Document Center List of Standards on Biofuels Including Solid Biofuels, Liquid Biofuels And Biogas
ICS Code 75.160.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-EN-12662-1 - Liquid petroleum products. Determination of total contamination
- BS-EN-12662-2 - Liquid petroleum products. Determination of total contamination
- BS-EN-14780 - Solid biofuels. Sample preparation
- BS-EN-16300-TC - Tracked Changes. Automotive fuels. Determination of iodine value in fatty acid methyl esters (FAME). Calculation method from gas chromatographic data
- BS-EN-16900 - Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
- BS-EN-ISO-14780 - Solid biofuels. Sample preparation
- BS-EN-ISO-16993-TC - Tracked Changes. Solid biofuels. Conversion of analytical results from one basis to another
- BS-EN-ISO-16994-TC - Tracked Changes. Solid biofuels. Determination of total content of sulphur and chlorine
- BS-EN-ISO-17225-1-TC - Tracked Changes. Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-2-TC - Tracked Changes. Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-7-TC - Tracked Changes. Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-9 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17827-1-TC - Tracked Changes. Solid biofuels. Determination of particle size distribution for uncompressed fuels
- BS-EN-ISO-17827-2-TC - Tracked Changes. Solid biofuels. Determination of particle size distribution for uncompressed fuels
- BS-EN-ISO-17830-TC - Tracked Changes. Solid biofuels. Particle size distribution of disintegrated pellets
- BS-EN-ISO-18122-TC - Tracked Changes. Solid biofuels. Determination of ash content
- BS-EN-ISO-18123-TC - Tracked Changes. Solid biofuels. Determination of volatile matter
- BS-EN-ISO-18125 - Solid biofuels. Determination of calorific value
- BS-EN-ISO-18134-2-TC - Tracked Changes. Solid biofuels. Determination of moisture content
- BS-EN-ISO-18134-3-TC - Tracked Changes. Solid biofuels. Determination of moisture content
- BS-EN-ISO-18135 - Solid Biofuels. Sampling
- BS-EN-ISO-18847-TC - Tracked Changes. Solid biofuels. Determination of particle density of pellets and briquettes
- BS-EN-ISO-19743 - Solid biofuels. Determination of content of heavy extraneous materials larger than 3,15 mm
- BS-EN-ISO-20023 - Solid biofuels. Safety of solid biofuel pellets. Safe handling and storage of wood pellets in residential and other small-scale applications
- BS-EN-ISO-20024 - Solid biofuels. Safe handling and storage of solid biofuel pellets in commercial and industrial applications
- BS-EN-ISO-20049-1 - Solid biofuels. Determination of self-heating of pelletized biofuels
- BS-EN-ISO-21644 - Solid recovered fuels. Methods for the determination of biomass content
- BS-EN-ISO-21645 - Solid recovered fuels. Methods for sampling
- BS-EN-ISO-21646 - Solid recovered fuels. Sample preparation
- BS-EN-ISO-21654 - Solid recovered fuels. Determination of calorific value
- BS-EN-ISO-21656 - Solid recovered fuels. Determination of ash content
- BS-EN-ISO-21663 - Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- BS-EN-ISO-21945 - Solid biofuels. Simplified sampling method for small scale applications
- BS-EN-ISO-22167 - Solid recovered fuels. Determination of content of volatile matter
- BS-EN-ISO-5370 - Solid biofuels. Determination of fines content in pellets
- BS-ISO-20048-2 - Solid biofuels. Determination of off-gassing and oxygen depletion characteristics
- BS-ISO-20424 - Fatty acid methyl esters (FAME). Determination of sulfur content. Inductively coupled plasma optical emission spectrometry (ICP-OES) method
- BS-ISO-5946 - Bamboo-based activated carbon. General specifications
- BS-ISO-6729 - Petroleum products and other liquids. Standard test method for ethanol determination in gasoline blends by gas chromatography
- PD-CEN-17103 - Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination
- PD-CEN-17225 - Fuels and biofuels. Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME)
- PD-CEN-ISO-20048-1 - Solid biofuels. Determination of off-gassing and oxygen depletion characteristics
- PD-ISO-17225-9 - Solid biofuels. Fuel specifications and classes
- PD-ISO-23437 - Solid biofuels. Bridging behaviour of bulk biofuels
ISO:
- ISO-14780 - Solid biofuels - Sample preparation
- ISO-14780-AM1 - - Amendment 1
- ISO-16559 - Solid biofuels - Vocabulary
- ISO-16948 - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen
- ISO-16967 - Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
- ISO-16968 - Solid biofuels - Determination of minor elements
- ISO-16993 - Solid biofuels - Conversion of analytical results from one basis to another
- ISO-16994 - Solid biofuels - Determination of total content of sulfur and chlorine
- ISO-16995 - Solid biofuels - Determination of the water soluble chloride, sodium and potassium content
- ISO-16996 - Solid biofuels - Determination of elemental composition by X-ray fluorescence
- ISO-17225-1 - Solid biofuels - Fuel specifications and classes - Part 1: General requirements
- ISO-17225-2 - Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets
- ISO-17225-3 - Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes
- ISO-17225-4 - Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips
- ISO-17225-5 - Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood
- ISO-17225-6 - Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets
- ISO-17225-7 - Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes
- ISO-17225-8 - Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use
- ISO-17225-9 - Solid biofuels - Fuel specifications and classes - Part 9: Graded hog fuel and wood chips for industrial use
- ISO-17306 - Petroleum products - Biodiesel - Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
- ISO-17307 - Petroleum products - Biodiesel - Determination of total esters content by gas chromatography
- ISO-17308 - Petroleum products and other liquids - Ethanol - Determination of electrical conductivity
- ISO-17315 - Petroleum products and other liquids - Ethanol - Determination of total acidity by potentiometric titration
- ISO-17827-1 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
- ISO-17827-2 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below
- ISO-17828 - Solid biofuels - Determination of bulk density
- ISO-17829 - Solid Biofuels - Determination of length and diameter of pellets
- ISO-17830 - Solid biofuels - Particle size distribution of disintegrated pellets
- ISO-17831-1 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- ISO-17831-2 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
- ISO-18122 - Solid biofuels - Determination of ash content
- ISO-18123 - Solid biofuels - Determination of volatile matter
- ISO-18125 - Solid biofuels - Determination of calorific value
- ISO-18134 - Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- ISO-18134-1 - Solid biofuels - Determination of moisture content - Part 1: Reference method
- ISO-18134-2 - Solid biofuels - Determination of moisture content - Part 2: Simplified method
- ISO-18134-3 - Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample
- ISO-18135 - Solid Biofuels - Sampling
- ISO-18846 - Solid biofuels - Determination of fines content in samples of pellets
- ISO-18847 - Solid biofuels - Determination of particle density of pellets and briquettes
- ISO-19743 - Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm
- ISO-20023 - Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications
- ISO-20024 - Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications
- ISO-20048-1 - Solid biofuels - Determination of off-gassing and oxygen depletion characteristics - Part 1: Laboratory method for the determination of off-gassing and oxygen depletion using closed containers
- ISO-20048-2 - Solid biofuels - Determination of off-gassing and oxygen depletion characteristics - Part 2: Operational method for screening of carbon monoxide off-gassing
- ISO-20049-1 - Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry
- ISO-20049-2 - Solid biofuels - Determination of self-heating of pelletized biofuels - Part 2: Basket heating tests
- ISO-20424 - Fatty acid methyl esters (FAME) - Determination of sulfur content - Inductively coupled plasma optical emission spectrometry (ICP-OES) method
- ISO-21404 - Solid biofuels - Determination of ash melting behaviour
- ISO-21596 - Solid biofuels - Determination of grindability - Hardgrove type method for thermally treated biomass fuels
- ISO-21626-1 - Bamboo charcoal - Part 1: Generalities
- ISO-21626-2 - Bamboo charcoal - Part 2: Fuel applications
- ISO-21626-3 - Bamboo charcoal - Part 3: Purification applications
- ISO-21945 - Solid biofuels - Simplified sampling method for small scale applications
- ISO-23343-1 - Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets
- ISO-23437 - Solid biofuels - Bridging behaviour of bulk biofuels
- ISO-5370 - Solid biofuels - Determination of fines content in pellets
- ISO-5946 - Bamboo-based activated carbon - General specifications
- ISO-6729 - Petroleum products and other liquids - Standard test method for ethanol determination in gasoline blends by gas chromatography
Other SDOs:
- CEN-17225 - Fuels and biofuels - Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME)
- EN-16900 - Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
- EN-16934 - Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
- EN-ISO-14780 - Solid biofuels - Sample preparation
- EN-ISO-18125 - Solid biofuels - Determination of calorific value
- EN-ISO-18134-2 - Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
- EN-ISO-18135 - Solid Biofuels - Sampling
- EN-ISO-19743 - Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm
- SIS-CEN-ISO/TS-20049-2 - Solid biofuels - Determination of self-heating of pelletized biofuels - Part 2: Basket heating tests (ISO/TS 20049-2:2020)
- SIS-CEN-ISO/TS-21596 - Solid biofuels - Determination of grindability - Hardgrove type method for thermally treated biomass fuels (ISO/TS 21596:2021)
- SIS-CEN/TR-17103 - Fast pyrolysis bio-oil for stationary internal combustion engines - Quality determination
- SIS-CEN/TR-17225 - Fuels and biofuels - Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME)
- SIS-ISO/TR-23437 - Solid biofuels - Determination of bridging behaviour of bulk biofuels
- SIS-ISO/TS-17225-9 - Solid biofuels - Fuel specifications and classes - Part 9: Graded hog fuel and wood chips for industrial use (ISO/TS 17225-9:2020)
- SIS-ISO/TS-17307 - Petroleum products - Biodiesel - Determination of total esters content by gas chromatography
- SIS-ISO/TS-20048-1 - Solid biofuels - Determination of off-gassing and oxygen depletion characteristics - Part 1: Laboratory method for the determination of off-gassing and oxygen depletion using closed containers (ISO/TS 20048-1:2020)
- SIS-ISO/TS-20049-2 - Solid biofuels Determination of self-heating of pelletized biofuels Part 2: Basket heating tests (ISO/TS 20049-2:2020)
- SS-EN-12662 - Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
- SS-EN-14214 - Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
- SS-EN-14778 - Solid biofuels - Sampling
- SS-EN-14780 - Solid biofuels - Sample preparation
- SS-EN-14918 - Solid Biofuels - Determination of calorific value
- SS-EN-15234-1 - Solid biofuels - Fuel quality assurance - Part 1: General requirements
- SS-EN-15234-2 - Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
- SS-EN-15234-3 - Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
- SS-EN-15234-4 - Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
- SS-EN-15234-5 - Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
- SS-EN-15234-6 - Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
- SS-EN-15357 - Solid recovered fuels - Terminology, definitions and descriptions
- SS-EN-15358 - Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
- SS-EN-15400 - Solid recovered fuels - Determination of calorific value
- SS-EN-15402 - Solid recovered fuels - Determination of the content of volatile matter
- SS-EN-15403 - Solid recovered fuels - Determination of ash content
- SS-EN-15407 - Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
- SS-EN-15408 - Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
- SS-EN-15410 - Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
- SS-EN-15411 - Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
- SS-EN-15413 - Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- SS-EN-15414-3 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- SS-EN-15415-1 - Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- SS-EN-15440 - Solid recovered fuels - Methods for the determination of biomass content
- SS-EN-15442 - Solid recovered fuels - Methods for sampling
- SS-EN-15443 - Solid recovered fuels - Methods for the preparation of the laboratory sample
- SS-EN-15751 - Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
- SS-EN-15779 - Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
- SS-EN-16214-1 - Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
- SS-EN-16214-4 - Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using a life cycle analysis approach
- SS-EN-16270 - Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
- SS-EN-16294 - Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
- SS-EN-16300 - Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data
- SS-EN-16900 - Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
- SS-EN-16934 - Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
- SS-EN-ISO-14780 - Solid biofuels - Sample preparation (ISO 14780:2017)
- SS-EN-ISO-14780-AM1 - Solid biofuels - Sample preparation - Amendment 1 (ISO 14780:2017/Amd 1:2019)
- SS-EN-ISO-16559 - Solid biofuels - Vocabulary (ISO 16559:2022)
- SS-EN-ISO-16948 - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015)
- SS-EN-ISO-16967 - Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti (ISO 16967:2015)
- SS-EN-ISO-16968 - Solid biofuels - Determination of minor elements (ISO 16968:2015)
- SS-EN-ISO-16993 - Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)
- SS-EN-ISO-16994 - Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016)
- SS-EN-ISO-16995 - Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015)
- SS-EN-ISO-17225-1 - Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2021)
- SS-EN-ISO-17225-2 - Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021)
- SS-EN-ISO-17225-3 - Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2021)
- SS-EN-ISO-17225-4 - Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO 17225-4:2021)
- SS-EN-ISO-17225-5 - Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2021)
- SS-EN-ISO-17225-6 - Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021)
- SS-EN-ISO-17225-7 - Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2021)
- SS-EN-ISO-17225-8 - Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use (ISO 17225-8:2023)
- SS-EN-ISO-17225-9 - Solid biofuels - Fuel specifications and classes - Part 9: Graded hog fuel and wood chips for industrial use (ISO 17225-9:2021)
- SS-EN-ISO-17827-1 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
- SS-EN-ISO-17827-2 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016)
- SS-EN-ISO-17828 - Solid biofuels - Determination of bulk density (ISO 17828:2015)
- SS-EN-ISO-17829 - Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
- SS-EN-ISO-17830 - Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
- SS-EN-ISO-17831-1 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
- SS-EN-ISO-17831-2 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO 17831-2:2015)
- SS-EN-ISO-18122 - Solid biofuels - Determination of ash content (ISO 18122:2022)
- SS-EN-ISO-18123 - Solid biofuels - Determination of volatile matter (ISO 18123:2023)
- SS-EN-ISO-18125 - Solid biofuels - Determination of calorific value (ISO 18125:2017)
- SS-EN-ISO-18134-1 - Solid biofuels - Determination of moisture content - Part 1: Reference method (ISO 18134-1:2022)
- SS-EN-ISO-18134-2 - Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017)
- SS-EN-ISO-18134-3 - Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
- SS-EN-ISO-18135 - Solid Biofuels - Sampling (ISO 18135:2017)
- SS-EN-ISO-18846 - Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
- SS-EN-ISO-18847 - Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
- SS-EN-ISO-19432 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
- SS-EN-ISO-19743 - Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017)
- SS-EN-ISO-20023 - Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018)
- SS-EN-ISO-20024 - Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications (ISO 20024:2020)
- SS-EN-ISO-20049-1 - Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry (ISO 20049-1:2020)
- SS-EN-ISO-21404 - Solid biofuels - Determination of ash melting behaviour (ISO 21404:2020)
- SS-EN-ISO-21637 - Solid recovered fuels - Vocabulary (ISO 21637:2020)
- SS-EN-ISO-21644 - Solid recovered fuels - Methods for the determination of biomass content (ISO 21644:2021)
- SS-EN-ISO-21645 - Solid recovered fuels - Methods for sampling (ISO 21645:2021)
- SS-EN-ISO-21646 - Solid recovered fuels - Sample preparation (ISO 21646:2022)
- SS-EN-ISO-21654 - Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
- SS-EN-ISO-21656 - Solid recovered fuels - Determination of ash content (ISO 21656:2021)
- SS-EN-ISO-21660-3 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
- SS-EN-ISO-21663 - Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
- SS-EN-ISO-21904-2 - Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 2: Requirements for testing and marking of separation efficiency (ISO 21904-2:2020)
- SS-EN-ISO-21945 - Solid biofuels - Simplified sampling method for small scale applications (ISO 21945:2020)
- SS-EN-ISO-22167 - Solid recovered fuels - Determination of content of volatile matter (ISO 22167:2021)
- SS-EN-ISO-23343-1 - Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO 23343-1:2021)
- SS-ISO-20424 - Fatty acid methyl esters (FAME) - Determination of sulfur content - Inductively coupled plasma optical emission spectrometry (ICP-OES) method (ISO 20424:2019, IDT)
- SS-ISO-22915-13 - Industrial trucks - Verification of stability - Part 13: Rough-terrain trucks with mast (ISO 22915-13:2012, IDT)
- UNE-EN-ISO-17831-1 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- UNE-EN-ISO-17831-2 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes