Document Center List of Standards on Nickel, Chromium And Their Alloys
ICS Code 77.120.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A481 - Standard Specification for Chromium Metal
- ASTM-A753 - Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
- ASTM-A990 - Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service
- ASTM-B160 - Standard Specification for Nickel Rod and Bar
- ASTM-B32 - Standard Specification for Solder Metal
- ASTM-B39 - Standard Specification for Nickel
- ASTM-B704 - Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
- ASTM-B705 - Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
- ASTM-B710 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
- ASTM-B719 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-
Iron-Silicon Alloy (UNS N06333) Bar - ASTM-B720 - Specification for Seamless UNS N08310 Tube (Withdrawn 1999)
- ASTM-B725 - Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
- ASTM-B726 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
- ASTM-B729 - Standard Specification for Seamless Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube
- ASTM-B730 - Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
- ASTM-B76 - Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
- ASTM-B78 - Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
- ASTM-B841 - Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
- ASTM-B880 - Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
- ASTM-B924 - Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
- ASTM-D1977 - Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
- ASTM-D6714 - Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
- ASTM-E107 - Standard Test Methods for Chemical Analysis of Electronic Nickel (Withdrawn 2003)
- ASTM-E1473 - Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
- ASTM-E1587 - Standard Test Methods for Chemical Analysis of Refined Nickel
- ASTM-E1834 - Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
- ASTM-E1835 - Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
- ASTM-E1917 - Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
- ASTM-E1938 - Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
- ASTM-E2594 - Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)
- ASTM-E2823 - Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
- ASTM-E3047 - Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
- ASTM-E353 - Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
- ASTM-E38 - Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989)
- ASTM-E76 - Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
- ASTM-E963 - Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte (Withdrawn 2018)
- ASTM-F15 - Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
- ASTM-F1684 - Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
- ASTM-F2004 - Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM-F2005 - Standard Terminology for Nickel-Titanium Shape Memory Alloys
- ASTM-F2516 - Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
- ASTM-F30 - Standard Specification for Iron-Nickel Sealing Alloys (Withdrawn 2024)
- ASTM-F31 - Standard Specification for Nickel-Chromium-Iron Sealing Alloys
- ASTM-F3213 - Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
- ASTM-G28 - Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
BSI:
- BS-3727-1 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-10 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-11 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-12 - Methods for the analysis of nickel for use in electronic tubes and valves. Determination of sulphur (combustion method)
- BS-3727-13 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-14 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-15 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-16 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-2 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-20 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-21 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-22 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-3 - Methods for the analysis of nickel for use in electronic tubes and valves. Determination of carbon
- BS-3727-4 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-5 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-6 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-7 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-8 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-3727-9 - Methods for the analysis of nickel for use in electronic tubes and valves
- BS-375 - Specification for refined nickel
- BS-7455-1 - Analysis of nickel alloys by flame atomic absorption spectrometry. General requirements and sample dissolution
- BS-7455-2 - Analysis of nickel alloys by flame atomic absorption spectrometry
- BS-7455-3 - Analysis of nickel alloys by flame atomic absorption spectrometry
- BS-7455-4 - Analysis of nickel alloys by flame atomic absorption spectrometry
- BS-7455-5 - Analysis of nickel alloys by flame atomic absorption spectrometry
- BS-7455-6 - Analysis of nickel alloys by flame atomic absorption spectrometry
- BS-EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- BS-EN-ISO-7526 - Ferronickels. Determination of sulfur content. Infrared absorption method after induction furnace combustion
- BS-ISO-11400 - Nickel, ferronickels and nickel alloys. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method
- BS-ISO-11433 - Nickel alloys. Determination of titanium content. Diantipyrylmethane molecular absorption spectrometric method
- BS-ISO-11437 - Nickel alloys. Determination of lead. Electrothermal atomic absorption spectrometric method
- BS-ISO-6372 - Nickel and nickel alloys. Terms and definitions
- BS-ISO-7524 - Ferronickels. Determination of carbon content. Infrared absorption method after induction furnace combustion
- BS-ISO-7530-1 - Nickel alloys. Flame atomic absorption spectrometric analysis
- PD-ISO-4644 - Nickels, ferronickels and nickel alloys. Standards for the determination of chemical composition
ISO:
- ISO-11400 - Nickel, ferronickels and nickel alloys - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method
- ISO-11433 - Nickel alloys - Determination of titanium content - Diantipyrylmethane molecular absorption method
- ISO-11433-AM1 - - Amendment 1: Alternative procedure for the preparation of the titanium standard solution
- ISO-11435 - Nickel alloys - Determination of molybdenum content - Inductively coupled plasma/atomic emission spectrometric method
- ISO-11436 - Nickel and nickel alloys - Determination of total boron content - Curcumin molecular absorption spectrometric method
- ISO-11437 - Nickel alloys - Determination of lead - Electrothermal atomic absorption spectrometric method
- ISO-11437-1 - Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 1: General requirements and sample dissolution
- ISO-11437-2 - Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 2: Determination of lead content
- ISO-12169 - Nickel oxide - Determination of nickel content - Electrolytic deposition method
- ISO-18223 - Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric method
- ISO-22033 - Nickel alloys - Determination of niobium - Inductively coupled plasma/atomic emission spectrometric method
- ISO-22725 - Nickel alloys - Determination of tantalum - Inductively coupled plasma atomic emission spectrometric method
- ISO-23156 - Ferronickels - Determination of phosphorus, manganese, chromium, copper and cobalt contents - Inductively coupled plasma optical emission spectrometric method
- ISO-23166 - Nickel alloys - Determination of tantalum - Inductively coupled plasma optical emission spectrometric method
- ISO-4644 - Nickels, ferronickels and nickel alloys - Standards for the determination of chemical composition
- ISO-6283 - Refined nickel
- ISO-6351 - Nickel - Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc contents - Flame atomic absorption spectrometric method
- ISO-6372 - Nickel and nickel alloys - Terms and definitions
- ISO-6372-1 - Nickel and nickel alloys - Terms and definitions - Part 1: Materials
- ISO-6372-2 - Nickel and nickel alloys - Terms and definitions - Part 2: Refinery products
- ISO-7156 - Refined nickel - Sampling
- ISO-7523 - Nickel - Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents - Electrothermal atomic absorption spectrometric method
- ISO-7524 - Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
- ISO-7525 - Nickel - Determination of sulfur content - Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide
- ISO-7526 - Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
- ISO-7527 - Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
- ISO-7528 - Nickel alloys - Determination of iron content - Titrimetric method with potassium dichromate
- ISO-7529 - Nickel alloys - Determination of chromium content - Potentiometric titration method with ammonium iron(II) sulfate
- ISO-7530-1 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 1: Determination of cobalt, chromium, copper, iron and manganese
- ISO-7530-2 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 2: Determination of cobalt content
- ISO-7530-3 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 3: Determination of chromium content
- ISO-7530-4 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 4: Determination of copper content
- ISO-7530-5 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 5: Determination of iron content
- ISO-7530-6 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 6: Determination of manganese content
- ISO-7530-7 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 7: Determination of aluminium content
- ISO-7530-8 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 8: Determination of silicon content
- ISO-7530-9 - Nickel alloys - Flame atomic absorption spectrometric analysis - Part 9: Determination of vanadium content
- ISO-9388 - Nickel alloys - Determination of phosphorus content - Molybdenum blue molecular absorption spectrometric method
Other SDOs:
- DIN-EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:2013
- EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- JIS-H-1270 - General rules for chemical analysis of nickel and nickel alloys
- JIS-H-8617 - Electroplated coatings of nickel and chromium
- SIS-ISO/TS-18223 - Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric method
- SS-EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- SS-EN-10269-AM1 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- SS-EN-27526 - Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infrared absorption method after induction furnace combustion
- SS-EN-27527 - Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
- SS-EN-ISO-10360-6 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
- SS-EN-ISO-7096 - Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
- SS-EN-ISO-7526 - Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)
- SS-ISO-11433 - Nickel alloys Determination of titanium content Diantipyrylmethane molecular absorption method (ISO 11433:2020, IDT)
- SS-ISO-22033 - Nickel alloys - Determination of niobium - Inductively coupled plasma/atomic emission spectrometric method (ISO 22033:2011, IDT)