Document Center List of Standards on Timber Structures
ICS Code 91.080.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1060 - Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
- ASTM-D3957 - Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
- ASTM-D5933 - Standard Specification for 2
5 8 - ASTM-D6555 - Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
- ASTM-D7469 - Standard Test Methods for End Joints in Structural Wood Products
- ASTM-D7470 - Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
- ASTM-D7672 - Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
- ASTM-E2969 - Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction
BSI:
- BIP-2198 - Concise Eurocode for design of timber structures. BS EN 1995: Eurocodes 5
- BS-1204-1 - Synthetic resin adhesives (phenolic and aminoplastic) for wood. Specification for gap-filling adhesives
- BS-1204-2 - Synthetic resin adhesives (phenolic and aminoplastic) for wood. Specification for close-contact adhesives
- BS-5268-2 - Structural Use of Timber, Code of Practice for Permissible Stress Design, Materials &
- BS-5268-3 - Structural use of timber. Code of practice for trussed rafter roofs
- BS-5268-4.2 - Structural Use of Timber, Fire Resistance of Timber Structures, Recommended for Calcul
- BS-5268-5 - Structural Use of Timber, Code of Practice for the Preservative Treatment of Structura
- BS-5268-6.1 - Section 6.1: Dwellings Not Exceeding Seven Storeys, Part 6: Code of Practice for Timb
- BS-5268-6.2 - Code of Practice for Timber Frame Walls. Buildings Other Than Dwellings Not Exceeding
- BS-5820 - Methods of test for determination of certain physical and mechanical properties of timber in structural sizes
- BS-6446 - Specification for manufacture of glued structural components of timber and wood based panels
- BS-EN-1059 - Timber structures. Product requirements for prefabricated trusses using punched metal plate fasteners
- BS-EN-1075 - Timber structures. Test methods. Joints made with punched metal plate fasteners
- BS-EN-1075-TC - Tracked Changes. Timber structures. Test methods. Joints made with punched metal plate fasteners
- BS-EN-1194 - Timber structures. Glued laminated timber. Strength classes and determination of characteristic values
- BS-EN-12512 - Timber structures. Test methods. Cyclic testing of joints made with mechanical fasteners
- BS-EN-13271 - Timber fasteners. Characteristic load-carrying capacities and slip-moduli for connector joints
- BS-EN-13377 - Prefabricated timber formwork beams. Requirements, classification and assessment
- BS-EN-13381-7 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-1380 - Timber structures. Test methods. Load bearing nails, screws, dowels and bolts
- BS-EN-1381 - Timber structures. Test methods. Load bearing stapled joints
- BS-EN-1381-TC - Tracked Changes. Timber structures. Test methods. Load bearing stapled joints
- BS-EN-1382 - Timber Structures. Test methods. Withdrawal capacity of timber fasteners
- BS-EN-1382-TC - Tracked Changes. Timber Structures. Test methods. Withdrawal capacity of timber fasteners
- BS-EN-1383 - Timber structures. Test methods. Pull through resistance of timber fasteners
- BS-EN-1383-TC - Tracked Changes. Timber structures. Test methods. Pull through resistance of timber fasteners
- BS-EN-14250 - Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
- BS-EN-14251 - Structural round timber. Test methods
- BS-EN-14358 - Timber structures. Calculation and verification of characteristic values
- BS-EN-14358-TC - Tracked Changes. Timber structures. Calculation and verification of characteristic values
- BS-EN-14374 - Timber structures. Structural laminated veneer lumber. Requirements
- BS-EN-14545 - Timber structures. Connectors. Requirements
- BS-EN-14592 - Timber structures. Dowel-type fasteners. Requirements
- BS-EN-15736 - Timber structures. Test methods. Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses
- BS-EN-15737 - Timber structures. Test methods. Torsional resistance of driving in screws
- BS-EN-16485 - Round and sawn timber. Environmental Product Declarations. Product category rules for wood and wood-based products for use in construction
- BS-EN-16784 - Timber structures. Test methods. Determination of the long term behaviour of coated and uncoated dowel-type fasteners
- BS-EN-16929 - Test methods. Timber floors. Determination of vibration properties
- BS-EN-17121 - Conservation of cultural heritage. Historic timber structures. Guidelines for the on-site assessment of load-bearing timber structures
- BS-EN-1995-1-1 - Eurocode 5: Design of timber structures
- BS-EN-1995-1-1(NA) - UK National Annex to Eurocode 5: Design of timber structures
- BS-EN-1995-1-2 - Eurocode 5. Design of timber structures
- BS-EN-1995-1-2(NA) - UK National Annex to Eurocode 5. Design of timber structures
- BS-EN-1995-2 - Eurocode 5. Design of timber structures
- BS-EN-1995-2(NA) - UK National Annex to Eurocode 5. Design of timber structures
- BS-EN-301 - Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
- BS-EN-301-TC - Tracked Changes. Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
- BS-EN-383 - Timber structures. Test methods. Determination of embedment strength and foundation values for dowel type fasteners
- BS-EN-385 - Finger jointed structural timber. Performance requirements and minimum production requirements
- BS-EN-408 - Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
- BS-EN-594 - Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
- BS-EN-912 - Timber fasteners. Specifications for connectors for timbers
- BS-EN-ISO-8970 - Timber structures. Testing of joints made with mechanical fasteners. Requirements for timber density
- BS-EN-ISO-8970-TC - Tracked Changes. Timber structures. Testing of joints made with mechanical fasteners. Requirements for timber density
- BS-ISO-16696-1 - Timber structures. Cross laminated timber
- BS-ISO-19624 - Bamboo structures. Grading of bamboo culms. Basic principles and procedures
- BS-ISO-19993 - Timber structures. Glued laminated timber. Face and edge joint cleavage test
- BS-ISO-22389-2 - Timber structures. Bending applications of I-beams
- BS-ISO-22390 - Timber structures. Laminated veneer lumber. Structural properties
- BS-ISO-23478 - Bamboo structures. Engineered bamboo products. Test methods for determination of physical and mechanical properties
- BS-ISO-24322 - Timber structures. Methods of test for evaluation of long-term performance
- BS-ISO-24323 - Timber structures. Design method for vibrational serviceability of timber floors
- BS-ISO-5257 - Bamboo structures. Engineered bamboo products. Test methods for determination of mechanical properties using small size specimens
- DD-ENV-1995-1-1 - Eurocode 5. Design of timber structures. General rules and rules for buildings (together with United Kingdom National Application Document)
- DD-ENV-1995-1-2 - Eurocode 5. Design of timber structures
- DD-ENV-302-5 - Adhesives for load-bearing timber structures. Test tethods
- KIT-209 - Design of Timber Structures
- PD-6693-1 - Recommendations for the design of timber structures to Eurocode 5: Design of timber structures
- PD-ISO-21141 - Timber structures. Timber connections and assemblies. Determination of yield and ultimate characteristics and ductility from test data
ISO:
- ISO-10983 - Timber - Finger joints - Minimum production requirements and testing methods
- ISO-10984-1 - Timber structures - Dowel-type fasteners - Part 1: Determination of yield moment
- ISO-10984-2 - Timber structures - Dowel-type fasteners - Part 2: Determination of embedding strength
- ISO-12122-1 - Timber structures - Determination of characteristic values - Part 1: Basic requirements
- ISO-12122-2 - Timber structures - Determination of characteristic values - Part 2: Sawn timber
- ISO-12122-3 - Timber structures - Determination of characteristic values - Part 3: Glued laminated timber
- ISO-12122-4 - Timber structures - Determination of characteristic values - Part 4: Engineered wood products
- ISO-12122-5 - Timber structures - Determination of characteristic values - Part 5: Mechanical connections
- ISO-12122-6 - Timber structures - Determination of characteristic values - Part 6: Large components and assemblies
- ISO-12578 - Timber structures - Glued laminated timber - Component performance requirements
- ISO-12579 - Timber structures - Glued laminated timber - Method of test for shear strength of glue lines
- ISO-12580 - Timber structures - Glued laminated timber - Methods of test for glue-line delamination
- ISO-12910 - Light-frame timber construction - Comparison of four national design documents
- ISO-13910 - Timber structures - Strength graded timber - Test methods for structural properties
- ISO-15206 - Timber poles - Basic requirements and test methods
- ISO-16507 - Timber structures - Uniform, concentrated static and concentrated impact loads on wood-based roof and floor panel assemblies - Test methods
- ISO-16572 - Timber structures - Wood-based panels - Test methods for structural properties
- ISO-16598 - Timber structures - Structural classification for sawn timber
- ISO-16670 - Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method
- ISO-16696-1 - Timber structures - Cross laminated timber - Part 1: Component performance, production requirements and certification scheme
- ISO-17754 - Timber structures - Test methods - Torsional resistance of driving in screws
- ISO-18100 - Timber structures - Finger-jointed timber - Manufacturing and production requirements
- ISO-18267 - Timber structures - Review of design standards
- ISO-18324 - Timber structures - Test methods - Floor vibration performance
- ISO-18402 - Timber structures - Structural insulated panel roof construction - Test methods
- ISO-19049 - Timber structures - Test method - Static load tests for horizontal diaphragms including floors and roofs
- ISO-19323 - Timber structures - Joist hangers - Test methods
- ISO-19623 - Timber structures - Glued laminated timber - Assignment of glued laminated timber characteristic values from laminate properties
- ISO-19624 - Bamboo structures - Grading of bamboo culms - Basic principles and procedures
- ISO-19993 - Timber structures - Glued laminated timber - Face and edge joint cleavage test
- ISO-20152-1 - Timber structures - Bond performance of adhesives - Part 1: Basic requirements
- ISO-20152-2 - Timber structures - Bond performance of adhesives - Part 2: Additional requirements
- ISO-20152-3 - Timber structures - Bond performance of adhesives - Part 3: Use of alternative species for bond tests
- ISO-21136 - Timber structures - Vibration performance criteria for timber floors
- ISO-21141 - Timber structures - Timber connections and assemblies - Determination of yield and ultimate characteristics and ductility from test data
- ISO-21581 - Timber structures - Static and cyclic lateral load test methods for shear walls
- ISO-22156 - Bamboo structures - Bamboo culms - Structural design
- ISO-22389-1 - Timber structures - Bending strength of I-beams - Part 1: Testing, evaluation and characterization
- ISO-22389-2 - Timber structures - Bending applications of I-beams - Part 2: Component performance and manufacturing requirements
- ISO-22390 - Timber structures - Laminated veneer lumber - Structural properties
- ISO-22452 - Timber structures - Structural insulated panel walls - Test methods
- ISO-23478 - Bamboo structures - Engineered bamboo products - Test methods for determination of physical and mechanical properties
- ISO-24322 - Timber structures - Methods of test for evaluation of long-term performance - Part 1: Wood-based products in bending
- ISO-24323 - Timber structures - Design method for vibrational serviceability of timber floors
- ISO-5257 - Bamboo structures - Engineered bamboo products - Test methods for determination of mechanical properties using small size specimens
- ISO-6891 - Timber structures -- Joints made with mechanical fasteners -- General principles for the determination of strength and deformation characteristics
- ISO-8375 - Timber structures - Glued laminated timber - Test methods for determination of physical and mechanical properties
- ISO-8969 - Timber structures - Testing of punched metal plate fasteners and joints
- ISO-8970 - Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density
- ISO-9087 - Wood - Determination of nail and screw holding power under axial load application
Other SDOs:
- DIN-EN-12512 - Timber Structures - Test Methods - Cycllic Testing of Joints Made With Mechanical Fast
- DIN-EN-13986 - Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking; German version EN 13986:2004+A1:2015
- DIN-EN-14250 - Timber Structures - Product Requirements for Prefabricated Structural Members Assemble
- DIN-EN-14358 - Timber structures - Calculation and verification of characteristic values; German version EN 14358:2016
- DIN-EN-14374 - Timber Structures, Structural Laminated Veneer Lumber, Requirements
- DIN-EN-1995-1-2 - Part 1-2: General - Structural Fire Design, Eurocode 5: Design of Timber Structures
- DIN-EN-1995-2 - Part 2: Bridges, Eurocode 5: Design of Timber Structures
- DIN-EN-383 - Timber Structures - Test Methods - Determination of Embedment Strength & Foundation V
- EN-1075 - Timber structures - Test methods - Joints made with punched metal plate fasteners
- EN-1194 - Timber Structures, Glued Laminated Timber, Strength Classes & Determination of Charac
- EN-12512 - Timber Structures - Test Methods, Cyclic Testing of Joints Made With Mechanical Fasten
- EN-13381-7 - Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
- EN-1380 - Timber Structures - Test Methods - Load Bearing Nails, Screws, Dowels & Bolts
- EN-1381 - Timber structures - Test methods - Load bearing stapled joints
- EN-1382 - Timber Structures - Test methods - Withdrawal capacity of timber fasteners
- EN-1383 - Timber structures - Test methods - Pull through resistance of timber fasteners
- EN-14081-4 - Part 4: Machine Grading - Grading Machine Settings for Machine Controlled Systems, Tim
- EN-14250 - Timber Structures - Product Requirements for Prefabricated Structural Members Assemble
- EN-14251 - Structural Round Timber, Test Methods
- EN-14358 - Timber structures - Calculation and verification of characteristic values
- EN-14374 - Timber Structures, Structural Laminated Veneer Lumber, Requirements
- EN-14545 - Timber Structures, Connectors, Requirements
- EN-14592 - Timber structures - Dowel-type fasteners - Requirements
- EN-15736 - Timber Structures - Test Methods - Withdrawl Capacity of Punched Metal Plate Fasteners
- EN-15737 - Timber Structures - Test Methods - Torsional Resistance of Driving in Screws
- EN-16485 - Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction
- EN-16784 - Timber structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
- EN-16929 - Test methods - Timber floors - Determination of vibration properties
- EN-1995-1-1/A2 - Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
- EN-1995-1-1(NA) - Uk National Annex To Eurocode 5, Design of Timber Structures, General, Common Rules &
- EN-1995-1-2 - Part 1-2: General - Structural Fire Design, Eurocode 5: Design of Timber Structures
- EN-1995-1-2(NA) - Uk National Annex To Eurocode 5, Design of Timber Structures, General, Structural Fire
- EN-1995-2 - Part 2: Bridges, Eurocode 5: Design of Timber Structures
- EN-1995-2(NA) - Uk National Annex To Eurocode 5, Design of Timber Structures, Bridges
- EN-383 - Timber Structures - Test Methods - Determination of Embedment Strength & Foundation Va
- EN-385 - Finger-Jointed Structural Timber, Performance Requirements & Minimum Production Requir
- EN-408 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
- EN-594 - Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
- EN-912 - Timber fasteners - Specifications for connectors for timbers
- EN-ISO-8970 - Timber Structures - Testing of Joints Made With Mechanical Fasteners - Requirements Fo
- SS-EN-1058 - Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
- SS-EN-1059 - Timber structures - Product requirements for prefabricated trusses using punched metal plate fasteners
- SS-EN-1075 - Timber structures - Test methods - Joints made with punched metal plate fasteners
- SS-EN-1193 - Timber structures - Structural timber and glued laminated timber - Determination of shear strength and mechanical properties perpendicular to grain
- SS-EN-1195 - Timber structures - Test methods - Performance ofstructural floor decking
- SS-EN-12369-3 - Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
- SS-EN-12512 - Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
- SS-EN-12512-AM1 - Timber Structures - Test methods - Cyclic testing of joints made with mechanical fasteners
- SS-EN-13271 - Timber fasteners - Characteristic load-carrying capacities and sip-moduli for connector joints
- SS-EN-13381-7 - Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
- SS-EN-1380 - Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
- SS-EN-1381 - Timber structures - Test methods - Load bearing stapled joints
- SS-EN-1382 - Timber Structures - Test methods - Withdrawal capacity of timber fasteners
- SS-EN-1383 - Timber structures - Test methods - Pull through resistance of timber fasteners
- SS-EN-13986 - Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
- SS-EN-14043 - High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
- SS-EN-14080 - Timber structures - Glued laminated timber and glued solid timber - Requirements
- SS-EN-14081-1 - Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
- SS-EN-14081-2 - Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for type testing
- SS-EN-14081-3 - Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control
- SS-EN-14081-4 - Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems
- SS-EN-14229 - Structural timber - Wood poles for overhead lines
- SS-EN-14250 - Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
- SS-EN-14251 - Structural round timber - Test methods
- SS-EN-14358 - Timber structures - Calculation and verification of characteristic values
- SS-EN-14374 - Timber structures - Structural laminated veneer lumber - Requirements
- SS-EN-14545 - Timber structures - Connectors - Requirements
- SS-EN-14592 - Timber structures - Dowel-type fasteners - Requirements
- SS-EN-15497 - Structural finger jointed solid timber - Performance requirements and minimum production requirements
- SS-EN-15736 - Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses
- SS-EN-15737 - Timber Structures - Test methods - Torsional resistance of driving in screws
- SS-EN-16351 - Timber structures - Cross laminated timber - Requirements
- SS-EN-16485 - Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction
- SS-EN-16784 - Timber structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
- SS-EN-16929 - Test methods - Timber floors - Determination of vibration properties
- SS-EN-17121 - Conservation of cultural heritage - Historic timber structures - Guidelines for the on-site assessment of load-bearing timber structures
- SS-EN-1993-1-11 - Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components
- SS-EN-1993-1-3 - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
- SS-EN-1993-1-5 - Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
- SS-EN-1995-1-1 - Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
- SS-EN-1995-1-1-AM1 - Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
- SS-EN-1995-1-1-AM2 - Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
- SS-EN-1995-1-2 - Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
- SS-EN-1995-2 - Eurocode 5: Design of timber structures - Part 2: Bridges
- SS-EN-26891 - Träkonstruktioner - Mekaniska förband - Bestämning av hållfasthet och deformation
- SS-EN-28970 - Ergonomics - Determination of metabolic heat production (ISO 8996:1990)
- SS-EN-338 - Structural timber - Strength classes
- SS-EN-380 - Timber structures - Test methods - General principles for static load testing
- SS-EN-383 - Timber structures - Test methods - Determination of embedding strength and foundation values for dowel type fasteners
- SS-EN-384 - Structural timber - Determination of characteristic values of mechanical properties and density
- SS-EN-385 - Finger jointed structural timber - Performance requirements and minimum production requirements
- SS-EN-386 - Glued laminated timber - Performance requirements and minimum production requirements
- SS-EN-391 - Glued laminated timber - Delamination test of glue lines
- SS-EN-408 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
- SS-EN-409 - Timber structures - Test methods - Determination of the yield moment of dowel type fasteners
- SS-EN-594 - Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
- SS-EN-595 - Timber structures - Test methods - Test of trusses for the determination of strength and deformation behavior
- SS-EN-596 - Timber structures - Test methods - Soft body impact test of timber framed walls
- SS-EN-912 - Timber fasteners - Specifications for connectors for timbers
- SS-EN-ISO-8970 - Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010)
- SS-ENV-1995-1-1 - Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
- SS-ENV-1995-1-2 - Eurocode 5: Design of timber structures - Part 1-2: General rules - Structural fire design
- SS-ENV-1995-2 - Eurocode 5: Design of timber structures - Part 2: Bridges
- SS-ISO-10303-45 - Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource: Material and other engineering properties (ISO 10303-45:2018, IDT)
- SS-ISO-12122-3 - Timber structures - Determination of characteristic values - Part 3: Glued laminated timber (ISO 12122-3:2016, IDT)
- SS-ISO-12122-4 - Timber structures - Determination of characteristic values - Part 4: Engineered wood products (ISO 12122-4:2017, IDT)
- SS-ISO-18324 - Timber structures - Test methods - Floor vibration performance (ISO 18324:2016, IDT)