Testing Fresh Concrete
• EN-12350-4 - Part 4: Degree of Compactability, Testing Fresh Concrete
• EN-12350-5 - Part 5: Flow Table Test, Testing Fresh Concrete
• EN-12350-6 - Part 6: Density, Testing Fresh Concrete
• EN-12350-7 - Part 7: Air Content - Pressure Methods, Testing Fresh Concrete
• EN-12350-8 - Part 8: Self-Compacting Concrete - Slump-Flow Test, Testing Fresh Concrete
• EN-12350-9 - Part 9: Self-Compacting Concrete - V-Funnel Test, Testing Fresh Concrete
• EN-12390-1 - Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
• EN-12390-11 - Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
• EN-12390-13 - Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
• EN-12390-14 - Testing hardened concrete - Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process
• EN-12390-15 - Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process
• EN-12390-2 - Testing Hardened Concrete, Making & Curing Specimens for Strength Tests
• EN-12390-3 - Part 3: Compressive Strength of Test Specimens, Testing Hardened Concrete
• EN-12390-5 - Part 5: Flexural Strength of Test Specimens, Testing Hardened Concrete
• EN-12390-6 - Testing Hardened Concrete, Tensile Splitting Strength of Test Specimens
• EN-12390-7 - Part 7: Density of Hardened Concrete, Testing Hardened Concrete
• EN-12390-8 - Part 8: Depth of Penetration of Water Under Pressure, Testing Hardened Concrete
• EN-12504-1 - Testing Concrete in Structures, Cored Specimens, Taking, Examining & Testing in Compre
• EN-12504-2 - Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
• EN-12504-3 - Part 3: Determination of Pull-Out Force, Testing Concrete in Structures
• EN-12504-4 - Part 4: Determination of Ultrasonic Pulse Velocity, Testing Concrete in Structures
• EN-12602 - Prefabricated reinforced components of autoclaved aerated concrete
• EN-12737 - Precast Concrete Products, Floor Slats for Livestock
• EN-12794 - Precast Concrete Products - Foundation Piles
• EN-12839 - Precast concrete products - Elements for fences
• EN-12843 - Precast Concrete Products - Masts & Poles
• EN-13224 - Precast concrete products - Ribbed floor elements
• EN-13225 - Precast concrete products - Linear structural elements
• EN-1323 - Adhesives for Tiles - Concrete Slabs for Tests
• EN-13230-1 - Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
• EN-13230-2 - Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers
• EN-13230-3 - Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
• EN-13230-4 - Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings
• EN-13230-5 - Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements
• EN-13263-1 - Part 1: Definitions, Requirements & Conformity Criteria, Silica Fume for Concrete
• EN-13263-2 - Part 2: Conformity Evaluation, Silica Fume for Concrete
• EN-13369 - Common rules for precast concrete products
• EN-13369/A1 - Common Rules for Precast Concrete Products
• EN-1351 - Determination of Flexural Strength of Autoclaved Aerated Concrete
• EN-1352 - Determination of Static Modulus of Elasticity Under Compression of Autoclaved Aerated
• EN-1353 - Determination of Moisture Content of Autoclaved Aerated Concrete
• EN-1354 - Determination of Compressive Strength of Lightweight Aggregate Concrete With Open Stru
• EN-1355 - Determination of Creep Strains Under Compression of Autoclaved Aerated Concrete or Lig
• EN-1356 - Performance Test for Prefabricated Reinforced Components of Autclaved Aerated Concret
• EN-13577 - Chemical Attack on Concrete, Determination of Aggressive Carbon Dioxide Content in Wat
• EN-1367-1 - Part 1: Determination of Resistance To Freezing & Thawing, Tests for Thermal & Weather
• EN-13687-4 - Part 4: Dry Thermal Cycling, Products & Systems for the Protection & Repair of Concret
• EN-13693 - Precast Concrete Products - Special Roof Elements
• EN-13747 - Precast Concrete Products - Floor Plates for Floor Systems
• EN-13748-1 - Part 1: Terrazzo Tiles for Internal Use, Terrazzo Tiles
• EN-13748-2 - Part 2: Terrazzo Tiles for External Use, Terrazzo Tiles
• EN-13978-1 - Part 1: Requirements for Reinforced Garages Monolithic or Consisting of Single Section
• EN-14437 - Determination of the Uplift Resistance of Installed Clay or Concrete Tiles for Roofin
• EN-14474 - Precast Concrete Products, Concrete With Wood Chips as Aggregate, Requirements & Test
• EN-14487-1 - Part 1: Definitions, Specifications & Conformity, Sprayed Concrete
• EN-14487-2 - Part 2: Execution, Sprayed Concrete
• EN-14488-1 - Part 1: Sampling Fresh & Hardened Concrete, Testing Sprayed Concrete
• EN-14488-2 - Part 2: Compressive Strength of Young Sprayed Concrete, Testing Sprayed Concrete
• EN-14488-3 - Part 3: Flexural Strengths (First Peak, Ultimate & Residual) of Fibre Reinforced Beam
• EN-14488-4 - Part 4: Bond Strength of Cores by Direct Tension, Testing Sprayed Concrete
• EN-14488-5 - Part 5: Determination of Energy Absorption Capacity of Fibre Reinforced Slab Specimens
• EN-14488-6 - Part 6: Thickness of Concrete on a Substrate, Testing Sprayed Concrete
• EN-14488-7 - Part 7: Fibre Content of Fibre Reinforced Concrete, Testing Sprayed Concrete
• EN-14629 - Products & Systems for the Protection & Repair of Concrete Structures, Test Methods, D
• EN-14630 - Products & Systems for the Protection & Repair of Concrete Structures - Test Methods -
• EN-14649 - Precast Concrete Products, Test Method for Strength Retention of Glass Fibres in Cemen
• EN-14650 - Precast Concrete Products, General Rules for Factory Production Control of Metallic Fi
• EN-14721 - Test Method for Metallic Fibre Concrete - Measuring the Fibre Content in Fresh & Harde
• EN-14843 - Precast Concrete Products, Stairs
• EN-14844 - Precast Concrete Products - Box Culverts
• EN-14845-1 - Part 1: Reference Concretes, Test Methods for Fibres in Concrete
• EN-14845-2 - Part 2: Effect on Concrete, Test Methods for Fibres in Concrete
• EN-14889-1 - Part 1: Steel Fibres - Definitions, Specifications & Conformity, Fibres for Concrete
• EN-14889-2 - Part 2: Polymer Fibres - Definitions, Specifications & Conformity, Fibres for Concrete
• EN-14991 - Precast Concrete Products, Foundation Elements
• EN-14992 - Precast Concrete Products, Wall Elements
• EN-15037-1 - Precast Concrete Products, Beam-&-Block Floor Systems, Beams
• EN-15037-2 - Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks
• EN-15037-3 - Precast Concrete Products, Beam&-Block Floor Systems, Clay Blocks
• EN-15037-4 - Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
• EN-15037-5 - Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork
• EN-15050 - Precast concrete products - Bridge elements
• EN-15191 - Precast Concrete Products, Classification of Glass Fibre Reinforced Concrete Performan
• EN-1520 - Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
• EN-1521 - Determination of Flexural Strength of Lightweight Aggregate Concrete With Open Struct
• EN-15304 - Determination of the Freeze-Thaw Resistance of Autoclaved Aerated Concrete
• EN-15361 - Determination of the Influence of the Corrosion Protection Coating on the Anchorage Ca
• EN-15422 - Precast Concrete Products - Specification of Glassfibres for Reinforcement of Mortars
• EN-15435 - Precast Concrete Products - Normal Weight & Lightweight Concrete Shuttering Blocks - P
• EN-1544 - Products & Systems for the Protection & Repair of Concrete Structures - Test Methods -
• EN-15498 - Precast Concrete Products - Wood-Chip Concrete Shuttering Blocks - Product Properties
• EN-15564 - Precast Concrete Products - Resin Bound Concrete - Requirements & Test Methods
• EN-16622 - Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
• EN-16757 - Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements
• EN-1739 - Determination of Shear Strength for In-Plane Forces of Joints Between Pre-Fabricated C
• EN-1857 - Chimneys - Components - Concrete Flue Liners
• EN-1858 - Chimneys, Components, Concrete Flue Blocks
• EN-1881 - Products & Systems for the Protection & Repair of Concrete Structures - Test Methods -
• EN-196-10 - Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement
• EN-206 - Concrete - Specification, performance, production and conformity
• EN-206-1/A1 - Concrete, Part 1: Specification, Performance, Production and Conformity
• EN-206-1/A2 - Concrete, Part 1: Specification, Performance, Production and Conformity
• EN-206-9 - Part 9: Additional Rules for Self-Compacting Concrete (SCC), Concrete
• EN-445 - Grout for Prestressing Tendons - Test Methods
• EN-446 - Grout for Prestressing Tendons - Grouting Procedures
• EN-447 - Grout for Prestressing Tendons - Basic Requirements
• EN-450-1 - Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
• EN-451-1 - Method of testing fly ash - Part 1: Determination of free calcium oxide content
• EN-451-2 - Method of testing fly ash - Part 2: Determination of fineness by wet sieving
• EN-480-1 - Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
• EN-480-10 - Part 10: Determination of Water Soluble Chloride Content, Admixtures for Concrete, Mor
• EN-480-11 - Part 11: Determination of Air Void Characteristics in Hardened Concrete, Admixtures Fo
• EN-480-12 - Part 12: Determination of the Alkali Content of Admixtures, Admixtures for Concrete,
• EN-480-14 - Part 14: Determination of the Effect on Corrosion Susceptibility of Reinforcing Steel
• EN-480-15 - Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
• EN-480-2 - Part 2: Determination of Setting Time, Admixtures for Concrete, Mortar & Grout - Test
• EN-480-4 - Part 4: Determination of Bleeding of Concrete, Admixtures for Concrete, Mortar & Grout
• EN-480-5 - Part 5: Determination of Capillary Absorption, Admixtures for Concrete, Mortar & Grout
• EN-480-6 - Part 6: Infrared Analysis, Admixtures for Concrete, Mortar & Grout - Test Methods
• EN-480-8 - Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
• EN-490 - Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
• EN-491 - Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
• EN-679 - Determination of the Compressive Strength of Autoclaved Aerated Concrete
• EN-680 - Determination of the Drying Shrinkage of Autoclaved Aerated Concrete
• EN-771-3 - Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
• EN-771-4 - Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
• EN-771-5 - Specification for masonry units - Part 5: Manufactured stone masonry units
• EN-772-10 - Part 10: Determination of Moisture Content of Calcium Silicate & Autoclaved Aerated Co
• EN-772-11 - Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
• EN-772-2 - Part 2: Determination of Percentage Area of Voids in Masonry Units (by Paper Indentati
• EN-772-20 - Part 20: Determination of Flatness of Faces of Masonry Units, Methods of Test for Maso
• EN-772-9 - Part 9: Determination of Volume & Percentage of Voids & Net Volume of Clay & Calcium
• EN-934-1 - Part 1: Common Requirements, Admixtures for Concrete, Mortar & Grout
• EN-934-2 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
• EN-934-2/A1 - Amendment 2: Admixtures for Concrete, Mortar & Grout - Concrete Admixtures, Part 2: De
• EN-934-2/A2 - Admixtures for Concrete, Mortar and Grout - Part 2: Concrete Admixtures - Definitions, R
• EN-934-3 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
• EN-934-4 - Part 4: Admixtures for Grout for Prestressing Tendons - Definitions, Requirements, Con
• EN-934-5 - Part 5: Admixtures for Sprayed Concrete - Definitions, Requirements, Conformity, Marki
• EN-934-6 - Part 6: Sampling, Conformity Control & Evaluation of Conformity, Admixtures for Concre
• JIS-A-1103 - Method of Test for Amount of Material Passing Test Sieve 75 Micrometer in Aggregates
• JIS-A-1118 - Method of test for air content of fresh concrete by volumetric method
• JIS-A-5002 - Lightweight aggregates for structural concrete
• JIS-A-5308 - Ready-mixed concrete
• JIS-A-5361 - Precast concrete products -- General rules for classification, designation and marking
• JIS-A-5362 - Precast concrete products -- Required performance and methods of verification
• JIS-A-5363 - Precast concrete products - General rules for methods of performance test
• JIS-A-5364 - Precast concrete products -- General rules of materials and product methods
• JIS-A-5365 - Precast concrete products -- General rules for method of inspection
• JIS-A-5371 - Precast unreinforced concrete products
• JIS-A-5372 - Precast reinforced concrete products
• JIS-A-5373 - Precast prestressed concrete products
• JIS-A-6202 - Expansive additive for concrete
• JIS-A-6204 - Chemical admixtures for concrete
• JIS-A-6205 - Corrosion inhibitor for reinforcing steel in concrete
• JIS-A-6206 - Ground granulated blast-furnace slag for concrete
• JIS-A-6207 - Silica fume for use in concrete
• JIS-A-6208 - Polymer short fibers for concrete and mortar (Foreign Standard)
• JIS-Q-1011 - Conformity Assessment - Conformity Assessment for Japanese Industrial Standards - Guidance on a Third-Party Certification System for Ready-Mixed Concrete Products
• JIS-Q-1011 JAPANESE - Japanese Language - Conformity Assessment - Conformity Assessment for Japanese Industrial Standards - Guidance on a Third-Party Certification System for Ready-Mixed Concrete Products
• JIS-Q-1012-AM1 - Conformity assessment - Conformity assessment for Japanese Industrial Standards - Guidance on a third-party certification system for precast concrete products (Amendment 1) (Foreign Standard)
• SIS-21110 - Concrete units. Marking of measuring points
• SIS-21111 - Concrete units. Measuring methods. Telescope instruments
• SIS-21112 - Concrete units. Determination of dimensions
• SIS-21113 - Concrete units. Determination of bearing deviations
• SIS-21114 - Concrete units. Determination of straightness and flatness deviations
• SIS-21115 - Concrete units. Measuring methods. Determination of reproducibility
• SIS-813405 - Balcony floors. Coordinating sizes
• SIS-813406 - Concrete balcony floor slabs. Work sizes and details
• SIS-CEN-17310 - Carbonation and CO2 uptake in concrete
• SIS-CEN/TR-14862 - Precast concrete products - Full-scale testing requirements in standards on precast concrete products
• SIS-CEN/TR-15677 - Fly ash obtained from co-combustion - A report on the situation in Europe
• SIS-CEN/TR-15678 - Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes
• SIS-CEN/TR-15728 - Design and use of inserts for lifting and handling of precast concrete elements
• SIS-CEN/TR-15739 - Precast concrete products - Concrete finishes - Identification
• SIS-CEN/TR-15840 - Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2
• SIS-CEN/TR-15868 - Survey on provisions valid in the place of use used in conjunction with the European concrete standard and developing practice
• SIS-CEN/TR-16142 - Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment
• SIS-CEN/TR-16349 - Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
• SIS-CEN/TR-16369 - Use of control charts in the production of concrete
• SIS-CEN/TR-16443 - Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete
• SIS-CEN/TR-16563 - Principles of the equivalent durability procedure
• SIS-CEN/TR-16639 - Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept
• SIS-CEN/TR-17172 - Validation testing program on chloride penetration and carbonation standardized test methods
• SIS-CEN/TS-12390-10 - Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete
• SIS-CEN/TS-12390-11 - Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
• SIS-CEN/TS-12390-9 - Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling
• SIS-CEN/TS-14038-2 - Electrochemical re-alkalization and chloride extraction treatments for reinforced concrete - Part 2: Chloride extraction
• SIS-CEN/TS-14754-1 - Curing compounds - Test methods - Part 1: Determination of water retension effiency of common curing compounds
• SIS-CR-13902 - Test methods for determining the water/cement ratio of fresh concrete
• SIS-ISO/TR-16475 - Guidelines for the repair of water-leakage cracks in concrete structures
• SMS-ISO-3285 - Road vehicles - Ignition coil fixing band
• SS-137003 - Concrete - Application of SS-EN 206:2013+A2:2021 in Sweden
• SS-137005 - Precast concrete products - Common rules - Application of EN 13369 in Sweden
• SS-137220 - Concrete testing - Hardened shotcrete - Compressive strength of shotcreted test specimens
• SS-137304 - Autoclaved aerated concrete - Quality classes
• SS-137306 - Autoclaved aerated concrete - Determination of moisture content
• SS-137308 - Autoclaved aerated concrete - Determination of bending strength
• SS-137309 - Autoclaved aerated concrete - Determination of modulus of elasticity at compression
• SS-812310 - Fibre Concrete - Design of Fibre Concrete Structures
• SS-812410 - Concrete products - Floor slabs - Dimensions
• SS-812501 - Autoclaved aerated concrete - Horizontal wall components
• SS-812502 - Autoclaved aerated concrete - Roof components
• SS-812503 - Autoclaved aerated concrete - Floor components
• SS-812504 - Autoclaved aerated concrete - Vertical wall components
• SS-EN-1015-11 - Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
• SS-EN-1168 - Precast concrete products - Hollow core slabs
• SS-EN-1169 - Precast concrete products - General rules for factory production control of glass-fibre reinforced cement
• SS-EN-1170-1 - Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix "Slump test" method
• SS-EN-1170-2 - Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test"
• SS-EN-1170-3 - Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of spayed GRC
• SS-EN-1170-4 - Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
• SS-EN-1170-5 - Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
• SS-EN-1170-6 - Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density
• SS-EN-1170-7 - Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisturecontent
• SS-EN-12004-2 - Adhesives for ceramic tiles - Part 2: Test methods
• SS-EN-12189 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time
• SS-EN-12190 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
• SS-EN-12269-1 - Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test
• SS-EN-12269-2 - Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test
• SS-EN-12350-1 - Testing fresh concrete - Part 1: Sampling and common apparatus
• SS-EN-12350-10 - Testing fresh concrete - Part 10: Self-compacting concrete - L box test
• SS-EN-12350-11 - Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
• SS-EN-12350-12 - Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test
• SS-EN-12350-2 - Testing fresh concrete - Part 2: Slump-test
• SS-EN-12350-3 - Testing fresh concrete - Part 3: Vebe test
• SS-EN-12350-4 - Testing fresh concrete - Part 4: Degree of compactability
• SS-EN-12350-5 - Testing fresh concrete - Part 5: Flow table test
• SS-EN-12350-6 - Testing fresh concrete - Part 6: Density
• SS-EN-12350-7 - Testing fresh concrete - Part 7: Air content - Pressure methods
• SS-EN-12350-8 - Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test
• SS-EN-12350-9 - Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test
• SS-EN-12390-1 - Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
• SS-EN-12390-10 - Testing hardened concrete - Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
• SS-EN-12390-11 - Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
• SS-EN-12390-12 - Testing hardened concrete - Part 12: Determination of the carbonation resistance of concrete - Accelerated carbonation method
• SS-EN-12390-13 - Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
• SS-EN-12390-14 - Testing hardened concrete - Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process
• SS-EN-12390-15 - Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process
• SS-EN-12390-16 - Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
• SS-EN-12390-17 - Testing hardened concrete - Part 17: Determination of creep of concrete in compression
• SS-EN-12390-18 - Testing hardened concrete - Part 18: Determination of the chloride migration coefficient
• SS-EN-12390-2 - Testing hardened concrete - Part 2: Making and curing specimens for strength tests
• SS-EN-12390-3 - Testing hardened concrete - Part 3: Compressive strength of test specimens
• SS-EN-12390-4 - Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
• SS-EN-12390-5 - Testing hardened concrete - Part 5: Flexural strength of test specimens
• SS-EN-12390-6 - Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
• SS-EN-12390-7 - Testing hardened concrete - Part 7: Density of hardened concrete
• SS-EN-12390-8 - Testing hardened concrete - Part 8: Depth of penetration of water under pressure
• SS-EN-12504-1 - Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
• SS-EN-12504-2 - Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
• SS-EN-12504-3 - Testing concrete in structures - Part 3: Determination of pull-out force
• SS-EN-12504-4 - Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity
• SS-EN-12602 - Prefabricated reinforced components of autoclaved aerated concrete
• SS-EN-12620 - Aggregates for concrete
• SS-EN-12636 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete
• SS-EN-12737 - Precast concrete products - Floor slats for livestock
• SS-EN-12794 - Precast concrete products - Foundation piles
• SS-EN-12839 - Precast concrete products - Elements for fences
• SS-EN-12843 - Precast concrete products - Masts and poles
• SS-EN-13198 - Precast concrete products - Street furniture and garden products
• SS-EN-13224 - Precast concrete products - Ribbed floor elements
• SS-EN-13225 - Precast concrete products - Linear structural elements
• SS-EN-1323 - Adhesives for tiles - Concrete slabs for tests
• SS-EN-13230-1 - Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
• SS-EN-13230-2 - Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers
• SS-EN-13230-3 - Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
• SS-EN-13230-4 - Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings
• SS-EN-13230-5 - Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements
• SS-EN-13230-6 - Railway applications - Track - Concrete sleepers and bearers - Part 6: Design
• SS-EN-1323-AM1 - Adhesives for tiles - Concrete slab for test
• SS-EN-13263-1 - Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
• SS-EN-13263-2 - Silica fume for concrete - Part 2: Conformity evaluation
• SS-EN-13369 - Common rules for precast concrete products
• SS-EN-13395-3 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete
• SS-EN-13395-4 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead
• SS-EN-1351 - Determination of flexural strength of autoclaved aerated concrete
• SS-EN-1352 - Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• SS-EN-1353 - Determination of moisture content of autoclaved aerated concrete
• SS-EN-1354 - Determination of compressive strength of lightweight aggregate concrete with open structure
• SS-EN-1355 - Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• SS-EN-1356 - Performance test for autoclaved aerated or lightweight aggregate concrete with open structure undertransverse load
• SS-EN-13577 - Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
• SS-EN-13581 - Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
• SS-EN-1367-1 - Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
• SS-EN-13693 - Precast concrete products - Special roof elements
• SS-EN-13747 - Precast concrete products - Floor plates for floor systems
• SS-EN-13748-1 - Terrazzo tiles - Part 1: Terrazzo tiles for internal use
• SS-EN-13748-1-AM1 - Terrazzo tiles - Part 1: Terrazzo tiles for internal use
• SS-EN-13748-2 - Terrazzo tiles - Part 2: Terrazzo tiles for external use
• SS-EN-13914-1 - Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
• SS-EN-13914-2 - Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering
• SS-EN-13978-1 - Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
• SS-EN-14038-2 - Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 2: Chloride extraction
• SS-EN-14068 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete
• SS-EN-14437 - Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method
• SS-EN-14474 - Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods
• SS-EN-14487-1 - Sprayed concrete - Part 1: Definitions, specifications and conformity
• SS-EN-14488-1 - Testing sprayed concrete - Part 1: Sampling fresh and hardened concrete
• SS-EN-14488-2 - Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
• SS-EN-14488-3 - Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
• SS-EN-14488-4 - Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
• SS-EN-14488-5 - Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
• SS-EN-14488-6 - Testing sprayed concrete - Part 6: Thickness of concrete on a substrate
• SS-EN-14488-7 - Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete
• SS-EN-14629 - Products and systems for the protection and repair of concrete stuctures -Test methods - Determination of chloride content in hardened concrete
• SS-EN-14630 - Products and systems for the protection and repair of concrete stuctures -Test methods - Determination of carbonation depth in hardened concrete by the phenolphtalein method
• SS-EN-14649 - Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST)
• SS-EN-14650 - Precast concrete products - General rules for factory production control of metallic fibre concrete
• SS-EN-14651 - Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual)
• SS-EN-14721 - Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
• SS-EN-14843 - Precast concrete products - Stairs
• SS-EN-14844 - Precast concrete products - Box culverts
• SS-EN-14845-1 - Test methods for fibres for concrete - Part 1: Reference concretes
• SS-EN-14845-2 - Test methods for fibres for concrete - Part 2: Effect on concrete
• SS-EN-14889-1 - Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
• SS-EN-14889-2 - Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
• SS-EN-14991 - Precast concrete products - Foundation elements
• SS-EN-14992 - Precast concrete products - Wall elements
• SS-EN-15037-1 - Precast concrete products - Beam-and-block floor systems - Part 1: Beams
• SS-EN-15037-2 - Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks
• SS-EN-15037-3 - Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
• SS-EN-15037-4 - Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
• SS-EN-15037-5 - Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork
• SS-EN-15050 - Precast concrete products - Bridge elements
• SS-EN-15191 - Precast concrete products - Classification of glassfibre reinforced concrete performances
• SS-EN-1520 - Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
• SS-EN-1521 - Determination of flexural strength of lightweightaggregate concrete with open structure
• SS-EN-15258 - Precast concrete products - Retaining wall elements
• SS-EN-15304 - Determination of the freeze-thaw resistance of autoclaved aerated concrete
• SS-EN-15361 - Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
• SS-EN-15422 - Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes
• SS-EN-15435 - Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance
• SS-EN-1544 - Products and systems for the protection and repair of concrete stuctures -Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars
• SS-EN-15498 - Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
• SS-EN-15564 - Precast concrete products - Resin bound concrete - Requirements and test methods
• SS-EN-16622 - Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
• SS-EN-16757 - Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements
• SS-EN-1737 - Determination of shear strength of welded joints of reinforced mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• SS-EN-1738 - Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
• SS-EN-1739 - Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• SS-EN-1740 - Performance test for prefabricated reinforced components made of autoclaved concrete or ligtweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
• SS-EN-1741 - Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweightaggregate concrete with open structure
• SS-EN-1742 - Determination of shear strength between differentlayers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• SS-EN-1766 - Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
• SS-EN-1857 - Chimneys - Components - Concrete flue liners
• SS-EN-1858 - Chimneys - Components - Concrete flue blocks
• SS-EN-1881 - Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method
• SS-EN-1916 - Concrete pipes and fittings, unreinforced, steel fibre and reinforced
• SS-EN-1917 - Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
• SS-EN-196-10 - Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement
• SS-EN-206 - Concrete - Specification, performance, production and conformity
• SS-EN-206-9 - Concrete - Part 9: Additional Rules for Self-compacting Concrete (SCC)
• SS-EN-445 - Grout for prestressing tendons - Test methods
• SS-EN-446 - Grout for prestressing tendons - Grouting procedures
• SS-EN-447 - Grout for prestressing tendons - Basic requirements
• SS-EN-450 - Fly ash for concrete - Definitions, requirements and quality control
• SS-EN-450-1 - Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
• SS-EN-450-2 - Fly ash for concrete - Part 2: Conformity evaluation
• SS-EN-451-1 - Method of testing fly ash - Part 1: Determination of free calcium oxide content
• SS-EN-451-2 - Method of testing fly ash - Part 2: Determination of fineness by wet sieving
• SS-EN-480-1 - Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
• SS-EN-480-10 - Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content
• SS-EN-480-11 - Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
• SS-EN-480-12 - Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures
• SS-EN-480-13 - Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
• SS-EN-480-14 - Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
• SS-EN-480-15 - Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
• SS-EN-480-2 - Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
• SS-EN-480-4 - Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete
• SS-EN-480-5 - Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption
• SS-EN-480-6 - Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
• SS-EN-480-8 - Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
• SS-EN-490 - Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
• SS-EN-490-AM1 - Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
• SS-EN-491 - Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
• SS-EN-54-20 - Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
• SS-EN-678 - Determination of the dry density of autoclaved aerated concrete
• SS-EN-679 - Determination of the compressive strength of autoclaved aerated concrete
• SS-EN-680 - Determination of the drying shrinkage of autoclaved aerated concrete
• SS-EN-771-1 - Specification for masonry units - Part 1: Clay masonry units
• SS-EN-771-1-AM1 - Specification for masonry units - Part 1: Clay masonry units
• SS-EN-771-2 - Specification for masonry units - Part 2: Calcium silicate masonry units
• SS-EN-771-2-AM1 - Specification for masonry units - Part 2: Calcium silicate masonry units
• SS-EN-771-3 - Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
• SS-EN-771-3-AM1 - Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
• SS-EN-771-4 - Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
• SS-EN-771-4-AM1 - Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
• SS-EN-771-5 - Specification for masonry units - Part 5: Manufactured stone masonry units
• SS-EN-771-5-AM1 - Specification for masonry units - Part 5: Manufactures stone masonry units
• SS-EN-771-6 - Specification for masonry units - Part 6: Natural stone masonry units
• SS-EN-772-10 - Methods of test for masonry units – Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units
• SS-EN-772-11 - Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
• SS-EN-772-11-AM1 - Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
• SS-EN-772-14 - Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units
• SS-EN-772-16 - Methods of test for masonry units - Part 16: Determination of dimensions
• SS-EN-772-16-AM1 - Methods of test for masonry units - Part 16: Determination of dimensions
• SS-EN-772-16-AM2 - Methods of test for masonry units - Part 16: Determination of dimensions
• SS-EN-772-2 - Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper identation)
• SS-EN-772-20 - Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units
• SS-EN-772-20-AM1 - Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units
• SS-EN-772-2-AM1 - Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
• SS-EN-772-4 - Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
• SS-EN-772-9 - Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
• SS-EN-772-9-AM1 - Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
• SS-EN-809 - Pumps and pump units for liquids - Common safety requirements
• SS-EN-934-1 - Admixtures for concrete, mortar and grout - Part 1: Common requirements
• SS-EN-934-2 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
• SS-EN-934-2-AM2 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
• SS-EN-934-3 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
• SS-EN-934-4 - Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
• SS-EN-934-5 - Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
• SS-EN-934-6 - Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance
• SS-EN-934-6-AM1 - Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
• SS-EN-989 - Determination of the bond behavior between reinforcing bars and autoclaved aerated concrete by the "Push-Out" test
• SS-EN-990 - Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
• SS-EN-991 - Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
• SS-EN-992 - Determination of the dry density of lightweight concrete with open structure
• SS-EN-ISO-10156 - Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
• SS-EN-ISO-11644 - Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements
• SS-EN-ISO-12947-3 - Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998)
• SS-EN-ISO-12947-4 - Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearence change (ISO 12947-4:1998)
• SS-EN-ISO-21809-2 - Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
• SS-EN-ISO-3175-3 - Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2017)
• SS-ENV-1170-8 - Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
• SS-ENV-206 - Concrete - Performance, production, placing and compliance criteria
• SS-ISO-10303-46 - Industrial automation systems and integration - Product data representation and exchange - Part 46: Integrated generic resource: Visual presentation (ISO 10303-46:2018, IDT)
• SS-ISO-10406-1 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 1: FRP bars and grids (ISO 10406-1:2015, IDT)
• SS-ISO-10406-2 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 2: FRP sheets (ISO 10406-2, IDT)
• SS-ISO-14484 - Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials (ISO 14484:2013, IDT)
• SS-ISO-1940-1 - Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances (ISO 1940-1:2003/Cor 1:2005, IDT)
• SS-ISO-7475 - Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station
• SS-ISO/IEC-15459-1 - Information technology - Automatic identification and data capture techniques - Unique identification - Part 1: Individual transport units (ISO/IEC 15459-1:2014, IDT)
• SS-ISO/IEC-25051 - Software engineering - Software product Quality Requirements and Evaluation (SQuarRE) - Requirements for quality of Commercial Off-The-Self (COTS) software product and instructions for testing (ISO/IEC 25051:2006/Cor 1:2007, IDT)
• UNE-127757 - VEnvironmental product declarations - Product Category Rules for precast concrete products
• UNE-83160-1 - Determination of concrete strength at early-ages, Part 1: Applicable methods