Document Center List of Standards on Ceramic Tiles
ICS Code 91.100.23
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C126 - Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
- ASTM-C1378 - Standard Test Method for Determination of Resistance to Staining
BSI:
- BS-1281 - Specification for glazed ceramic tiles and tile fittings for internal walls
- BS-1286 - Specification for clay tiles for flooring
- BS-6431-12 - Ceramic floor and wall tiles. Method for determination of modulus of rupture
- BS-6431-16 - Ceramic floor and wall tiles. Method for determination of resistance to thermal shock
- BS-6431-19 - Ceramic floor and wall tiles. Method for determination of chemical resistance. Glazed tiles
- BS-EN-14411 - Ceramic tiles. Definition, classification, characteristics, assessment and verification of constancy of performance and marking
- BS-EN-14411-TC - Tracked Changes. Ceramic tiles. Definition, classification, characteristics, assessment and verification of constancy of performance and marking
- BS-EN-17160 - Product category rules for ceramic tiles
- BS-EN-ISO-10545-1 - Ceramic tiles
- BS-EN-ISO-10545-10 - Ceramic tiles
- BS-EN-ISO-10545-10-TC - Tracked Changes. Ceramic tiles
- BS-EN-ISO-10545-12 - Ceramic tiles
- BS-EN-ISO-10545-13 - Ceramic tiles
- BS-EN-ISO-10545-14 - Ceramic tiles
- BS-EN-ISO-10545-14-TC - Tracked Changes. Ceramic tiles
- BS-EN-ISO-10545-15 - Ceramic tiles
- BS-EN-ISO-10545-18 - Ceramic tiles
- BS-EN-ISO-10545-2 - Ceramic tiles
- BS-EN-ISO-10545-20 - Ceramic tiles
- BS-EN-ISO-10545-2-TC - Tracked Changes. Ceramic tiles
- BS-EN-ISO-10545-3 - Ceramic tiles
- BS-EN-ISO-10545-3-TC - Tracked Changes. Ceramic tiles
- BS-EN-ISO-10545-4 - Ceramic tiles
- BS-EN-ISO-10545-6 - Ceramic tiles
- BS-EN-ISO-10545-8 - Ceramic tiles
- BS-EN-ISO-10545-9 - Ceramic tiles
- BS-ISO-13006 - Ceramic tiles. Definitions, classification, characteristics and marking
- BS-ISO-13007-2 - Ceramic tiles. Grouts and adhesives
- BS-ISO-13007-4 - Ceramic tiles. Grouts and adhesives
- BS-ISO-13007-5 - Ceramic tiles. Grouts and adhesives
- BS-ISO-13007-6 - Ceramic tiles. Grouts and adhesives
- BS-ISO-14448 - Low modulus adhesives for exterior tile finishing
- BS-ISO-17721-1 - Quantitative determination of antibacterial activity of ceramic tile surfaces. Test methods
- BS-ISO-17721-2 - Quantitative determination of antibacterial activity of ceramic tile surfaces. Test methods
- BS-ISO-17889-1 - Ceramic tiling systems. Sustainability for ceramic tiles and installation materials
- BS-ISO-17889-2 - Ceramic tiling systems. Sustainability for ceramic tiles and installation materials
- PD-ISO-17870-1 - Ceramic tiles. Guidelines for installation
- PD-ISO-17870-2 - Ceramic tiles. Guidelines for installation
ISO:
- ISO-10545-1 - Ceramic tiles - Part 1: Sampling and basis for acceptance
- ISO-10545-10 - Ceramic tiles - Part 10: Determination of moisture expansion
- ISO-10545-11 - Ceramic tiles -- Part 11: Determination of crazing resistance for glazed tiles
- ISO-10545-12 - Ceramic tiles -- Part 12: Determination of frost resistance
- ISO-10545-13 - Ceramic tiles - Part 13: Determination of chemical resistance
- ISO-10545-14 - Ceramic tiles - Part 14: Determination of resistance to stains
- ISO-10545-15 - Ceramic tiles - Part 15: Determination of lead and cadmium given off by tiles
- ISO-10545-16 - Ceramic tiles - Part 16: Determination of small colour differences
- ISO-10545-18 - Ceramic tiles - Part 18: Determination of light reflectance value (LRV)
- ISO-10545-2 - Ceramic tiles - Part 2: Determination of dimensions and surface quality
- ISO-10545-20 - Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature
- ISO-10545-3 - Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
- ISO-10545-4 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength
- ISO-10545-5 - Ceramic tiles -- Part 5: Determination of impact resistance by measurement of coefficient of restitution
- ISO-10545-6 - Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles
- ISO-10545-7 - Ceramic tiles -- Part 7: Determination of resistance to surface abrasion for glazed tiles
- ISO-10545-8 - Ceramic tiles - Part 8: Determination of linear thermal expansion
- ISO-10545-9 - Ceramic tiles - Part 9: Determination of resistance to thermal shock
- ISO-13006 - Ceramic tiles - Definitions, classification, characteristics and marking
- ISO-13007-1 - Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and specifications for adhesives
- ISO-13007-2 - Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives
- ISO-13007-3 - Ceramic tiles - Grouts and adhesives - Part 3: Terms, definitions and specifications for grouts
- ISO-13007-4 - Ceramic tiles - Grouts and adhesives - Part 4: Test methods for grouts
- ISO-13007-5 - Ceramic tiles - Grouts and adhesives - Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
- ISO-13007-6 - Ceramic tiles - Grouts and adhesives - Part 6: Requirements, test methods, evaluation of conformity, classification and designation for waterproof membranes used with the installation of ceramic tiles
- ISO-14448 - Low modulus adhesives for exterior tile finishing
- ISO-17721-2 - Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods - Part 1: Ceramic tile surfaces with incorporated antibacterial agents
- ISO-17870-1 - Ceramic tiles - Guidelines for installation - Part 1: Installation of ceramic wall and floor tiles
- ISO-17870-2 - Ceramic tiles - Guidelines for installation - Part 2: Installation of thin ceramic wall and floor tiles and panels
- ISO-17870-3 - Ceramic tiles - Installation - Part 3: Installation of large format porcelain tiles and panels by mechanical means onto a supporting structure
- ISO-17889-1 - Ceramic tiling systems - Sustainability for ceramic tiles and installation materials - Part 1: Specification for ceramic tiles
- ISO-17889-2 - Ceramic tiling systems - Sustainability for ceramic tiles and installation materials - Part 2: Specification for tile installation materials
Other SDOs:
- EN-14411 - Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking
- EN-14891 - Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
- EN-17160 - Product category rules for ceramic tiles
- EN-ISO-10545-1 - Ceramic tiles - Part 1: Sampling and basis for acceptance
- EN-ISO-10545-10 - Ceramic Tiles, Determination of Moisture Expansion
- EN-ISO-10545-12 - Ceramic Tiles, Determination of Frost Resistance
- EN-ISO-10545-13 - Ceramic tiles - Part 13: Determination of chemical resistance
- EN-ISO-10545-14 - Ceramic tiles - Part 14: Determination of resistance to stains
- EN-ISO-10545-15 - Ceramic Tiles, Determination of Lead & Cadmium Given Off by Glazed Tiles
- EN-ISO-10545-16 - Ceramic tiles - Part 16: Determination of small colour differences
- EN-ISO-10545-2 - Part 2: Determination of Dimensions & Surface Quality, Ceramic Tiles
- EN-ISO-10545-3 - Ceramic Tiles, Determination of Water Absorption, Apparent Porosity, Apparent Relative
- EN-ISO-10545-4 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)
- EN-ISO-10545-6 - Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tile
- EN-ISO-10545-8 - Ceramic tiles - Part 8: Determination of linear thermal expansion
- EN-ISO-10545-9 - Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:2013)
- SS-105100 - Ceramic tiles - Determination of inverse colour fastness
- SS-EN-14411 - Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking
- SS-EN-14891 - Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- SS-EN-17160 - Product category rules for ceramic tiles
- SS-EN-ISO-10545-1 - Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014)
- SS-EN-ISO-10545-10 - Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:2021)
- SS-EN-ISO-10545-13 - Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:2016)
- SS-EN-ISO-10545-14 - Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:2015)
- SS-EN-ISO-10545-15 - Ceramic tiles - Part 15: Determination of lead and cadmium given off by tiles (ISO 10545-15:2021)
- SS-EN-ISO-10545-16 - Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010)
- SS-EN-ISO-10545-18 - Ceramic tiles - Part 18: Determination of Light Reflectance Value (LRV) (ISO 10545-18:2022)
- SS-EN-ISO-10545-2 - Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:2018)
- SS-EN-ISO-10545-20 - Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature (ISO 10545-20:2022)
- SS-EN-ISO-10545-3 - Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)
- SS-EN-ISO-10545-4 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
- SS-EN-ISO-10545-6 - Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010)
- SS-EN-ISO-10545-8 - Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:2014)
- SS-EN-ISO-10545-9 - Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:2013)
- SS-ISO-17721-1 - Quantitative determination of antibacterial activity of ceramic tile surfaces Test methods Part 1: Ceramic tile surfaces with incorporated antibacterial agents (ISO 17721-1:2021, IDT)
- SS-ISO-17721-2 - Quantitative determination of antibacterial activity of ceramic tile surfaces Test methods Part 2: Ceramic tile surfaces with incorporated photocatalytic antibacterial agents (ISO 17721-2:2021, IDT)
- SS-ISO-17889-1 - Ceramic tiling systems Sustainability for ceramic tiles and installation materials Part 1: Specification for ceramic tiles (ISO 17889-1:2021, IDT)