Document Center List of Standards on Binders
ICS Code 87.060.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1063 - Test Method for Ash in Rosin (Withdrawn 1991)
- ASTM-D1064 - Standard Test Methods for Iron in Rosin Tall Oil Fatty Acids and Other Related Products (Withdrawn 2002)
- ASTM-D1065 - Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products
- ASTM-D1131 - Standard Test Methods of Testing Rosin Oils (Withdrawn 2003)
- ASTM-D12 - Standard Specification for Raw Tung Oil (Withdrawn 2007)
- ASTM-D1210 - Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
- ASTM-D124 - Standard Specification for Degummed Soybean Oil (Withdrawn 2007)
- ASTM-D1358 - Standard Test Method for Spectrophotometric Diene Value of Dehydrated Castor Oil and Its Derivatives (Withdrawn 2003)
- ASTM-D1397 - Standard Test Method for Unsaponifiable Matter in Alkyd Resins and Resin Solutions (Withdrawn 2007)
- ASTM-D1398 - Standard Test Method for Fatty Acid Content of Alkyd Resins and Alkyd Resin Solutions (Withdrawn 2007)
- ASTM-D1462 - Standard Specification for Refined Soybean Oil (Withdrawn 2007)
- ASTM-D1466 - Standard Test Method for Sampling Liquid Oils and Fatty Acids Commonly Used in Paints, Varnishes, and Related Materials (Withdrawn 2003)
- ASTM-D1467 - Standard Guide for Testing Fatty Acids Used in Protective Coatings (Withdrawn 2003)
- ASTM-D1469 - Standard Test Method for Total Rosin Acids Content of Coating Vehicles (Withdrawn 2003)
- ASTM-D1538 - Standard Specification for Distilled Linseed Fatty Acids (Withdrawn 2007)
- ASTM-D1539 - Standard Specification for Dehydrated Castor Acids (Withdrawn 2007)
- ASTM-D1541 - Standard Test Method for Total Iodine Value of Drying Oils and Their Derivatives (Withdrawn 2006)
- ASTM-D1542 - Test Method for Qualitative Detection of Rosin in Varnishes (Withdrawn 1997)
- ASTM-D1585 - Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
- ASTM-D1725 - Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method
- ASTM-D1849 - Standard Test Method for Package Stability of Paint
- ASTM-D1950 - Standard Test Method for Acetone Tolerance of Heat-Bodied Drying Oils (Withdrawn 2003)
- ASTM-D1951 - Standard Test Method for Ash in Drying Oils and Fatty Acids (Withdrawn 2003)
- ASTM-D1952 - Standard Test Method for Quantitative Determination of Break in Drying Oils (Withdrawn 2003)
- ASTM-D1954 - Standard Test Method for Foots in Raw Linseed Oil (Volumetric Method) (Withdrawn 2003)
- ASTM-D1955 - Standard Test Method for Gel Time of Drying Oils (Withdrawn 2003)
- ASTM-D1957 - Hydroxyl Value of Fatty Oils and Acids
- ASTM-D1958 - Standard Test Method for Chloroform Insoluble Matter in Oiticica Oil (Withdrawn 2003)
- ASTM-D1959 - Standard Test Method for Iodine Value of Drying Oils and Fatty Acids (Withdrawn 2006)
- ASTM-D1960 - Standard Test Method for Loss on Heating of Drying Oils (Withdrawn 2003)
- ASTM-D1962 - Standard Test Method for Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids (Withdrawn 2004)
- ASTM-D1963 - Standard Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C (Withdrawn 2004)
- ASTM-D1964 - Standard Test Method for Tung Oil Quality (Withdrawn 2003)
- ASTM-D1965 - Standard Test Method for Unsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized Fatty Acids (Withdrawn 2007)
- ASTM-D1967 - Standard Test Method for Measuring Color After Heating of Drying Oils (Withdrawn 2003)
- ASTM-D1980 - Standard Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids (Withdrawn 2007)
- ASTM-D1981 - Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
- ASTM-D1982 - Standard Test Method for Titer of Fatty Acids
- ASTM-D1983 - Standard Test Method for Fatty Acid Composition by Gas-Liquid Chromatography of Methyl Esters (Withdrawn 2003)
- ASTM-D234 - Standard Specification for Raw Linseed Oil (Withdrawn 2007)
- ASTM-D2354 - Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
- ASTM-D2372 - Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
- ASTM-D260 - Standard Specification for Boiled Linseed Oil (Withdrawn 2007)
- ASTM-D2621 - Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
- ASTM-D2689 - Standard Practices for Testing Alkyd Resins (Withdrawn 2008)
- ASTM-D269 - Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
- ASTM-D2690 - Standard Test Method for Isophthalic Acid in Alkyd and Polyester Resins (Withdrawn 2007)
- ASTM-D2743 - Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography (Withdrawn 2015)
- ASTM-D29 - Standard Test Methods for Sampling and Testing Lac Resins (Withdrawn 2005)
- ASTM-D3725 - Standard Test Method for Semiquantitative Determination of Fish Oil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid Chromatography (Withdrawn 2007)
- ASTM-D4143 - Standard Guide for Testing Latex Vehicles
- ASTM-D4209 - Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes
- ASTM-D464 - Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products
- ASTM-D465 - Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
- ASTM-D5062 - Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
- ASTM-D509 - Standard Test Methods of Sampling and Grading Rosin
- ASTM-D555 - Standard Guide for Testing Drying Oils (Withdrawn 2007)
- ASTM-D563 - Standard Test Method for Phthalic Anhydride Content of Alkyd Resins and Resin Solutions (Withdrawn 2004)
- ASTM-D5768 - Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
- ASTM-D601 - Standard Specification for Oiticica Oil (Permanently Liquid) (Withdrawn 2007)
- ASTM-D6090 - Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
- ASTM-D6166 - Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
- ASTM-D6887 - Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
- ASTM-D8005 - Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
- ASTM-D802 - Standard Test Methods for Sampling and Testing Pine Oils
- ASTM-D803 - Standard Test Methods for Testing Tall Oil
- ASTM-D889 - Standard Test Method for Volatile Oil in Rosin
- ASTM-D960 - Standard Specification for Raw Castor Oil (Withdrawn 2007)
- ASTM-D961 - Standard Specification for Dehydrated Castor Oil
- ASTM-E28 - Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
BSI:
- BS-6782-1 - Binders for paints. Method for determination of volatile and non-volatile content
- BS-6782-11 - Binders for Paints, Determination of the Viscosity of Industrial Cellulose Nitrate Sol
- BS-6782-12 - Binders for paints. Estimation of colour of clear liquids by the platinum-cobalt scale
- BS-6782-17 - Part 17: Determination of Meq Value of Water-Dilutable Binders
- BS-6782-18 - General Methods of Test for Water-Dilutable Binders
- BS-6782-4 - Binders for paints. Method for determination of hydroxyl value (titrimetric method)
- BS-6782-5 - Binders for paints. Method for estimation of colour of clear liquids by the Gardner colour scale
- BS-6782-6 - Binders for paints. Method for determination of softening point (ring and ball method)
- BS-6900 - Specification for Raw, Refined & Boiled Linseed Oils for Paints & Varnishes
- BS-EN-ISO-10283 - Binders for paints and varnishes. Determination of monomeric diisocyanates in isocyanate resins
- BS-EN-ISO-11668 - Binders for paints and varnishes. Chlorinated polymerization resins. General methods of test
- BS-EN-ISO-11909 - Binders for paints and varnishes. Polyisocyanate resins. General methods of test
- BS-EN-ISO-13632 - Binders for paints and varnishes. Rosin. Sampling and sample preparation for colour measurement
- BS-EN-ISO-13885-1 - Gel permeation chromatography (GPC)
- BS-EN-ISO-13885-2 - Gel permeation chromatography (GPC)
- BS-EN-ISO-13885-3 - Gel permeation chromatography (GPC)
- BS-EN-ISO-14446 - Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
- BS-EN-ISO-150 - Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test
- BS-EN-ISO-150-TC - Tracked Changes. Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test
- BS-EN-ISO-15715 - Binders for paints and varnishes. Determination of turbidity
- BS-EN-ISO-16482-1 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Oven method
- BS-EN-ISO-16482-2 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Microwave method
- BS-EN-ISO-16805 - Binders for paints and varnishes. Determination of glass transition temperature
- BS-EN-ISO-2114 - Plastics (polyester resins) and paints and varnishes (binders). Determination of partial acid value and total acid value
- BS-EN-ISO-276 - Binders for paints and varnishes. Linseed stand oil. Requirements and methods of test
- BS-EN-ISO-277 - Binders for paints and varnishes. Raw tung oil. Requirements and methods of test
- BS-EN-ISO-3251 - Paints, varnishes and plastics. Determination of non-volatile-matter content
- BS-EN-ISO-4625-1 - Binders for paint and varnishes. Determination of softening point
- BS-EN-ISO-4625-2 - Binders for paint and varnishes. Determination of softening point
- BS-EN-ISO-4629 - Binders for paints and varnishes. Determination of hydroxyl value. Titrimetric method
- BS-EN-ISO-4629-1 - Binders for paints and varnishes. Determination of hydroxyl value
- BS-EN-ISO-4629-2 - Binders for paints and varnishes. Determination of hydroxyl value
- BS-EN-ISO-4629-3 - Binders for paints and varnishes. Determination of hydroxyl value
- BS-EN-ISO-4630 - Clear liquids. Estimation of colour by the Gardner colour scale
- BS-EN-ISO-4630-1 - Clear liquids. Estimation of colour by the Gardner colour scale
- BS-EN-ISO-4630-2 - Clear liquids. Estimation of colour by the Gardner colour scale
- BS-EN-ISO-6271 - Clear liquids. Estimation of colour by the platinum-cobalt colour scale
- BS-EN-ISO-6271-1 - Clear liquids. Estimation of colour by the platinum-cobalt scale
- BS-EN-ISO-6271-2 - Clear liquids. Estimation of colour by the platinum-cobalt scale
- BS-EN-ISO-7142 - Binders for paints and varnishes. Epoxy resins. General methods of test
- BS-EN-ISO-7142-TC - Tracked Changes. Binders for paints and varnishes. Epoxy resins. General methods of test
- BS-EN-ISO-7143 - Binders for Paints and varnishes. Methods of test for characterizing water-based binders
- BS-ISO-13885-1 - Gel permeation chromatography (GPC)
- BS-ISO-13885-2 - Gel permeation chromatography (GPC)
- BS-ISO-13885-3 - Gel permeation chromatography (GPC)
- BS-ISO-150 - Raw, Refined & Boiled Linseed Oil for Paints & Varnishes, Specifications & Methods Of
- BS-ISO-15715 - Binders for Paints & Varnishes, Determination of Turbidity
- BS-ISO-16482-1 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Oven method
- BS-ISO-16482-2 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Microwave method
- BS-ISO-19334 - Binders for Paints & Varnishes, Gum Rosin, Gas-Chromatographic Analysis
- BS-ISO-276 - Binders for Paints & Varnishes, Linseed Stand Oil, Requirements & Methods of Test
- BS-ISO-277 - Binders for Paints & Varnishes, Raw Tung Oil, Requirements &Methods of Test
- BS-ISO-4629-3 - Binders for paints and varnishes. Determination of hydroxyl value
ISO:
- ISO-10283 - Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins
- ISO-11668 - Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test
- ISO-11908 - Binders for paints and varnishes - Amino resins - General methods of test
- ISO-11909 - Binders for paints and varnishes - Polyisocyanate resins - General methods of test
- ISO-13632 - Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement
- ISO-13885-1 - Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent
- ISO-13885-2 - Gel permeation chromatography (GPC) - Part 2: N,N-Dimenthylacetamide (DMAC) as eluent
- ISO-13885-3 - Gel permeation chromatography (GPC) - Part 3: Water as eluent
- ISO-14446 - Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
- ISO-150 - Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test
- ISO-15715 - Binders for paints and varnishes - Determination of turbidity
- ISO-15880 - Paints, varnishes and binders -- Determination of MEQ value of water-based coating materials and binders
- ISO-16482-1 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method
- ISO-16482-2 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method
- ISO-16805 - Binders for paints and varnishes - Determination of glass transition temperature
- ISO-19334 - Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
- ISO-2114 - Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value
- ISO-276 - Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
- ISO-277 - Binders for paints and varnishes - Raw tung oil - Requirements and methods of test
- ISO-3251 - Paints, varnishes and plastics - Determination of non-volatile-matter content
- ISO-3681 - Binders for paints and varnishes - Determination of saponification value - Titrimetric method
- ISO-4625 - Binders for paints and varnishes - Determination of softening point - Ring-and-ball method
- ISO-4625-1 - Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method
- ISO-4625-2 - Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method
- ISO-4629 - Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method
- ISO-4629-1 - Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst
- ISO-4629-2 - Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst
- ISO-4629-3 - Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test
- ISO-4630 - Clear liquids - Estimation of colour by the Gardner colour scale
- ISO-4630-1 - Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method
- ISO-4630-2 - Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method
- ISO-6271 - Clear liquids - Estimation of colour by the platinum-cobalt colour scale
- ISO-6271-1 - Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method
- ISO-6271-2 - Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method
- ISO-6744-1 - Binders for paints and varnishes -- Alkyd resins -- Part 1: General methods of test
- ISO-6744-2 - Binders for paints and varnishes -- Alkyd resins -- Part 2: Determination of phthalic anhydride content
- ISO-6744-3 - Binders for paints and varnishes -- Alkyd resins -- Part 3: Determination of unsaponifiable matter content
- ISO-6744-4 - Binders for paints and varnishes -- Alkyd resins -- Part 4: Determination of fatty acid content
- ISO-7142 - Binders for paints and varnishes - Epoxy resins - General methods of test
- ISO-7143 - Binders for paints and varnishes - Methods of test for characterizing water-based binders
- ISO-9020 - Corrigendum
Other SDOs:
- DIN-EN-ISO-10283 - Binders for Paints & Varnishes - Determination of Monomeric Diisocyanates in Polyisoc
- DIN-EN-ISO-11909 - Binders for Paints & Varnishes - Polyisocyanate Resins - General Methods of Test
- DIN-EN-ISO-150 - Raw, Refined & Boiled Linseed Oil for Paints & Varnishes - Specifications & Methods Of
- DIN-EN-ISO-15715 - Binders for Paints & Varnishes - Determination of Turbidity
- DIN-EN-ISO-15880 - Paints, Varnishes & Binders, Determination of Meq Value of Water-Based Coating Materia
- DIN-EN-ISO-16805 - Binders for Paints & Varnishes, Determination of Glass Transition Temperature
- DIN-EN-ISO-2114 - Plastics (Polyester Resins) & Paints & Varnishes (Binders),Determination of Partial A
- DIN-EN-ISO-4625-1 - Part 1: Ring-&-Ball Method, Binders for Paints & Varnishes - Determination of Softenin
- DIN-EN-ISO-4625-2 - Part 2: Cup-&-Ball Method, Binders for Paints & Varnishes - Determination of Softenin
- DIN-EN-ISO-4630-1 - Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method
- DIN-EN-ISO-4630-2 - Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method
- DIN-EN-ISO-6271-1 - Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method
- DIN-EN-ISO-6271-2 - Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method
- DIN-EN-ISO-6744-1 - Part 1: General Methods of Test, Binders for Paints & Varnishes, Alkyd Resins
- DIN-EN-ISO-6744-2 - Part 2: Determination of Phthalic Anhydride Content, Binders for Paints & Varnishes, A
- DIN-EN-ISO-6744-3 - Part 3: Determination of Unsaponifiable Matter Content, Binders for Paints & Varnishes
- DIN-EN-ISO-6744-4 - Part 4: Determination of Fatty Acid Content, Binders for Paints & Varnishes, Alkyd Res
- DIN-EN-ISO-7142 - Binders for Paints & Varnishes - Epoxy Resins - General Methods of Test
- DIN-EN-ISO-7143 - Binders for Paints & Varnishes - Methods of Test for Characterizing Water-Based Binder
- DIN-ISO-15715 - Binders for Paints & Varnishes, Determination of Turbidity
- DIN-ISO-15880 - Paints, Varnishes & Binders, Determination of Meq Value of Water-Based Coating Materia
- DIN-ISO-6744-1 - Part 1: General Methods of Test, Binders for Paints & Varnishes - Alkyd Resins
- DIN-ISO-6744-2 - Part 2: Determination of Phthalic Anhydride Content, Bindersfor Paints & Varnishes - A
- DIN-ISO-6744-3 - Part 3: Determination of Unsaponifiable Matter Content, Binders for Paints & Varnishes
- DIN-ISO-6744-4 - Part 4: Determination of Fatty Acid Content, Binders for Paints & Varnishes - Alkyd Re
- EN-ISO-10283 - Binders for Paints & Varnishes, Determination of Monomeric Diisocyanates in Isocyanate
- EN-ISO-11909 - Binders for Paints & Varnishes - Polyisocyanate Resins - General Methods of Test
- EN-ISO-13632 - Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)
- EN-ISO-14446 - Binders for Paints & Varnishes - Determination of the Viscosity of Industrial Cellulos
- EN-ISO-150 - Raw, Refined & Boiled Linseed Oil for Paints & Varnishes - Specifications & Methods Of
- EN-ISO-15715 - Binders for Paints & Varnishes - Determination of Turbidity
- EN-ISO-15880 - Paints, Varnishes & Binders, Determination of Meq Value of Water-Based Coating Materia
- EN-ISO-16482-1 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method
- EN-ISO-16482-2 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method
- EN-ISO-16805 - Binders for Paints & Varnishes, Determination of Glass Transition Temperature
- EN-ISO-19334 - Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
- EN-ISO-276 - Binders for Paints & Varnishes - Linseed Stand Oil - Requirements & Methods of Test
- EN-ISO-3251 - Paints, Varnishes & Plastics, Determination of Non-Volatile-Matter Content
- EN-ISO-4625-1 - Part 1: Ring-&-Ball Method, Binders for Paints & Varnishes - Determination of Softenin
- EN-ISO-4625-2 - Binders for Paint & Varnishes, Determination of Softening Point, Cup-&-Ball Method
- EN-ISO-4629-1 - Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst
- EN-ISO-4629-2 - Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst
- EN-ISO-4630 - Clear liquids - Estimation of colour by the Gardner colour scale
- EN-ISO-4630-1 - Part 1: Visual Method, Clear Liquids, Estimation of Colour by the Gardner Colour Scale
- EN-ISO-4630-2 - Part 2: Spectrophotometric Method, Clear Liquids, Estimation of Colour by the Gardner
- EN-ISO-6271 - Clear liquids - Estimation of colour by the platinum-cobalt colour scale
- EN-ISO-6271-1 - Part 1: Visual Method, Clear Liquids, Estimation of Colour the Platinum-Cobalt Scale
- EN-ISO-6271-2 - Part 2: Spectrophotometric Method, Clear Liquids, Estimation of Colour by the Platinum
- EN-ISO-6744-1 - Part 1: General Methods of Test, Binders for Paints & Varnishes, Alkyd Resins
- EN-ISO-6744-2 - Part 2: Determination of Phthalic Anhydride Content, Binders for Paints & Varnishes, A
- EN-ISO-6744-3 - Part 3: Determination of Unsaponifiable Matter Content, Binders for Paints & Varnishes
- EN-ISO-6744-4 - Part 4: Determination of Fatty Acid Content, Binders for Paints & Varnishes, Alkyd Res
- EN-ISO-7142 - Binders for Paints & Varnishes - Epoxy Resins - General Methods of Test
- EN-ISO-7143 - Binders for Paints & Varnishes - Methods of Test for Characterizing Water-Based Bindes
- SS-EN-16980-1 - Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
- SS-EN-ISO-10283 - Binders for paints and varnishes - Determination of monomeric diisocyanates in polyisocyanate resins (ISO 10283:2007)
- SS-EN-ISO-11668 - Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997)
- SS-EN-ISO-11908 - Binders for paints and varnishes - Amino resins - General methods of test
- SS-EN-ISO-11909 - Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)
- SS-EN-ISO-13632 - Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)
- SS-EN-ISO-13885-1 - Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)
- SS-EN-ISO-13885-2 - Gel permeation chromatography (GPC) - Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020)
- SS-EN-ISO-13885-3 - Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
- SS-EN-ISO-14446 - Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
- SS-EN-ISO-150 - Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2018)
- SS-EN-ISO-15715 - Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003)
- SS-EN-ISO-15880 - Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)
- SS-EN-ISO-16482-1 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method (ISO 16482-1:2013)
- SS-EN-ISO-16482-2 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method (ISO 16482-2:2013)
- SS-EN-ISO-16805 - Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003)
- SS-EN-ISO-19334 - Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis (ISO 19334:2010)
- SS-EN-ISO-276 - Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)
- SS-EN-ISO-277 - Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002)
- SS-EN-ISO-3251 - Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
- SS-EN-ISO-3681 - Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018)
- SS-EN-ISO-4625-1 - Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)
- SS-EN-ISO-4625-2 - Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004)
- SS-EN-ISO-4629 - Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996)
- SS-EN-ISO-4629-1 - Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016)
- SS-EN-ISO-4629-2 - Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016)
- SS-EN-ISO-4629-3 - Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)
- SS-EN-ISO-4630 - Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015)
- SS-EN-ISO-4630-1 - Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method (ISO 4630-1:2004)
- SS-EN-ISO-4630-2 - Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method (ISO 4630-2:2004)
- SS-EN-ISO-6271 - Clear liquids - Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015)
- SS-EN-ISO-6271-1 - Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method (ISO 6271-1:2004)
- SS-EN-ISO-6271-2 - Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method (ISO 6271-2:2004)
- SS-EN-ISO-6744-1 - Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999)
- SS-EN-ISO-6744-2 - Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999)
- SS-EN-ISO-6744-3 - Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999)
- SS-EN-ISO-6744-4 - Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999)
- SS-EN-ISO-7142 - Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007)
- SS-EN-ISO-7143 - Paints, varnishes and binders - Methods of test for characterizing water-based binders (ISO 7143:2007)
- SS-EN-ISO-9020 - Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996)