Document Center List of Standards on Other Equipment For Petroleum And Natural Gas Industries
ICS Code 75.180.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D6104 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
- ASTM-D6157 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
BSI:
- BS-1414 - Specification for Steel Wedge Gate Valves (Flanged & butt-Welding Ends) for the Petrol
- BS-1435-1 - Rubber Hose Assemblies for Oil Suction & Discharge Services, Specification for the Ass
- BS-1435-2 - Rubber hose assemblies for oil suction and discharge services
- BS-1552 - Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
- BS-1600 - Specification for dimensions of steel pipe for the petroleum industry
- BS-1640-1 - Specification for Steel butt-Welding Pipe Fittings for the Petroleum Industry. Wrought Carbon and Ferritic Alloy Steel Fittings
- BS-1640-2 - ANSI B16.9; ANSI B16.28; ASTM a 234; ASTM a 351; ASTM a 403;ASTM a 420; Mss Sp-43Wroug
- BS-1640-3 - Specification for Steel butt-Welding Pipe Fittings for the Petroleum Industry. Wrought Carbon and Ferritic Alloy Steel Fittings. Metric Units
- BS-1640-4 - ANSI B16.9; ANSI B16.28; ASTM a 234; ASTM a 351; ASTM a 403;ASTM a 420; Mss Sp-43Wroug
- BS-1868 - Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
- BS-1873 - Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
- BS-2464 - Specification for hose couplings for petrol, oil and lubricants ( in. to 4 in. nominal sizes)
- BS-2464-2 - Specification for hose couplings for petrol, oil and lubricants. High pressure couplings
- BS-2464-3 - Specification for hose couplings for petrol, oil and lubricants. Quick-acting couplings
- BS-2464-4 - Hose couplings for petrol, oil and lubricants. Specification for 100 mm quick-acting couplings: European type
- BS-3016 - Specification for pressure regulators for liquefied petroleum gases
- BS-3212 - Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations
- BS-3293 - Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
- BS-3492 - Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels
- BS-3799 - Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
- BS-5173-102.3 - Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests
- BS-5351 - Specification for steel ball valves for the petroleum, petrochemical and allied industries
- BS-7336 - Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels
- BS-7838 - Specification for Corrugated Stainless Steel Semi-Rigid Pipe and Associated Fittings for Low-Pressure Gas Pipework of Up To DN 50
- BS-7959-1 - Materials used for the control of liquid spillages
- BS-7959-2 - Materials used for the control of liquid spillages
- BS-7959-3 - Materials used for the control of liquid spillages
- BS-EN-ISO-13691 - Petroleum and natural gas industries. High-speed special-purpose gear units
- BS-EN-ISO-15547 - Petroleum & Natural Gas Industries, Plate Heat Exchangers
Other SDOs:
- SS-EN-ISO-13503-1 - Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids (ISO 13503-1:2011)
- SS-EN-ISO-13503-2 - Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO 13503-2:2006)
- SS-EN-ISO-13503-2-AM1 - Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppand specification (ISO 13503-2:2006/Amd 1:2009)
- SS-EN-ISO-13503-3 - Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2022)
- SS-EN-ISO-13503-4 - Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions (ISO 13503-4:2006)
- SS-EN-ISO-13503-5 - Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)