Document Center List of Standards on Exploratory, Drilling And Extraction Equipment Including Offshore Structures
ICS Code 75.180.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1099 - Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
- ASTM-E1739 - Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites (Withdrawn 2024)
- ASTM-E1912 - Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases (Withdrawn 2013)
- ASTM-E2928 - Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
- ASTM-F1990 - Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
- ASTM-F2067 - Standard Practice for Development and Use of Oil-Spill Trajectory Models
- ASTM-F3257 - Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations
- ASTM-PS3 - Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases (Withdrawn 1998)
BSI:
- BS-EN-10300 - Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating
- BS-EN-10301 - Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
- BS-EN-13173 - Cathodic protection for steel offshore floating structures
- BS-EN-16808 - Petroleum, petrochemical and natural gas industries. Safety of machineries. Manual elevators
- BS-EN-ISO-10405 - Petroleum and natural gas industries. Care and use of casing and tubing
- BS-EN-ISO-10407-2 - Petroleum and natural gas industries. Rotary drilling equipment
- BS-EN-ISO-10414-1 - Petroleum and natural gas industries. Field testing of drilling fluids
- BS-EN-ISO-10416 - Petroleum and natural gas industries. Drilling fluids. Laboratory testing
- BS-EN-ISO-10417 - Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress
- BS-EN-ISO-10418 - Petroleum and natural gas industries. Offshore production installations. Process safety systems
- BS-EN-ISO-10423 - Petroleum and natural gas industries. Drilling and production equipment. Wellhead and tree equipment
- BS-EN-ISO-10424-1 - Petroleum and natural gas industries. Rotary drilling equipment
- BS-EN-ISO-10424-2 - Petroleum and natural gas industries. Rotary drilling equipment
- BS-EN-ISO-10427-1 - Petroleum and natural gas industries. Casing centralizers
- BS-EN-ISO-10427-2 - Petroleum and natural gas industries. Equipment for well cementing
- BS-EN-ISO-10427-3 - Petroleum and natural gas industries. Equipment for well cementing
- BS-EN-ISO-10432 - Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
- BS-EN-ISO-10855-1 - Offshore containers and associated lifting sets
- BS-EN-ISO-10855-2 - Offshore containers and associated lifting sets
- BS-EN-ISO-10855-3 - Offshore containers and associated lifting sets
- BS-EN-ISO-11960 - Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
- BS-EN-ISO-11961 - Petroleum and natural gas industries. Steel drill pipe
- BS-EN-ISO-12736 - Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
- BS-EN-ISO-12736-1 - Oil and gas industries including lower carbon energy. Wet thermal insulation systems for pipelines and subsea equipment
- BS-EN-ISO-12736-2 - Oil and gas industries including lower carbon energy. Wet thermal insulation systems for pipelines and subsea equipment
- BS-EN-ISO-12736-3 - Oil and gas industries including lower carbon energy. Wet thermal insulation systems for pipelines and subsea equipment
- BS-EN-ISO-13085 - Petroleum and natural gas industries. Aluminium alloy pipe for use as tubing for wells
- BS-EN-ISO-13354 - Petroleum and natural gas industries. Drilling and production equipment. Shallow gas diverter equipment
- BS-EN-ISO-13500 - Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
- BS-EN-ISO-13501 - Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation
- BS-EN-ISO-13533 - Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
- BS-EN-ISO-13534 - Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and re-manufacture of hoisting equipment
- BS-EN-ISO-13535 - Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment
- BS-EN-ISO-13624-1 - Petroleum and natural gas industries. Drilling and production equipment
- BS-EN-ISO-13625 - Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
- BS-EN-ISO-13626 - Petroleum and natural gas industries. Drilling and production equipment. Drilling and well-servicing structures
- BS-EN-ISO-13628-1 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-10 - Petroleum and natural gas industries. Design and operation of subseaprod uction systems
- BS-EN-ISO-13628-15 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-2 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-3 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-4 - Petroleum and natural gas Industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-5 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-6 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-7 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-8 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13628-9 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-EN-ISO-13678 - Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
- BS-EN-ISO-13679 - Petroleum and natural gas industries. Procedures for testing casing and tubing connections
- BS-EN-ISO-13680 - Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material. Technical delivery conditions
- BS-EN-ISO-13702 - Oil and gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
- BS-EN-ISO-13702-TC - Tracked Changes. Oil and gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
- BS-EN-ISO-13703 - Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms
- BS-EN-ISO-13703-2 - Oil and gas industries including lower carbon energy. Piping systems on offshore platforms and onshore plants
- BS-EN-ISO-13703-3 - Oil and gas industries including lower carbon energy. Piping systems on offshore production platforms and onshore plants
- BS-EN-ISO-13703-3-TC - Tracked Changes. Oil and gas industries including lower carbon energy. Piping systems on offshore production platforms and onshore plants
- BS-EN-ISO-13819-1 - Petroleum and natural gas industries. Offshore structures
- BS-EN-ISO-14310 - Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
- BS-EN-ISO-14693 - Petroleum and natural gas industries. Drilling and well-servicing equipment
- BS-EN-ISO-14998 - Petroleum and natural gas industries. Downhole equipment. Completion accessories
- BS-EN-ISO-15136-1 - Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift
- BS-EN-ISO-15136-2 - Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift
- BS-EN-ISO-15138 - Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning
- BS-EN-ISO-15138-TC - Tracked Changes. Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning
- BS-EN-ISO-15156-2 - Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production
- BS-EN-ISO-15156-3 - Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production
- BS-EN-ISO-15463 - Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe
- BS-EN-ISO-15544 - Oil and gas industries. Offshore production installations. Requirements and guidelines for emergency response
- BS-EN-ISO-15544-TC - Tracked Changes. Oil and gas industries. Offshore production installations. Requirements and guidelines for emergency response
- BS-EN-ISO-15546 - Petroleum and natural gas industries. Aluminium alloy drill pipe
- BS-EN-ISO-15551 - Petroleum and natural gas industries. Drilling and production equipment. Electric submersible pump systems for artificial lift
- BS-EN-ISO-15551-1 - Petroleum and natural gas industries. Drilling and production equipment
- BS-EN-ISO-15551-TC - Tracked Changes. Petroleum and natural gas industries. Drilling and production equipment. Electric submersible pump systems for artificial lift
- BS-EN-ISO-16070 - Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
- BS-EN-ISO-16530-1 - Petroleum and natural gas industries. Well integrity
- BS-EN-ISO-17078-1 - Petroleum and natural gas industries. Drilling and production equipment
- BS-EN-ISO-17078-2 - Petroleum and natural gas industries. Drilling and production equipment
- BS-EN-ISO-17078-3 - Petroleum and natural gas industries. Drilling and production equipment
- BS-EN-ISO-17078-4 - Petroleum and natural gas industries. Drilling and production equipment
- BS-EN-ISO-17776 - Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations
- BS-EN-ISO-17824 - Petroleum and natural gas industries. Downhole equipment. Sand screens
- BS-EN-ISO-17945 - Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
- BS-EN-ISO-18647 - Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
- BS-EN-ISO-18797-1 - Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings
- BS-EN-ISO-18797-2 - Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings
- BS-EN-ISO-19900 - Petroleum and natural gas industries. General requirements for offshore structures
- BS-EN-ISO-19901-1 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-10 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-10-TC - Tracked Changes. Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-1-TC - Tracked Changes. Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-2-TC - Tracked Changes. Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-3 - Oil and gas industries including lower carbon energy. Specific requirements for offshore structures
- BS-EN-ISO-19901-4 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-4-TC - Tracked Changes. Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-5 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-5-TC - Tracked Changes. Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-6 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-7 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-8 - Oil and gas industries including lower carbon energy. Offshore structures
- BS-EN-ISO-19901-8-TC - Tracked Changes. Oil and gas industries including lower carbon energy. Offshore structures
- BS-EN-ISO-19901-9 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19902 - Petroleum and natural gas industries. Fixed steel offshore structures
- BS-EN-ISO-19903 - Petroleum and natural gas industries. Concrete offshore structures
- BS-EN-ISO-19904-1 - Petroleum and natural gas industries. Floating offshore structures
- BS-EN-ISO-19905-1 - Oil and gas industries including lower carbon energy. Site-specific assessment of mobile offshore units
- BS-EN-ISO-19905-1-TC - Tracked Changes. Petroleum and natural gas industries. Site-specific assessment of mobile offshore units
- BS-EN-ISO-19905-3 - Petroleum and natural gas industries. Site-specific assessment of mobile offshore units
- BS-EN-ISO-20312 - Petroleum and natural gas industries. Design and operating limits of drill strings with aluminium alloy components
- BS-EN-ISO-20321 - Petroleum, petrochemical and natural gas industries. Safety of machineries. Powered elevators
- BS-EN-ISO-24200 - Petroleum, petrochemical and natural gas industries - Bulk material for offshore projects - Pipe support (ISO 24200:2022)
- BS-EN-ISO-27627 - Petroleum and natural gas industries. Aluminium alloy drill pipe thread connection gauging
- BS-EN-ISO-28781 - Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
- BS-EN-ISO-3421 - Petroleum and natural gas industries. Drilling and production equipment. Offshore conductor design, setting depth and installation
- BS-EN-ISO-3977-5 - Gas turbines. Procurement
- BS-IEC-61892-1 - Mobile and fixed offshore units. Electrical installations
- BS-IEC-61892-2 - Mobile and fixed offshore units. Electrical installations
- BS-IEC-61892-3 - Mobile and fixed offshore units. Electrical installations
- BS-IEC-61892-5 - Mobile and fixed offshore units. Electrical installations
- BS-IEC-61892-7 - Mobile and fixed offshore units. Electrical installations
- BS-ISO-10405 - Petroleum and Natural Gas Industries - Care and Use of Casing and Tubing
- BS-ISO-10414-1 - Petroleum and natural gas industries. Field testing of drilling fluids
- BS-ISO-10414-2 - Petroleum and natural gas industries. Field testing of drilling fluids
- BS-ISO-10416 - Petroleum & Natural Gas Industries, Drilling Fluids, Laboratory Testing
- BS-ISO-10425 - Steel wire ropes for the petroleum and natural gas industries. Minimum requirements and terms of acceptance
- BS-ISO-13628-10 - Petroleum & Natural Gas Industries, Design & Operation of Subseaproduction Systems, Sp
- BS-ISO-13628-11 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-ISO-13628-5 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-ISO-13628-6 - Petroleum and natural gas industries. Design and operation of subsea production systems
- BS-ISO-13628-7 - Petroleum & Natural Gas Industries, Design & Operation of Subsea Production Systems, C
- BS-ISO-13628-8 - Petroleum & Natural Gas Industries, Design & Operation of Subsea Production Systems, R
- BS-ISO-13628-9 - Remotely Operated Tool (Rot) Intervention Systems
- BS-ISO-13678 - Petroleum & Natural Gas Industries, Evaluation & Testing of Thread Compounds for Use
- BS-ISO-13679 - Petroleum & Natural Gas Industries, Procedures for Testing Casing & Tubing Connections
- BS-ISO-13680 - Petroleum & Natural Gas Industries, Corrosion, Resistant Alloy Seamless Tubes for Use
- BS-ISO-15544 - Petroleum & Natural Gas Industries, Offshore Production Installations, Requirements &
- BS-ISO-17824 - Petroleum and natural gas industries. Downhole equipment. Sand screens
- BS-ISO-18165 - Petroleum & Natural Gas Industries, Performance Testing of Cementing Float Equipment
- BS-ISO-18647 - Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
- BS-ISO-18797-1 - Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings. Elastomeric coating systems-polychloroprene or EPDM
- BS-ISO-19904-1 - Petroleum & Natural Gas Industries, Floating Offshore Structures, Monohulls, Semi-Subm
- BS-ISO-19905-3 - Petroleum and natural gas industries. Site-specific assessment of mobile offshore units
- BS-ISO-24202 - Oil and gas industries including lower carbon energy. Bulk material for offshore projects. Monorail beam and padeye.
- DD-CEN-ISO-27469 - Petroleum, petrochemical and natural gas industries. Method of test for fire dampers
- DD-ISO-27469 - Petroleum, Petrochemical & Natural Gas Industries, Method of Test for Fire Dampers
- PD-CEN-ISO-10400-TC - Tracked Changes. Petroleum and natural gas industries. Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
- PD-CEN-ISO-13624-2 - Petroleum and natural gas industries. Drilling and production equipment
- PD-CEN-ISO-16530-2 - Well integrity
- PD-CEN-ISO-19905-2 - Petroleum and natural gas industries. Site-specific assessment of mobile offshore units
- PD-ISO-10400 - Petroleum & Natural Gas Industries, Equations & Calculations for the Properties of Cas
- PD-ISO-12835 - Qualification of casing connections for thermal wells
- PD-ISO-12835-TC - Tracked Changes. Qualification of casing connections for thermal wells
- PD-ISO-13624-2 - Petroleum & Natural Gas Industries, Drilling & Production Equipment, Deepwater Drillin
ISO:
- ISO-10400 - Petroleum and natural gas industries - Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
- ISO-10405 - Petroleum and natural gas industries - Care and use of casing and tubing
- ISO-10407 - Petroleum and natural gas industries -- Drilling and production equipment -- Drill stem design and operating limits
- ISO-10407-2 - Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Inspection and classification of used drill stem elements
- ISO-10414-1 - Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
- ISO-10414-2 - Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids
- ISO-10416 - Petroleum and natural gas industries - Drilling fluids - Laboratory testing
- ISO-10417 - Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
- ISO-10418 - Petroleum and natural gas industries - Offshore production installations - Process safety systems
- ISO-10423 - Petroleum and natural gas industries - Drilling and production equipment - Wellhead and tree equipment
- ISO-10424-1 - Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements
- ISO-10424-2 - Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections
- ISO-10425 - Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
- ISO-10427-1 - Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers
- ISO-10427-2 - Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing
- ISO-10427-3 - Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment
- ISO-10428 - Petroleum and natural gas industries -- Sucker rods (pony rods, polished rods, couplings and sub-couplings) -- Specification
- ISO-10431 - Petroleum and natural gas industries -- Pumping units -- Specification
- ISO-10432 - Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
- ISO-10855-1 - Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers
- ISO-10855-2 - Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets
- ISO-10855-3 - Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing
- ISO-11960 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
- ISO-11961 - Petroleum and natural gas industries - Steel drill pipe
- ISO-11961-AM1 - - Amendment 1
- ISO-12736 - Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
- ISO-12736-1 - Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 1: Validation of materials and insulation systems
- ISO-12736-2 - Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 2: Qualification processes for production and application procedures
- ISO-12736-3 - Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 3: Interfaces between systems, field joint systems, field repairs and pre-fabricated insulation
- ISO-12835 - Qualification of casing connections for thermal wells
- ISO-13085 - Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells
- ISO-13354 - Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment
- ISO-13500 - Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
- ISO-13500-AM1 - Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1: Barite 4,1
- ISO-13501 - Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation
- ISO-13533 - Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
- ISO-13534 - Petroleum and natural gas industries -- Drilling and production equipment -- Inspection, maintenance, repair and remanufacture of hoisting equipment
- ISO-13535 - Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment
- ISO-13624-1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment
- ISO-13624-2 - Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report
- ISO-13625 - Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings
- ISO-13626 - Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
- ISO-13628-1 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations
- ISO-13628-10 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
- ISO-13628-11 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications
- ISO-13628-15 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds
- ISO-13628-1-AM1 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 1: Revised Clause 6
- ISO-13628-2 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications
- ISO-13628-3 - Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems
- ISO-13628-4 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
- ISO-13628-5 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
- ISO-13628-6 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems
- ISO-13628-7 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
- ISO-13628-8 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
- ISO-13628-9 - Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems
- ISO-13678 - Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
- ISO-13679 - Petroleum and natural gas industries - Procedures for testing casing and tubing connections
- ISO-13680 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions
- ISO-13702 - Oil and gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
- ISO-13703 - Petroleum and natural gas industries -- Design and installation of piping systems on offshore production platforms
- ISO-13703-2 - Oil and gas industries including lower carbon energy - Piping systems on offshore platforms and onshore plants - Part 2: Materials
- ISO-13703-3 - Oil and gas industries including lower carbon energy - Piping systems on offshore production platforms and onshore plants - Part 3: Fabrication
- ISO-13819-2 - Petroleum and natural gas industries -- Offshore structures -- Part 2: Fixed steel structures
- ISO-14310 - Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
- ISO-14693 - Petroleum and natural gas industries - Drilling and well-servicing equipment
- ISO-14998 - Petroleum and natural gas industries - Downhole equipment - Completion accessories
- ISO-15136-1 - Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps
- ISO-15136-2 - Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems
- ISO-15138 - Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
- ISO-15463 - Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
- ISO-15544 - Oil and gas industries - Offshore production installations - Requirements and guidelines for emergency response
- ISO-15544-1 - Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response - Amendment 1
- ISO-15546 - Petroleum and natural gas industries - Aluminium alloy drill pipe
- ISO-15551 - Petroleum and natural gas industries - Drilling and production equipment - Electric submersible pump systems for artificial lift
- ISO-15551-1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift
- ISO-16070 - Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
- ISO-16530-1 - Petroleum and natural gas industries - Well integrity - Part 1: Life cycle governance
- ISO-16530-2 - Well integrity - Part 2: Well integrity for the operational phase
- ISO-17078-1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels
- ISO-17078-1/AM1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels - Amendment 1
- ISO-17078-2 - Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels
- ISO-17078-3 - Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
- ISO-17078-4 - Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment
- ISO-17776 - Petroleum and natural gas industries - Offshore production installations - Major accident hazard management during the design of new installations
- ISO-17824 - Petroleum and natural gas industries - Downhole equipment - Sand screens
- ISO-17945 - Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
- ISO-18647 - Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms
- ISO-18797-1 - Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM
- ISO-18797-2 - Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 2: Maintenance and field repair coatings for riser pipes
- ISO-19900 - Petroleum and natural gas industries - General requirements for offshore structures
- ISO-19901-1 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
- ISO-19901-10 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 10: Marine geophysical investigations
- ISO-19901-2 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria
- ISO-19901-3 - Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 3: Topsides structure
- ISO-19901-4 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations
- ISO-19901-5 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight management
- ISO-19901-6 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations
- ISO-19901-7 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
- ISO-19901-8 - Oil and gas industries including lower carbon energy - Offshore structures - Part 8: Marine soil investigations
- ISO-19901-9 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 9: Structural integrity management
- ISO-19902 - Petroleum and natural gas industries - Fixed steel offshore structures
- ISO-19902-AM1 - - Amendment 1
- ISO-19903 - Petroleum and natural gas industries - Concrete offshore structures
- ISO-19904-1 - Petroleum and natural gas industries - Floating offshore structures - Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures
- ISO-19905-1 - Oil and gas industries including lower carbon energy - Site-specific assessment of mobile offshore units - Part 1: Jack-ups: elevated at a site
- ISO-19905-2 - Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 2: Jack-ups commentary and detailed sample calculation
- ISO-19905-3 - Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 3: Floating units
- ISO-19906 - Petroleum and natural gas industries - Arctic offshore structures
- ISO-20312 - Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components
- ISO-20321 - Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered elevators
- ISO-24200 - Petroleum, petrochemical and natural gas industries - Bulk material for offshore projects - Pipe support
- ISO-24202 - Oil and gas industries including lower carbon energy - Bulk material for offshore projects - Monorail beam and padeye
- ISO-27469 - Petroleum, petrochemical and natural gas industries - Method of test for fire dampers
- ISO-27627 - Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging
- ISO-28781 - Petroleum and natural gas industries - Drilling and production equipment -Subsurface barrier valves and related equipment
- ISO-3421 - Petroleum and natural gas industries - Drilling and production equipment - Offshore conductor design, setting depth and installation
- ISO-3977-5 - Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
- ISO-6398-1 - Oil and gas industries including lower carbon energy - Submersible linear motor systems for artificial lift - Part 1: Submersible linear motor
- ISO-6807 - Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification
- ISO/PAS-12835 - Qualification of casing connections for thermal wells
- ISO/PAS-24565 - Petroleum and natural gas industries - Ceramic lined tubing
Other SDOs:
- DIN-EN-10300 - Steel Tubes & Fittings for Onshore & Offshore Pipelines - Bituminous Hot Applied Mater
- DIN-EN-ISO-15136-1 - Part 1: Pumps, Petroleum & Natural Gas Industries - Progressing Cavity Pump Systems Fo
- DIN-EN-ISO-17776 - Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations
- DIN-EN-ISO-3977-5 - Part 5: Applications for Petroleum & Natural Gas Industries, Gas Turbines - Procuremen
- DIN-EN-ISO-6807 - Rubber Hoses & Hose Assemblies for Rotary Drilling & Vibration Applications, Specifica
- EN-10300 - Steel Tubes & Fittings for Onshore & Offshore Pipelines - Bituminous Hot Applied Mater
- EN-10301 - Steel Tubes & Fittings for on & Offshore Pipelines, Internal Coating for the Reduction
- EN-ISO-10405 - Petroleum & Natural Gas Industries - Care 7 Use of Casing & Tubing
- EN-ISO-10407-2 - Part 2: Inspection & Classification of Used Drill Stem Elements, Petroleum & Natural G
- EN-ISO-10414-1 - Part 1: Water-Based Fluids, Petroleum & Natural Gas Industries - Field Testing of Dril
- EN-ISO-10414-2 - Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids
- EN-ISO-10416 - Petroleum & Natural Gas Industries - Drilling Fluids - Laboratory Testing
- EN-ISO-10423 - Petroleum & Natural Gas Industries - Drilling & Production Equipment - Wellhead & Chri
- EN-ISO-10424-2 - Part 2: Threading & Gauging of Rotary Shouldered Thread Connections, Petroleum & Natur
- EN-ISO-10427-1 - Petroleum & Natural Gas Industries, Casing Centralizers, Bow-Spring Casing Centralizer
- EN-ISO-10427-2 - Petroleum & Natural Gas Industries, Equipment for Well Cementing, Centralizer Placemen
- EN-ISO-10855-1 - Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
- EN-ISO-10855-2 - Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018)
- EN-ISO-10855-3 - Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing
- EN-ISO-11960 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014)
- EN-ISO-11961 - Petroleum & Natural Gas Industries - Steel Drill Pipe
- EN-ISO-12736 - Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
- EN-ISO-13085 - Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)
- EN-ISO-13354 - Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment
- EN-ISO-13501 - Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation
- EN-ISO-13533 - Petroleum & Natural Gas Industries, Drilling & Production Equipment, Drill-Through Equ
- EN-ISO-13624-1 - Part 1: Design & Operation of Marine Drilling Riser Equipment, Petroleum & Natural Gas
- EN-ISO-13628-1 - Part 1: General Requirements & Recommendations, Petroleum & Natural Gas Industries -
- EN-ISO-13628-10 - Part 10: Specification for Bonded Flexible Pipe, Petroleum & Natural Gas Industries -
- EN-ISO-13628-15 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds
- EN-ISO-13628-4 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
- EN-ISO-13628-7 - Part 7: Completion/Worker Riser Systems, Petroleum & Natural Gas Industries - Design &
- EN-ISO-13628-8 - Part 8: Remotely Operated Vehicle (Rov) Interfaces on Subsea Production Systems, Petro
- EN-ISO-13628-9 - Part 9: Remotely Operated Tool (Rot) Intervention Systems, Petroleum & Natural Gas Ind
- EN-ISO-13678 - Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements (ISO 13678:2010)
- EN-ISO-13679 - Petroleum & Natural Gas Industries, Procedures for Testing Casing & Tubing Connections
- EN-ISO-13702 - Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
- EN-ISO-13703 - Petroleum & Natural Gas Industries, Design & Installation of Piping Systems on Offshor
- EN-ISO-14310 - Petroleum & Natural Gas Industries - Downhole Equipment - Packers & Bridge Plugs
- EN-ISO-14998 - Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013)
- EN-ISO-15136-1 - Petroleum & Natural Gas Industries, Progressing Cavity Pump Systems for Artificial Li
- EN-ISO-15138 - Petroleum & Natural Gas Industries, Offshore Production Installations, Heating, Ventil
- EN-ISO-15156-2 - Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons
- EN-ISO-15156-3 - Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
- EN-ISO-15463 - Petroleum & Natural Gas Industries - Field Inspection of New Casing, Tubing & Plain-En
- EN-ISO-15544 - Petroleum & Natural Gas Industries - Offshore Production Installations - Requirements
- EN-ISO-15546 - Petroleum and natural gas industries - Aluminium alloy drill pipe
- EN-ISO-15551-1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift
- EN-ISO-16070 - Petroleum & Natural Gas Industries, Downhole Equipment, Lock Mandrels & Landing Nipple
- EN-ISO-16530-1 - Petroleum and natural gas industries - Well integrity - Part 1: Life cycle governance
- EN-ISO-17078-2 - Part 2: Flow Control Devices for Side-Pocket Mandrels, Petroleum & Natural Gas Industr
- EN-ISO-17078-3 - Part 3: Running Tools, Pulling Tools & Kick-Over Tools & Latches for Side-Pocket Mandr
- EN-ISO-17078-4 - Part 4: Practices for Side-Pocket Mandrels & Related Equipment, Petroleum & Natural Ga
- EN-ISO-17776 - Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations
- EN-ISO-17824 - Petroleum and natural gas industries - Downhole equipment - Sand screens
- EN-ISO-17945 - Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
- EN-ISO-18797-1 - Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings. Elastomeric coating systems-polychloroprene or EPDM
- EN-ISO-19900 - Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2013)
- EN-ISO-19901-1 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
- EN-ISO-19901-2 - Petroleum and natural gas industries. Specific requirements for offshore structures. Seismic design procedures and criteria
- EN-ISO-19901-3 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure
- EN-ISO-19901-4 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations
- EN-ISO-19901-5 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction
- EN-ISO-19901-6 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (ISO 19901-6:2009)
- EN-ISO-19901-7 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2013)
- EN-ISO-19901-8 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 8: Marine soil investigations
- EN-ISO-19902 - Petroleum and natural gas industries - Fixed steel offshore structures (ISO 19902:2007/Amd 1:2013)
- EN-ISO-19903 - Petroleum & Natural Gas Industries, Fixed Concrete Offshore Structures
- EN-ISO-19904-1 - Part 1: Monohulls, Semisubmersibles & Spars, Petroleum & Natural Gas Industries - Floa
- EN-ISO-19905-1 - Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 1: Jack-ups
- EN-ISO-20312 - Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components
- EN-ISO-27627 - Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging (ISO 27627:2014)
- EN-ISO-28781 - Petroleum & Natural Gas Industries - Drilling & Production Equipment - Subsurface Barr
- EN-ISO-3977-5 - Part 5: Applications for Petroleum & Natural Gas Industries, Gas Turbines - Procuremen
- EN-ISO-6807 - Rubber Hoses & Hose Assemblies for Rotary Drilling & Vibration Applications, Specifica
- NORSOK-N-001 - Integrity of Offshore Structures
- SIS-CEN-ISO/TR-10400 - Petroleum and natural gas industries - Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2018)
- SIS-CEN-ISO/TS-17575-3 - Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data - Technical Corrigendum 1 (ISO/TS 17575-3:2011/Cor 1:2013)
- SS-EN-10300 - Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
- SS-EN-10301 - Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
- SS-EN-12697-5 - Bituminous mixtures - Test methods - Part 5: Determination of the maximum density
- SS-EN-13225 - Precast concrete products - Linear structural elements
- SS-EN-14915 - Solid wood panelling and cladding - Characteristics, requirements and marking
- SS-EN-1656 - Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
- SS-EN-16808 - Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators
- SS-EN-3687 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 degrees Celsius
- SS-EN-54-25 - Fire detection and fire alarm systems - Part 25: Components using radio links
- SS-EN-ISO-10405 - Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2000)
- SS-EN-ISO-10407-2 - Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Inspection and classification of used drill stem elements (ISO 10407-2:2008)
- SS-EN-ISO-10414-1 - Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids (ISO 10414-1:2008)
- SS-EN-ISO-10414-2 - Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011)
- SS-EN-ISO-10416 - Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008)
- SS-EN-ISO-10417 - Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004)
- SS-EN-ISO-10418 - Petroleum and natural gas industries - Offshore production installations - Process safety systems (ISO/FDIS 10418:2019)
- SS-EN-ISO-10423 - Petroleum and natural gas industries - Drilling and production equipment - Wellhead and tree equipment (ISO 10423:2022)
- SS-EN-ISO-10424-1 - Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004)
- SS-EN-ISO-10424-2 - Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007)
- SS-EN-ISO-10426-1 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2009)
- SS-EN-ISO-10427-1 - Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001)
- SS-EN-ISO-10427-2 - Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing (ISO 10427-2:2004)
- SS-EN-ISO-10427-3 - Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment (ISO 10427-3:2003)
- SS-EN-ISO-10432 - Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
- SS-EN-ISO-10855-1 - Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
- SS-EN-ISO-10855-2 - Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018)
- SS-EN-ISO-10855-3 - Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018)
- SS-EN-ISO-11960 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
- SS-EN-ISO-11961 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
- SS-EN-ISO-11961-AM1 - Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
- SS-EN-ISO-12736 - Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014)
- SS-EN-ISO-12736-1 - Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 1: Validation of materials and insulation systems (ISO 12736-1:2023)
- SS-EN-ISO-12736-2 - Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 2: Qualification processes for production and application procedures (ISO 12736-2:2023)
- SS-EN-ISO-12736-3 - Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 3: Interfaces between systems, field joint system, field repairs and prefabricated insulation (ISO 12736-3:2023)
- SS-EN-ISO-13085 - Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)
- SS-EN-ISO-13354 - Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment (ISO 13354:2014)
- SS-EN-ISO-13500 - Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008)
- SS-EN-ISO-13500-AM1 - Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1: Barite 4,1 (ISO 13500:2008/Amd 1:2010)
- SS-EN-ISO-13501 - Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011)
- SS-EN-ISO-13533 - Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001)
- SS-EN-ISO-13534 - Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000)
- SS-EN-ISO-13535 - Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000)
- SS-EN-ISO-13624-1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment (ISO 13624-1:2009)
- SS-EN-ISO-13625 - Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
- SS-EN-ISO-13626 - Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003)
- SS-EN-ISO-13628-1 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005)
- SS-EN-ISO-13628-10 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005)
- SS-EN-ISO-13628-11 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications (ISO 13628-11:2007)
- SS-EN-ISO-13628-15 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011)
- SS-EN-ISO-13628-1-AM1 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 1: Revised Clause 6 (ISO 13628-1:2005/Amd 1:2010)
- SS-EN-ISO-13628-2 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006)
- SS-EN-ISO-13628-3 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000)
- SS-EN-ISO-13628-4 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:2010)
- SS-EN-ISO-13628-5 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009)
- SS-EN-ISO-13628-6 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006)
- SS-EN-ISO-13628-7 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
- SS-EN-ISO-13628-8 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems (ISO 13628-8:2002)
- SS-EN-ISO-13628-9 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000)
- SS-EN-ISO-13678 - Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements (ISO 13678:2010)
- SS-EN-ISO-13679 - Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2019)
- SS-EN-ISO-13680 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
- SS-EN-ISO-13702 - Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:2015)
- SS-EN-ISO-13703 - Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000)
- SS-EN-ISO-13703-2 - Oil and gas industries including lower carbon energy - Piping systems on offshore platforms and onshore plants - Part 2: Materials (ISO 13703-2:2023)
- SS-EN-ISO-13703-3 - Oil and gas industries including lower carbon energy - Piping systems on offshore production platforms and onshore plants - Part 3: Fabrication (ISO 13703-3:2023)
- SS-EN-ISO-13819-1 - Petroleum and natural gas industries - Offshore structures - Part 1: General requirements (ISO 13819-1:1995)
- SS-EN-ISO-14310 - Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008)
- SS-EN-ISO-14693 - Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003)
- SS-EN-ISO-14998 - Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013)
- SS-EN-ISO-15136-1 - Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
- SS-EN-ISO-15136-2 - Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface- drive systems (ISO 15136-2:2006)
- SS-EN-ISO-15138 - Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2018)
- SS-EN-ISO-15156-2 - Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2020)
- SS-EN-ISO-15156-3 - Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2020)
- SS-EN-ISO-15463 - Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003)
- SS-EN-ISO-15544 - Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response (ISO 15544:2000, including Amd 1:2009)
- SS-EN-ISO-15546 - Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)
- SS-EN-ISO-15551 - Petroleum and natural gas industries - Drilling and production equipment - Electric submersible pump systems for artificial lift (ISO 15551:2023)
- SS-EN-ISO-15551-1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
- SS-EN-ISO-16070 - Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005)
- SS-EN-ISO-16530-1 - Petroleum and natural gas industries - Well integrity - Part 1: Life cycle governance (ISO 16530-1:2017)
- SS-EN-ISO-17078-1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels (ISO 17078-1:2004)
- SS-EN-ISO-17078-1-AM1 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels - Amendment 1 (ISO 17078-1:2004/Amd 1:2010)
- SS-EN-ISO-17078-2 - Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels (ISO 17078-2:2007)
- SS-EN-ISO-17078-3 - Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009)
- SS-EN-ISO-17078-4 - Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
- SS-EN-ISO-17776 - Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO 17776:2016)
- SS-EN-ISO-17824 - Petroleum and natural gas industries - Downhole equipment - Sand screens (ISO 17824:2009)
- SS-EN-ISO-17945 - Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015)
- SS-EN-ISO-18647 - Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms (ISO 18647:2017)
- SS-EN-ISO-18797-1 - Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
- SS-EN-ISO-18797-2 - Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 2: Maintenance and field repair coatings for riser pipes (ISO 18797-2:2021)
- SS-EN-ISO-19900 - Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2019)
- SS-EN-ISO-19901-1 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2015)
- SS-EN-ISO-19901-10 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 10: Marine geophysical investigations (ISO 19901-10:2021)
- SS-EN-ISO-19901-2 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2022)
- SS-EN-ISO-19901-3 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014)
- SS-EN-ISO-19901-4 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2016)
- SS-EN-ISO-19901-5 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight management (ISO 19901-5:2021)
- SS-EN-ISO-19901-6 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (ISO 19901-6:2009)
- SS-EN-ISO-19901-7 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2013)
- SS-EN-ISO-19901-8 - Oil and gas industries including lower carbon energy - Offshore structures - Part 8: Marine soil investigations (ISO 19901-8:2023)
- SS-EN-ISO-19901-9 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 9: Structural integrity management (ISO 19901-9:2019)
- SS-EN-ISO-19902 - Petroleum and natural gas industries - Fixed steel offshore structures (ISO 19902:2020)
- SS-EN-ISO-19902-AM1 - Petroleum and natural gas industries - Fixed steel offshore structures (ISO 19902:2007/Amd 1:2013)
- SS-EN-ISO-19903 - Petroleum and natural gas industries - Concrete offshore structures (ISO 19903:2019)
- SS-EN-ISO-19904-1 - Petroleum and natural gas industries - Floating offshore structures - Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures (ISO 19904-1:2019)
- SS-EN-ISO-19905-1 - Oil and gas industries including lower carbon energy - Site-specific assessment of mobile offshore units - Part 1: Jack-ups: elevated at a site (ISO 19905-1:2023)
- SS-EN-ISO-19905-3 - Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 3: Floating units (ISO 19905-3:2021)
- SS-EN-ISO-19906 - Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010)
- SS-EN-ISO-20312 - Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011)
- SS-EN-ISO-21427-2 - Water quality - Evaluation of genotoxicity by measurement of the induction of micronuclei - Part 2 Mixed population method using the cell line V79 (ISO 21427-2:2006)
- SS-EN-ISO-21457 - Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
- SS-EN-ISO-24200 - Petroleum, petrochemical and natural gas industries - Bulk material for offshore projects - Pipe support (ISO 24200:2022)
- SS-EN-ISO-27627 - Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging (ISO 27627:2014)
- SS-EN-ISO-28199-1 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-1:2021)
- SS-EN-ISO-28781 - Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010)
- SS-EN-ISO-3421 - Petroleum and natural gas industries - Drilling and production equipment - Offshore conductor design, setting depth and installation (ISO 3421:2022)
- SS-EN-ISO-3977-5 - Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
- SS-EN-ISO-6807 - Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003)
- SS-ISO-11886 - Building construction machinery and equipment Pile driving and extracting equipment Terminology and commercial specifications (ISO 11886:2002, IDT)
- SS-ISO-6807 - Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003, IDT)