Document Center List of Standards on Road Vehicle Tyres Including Cycle Tyres, And Tyre Retreading And Repair Processes
ICS Code 83.160.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D4975 - Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel (Withdrawn 2023)
- ASTM-E1136 - Standard Specification for P195/75R14 Radial Standard Reference Test Tire
- ASTM-E1551 - Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire
- ASTM-E1844 - Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire
- ASTM-E501 - Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
- ASTM-E524 - Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
- ASTM-F1016 - Standard Practice for Linear Tire Treadwear Data Analysis
- ASTM-F1035 - Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
- ASTM-F1046 - Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
- ASTM-F1426 - Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
- ASTM-F1502 - Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
- ASTM-F1572 - Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces
- ASTM-F1649 - Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
- ASTM-F1650 - Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
- ASTM-F1805 - Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
- ASTM-F1922 - Standard Test Method for Tires, Pneumatic, Vehicular, Highway
- ASTM-F2663 - Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires
- ASTM-F2779 - Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
- ASTM-F2838 - Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
- ASTM-F2869 - Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
- ASTM-F2870 - Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
- ASTM-F2871 - Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
- ASTM-F2872 - Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
- ASTM-F376 - Test Method for Tires for Wet Traction Performance in Cornering (Withdrawn 1994)
- ASTM-F403 - Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using Highway Vehicles (Withdrawn 2007)
- ASTM-F408 - Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
- ASTM-F414 - Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
- ASTM-F421 - Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
- ASTM-F435 - Method of Test for Peak Wet Traction of Tires in Cornering With Driving Torque Application, Using Highway Vehicles (Withdrawn 1988)
- ASTM-F460 - Method for Laboratory Test for Relative Cornering and Aligning Stiffnesses of Passenger Car Tires (Withdrawn 1985)
- ASTM-F554 - Test Method for Wet Cornering Traction of Tires Using Over-The-Road Tire Tester (Withdrawn 1988)
- ASTM-F724 - Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
- ASTM-F762 - Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
- ASTM-F870 - Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
- ASTM-PS63 - Test Method for Tires, Pneumatic, Vehicular, Highway (Withdrawn 1998)
- ASTM-PS86 - Test Method for Tires, Pneumatic, Low Speed, Off Highway (Withdrawn 1998)
BSI:
- BS-AU-144B - Specification for retreaded car and commercial vehicle tyres
- BS-AU-144F - Specification for retreaded car and commercial vehicle tyres
- BS-AU-159E - Specification for Repairs To Tyres for Motor Vehicles Used on the Public Highway
- BS-AU-159F - Specification for repairs to tyres for motor vehicles used on the public highway
- BS-AU-159G - Specification for repairs to tyres for motor vehicles used on the public highway
- BS-AU-50-1-0C - Tyres and Wheels, Tyres, General
- BS-AU-50-1.0D - Tyres and wheels. Tyres
- BS-AU-50-1.1.1C - Tyres and wheels. Tyres. Car tyres
- BS-AU-50-1.1.2 - Tyres and wheels. Tyres. Car tyres. Methods for measuring rolling circumference. Loaded new tyres
- BS-AU-50-1.1.3 - Tyres and wheels. Tyres. Car tyres
- BS-AU-50-1.2.1B - Tyres and wheels. Tyres. Commercial vehicle tyres
- BS-AU-50-1.2.2 - Tyres and Wheels, Tyres, Commercial Vehicle Tyres, Method of Measuring Tyre Rolling Circumference, Loaded New Tyres
- BS-AU-50-1.2.4 - Tyres and wheels. Tyres. Commercial vehicle tyres. Method of test for verifying tyre capabilities
- BS-AU-50-1.4.5 - Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for designations, dimensions and marking for metric series tyres
- BS-AU-50-1.5.1 - Tyres and wheels. Tyres. Industrial vehicle tyres
- BS-AU-50-1.5.5 - Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for solid tyres (metric series) for pneumatic tyre rims. Load ratings
- BS-AU-50-1-5D - Tyres and wheels. Tyres. Industrial vehicle tyres
- BS-AU-50-1.6.1C - Tyres and wheels. Tyres. Motorcycle tyres. Specification of general requirements and design guide for designations, dimensions and load ratings for metric series tyres. Section 6: Motorcycle tyres Subsection 6.1c: Specification for general requirements and design guide for designations, dimensions and load-carrying capacity for metric series tyres
- BS-AU-50-1.6.2C - Tyres and wheels. Tyres. Motorcycle tyres. Specification for designations, dimensions and load ratings for metric series 100, 90, 80, 70, 60, 55 and 50 tyres
- BS-AU-50-1.6.3A - Tyres and wheels. Tyres. Motorcycle tyres. Specifications for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres
- BS-AU-50-1.6.6B - Tyres and wheels. Tyres. Motorcycle tyres. Method of test for verifying tyre capabilities
- BS-AU-50-1.7.1 - Tyres and wheels. Tyres. Moped tyres. Specification for tyre designations, dimensions and load ratings
- BS-AU-50-1.8 - Tyres and wheels. Tyres.
- BS-AU-50-2.0A - Tyres & Wheels, Wheels & Rims, General (Including Terms & Definitions, & Construction
- BS-AU-50-2.0B - Tyres & Wheels, Wheels & Rims, General (Including Vocabulary, Designation & Marking)
- BS-AU-50-2-1B - Tyres and wheels. Wheels and rims. Rim profiles and dimensions (including openings for valves)
- BS-AU-50-2-6A - Tyres and wheels. Wheels and rims
- BS-AU-50-2.7A - Tyres and wheels. Wheels and rims. Code of practice for the selection and care of tyres and wheels for commercial vehicles
- BS-AU-50-2-7B - Tyres and wheels
- BS-AU-50-2.7B - Tyres and wheels
- BS-AU-50-3-2 - Tyres and wheels. Valves
- BS-AU-50-3.8 - Tyres and wheels. Valves
- BS-EN-12645 - Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
- BS-EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG). Interoperability between Tyre Information Systems (TIS) and TPG. Interfaces and Requirements
- BS-EN-16662-1 - Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles
- BS-EN-17347 - Road vehicles. Machines for mounting and demounting vehicle tyres. Safety requirements
- BS-ISO-10191 - Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
- BS-ISO-10191-TC - Tracked Changes. Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
- BS-ISO-10231 - Motorcycle tyres. Test methods for verifying tyre capabilities
- BS-ISO-10231-TC - Tracked Changes. Motorcycle tyres. Test methods for verifying tyre capabilities
- BS-ISO-13325 - Tyres. Coast-by methods for measurement of tyre-to-road sound emission. Uncertainties
- BS-ISO-15222 - Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres
- BS-ISO-15222-TC - Tracked Changes. Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres
- BS-ISO-16992 - Passenger car tyres. Spare unit substitutive equipment (SUSE)
- BS-ISO-18106 - Passenger car, commercial vehicle, truck and bus tyres. Methods for measuring snow grip performance. Loaded new tyres
- BS-ISO-18164 - Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance
- BS-ISO-19940 - Tyre stiffness index testing procedure for passenger car extended mobility and run flat tyres
- BS-ISO-21750 - Road vehicles. Safety enhancement in conjunction with tyre inflation pressure monitoring
- BS-ISO-23671 - Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
- BS-ISO-28580 - Passenger car, truck and bus tyre rolling resistance measurement method. Single point test and correlation of measurement results
- BS-ISO-28580-TC - Tracked Changes. Passenger car, truck and bus tyre rolling resistance measurement method. Single point test and correlation of measurement results
- BS-ISO-29802 - All-terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5 tapered rims. Designation, dimension, marking and load ratings
- BS-ISO-4000-1 - Passenger car tyres and rims
- BS-ISO-4000-1-TC - Tracked Changes. Passenger car tyres and rims
- BS-ISO-5751-1 - Motorcycle tyres and rims (metric series)
- BS-ISO-5751-2 - Motorcycle tyres and rims (metric series)
- BS-ISO-5751-3 - Motorcycle tyres and rims (metric series)
- BS-ISO-5775-1 - Bicycle tyres and rims
- BS-ISO-5775-1-TC - Tracked Changes. Bicycle tyres and rims
- BS-ISO-9112 - Truck and bus tyres. Methods of measuring tyre rolling circumference. Loaded new tyres
ISO:
- ISO-10191 - Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
- ISO-10231 - Motorcycle tyres - Test methods for verifying tyre capabilities
- ISO-10231-1 - - Amendment 1
- ISO-10454 - Truck and bus tyres - Verifying tyre capabilities - Laboratory test methods
- ISO-13325 - Tyres - Coast-by methods for measurement of tyre-to-road sound emission
- ISO-13325-AM1 - - Amendment 1: Tyres - Coast-by methods for measurement of tyre-to-road sound emission - Amendment 1: Uncertainties
- ISO-13327 - Motorcycle tyres - Method of measuring rolling resistance
- ISO-13328 - Motorcycle tyres -- Measurement of tyre rolling circumference -- Loaded new tyres
- ISO-15222 - Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres
- ISO-16992 - Passenger car tyres - Spare unit substitutive equipment (SUSE)
- ISO-17269 - Passenger car tyres -- Methods for measuring rolling circumference -- Loaded new tyres
- ISO-18106 - Passenger car, commercial vehicle, truck and bus tyres - Methods for measuring snow grip performance - Loaded new tyres
- ISO-18164 - Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance
- ISO-19447 - Passenger car tyres - Method for measuring ice grip performance - Loaded new tyres
- ISO-19940 - Tyre stiffness index testing procedure for passenger car extended mobility and run flat tyres
- ISO-20908 - Tyre sound emission test - Methods of drum
- ISO-21750 - Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoring
- ISO-23671 - Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres
- ISO-29802 - All-terrain (AT) tyres and rims - Symbol marked pneumatic tyres on 5 degree tapered rims - Designation, dimension, marking and load ratings
- ISO-4000-1 - Passenger car tyres and rims - Part 1: Tyres (metric series)
- ISO-4000-1-1 - Passenger car tyres and rims - Part 1: Tyres (metric series)Amendment 1
- ISO-4209-1 - Truck and bus tyres and rims (metric series) - Part 1: Tyres
- ISO-4249-1 - Motorcycle tyres and rims (Code designated series) - Part 1 : Tyres
- ISO-4249-2 - Motorcycle tyres and rims (Code-designated series) - Part 2: Tyre load ratings
- ISO-5751-1 - Motorcycle tyres and rims (metric series) - Part 1: Design guides
- ISO-5751-2 - Motorcycle tyres and rims (metric series) - Part 2: Tyre dimensions and load-carrying capacities
- ISO-5751-3 - Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
- ISO-5775-1 - Bicycle tyres and rims - Part 1: Tyre designations and dimensions
- ISO-6054-1 - Motorcycle tyres and rims (code-designated series) - Diameter codes 4 to 12 - Part 1: Tyres
- ISO-8767 - Passenger car tyres - Methods of measuring rolling resistance
- ISO-9112 - Truck and bus tyres - Methods of measuring tyre rolling circumference - Loaded new tyres
- ISO-9948 - Truck and bus tyres - Methods of measuring rolling resistance
Other SDOs:
- EN-12645 - Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
- EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements
- JIS-K-6366 - Motorcycle tyres
- SS-EN-12645 - Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
- SS-EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements
- SS-EN-16662-1 - Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 1: General safety and performance requirements
- SS-EN-17347 - Road vehicles - Machines for mounting and demounting vehicle tyres - Safety requirements
- SS-ISO-10191 - Passenger car tyres - Verifying tyre capabilities - Laboratory test methods (ISO 10191:2010, IDT)
- SS-ISO-10231 - Motorcycle tyres - Test methods for verifying tyre capabilities
- SS-ISO-10475 - Valves for tubeless tyres and valves for tubes - Identification system for valves and their components
- SS-ISO-13325 - Tyres - Coast-by methods for measurement of tyre-to-road sound emission
- SS-ISO-15222 - Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres (ISO 15222:2021, IDT)
- SS-ISO-16992 - Passenger car tyres - Spare unit substitutive equipment (SUSE) (ISO 16992:2018, IDT)
- SS-ISO-18106 - Passenger car, commercial vehicle, truck and bus tyres - Methods for measuring snow grip performance - Loaded new tyres (ISO 18106:2016, IDT)
- SS-ISO-18164 - Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance (ISO 18164:2005, IDT)
- SS-ISO-21750 - Road vehicles - Safety enhancement in conjunction with the tyre inflation pressure monitoring (ISO 21750:2006, IDT)
- SS-ISO-23671 - Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres (ISO 23671:2021, IDT)
- SS-ISO-3877-1 - Tyres, valves and tubes - List of equivalent terms - Part 1: Tyres (ISO 3877-1:1997, IDT)
- SS-ISO-3877-2 - Tyres, valves and tubes - List of equivalent terms - Part 2: Tyre valves (ISO 3877-2:1997, IDT)
- SS-ISO-3877-3 - Tyres, valves and tubes - List of equivalent terms - Part III: Tubes
- SS-ISO-3877-4 - Tyres, valves and tubes - List of equivalent terms - Part 4: Solid tyres
- SS-ISO-3894 - Road vehicles - Wheels/rims for commercial vehicles - Test methods (ISO 3894:2005, IDT)
- SS-ISO-4000-1 - Passenger car tyres and rims - Part 1: Tyres (metric series) (ISO 4000-1:2013, IDT)
- SS-ISO-4000-2 - Passenger car tyres and rims - Part 2: Rims (ISO 4000-2:2013, IDT)
- SS-ISO-4209-1 - Truck and bus tyres and rims (metric series) - Part 1: Tyres
- SS-ISO-4209-2 - Truck and bus tyres and rims (metric series) - Part 2: Rims (ISO 4209-2:2020, IDT)
- SS-ISO-4223-1 - Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres (ISO 4223-1:2017, IDT)
- SS-ISO-4223-2 - Definitions of some terms used in the tyre industry - Part 2: Solid tyres
- SS-ISO-4251-1 - Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 1: Tyre designation and dimensions, and approved rim contours (ISO 4251-1:2005, IDT)
- SS-ISO-4251-2 - Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 2: Tyre load ratings (ISO 4251-2:2005, IDT)
- SS-ISO-4251-4 - Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 4: Tyre classification and nomenclature (ISO 4251-4:2010, IDT)
- SS-ISO-4251-5 - Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 5: Log skidder tyres
- SS-ISO-5775-1 - Cycles - Bicycle tyres and rims - Part 1: Tyre designations and dimensions
- SS-ISO-5775-2 - Cycles - Bicycle tyres and rims - Part 2: Rims (ISO 5775-2:2021, IDT)
- SS-ISO-6762 - Tyre valves - ISO core chamber No. 2
- SS-ISO-7442 - Tyre valves - ISO core chamber No. 1
- SS-ISO-7867-1 - Tyres and rims (metric series) for agricultural tractors and machines - Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination (ISO 7867-1:2005, IDT)
- SS-ISO-9112 - Truck and bus tyres - Methods of measuring tyre rolling circumference - Loaded new tyres (ISO 9112:2008, IDT)