Document Center List of Standards on Steels For Pressure Purposes Steels For Pressure Pipes And Tubes For Specific Use, See 77.140.75
ICS Code 77.140.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1014 - Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
- ASTM-A1017 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
- ASTM-A1048 - Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service (Withdrawn 2016)
- ASTM-A1099 - Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
- ASTM-A203 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
- ASTM-A204 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
- ASTM-A225 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
- ASTM-A240 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- ASTM-A266 - Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
- ASTM-A299 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
- ASTM-A302 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
- ASTM-A353 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
- ASTM-A387 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- ASTM-A414 - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- ASTM-A455 - Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
- ASTM-A479 - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
- ASTM-A508 - Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
- ASTM-A515 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
- ASTM-A516 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
- ASTM-A517 - Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
- ASTM-A533 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
- ASTM-A541 - Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
- ASTM-A542 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
- ASTM-A543 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
- ASTM-A562 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
- ASTM-A612 - Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
- ASTM-A645 - Standard Specification for Pressure Vessel Plates, 5 % and 5
1 2 - ASTM-A662 - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
- ASTM-A723 - Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
- ASTM-A724 - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
- ASTM-A734 - Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered (Withdrawn 2017)
- ASTM-A735 - Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service (Withdrawn 2017)
- ASTM-A736 - Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel
- ASTM-A737 - Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
- ASTM-A738 - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
- ASTM-A739 - Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
- ASTM-A765 - Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
- ASTM-A782 - Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel (Withdrawn 2010)
- ASTM-A812 - Standard Specification for Steel, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure Vessels (Withdrawn 1997)
- ASTM-A832 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
- ASTM-A836 - Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
- ASTM-A844 - Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
- ASTM-A859 - Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
- ASTM-B919 - Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
BSI:
- BS-1501-2 - Steels for pressure purposes. Specification for alloy steels: plates
- BS-1501-3 - Steels for pressure purposes. Specification for corrosion- and heat-resisting steels: plates, sheet and strip
- BS-1506 - Specification for Carbon, Low Alloy & Stainless Steel Bars Billets for Bolting Materia
- BS-1510 - Steels for Use in the Chemical, Petroleum and Allied Industries (Low Temperature Suppl
- BS-3059-1 - Steel Boiler & Superheater Tubes, Specification for Low Tensile Carbon Steel Tubes Wit
- BS-EN-10028-1 - Flat products made of steels for pressure purposes
- BS-EN-10028-2 - Flat products made of steels for pressure purposes
- BS-EN-10028-3 - Flat products made of steels for pressure purposes
- BS-EN-10028-3-TC - Tracked Changes. Flat products made of steels for pressure purposes
- BS-EN-10028-4 - Flat products made of steels for pressure purposes
- BS-EN-10028-5 - Flat products made of steels for pressure purposes
- BS-EN-10028-5-TC - Tracked Changes. Flat products made of steels for pressure purposes
- BS-EN-10028-6 - Flat products made of steels for pressure purposes
- BS-EN-10028-7 - Flat products made of steels for pressure purposes
- BS-EN-10120 - Steel sheet and strip for welded gas cylinders
- BS-EN-10207 - Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
- BS-EN-10207-TC - Tracked Changes. Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
- BS-EN-10213 - Steel castings for pressure purposes
- BS-EN-10222-1 - Steel forgings for pressure purposes
- BS-EN-10222-2 - Steel forgings for pressure purposes
- BS-EN-10222-3 - Steel forgings for pressure purposes
- BS-EN-10222-3-TC - Tracked Changes. Steel forgings for pressure purposes
- BS-EN-10222-4 - Steel forgings for pressure purposes
- BS-EN-10222-5 - Steel forgings for pressure purposes
- BS-EN-10222-5-TC - Tracked Changes. Steel forgings for pressure purposes
- BS-EN-10272 - Stainless steel bars for pressure purposes
- BS-EN-10273 - Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- BS-EN-10273-TC - Tracked Changes. Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- BS-EN-10314 - Method for the derivation of minimum values of proof strength of steel at elevated temperatures
- BS-EN-10314-TC - Tracked Changes. Method for the derivation of minimum values of proof strength of steel at elevated temperatures
- BS-EN-1503-1 - Valves. Materials for bodies, bonnets and covers
- BS-EN-1503-2 - Valves. Materials for bodies, bonnets and covers
- BS-ISO-4978 - Steel sheet and strip for welded gas cylinders
- BS-ISO-4991 - Steel castings for pressure purposes
- PD-6525-1 - Elevated temperature properties for steels for pressure purposes.
- PD-6605-1 - Guidance on methodology for assessment of stress-rupture data
- PD-6605-2 - Guidance on methodology for assessment of stress-rupture data
- PD-7777 - Alternative steel selection and its effect on design and testing of tanks to BS 7777
ISO:
- ISO-2605-3 - Steel products for pressure purposes - Derivation and verification of elevated temperature properties - Part 3 : An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- ISO-4978 - Steel sheet and strip for welded gas cylinders
- ISO-4991 - Steel castings for pressure purposes
- ISO-6303 - Pressure vessel steels not included in ISO 2604, Parts 1 to 6 - Derivation of long-time stress rupture properties
- ISO-7468 - Summary of average stress rupture properties of wrought steels for boilers and pressure vessels
- ISO-9327-1 - Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements
- ISO-9327-2 - Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties
- ISO-9327-3 - Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties
- ISO-9327-4 - Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength
- ISO-9327-5 - Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels
- ISO-9328-1 - Steel flat products for pressure purposes - Technical delivery conditions - Part 1: General requirements
- ISO-9328-2 - Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
- ISO-9328-3 - Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized
- ISO-9328-4 - Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties
- ISO-9328-5 - Steel flat products for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled
- ISO-9328-6 - Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered
- ISO-9328-7 - Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels
Other SDOs:
- DIN-EN-10028-1 - Flat products made of steels for pressure purposes - Part 1: General requirements; German version EN 10028-1:2017
- DIN-EN-10028-2 - Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2017
- DIN-EN-10028-3 - Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2017
- DIN-EN-10028-4 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties; German version EN 10028-4:2017
- DIN-EN-10028-5 - Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2017
- DIN-EN-10028-6 - Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2017
- DIN-EN-10207 - Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars; German version EN 10207:2005
- DIN-EN-10222-1 - Steel forgings for pressure purposes - Part 1: General requirements for open die forgings; German version EN 10222-1:2017
- DIN-EN-10314 - Method for the derivation of minimum values of proof strength of steel at elevated temperatures; German version EN 10314:2016
- EN-10028-1 - Flat products made of steels for pressure purposes - Part 1: General requirements
- EN-10028-2 - Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
- EN-10028-3 - Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
- EN-10028-4 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
- EN-10028-5 - Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
- EN-10028-6 - Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
- EN-10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
- EN-10120 - Steel sheet and strip for welded gas cylinders
- EN-10207 - Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
- EN-10213 - Steel castings for pressure purposes
- EN-10222-1 - Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
- EN-10222-2 - Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
- EN-10222-3 - Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
- EN-10222-4 - Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
- EN-10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
- EN-10272 - Stainless steel bars for pressure purposes
- EN-10273 - Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- EN-10314 - Method for the derivation of minimum values of proof strength of steel at elevated temperatures
- JIS-G-3103 - Carbon steel and molybdenum alloy steel plates for boilers and pressure vessels
- JIS-G-3120 - Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates quenched and tempered for pressure vessels
- JIS-G-3124 - High strength steel plates for pressure vessel for intermediate and moderate temperature service
- JIS-G-3126 - Carbon steel plates for pressure vessels for low temperature service
- SS-219711 - Stainless steels - Tubes for pressure purposes. Test category I Technical delivery requirements
- SS-219713 - Stainless steels - Tubes for pressure purposes. Test category II- Technical delivery requirements
- SS-EN-10028-1 - Flat products made of steels for pressure purposes - Part 1: General requirements
- SS-EN-10028-1-AM1 - Flat products of steels for pressure purposes - Part 1: General requirements
- SS-EN-10028-2 - Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
- SS-EN-10028-3 - Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
- SS-EN-10028-4 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
- SS-EN-10028-5 - Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
- SS-EN-10028-6 - Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
- SS-EN-10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
- SS-EN-10120 - Steel sheet and strip for welded gas cylinders
- SS-EN-10207 - Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
- SS-EN-10213 - Steel castings for pressure purposes
- SS-EN-10222-1 - Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
- SS-EN-10222-2 - Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
- SS-EN-10222-3 - Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
- SS-EN-10222-4 - Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
- SS-EN-10222-4-AM1 - Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
- SS-EN-10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
- SS-EN-10272 - Stainless steel bars for pressure purposes
- SS-EN-10273 - Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- SS-EN-10314 - Method for the derivation of minimum values of proof strength of steel at elevated temperatures
- SS-EN-12441-2 - Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
- SS-EN-12441-2-AM1 - Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
- SS-EN-12815 - Residential cookers fired by solid fuel - Requirements and test methods
- SS-EN-12960 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
- SS-EN-622-2 - Fibreboards - Specifications - Part 2: Requirements for hardboards
- SS-ENV-22605-1 - Steel products for pressure purposes - Derivationand verification of elevated temperature properties - Part 1: Yield or proof stress of carbon and low alloy steel products (ISO 2605-1:1976)
- SS-ENV-22605-2 - Steel products f"r pressure purposes - Derivationoch verification of elevated temperature properties - Part 2: Proof stress of austenitic steel products (ISO 2605-2:1976)
- SS-ENV-22605-3 - Steel products for pressure purposes - Derivationand verification of elevated temperature properties - Part 3: An alternative procedure for derivingthe elevated temperature yield or proof stress properties when data are limited (ISO 2605-3:1985)
- SS-ISO-9328-7 - Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels (ISO 9328-7:2018, IDT)