Document Center List of Standards on Tyres In General
ICS Code 83.160.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D2000 - Standard Classification System for Rubber Products in Automotive Applications
- ASTM-D2692 - Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns (Withdrawn 2024)
- ASTM-D2969 - Standard Test Methods for Steel Tire Cords (Withdrawn 2023)
- ASTM-D2970 - Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments (Withdrawn 2023)
- ASTM-D4776 - Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
- ASTM-D4777 - Test Method For Adhesion Of Tire Cords And Other Reinforcing Cords To Rubber Compounds By Hot U-Test Procedure (Withdrawn 1994)
- ASTM-D6270 - Standard Practice for Use of Scrap Tires in Civil Engineering Applications
- ASTM-D6477 - Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
- ASTM-D6588 - Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
- ASTM-D6700 - Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
- ASTM-D7760 - Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
- ASTM-D885 - Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023)
- ASTM-E1859 - Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
- ASTM-F1082 - Standard Practice for Tires-Determining Precision for Test Method Standards (Withdrawn 2006)
- ASTM-F1112 - Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
- ASTM-F1806 - Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
- ASTM-F1971 - Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
- ASTM-F2493 - Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
- ASTM-F3015 - Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
- ASTM-F538 - Standard Terminology Relating to the Characteristics and Performance of Tires
- ASTM-F551 - Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
- ASTM-F811 - Standard Practice for Accelerometer Use in Vehicles for Tire Testing
- ASTM-G105 - Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
BSI:
- BS-AU-50-3.1B - Tyres and wheels. Valves. Specification for valve dimensions and designation
- BS-AU-50-3.1C - Tyres and wheels. Valves. Tyre valves. Dimensions and designation
- BS-AU-50-3.1D - Tyres & Wheels, Valves, Tyres & Wheels, Tyre Valves, Dimensions & Designation
- BS-AU-50-3.1E - Tyres and wheels. Valves. Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves
- BS-EN-14243-1 - Materials obtained from end of life tyres
- BS-EN-14243-2 - Materials obtained from end of life tyres
- BS-EN-14243-3 - Materials obtained from end of life tyres
- BS-ISO-14960-1 - Tubeless tyres. Valves and components
- BS-ISO-14960-1-TC - Tracked Changes. Tubeless tyres. Valves and components.Snap-in tyre valves test methods.
- BS-ISO-14960-2 - Tubeless tyres. Valves and components
- BS-ISO-14960-2-TC - Tracked Changes. Tubeless tyres. Valves and components
- BS-ISO-16392 - Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig
- BS-ISO-16392-TC - Tracked Changes. Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig
- BS-ISO-17464 - Pneumatic tubes for automotive vehicles. Technical requirements and test methods
- BS-ISO-17832 - Non-parallel steel wire and cords for tyre reinforcement
- BS-ISO-18885-1 - TPMS snap-in valves
- BS-ISO-18885-2 - TPMS snap-in valves
- BS-ISO-18885-3 - TPMS snap-in valves
- BS-ISO-20562 - Tyre valves. ISO core chambers No. 1, No. 2, No. 3 and No. 4
- BS-ISO-20909 - Radio frequency identification (RFID) tyre tags
- BS-ISO-20910 - Coding for radio frequency identification (RFID) tyre tags
- BS-ISO-20912 - Conformance test methods for RFID enabled tyres
- BS-ISO-21634 - Rubber flaps for tyres. Requirements and test methods
- BS-ISO-22640 - Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- BS-ISO-22640-TC - Tracked Changes. Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- BS-ISO-24163-1 - Clamp-in tyre valves for tyre pressure monitoring systems
- BS-ISO-24163-2 - Clamp-in tyre valves for tyre pressure monitoring systems
- BS-ISO-24469 - Road wear test of studded tyres
- BS-ISO-28580-TC - Tracked Changes. Passenger car, truck and bus tyre rolling resistance measurement method. Single point test and correlation of measurement results
- BS-ISO-3877-4 - Tyres, valves and tubes. List of equivalent terms
- BS-ISO-4223-1 - Definitions of some terms used in the tyre industry
- BS-ISO-4223-2 - Definitions of some terms used in the tyre industry
- BS-ISO-9413 - Tyre valves. Dimensions and designation
- CWA-14243 - Post-Consumer Tyre Materials & Applications
- DD-CEN-14243 - Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities
- PD-CEN-16916 - Materials obtained from End of Life Tyres. Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
- PD-CEN-17045 - Materials obtained from end-of-life tyres. Quality criteria for the selection of whole tyres, for recovery and recycling processes
- PD-CEN-17188 - Materials obtained from end of life tyres (ELT). Sampling method for granulates and powders stored in big-bags
- PD-CEN-17189 - Materials obtained from end of life tyres (ELT). Determination of the true density of granulates. Method based on water pycnometry
- PD-CEN-17307 - Material derived from End-of-Life tyres. Granulates and powders. Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
- PD-CEN-17308 - Materials produced from end of life tyres. Steel wire. Determination of the non-metallic content
- PD-CEN-17510 - Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
- PD-ISO-16377 - Further clarification of ISO 28580
- PD-ISO-21396 - Rubber. Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments. Pyrolysis-GC/MS method
- PD-ISO-22640 - Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- PD-ISO-22687 - Rubber. Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
- PD-ISO-29846 - Tyres, valves and tubes. kPa/psi equivalencies for inflation pressures
- PD-ISO/TS-22687 - Rubber. Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
ISO:
- ISO-10475 - Valves for tubeless tyres and valves for tubes - Identification system for valves and their components
- ISO-13326 - Test methods for measuring tyre uniformity
- ISO-14960 - Tubeless tyres - Valves and components - Test methods
- ISO-14960-1 - Tubeless tyres - Valves and components - Part 1: Snap-in tyre valves test methods
- ISO-14960-2 - Tubeless tyres - Valves and components - Part 2: Clamp-in tubeless tyre valve - Test methods
- ISO-16377 - Further clarification of ISO 28580
- ISO-16392 - Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
- ISO-17464 - Pneumatic tubes for automotive vehicles - Technical requirements and test methods
- ISO-17832 - Non-parallel steel wire and cords for tyre reinforcement
- ISO-18885-1 - TPMS snap-in valves - Part 1: Identification
- ISO-18885-2 - TPMS snap-in valves - Part 2: Valve environment
- ISO-18885-3 - TPMS snap-in valves - Part 3: Performances
- ISO-19283 - Condition monitoring and diagnostics of machines - Hydroelectric generating units
- ISO-20430 - Plastics and rubber machines - Injection moulding machines - Safety requirements
- ISO-20562 - Tyre valves - ISO core chambers No. 1, No. 2, No. 3 and No. 4
- ISO-20909 - Radio frequency identification (RFID) tyre tags
- ISO-20910 - Coding for radio frequency identification (RFID) tyre tags
- ISO-20911 - Radio frequency identification (RFID) tyre tags - Tyre attachment classification
- ISO-20912 - Conformance test methods for RFID enabled tyres
- ISO-21396 - Rubber - Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments - Pyrolysis-GC/MS method
- ISO-21634 - Rubber flaps for tyres - Requirements and test methods
- ISO-22638 - Rubber - Generation and collection of tyre and road wear particles (TRWP) - Road simulator laboratory method
- ISO-22640 - Rubber - Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- ISO-22687 - Rubber - Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
- ISO-23475-1 - Testing method for steel tyre cord - Part 1: General requirements
- ISO-24163-1 - Clamp-in tyre valves for tyre pressure monitoring systems - Part 1: Definition, types, dimensions and valve interface
- ISO-24163-2 - Clamp-in tyre valves for tyre pressure monitoring systems - Part 2: Test methods and performance
- ISO-24469 - Road wear test of studded tyres
- ISO-28580 - Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results
- ISO-29846 - Tyres, valves and tubes - kPa/psi equivalencies for inflation pressures
- ISO-3877-1 - Tyres, valves and tubes - List of equivalent terms - Part 1: Tyres
- ISO-3877-2 - Tyres, valves and tubes - List of equivalent terms - Part 2: Tyre valves
- ISO-3877-3 - Tyres, valves and tubes - List of equivalent terms - Part 3: Tubes
- ISO-3877-4 - Tyres, valves and tubes - List of equivalent terms - Part 4 : Solid tyres
- ISO-3877-4-AM1 - - Amendment 1
- ISO-4223-1 - Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres
- ISO-4223-1-1 - Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres - Amendment 1
- ISO-4223-2 - Definitions of some terms used in the tyre industry - Part 2: Solid tyres
- ISO-4223-2-AM1 - - Amendment 1
- ISO-4570 - Tyre valve threads
- ISO-9413 - Tyre valves - Dimensions and designation
- ISO-9413-1 - Tyre valves - Dimensions and designation - Amendment 1
- ISO-9413-2 - Tyre valves - Dimensions and designationAmendment 2
- ISO-9413-AM1 - Tyre valves - Dimensions and designation - Amendment 1
- PD-ISO-22638 - Rubber. Generation and collection of tyre and road wear particles (TRWP). Road simulator laboratory method
Other SDOs:
- BS-ISO-22638-TC - Tracked Changes. Rubber. Generation and collection of tyre and road wear particles (TRWP). Road simulator laboratory method
- CEN-17188 - Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
- CEN-17189 - Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
- EN-14243-1 - Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
- EN-14243-2 - Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
- EN-14243-3 - Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
- SASO-2857 - Vehicle Tires Rolling Resistance and Wet Grip Requirements
- SIS-CEN/TS-14243 - Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities
- SS-EN-14243-1 - Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
- SS-EN-14243-2 - Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
- SS-EN-14243-3 - Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
- SS-ISO-16392 - Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig (ISO 16392:2017, IDT)
- SS-ISO-22640 - Rubber - Framework for physical and chemical characterization of tyre and road wear particles (ISO 22640:2023, IDT)
- SS-ISO-28580 - Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results (ISO 28580:2018, IDT)
- SS-ISO-3877-1 - Tyres, valves and tubes - List of equivalent terms - Part 1: Tyres (ISO 3877-1:1997, IDT)
- SS-ISO-3877-2 - Tyres, valves and tubes - List of equivalent terms - Part 2: Tyre valves (ISO 3877-2:1997, IDT)
- SS-ISO-4223-1 - Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres (ISO 4223-1:2017, IDT)