Document Center List of Standards on Solid Fuels Including Coal Products, Coke, Peat, Wood, Derivatives Of Coal Pyrolysis, Etc. Coals, See 73.040
ICS Code 75.160.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D121 - Standard Terminology of Coal and Coke
- ASTM-D167 - Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
- ASTM-D1762 - Standard Test Method for Chemical Analysis of Wood Charcoal
- ASTM-D1989 - Standard Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters (Withdrawn 2000)
- ASTM-D2015 - Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter (Withdrawn 2000)
- ASTM-D2234 - Standard Practice for Collection of a Gross Sample of Coal
- ASTM-D2361 - Standard Test Method for Chlorine in Coal (Withdrawn 2008)
- ASTM-D2492 - Standard Test Method for Forms of Sulfur in Coal (Withdrawn 2021)
- ASTM-D2507 - Standard Terminology of Rheological Properties of Gelled Rocket Propellants
- ASTM-D2638 - Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
- ASTM-D2639 - Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
- ASTM-D2795 - Standard Test Methods for Analysis of Coal and Coke Ash (Withdrawn 2001)
- ASTM-D2796 - Terminology Relating to Megascopic Description of Coal and Coal Seams and Microscopical Description and Analysis of Coal (Withdrawn 1995)
- ASTM-D293 - Standard Test Method for the Sieve Analysis of Coke
- ASTM-D2944 - Standard Practice of Sampling Processed Peat Materials for Horticultural Purposes
- ASTM-D2961 - Standard Practice for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36 mm [No. 8 Sieve] Topsize
- ASTM-D3038 - Standard Test Method for Drop Shatter Test for Coke
- ASTM-D310 - See: ASTM-D4749
- ASTM-D311 - See: ASTM-D4749
- ASTM-D3172 - Standard Practice for Proximate Analysis of Coal and Coke
- ASTM-D3173 - Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
- ASTM-D3174 - Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
- ASTM-D3175 - Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
- ASTM-D3176 - Standard Practice for Ultimate Analysis of Coal and Coke
- ASTM-D3177 - Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke (Withdrawn 2012)
- ASTM-D3178 - Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
- ASTM-D3179 - Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke (Withdrawn 2008)
- ASTM-D3180 - Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
- ASTM-D3286 - Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter (Withdrawn 2000)
- ASTM-D3302 - Standard Test Method for Total Moisture in Coal
- ASTM-D3402 - Standard Test Method for Tumbler Test for Coke
- ASTM-D346 - Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
- ASTM-D3466 - Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM-D3683 - Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption (Withdrawn 2018)
- ASTM-D3684 - Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method (Withdrawn 2014)
- ASTM-D3761 - Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method (Withdrawn 2019)
- ASTM-D3802 - Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM-D3836 - Standard Practice for Evaluation of Automotive Polish
- ASTM-D3838 - Standard Test Method for pH of Activated Carbon
- ASTM-D388 - Standard Classification of Coals by Rank
- ASTM-D3997 - Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
- ASTM-D410 - Method of Sieve Analysis of Coal (Withdrawn 1988)
- ASTM-D4208 - Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
- ASTM-D4239 - Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM-D4292 - Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
- ASTM-D431 - Method for Designating the Size of Coal from its Sieve Analysis (Withdrawn 1988)
- ASTM-D4326 - Standard Test Method for Major and Minor Elements in Coal Ash By X-Ray Fluorescence
- ASTM-D4371 - Standard Test Method for Determining the Washability Characteristics of Coal
- ASTM-D4421 - Standard Test Method for Volatile Matter in Petroleum Coke (Withdrawn 2004)
- ASTM-D4422 - Standard Test Method for Ash in Analysis of Petroleum Coke
- ASTM-D4606 - Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
- ASTM-D4607 - Standard Test Method for Determination of Iodine Number of Activated Carbon
- ASTM-D4702 - Standard Practice for Quality Management of Mechanical Coal Sampling Systems (Withdrawn 2008)
- ASTM-D4749 - Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM-D4915 - Standard Guide for Manual Sampling of Coal from Tops of Railroad Cars (Withdrawn 2003)
- ASTM-D4930 - Standard Test Method for Dust Control Material on Calcined Petroleum Coke
- ASTM-D4931 - Standard Test Method for Gross Moisture in Green Petroleum Coke
- ASTM-D5003 - Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
- ASTM-D5004 - Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
- ASTM-D5016 - Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
- ASTM-D5056 - Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
- ASTM-D5115 - Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF (Withdrawn 2004)
- ASTM-D5142 - Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures (Withdrawn 2010)
- ASTM-D5187 - Standard Test Method for Determination of Crystallite Size (L
c ) of Calcined Petroleum Coke by X-Ray Diffraction - ASTM-D5341 - Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
- ASTM-D5373 - Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
- ASTM-D5600 - Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D5709 - Standard Test Method for Sieve Analysis of Petroleum Coke
- ASTM-D5987 - Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods (Withdrawn 2020)
- ASTM-D6228 - Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
- ASTM-D6316 - Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM-D6349 - Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
- ASTM-D6357 - Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry
- ASTM-D6374 - Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
- ASTM-D6376 - Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
- ASTM-D6796 - Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
- ASTM-D6969 - Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
- ASTM-D6970 - Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
- ASTM-D7430 - Standard Practice for Mechanical Sampling of Coal
- ASTM-D7448 - Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke (Withdrawn 2024)
- ASTM-D7454 - Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
- ASTM-D8097 - Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
- ASTM-D8213 - Standard Test Method for Determination of Boron in Coal
- ASTM-D8214 - Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM-E1126 - Standard Terminology Relating to Biomass Fuels (Withdrawn 2003)
- ASTM-E1288 - Standard Test Method for The Durability of Biomass Pellets (Withdrawn 2003)
- ASTM-E1358 - Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
- ASTM-E1534 - Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
- ASTM-E2201 - Standard Terminology for Coal Combustion Products
- ASTM-E3183 - Standard Guide for Harvesting Coal Combustion Products Stored in Active and Inactive Storage Areas for Beneficial Use
- ASTM-E711 - Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (Withdrawn 2004)
- ASTM-E775 - Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
- ASTM-E776 - Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel
- ASTM-E777 - Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
- ASTM-E778 - Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
- ASTM-E790 - Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples
- ASTM-E791 - Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
- ASTM-E829 - Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
- ASTM-E830 - Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel
- ASTM-E856 - Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel (Withdrawn 2004)
- ASTM-E870 - Standard Test Methods for Analysis of Wood Fuels
- ASTM-E871 - Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM-E872 - Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM-E873 - Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
- ASTM-E885 - Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy (Withdrawn 2009)
- ASTM-E886 - Standard Practices for Dissolution of Refuse-Derived Fuel (RDF) Ash Samples for Analyses of Metals (Withdrawn 2002)
- ASTM-E887 - Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
- ASTM-E897 - Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel (Withdrawn 2004)
- ASTM-E926 - Standard Practices for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals (Withdrawn 2002)
- ASTM-E949 - Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample (Withdrawn 2004)
- ASTM-E953 - Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash
- ASTM-E954 - Standard Practice for Packaging and Shipping of Laboratory Samples of Refuse-Derived Fuel (Withdrawn 2002)
- ASTM-E955 - Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples (Withdrawn 2017)
BSI:
- BS-1016-1 - Methods for analysis and testing of coal and coke
- BS-1016-10 - Methods for analysis and testing of coal and coke
- BS-1016-100 - Methods for analysis and testing of coal and coke
- BS-1016-102 - Methods for analysis and testing of coal and coke
- BS-1016-104.1 - Methods for analysis and testing of coal and coke. Proximate analysis
- BS-1016-104.2 - Methods for analysis and testing of coal and coke
- BS-1016-104.3 - Methods for analysis and testing of coal and coke
- BS-1016-104.4 - Methods for analysis and testing of coal and coke. Proximate analysis. Determination of ash
- BS-1016-105 - Methods for analysis and testing of coal and coke
- BS-1016-106.1.1 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbon and hydrogen content
- BS-1016-106.1.2 - Methods for analysis and testing of coal and coke
- BS-1016-106.2 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke
- BS-1016-106.4.1 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content
- BS-1016-106.4.2 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content
- BS-1016-106.5 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke
- BS-1016-106.6.1 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of chlorine content
- BS-1016-106.7 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke
- BS-1016-107.1 - Methods for analysis and testing of coal and coke. Caking and swelling properties of coal
- BS-1016-107.2 - Methods for analysis and testing of coal and coke. Caking and swelling properties of coal
- BS-1016-107.3 - Methods for analysis and testing of coal and coke. Caking and swelling properties of coal
- BS-1016-108.1 - Methods for analysis and testing of coal and coke. Tests special to coke
- BS-1016-108.2 - Methods for analysis and testing of coal and coke. Tests special to coke
- BS-1016-108.3 - Methods for analysis and testing of coal and coke. Tests special to coke
- BS-1016-108.4 - Methods for analysis and testing of coal and coke. Tests special to coke
- BS-1016-108.5 - Methods for analysis and testing of coal and coke. Tests special to coke
- BS-1016-108.6 - Methods for analysis and testing of coal and coke. Tests special to coke
- BS-1016-109 - Methods for analysis and testing of coal and coke
- BS-1016-110.1 - Methods for analysis and testing of coal and coke. Size analysis of coke
- BS-1016-110.2 - Methods for analysis and testing of coal and coke. Size analysis of coke
- BS-1016-111 - Methods for analysis and testing of coal and coke
- BS-1016-113 - Methods for analysis and testing of coal and coke
- BS-1016-12 - Methods for analysis and testing of coal and coke
- BS-1016-13 - Methods for analysis and testing of coal and coke
- BS-1016-14 - Methods for analysis and testing of coal and coke
- BS-1016-2 - Methods for analysis and testing of coal and coke. Total moisture of coke
- BS-1016-21 - Methods for analysis and testing of coal and coke
- BS-1016-3 - Methods for analysis and testing of coal and coke. Proximate analysis of coal
- BS-1016-6 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal
- BS-1016-7 - Methods for analysis and testing of coal and coke. Ultimate analysis of coke
- BS-1016-8 - Methods for analysis and testing of coal and coke. Chlorine in coal and coke
- BS-1016-9 - Methods for analysis and testing of coal and coke
- BS-1017-1 - Sampling of coal and coke
- BS-1017-2 - Sampling of coal and coke
- BS-1293-&-2074 - Methods for the size analysis of coal and coke
- BS-3142-2 - Specification for manufactured solid smokeless fuels for household use
- BS-3142-3 - Specification for manufactured solid smokeless fuels for household use
- BS-3323 - Glossary of terms relating to sampling, testing and analysis of solid mineral fuels
- BS-3841-1 - Determination of smoke emission from manufactured solid fuels for domestic use
- BS-3841-2 - Determination of smoke emission from manufactured solid fuels for domestic use
- BS-4262 - Method of specifying the technical quality of coke for use in blast furnaces
- BS-4845-1 - Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags
- BS-4845-2 - Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags
- BS-6043-2.10 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.11 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.13 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2-18 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-2.2 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.20.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Carboxy reactivity of calcined coke
- BS-6043-2.21.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Air reactivity of calcined coke
- BS-6043-2.3 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.4 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-2.9 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.5.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6127-4 - Petrographic analysis of bituminous coal and anthracite
- BS-7952 - Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
- BS-EN-12303 - Coal tar based oils. Terminology
- BS-EN-14588 - Solid biofuels. Terminology, definitions and descriptions
- BS-EN-14774-1 - Solid biofuels. Determination of moisture content. Oven dry method
- BS-EN-14774-2 - Solid biofuels. Determination of moisture content. Oven dry method
- BS-EN-14774-3 - Solid biofuels. Determination of moisture content. Oven dry method
- BS-EN-14775 - Solid biofuels. Determination of ash content
- BS-EN-14778 - Solid biofuels. Sampling
- BS-EN-14918 - Solid biofuels. Determination of calorific value
- BS-EN-14961-1 - Solid biofuels. Fuel specifications and classes
- BS-EN-14961-2 - Solid biofuels. Fuel specifications and classes
- BS-EN-14961-3 - Solid biofuels. Fuel specifications and classes
- BS-EN-14961-4 - Solid biofuels. Fuel specifications and classes
- BS-EN-14961-5 - Solid biofuels. Fuel specifications and classes
- BS-EN-14961-6 - Solid biofuels. Fuel specifications and classes
- BS-EN-15103 - Solid biofuels. Determination of bulk density
- BS-EN-15104 - Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
- BS-EN-15105 - Solid biofuels. Determination of the water soluble chloride, sodium and potassium content
- BS-EN-15148 - Solid biofuels. Determination of the content of volatile matter
- BS-EN-15149-1 - Solid biofuels. Determination of particle size distribution
- BS-EN-15149-2 - Solid biofuels. Determination of particle size distribution
- BS-EN-15150 - Solid biofuels. Determination of particle density
- BS-EN-15210-1 - Solid biofuels. Determination of mechanical durability of pellets and briquettes. Pellets
- BS-EN-15210-2 - Solid biofuels. Determination of mechanical durability of pellets and briquettes. Briquettes
- BS-EN-15234-2 - Solid biofuels. Fuel quality assurance
- BS-EN-15234-3 - Solid biofuels. Fuel quality assurance
- BS-EN-15234-4 - Solid biofuels. Fuel quality assurance
- BS-EN-15234-5 - Solid biofuels. Fuel quality assurance
- BS-EN-15234-6 - Solid biofuels. Fuel quality assurance
- BS-EN-15289 - Solid biofuels. Determination of total content of sulfur and chlorine
- BS-EN-15290 - Solid biofuels. Determination of major elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti
- BS-EN-15296 - Solid biofuels. Conversion of analytical results from one basis to another
- BS-EN-15297 - Solid biofuels. Determination of minor elements. As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
- BS-EN-15359 - Solid recovered fuels. Specifications and classes
- BS-EN-15407 - Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
- BS-EN-15408 - Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
- BS-EN-15410 - Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
- BS-EN-15411 - Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
- BS-EN-15413 - Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- BS-EN-15414-3 - Solid recovered fuels. Determination of moisture content using the oven dry method
- BS-EN-15415-1 - Solid recovered fuels. Determination of particle size distribution
- BS-EN-15415-2 - Solid recovered fuels. Determination of particle size distribution
- BS-EN-15415-3 - Solid recovered fuels. Determination of particle size distribution
- BS-EN-15440 - Solid recovered fuels. Methods for the determination of biomass content
- BS-EN-15442 - Solid recovered fuels. Methods for sampling
- BS-EN-15443 - Solid recovered fuels. Methods for the preparation of the laboratory sample
- BS-EN-15529 - Derivatives from coal pyrolysis. Terminology
- BS-EN-15536 - Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods
- BS-EN-15590 - Solid recovered fuels. Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
- BS-EN-16126 - Solid biofuels. Determination of particle size distribution of disintegrated pellets
- BS-EN-16127 - Solid biofuels. Determination of length and diameter of pellets
- BS-EN-1860-1 - Appliances, solid fuels and firelighters for barbecueing
- BS-EN-1860-2-TC - Tracked Changes. Appliances, solid fuels and firelighters for barbecuing
- BS-EN-1860-3 - Appliances, solid fuels and firelighters for barbecuing
- BS-EN-1860-3-TC - Tracked Changes. Appliances, solid fuels and firelighters for barbecuing
- BS-EN-1860-4 - Appliances, solid fuels and firelighters for barbecuing
- BS-EN-1860-4-TC - Tracked Changes. Appliances, solid fuels and firelighters for barbecuing
- BS-EN-ISO-16559 - Solid biofuels. Vocabulary
- BS-EN-ISO-16948 - Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen
- BS-EN-ISO-16967 - Solid biofuels. Determination of major elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti
- BS-EN-ISO-16968 - Solid biofuels. Determination of minor elements
- BS-EN-ISO-16993 - Solid biofuels. Conversion of analytical results from one basis to another
- BS-EN-ISO-16994 - Solid biofuels. Determination of total content of sulphur and chlorine
- BS-EN-ISO-16995 - Solid biofuels. Determination of the water soluble chloride, sodium and potassium content
- BS-EN-ISO-17225-1 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-2 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-3 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-4 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-5 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-6 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-7 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-8 - Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17225-8-TC - Tracked Changes. Solid biofuels. Fuel specifications and classes
- BS-EN-ISO-17827-1 - Solid biofuels. Determination of particle size distribution for uncompressed fuels
- BS-EN-ISO-17827-2 - Solid biofuels. Determination of particle size distribution for uncompressed fuels
- BS-EN-ISO-17828 - Solid biofuels. Determination of bulk density
- BS-EN-ISO-17829 - Solid biofuels. Determination of length and diameter of pellets
- BS-EN-ISO-17830 - Solid biofuels. Particle size distribution of disintegrated pellets
- BS-EN-ISO-17831-1 - Solid biofuels. Determination of mechanical durability of pellets and briquettes
- BS-EN-ISO-17831-2 - Solid biofuels. Determination of mechanical durability of pellets and briquettes
- BS-EN-ISO-18122 - Solid biofuels. Determination of ash content
- BS-EN-ISO-18123 - Solid biofuels. Determination of volatile matter
- BS-EN-ISO-18134-1 - Solid biofuels. Determination of moisture content
- BS-EN-ISO-18134-2 - Solid biofuels. Determination of moisture content
- BS-EN-ISO-18134-3 - Solid biofuels. Determination of moisture content
- BS-EN-ISO-18846 - Solid biofuels. Determination of fines content in quantities of pellets
- BS-EN-ISO-18847 - Solid biofuels. Determination of particle density of pellets and briquettes
- BS-EN-ISO-18847-TC - Tracked Changes. Solid biofuels. Determination of particle density of pellets and briquettes
- BS-EN-ISO-21637 - Solid recovered fuels. Vocabulary
- BS-EN-ISO-21645 - Solid recovered fuels. Methods for sampling
- BS-EN-ISO-21654 - Solid recovered fuels. Determination of calorific value
- BS-EN-ISO-21656 - Solid recovered fuels. Determination of ash content
- BS-EN-ISO-21660-3 - Solid recovered fuels. Determination of moisture content using the oven dry method
- BS-EN-ISO-21663 - Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- BS-EN-ISO-21911-1 - Solid recovered fuels. Determination of self-heating
- BS-EN-ISO-21912 - Solid recovered fuels. Safe handling and storage of solid recovered fuels
- BS-EN-ISO-22167 - Solid recovered fuels. Determination of content of volatile matter
- BS-EN-ISO-22940 - Solid recovered fuels. Determination of elemental composition by X-ray fluorescence
- BS-EN-ISO-4349 - Solid recovered fuels. Determination of the Recycling Index for co-processing
- BS-ISO-1013 - Coke. Determination of bulk density in a large container
- BS-ISO-1014 - Coke. Determination of true relative density, apparent relative density and porosity
- BS-ISO-1170 - Coal and coke. Calculation of analyses to different bases
- BS-ISO-1171-TC - Tracked Changes. Coal and coke. Determination of ash
- BS-ISO-11726 - Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
- BS-ISO-11726-TC - Tracked Changes. Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
- BS-ISO-1213-1 - Coal and coke. Vocabulary
- BS-ISO-1213-2 - Coal and coke. Vocabulary
- BS-ISO-12984 - Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
- BS-ISO-13605 - Solid mineral fuels. Major and minor elements in coal ash and coke ash. Wavelength dispersive x-ray fluorescence spectrometric method
- BS-ISO-13605-TC - Tracked Changes. Solid mineral fuels. Major and minor elements in coal ash and coke ash. Wavelength dispersive x-ray fluorescence spectrometric method
- BS-ISO-13909-1 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-1-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-13909-5 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-6 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-7 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-7-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-13909-8 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-8-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-15239 - Solid mineral fuels. Evaluation of the measurement performance of on-line analysers
- BS-ISO-18283 - Coal and coke. Manual sampling
- BS-ISO-18806 - Solid mineral fuels. Determination of chlorine content
- BS-ISO-18894-TC - Tracked Changes. Coke. Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)
- BS-ISO-1928 - Coal and coke. Determination of gross calorific value
- BS-ISO-1952 - Solid mineral fuels. Determination of extractable metals in dilute hydrochloric acid
- BS-ISO-1953 - Hard coal. Size analysis by sieving
- BS-ISO-19579 - Solid mineral fuels. Determination of sulfur by IR spectrometry
- BS-ISO-20336 - Solid mineral fuels. Determination of total sulfur by Coulomb titration method
- BS-ISO-334 - Coal and coke. Determination of total sulfur. Eschka method
- BS-ISO-540 - Hard coal and coke. Determination of ash fusibility
- BS-ISO-556 - Coke (greater than 20 mm in size). Determination of mechanical strength
- BS-ISO-567 - Coke. Determination of bulk density in a small container
- BS-ISO-567-TC - Tracked Changes. Coke. Determination of bulk density in a small container
- BS-ISO-579 - Coke. Determination of total moisture
- BS-ISO-616 - Coke. Determination of shatter indices
- BS-ISO-622 - Solid mineral fuels. Determination of phosphorus content. Reduced molybdophosphate photometric method
- BS-ISO-687 - Coke. Determination of moisture in the general analysis test sample
- BS-ISO-687-TC - Tracked Changes. Coke. Determination of moisture in the general analysis test sample
- BS-ISO-7404-2 - Methods for the petrographic analysis of coals
- BS-ISO-7404-4 - Methods for the petrographic analysis of coals
- BS-ISO-812 - Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
- BS-ISO-812-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
- BS-ISO-925 - Solid mineral fuels. Determination of carbonate carbon content. Gravimetric method
- DD-CEN-14588 - Solid Biofuels, Terminology, Definitions & Descriptions
- DD-CEN-14774-1 - Solid biofuels. Methods for the determination of moisture content. Oven dry method
- DD-CEN-14774-2 - Solid biofuels. Methods for the determination of moisture content. Oven dry method. Total moisture. Simplified method
- DD-CEN-14774-3 - Solid biofuels. Methods for the determination of moisture content. Oven dry method
- DD-CEN-14775 - Solid biofuels. Method for the determination of ash content
- DD-CEN-14778-1 - Solid biofuels. Sampling
- DD-CEN-14778-2 - Solid biofuels. Sampling
- DD-CEN-14779 - Solid Biofuels, Sampling, Methods for Preparing Sampling Plans & Sampling Certificates
- DD-CEN-14780 - Solid biofuels. Methods for sample preparation
- DD-CEN-14918 - Solid Biofuels, Method for the Determination of Calorific Value
- DD-CEN-14961 - Solid biofuels. Fuel specifications and classes
- DD-CEN-15103 - Solid biofuels. Methods for the determination of bulk density
- DD-CEN-15104 - Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
- DD-CEN-15105 - Solid biofuels. Methods for determination of the water soluble content of chloride, sodium and potassium
- DD-CEN-15148 - Solid biofuels. Method for the determination of the content of volatile matter
- DD-CEN-15149-1 - Solid biofuels. Methods for the determination of particle size distribution
- DD-CEN-15149-2 - Solid biofuels. Methods for the determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
- DD-CEN-15149-3 - Solid biofuels. Methods for the determination of particle size distribution. Rotary screen method
- DD-CEN-15150 - Solid biofuels. Methods for the determination of particle density
- DD-CEN-15210-1 - Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes
- DD-CEN-15210-2 - Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes
- DD-CEN-15234 - Solid biofuels. Fuel quality assurance
- DD-CEN-15289 - Solid biofuels. Determination of total content of sulphur and chlorine
- DD-CEN-15290 - Solid biofuels. Determination of major elements
- DD-CEN-15296 - Solid biofuels. Calculation of analyses to different bases
- DD-CEN-15297 - Solid biofuels. Determination of minor elements
- DD-CEN-15357 - Solid recovered fuels. Terminology, definitions and descriptions
- DD-CEN-15358 - Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
- DD-CEN-15359 - Solid recovered fuels. Specifications and classes
- DD-CEN-15370-1 - Solid biofuels. Method for the determination of ash melting behaviour
- DD-CEN-15400 - Solid recovered fuels. Methods for the determination of calorific value
- DD-CEN-15401 - Solid recovered fuels. Determination of bulk density
- DD-CEN-15402 - Solid recovered fuels. Methods for the determination of the content of volatile matter
- DD-CEN-15403 - Solid recovered fuels. Methods for the determination of ash content
- DD-CEN-15404 - Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures
- DD-CEN-15405 - Solid recovered fuels. Determination of density of pellets and briquettes
- DD-CEN-15406 - Solid recovered fuels. Determination of bridging properties of bulk material
- DD-CEN-15407 - Solid recovered fuels. Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
- DD-CEN-15408 - Solid Recovered Fuels, Methods for the Determination of Sulphur (S), Chlorine (CI), Fl
- DD-CEN-15410 - Solid Recovered Fuels, Method for the Determination of the Content of Major Elements (
- DD-CEN-15411 - Solid Recovered Fuels, Methods for the Determination of the Content of Trace Elements
- DD-CEN-15412 - Solid recovered fuels. Methods for the determination of metallic aluminium
- DD-CEN-15413 - Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- DD-CEN-15414-1 - Solid recovered fuels. Determination of moisture content using the oven dry method
- DD-CEN-15414-2 - Solid recovered fuels. Determination of moisture content using the oven dry method
- DD-CEN-15414-3 - Solid recovered fuels. Determination of moisture content using the oven dry method
- DD-CEN-15415 - Solid recovered fuels. Determination of particle size and particle size distribution by screen method
- DD-CEN-15439 - Biomass gasification. Tar and particles in product gases. Sampling and analysis
- DD-CEN-15440 - Solid recovered fuels. Method for the determination of biomass content
- DD-CEN-15442 - Solid Recovered Fuels, Methods for Sampling
- DD-CEN-15443 - Solid recovered fuels. Methods for laboratory sample preparation
- DD-CEN-15639 - Solid recovered fuels. Determination of mechanical durability of pellets
- DD-CEN-15747 - Solid recovered fuels. 14C-based methods for the determination of the biomass content
- DD-ISO-11725 - Solid Mineral Fuels, Determination of Nitrogen, Semi-Micro Gasification Method
- DD-ISO-12902 - Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
- PD-CEN-14745 - Solid recovered fuels
- PD-CEN-15149-3 - Solid biofuels. Determination of particle size distribution
- PD-CEN-15508 - Key properties on solid recovered fuels to be used for establishing a classification system
- PD-CEN-15569 - Solid biofuels. A guide for a quality assurance system
- PD-CEN-15591 - Solid recovered fuels. Determination of the biomass content based on the 14C method
- PD-CEN-15716 - Solid recovered fuels. Determination of combustion behaviour
- PD-CEN-ISO-21911-2 - Solid recovered fuels. Determination of self-heating
- PD-ISO-13605 - Solid mineral fuels. Major and minor elements in hard coal ash and coke ash. Wavelength dispersive X-ray fluorescence spectrometric method
- PD-ISO-16996 - Solid biofuels. Determination of elemental composition by X-ray fluorescence
- PD-ISO-17225-8 - Solid biofuels. Fuel specifications and classes
- PD-ISO-21916 - Solid recovered fuels. Guidance for the specification of solid recovered fuels (SRF) for selected uses
- PD-ISO-4667 - Coal. Determination of the thermal stability and thermal fragmentation
- PD-ISO-4676 - Coal. Determination of carboxyreactivity
ISO:
- ISO-1013 - Coke - Determination of bulk density in a large container
- ISO-1014 - Coke - Determination of true relative density, apparent relative density and porosity
- ISO-1170 - Coal and coke - Calculation of analyses to different bases
- ISO-1171 - Coal and coke - Determination of ash
- ISO-11725 - Solid mineral fuels - Determination of nitrogen - Semi-micro gasification method
- ISO-11726 - Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
- ISO-1213-2 - Coal and coke - Vocabulary - Part 2: Terms relating to sampling, testing and analysis
- ISO-13605 - Solid mineral fuels - Major and minor elements in coal ash and coke ash - Wavelength dispersive x-ray fluorescence spectrometric method
- ISO-13909-1 - Hard coal and coke - Mechanical sampling - Part 1: General introduction
- ISO-13909-5 - Hard coal and coke - Mechanical sampling - Part 5: Coke - Sampling from moving streams
- ISO-13909-6 - Hard coal and coke - Mechanical sampling - Part 6: Coke - Preparation of test samples
- ISO-13909-7 - Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing
- ISO-13909-8 - Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias
- ISO-15239 - Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
- ISO-16559 - Solid biofuels - Vocabulary
- ISO-16948 - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen
- ISO-16967 - Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
- ISO-16968 - Solid biofuels - Determination of minor elements
- ISO-16993 - Solid biofuels - Conversion of analytical results from one basis to another
- ISO-16994 - Solid biofuels - Determination of total content of sulfur and chlorine
- ISO-16995 - Solid biofuels - Determination of the water soluble chloride, sodium and potassium content
- ISO-16996 - Solid biofuels - Determination of elemental composition by X-ray fluorescence
- ISO-17225-1 - Solid biofuels - Fuel specifications and classes - Part 1: General requirements
- ISO-17225-2 - Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets
- ISO-17225-3 - Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes
- ISO-17225-4 - Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips
- ISO-17225-5 - Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood
- ISO-17225-6 - Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets
- ISO-17225-7 - Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes
- ISO-17225-8 - Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use
- ISO-17827-1 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
- ISO-17827-2 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below
- ISO-17828 - Solid biofuels - Determination of bulk density
- ISO-17829 - Solid Biofuels - Determination of length and diameter of pellets
- ISO-17830 - Solid biofuels - Particle size distribution of disintegrated pellets
- ISO-17831-1 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- ISO-17831-2 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
- ISO-18123 - Solid biofuels - Determination of volatile matter
- ISO-18134 - Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- ISO-18134-1 - Solid biofuels - Determination of moisture content - Part 1: Reference method
- ISO-18134-2 - Solid biofuels - Determination of moisture content - Part 2: Simplified method
- ISO-18283 - Coal and coke - Manual sampling
- ISO-18806 - Solid mineral fuels - Determination of chlorine content
- ISO-18846 - Solid biofuels - Determination of fines content in samples of pellets
- ISO-18847 - Solid biofuels - Determination of particle density of pellets and briquettes
- ISO-18894 - Coke - Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)
- ISO-1928 - Coal and coke - Determination of gross calorific value
- ISO-19579 - Solid mineral fuels - Determination of sulfur by IR spectrometry
- ISO-20336 - Solid mineral fuels - Determination of total sulfur by Coulomb titration method
- ISO-21398 - Hard coal and coke - Guidance to the inspection of mechanical sampling systems
- ISO-21637 - Solid recovered fuels - Vocabulary
- ISO-21640 - Solid recovered fuels - Specifications and classes
- ISO-21644 - Solid recovered fuels - Methods for the determination of biomass content
- ISO-21645 - Solid recovered fuels - Methods for sampling
- ISO-21646 - Solid recovered fuels - Sample preparation
- ISO-21654 - Solid recovered fuels - Determination of calorific value
- ISO-21656 - Solid recovered fuels - Determination of ash content
- ISO-21660-3 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- ISO-21663 - Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- ISO-21911-1 - Solid recovered fuels - Determination of self-heating - Part 1: Isothermal calorimetry
- ISO-21911-2 - Solid recovered fuels - Determination of self-heating - Part 2: Basket heating tests
- ISO-21912 - Solid recovered fuels - Safe handling and storage of solid recovered fuels
- ISO-21916 - Solid recovered fuels - Guidance for the specification of solid recovered fuels (SRF) for selected uses
- ISO-22167 - Solid recovered fuels - Determination of content of volatile matter
- ISO-22940 - Solid recovered fuels - Determination of elemental composition by X-ray fluorescence
- ISO-2309 - Coke - Sampling
- ISO-2325 - Coke - Size analysis (Nominal top size 20 mm or less)
- ISO-23873 - Hard coal - Method for the measurement of the swelling of hard coal using a dilatometer
- ISO-29541 - Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- ISO-334 - Solid mineral fuels - Determination of total sulfur - Eschka method
- ISO-351 - Technical Corrigendum 1
- ISO-352 - Solid mineral fuels - Determination of chlorine - High temperature combustion method
- ISO-4667 - Coal - Determination of the thermal stability and thermal fragmentation
- ISO-4676 - Coal - Determination of carboxyreactivity
- ISO-540 - Hard coal and coke - Determination of ash fusibility
- ISO-556 - Coke (greater than 20 mm in size) - Determination of mechanical strength
- ISO-562 - Hard coal and coke - Determination of volatile matter
- ISO-567 - Coke - Determination of bulk density in a small container
- ISO-579 - Coke - Determination of total moisture
- ISO-587 - Solid mineral fuels - Determination of chlorine using Eschka mixture
- ISO-601 - Solid mineral fuels - Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590
- ISO-609 - Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
- ISO-616 - Coke - Determination of shatter indices
- ISO-622 - Solid mineral fuels - Determination of phosphorus content - Reduced molybdophosphate photometric method
- ISO-625 - Solid mineral fuels - Determination of carbon and hydrogen - Liebig method
- ISO-687 - Coke - Determination of moisture in the general analysis test sample
- ISO-728 - Coke - Size analysis by sieving
- ISO-925 - Solid mineral fuels - Determination of carbonate carbon content - Gravimetric method
- ISO/DIS-540 - Hard Coal and Coke - Determination of Ash Fusibility
- SS-EN-ISO-21911-1 - Solid recovered fuels - Determination of self-heating - Part 1: Isothermal calorimetry (ISO 21911-1:2022)
Other SDOs:
- BS-ISO-587 - Coal and coke. Determination of chlorine using Eschka mixture
- DIN-51725 - Testing of Solid Fuels - Determination of the Phosphorus Content
- DIN-51726 - Testing of Solid Fuels - Determination of the Carbonate Carbon Dioxide Content
- DIN-51727 - Testing of solid fuels - Determination of chlorine content
- DIN-51900-3 - Part 3: Method Using Adiabatic Jacket, Testing of Solid & Liquid Fuels - Determination
- DIN-EN-15536 - Derivatives From Coal Pyrolysis - Coal Tar Based Oils: Wash Oils - Specifications & T
- DIN-EN-1860-1 - Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods; German version EN 1860-1:2013+A1:2017
- DIN-EN-1860-1/A1 - Appliances, solid fuels and firelighters for barbecuing - Part 1: Barbecues burning solid fuels - Requirements and test methods; German version EN 1860-1:2003/A1:2006
- DIN-EN-1860-2 - Part 2: Barbecue Charcoal & Barbecue Charcoal Briquettes - Requirements & Test Methods
- DIN-EN-1860-3 - Part 3: Firelighters for Igniting Solid Fuels for Use in Barbecue Appliances - Require
- DIN-EN-1860-3/A1 - Amendment 1: Appliances, Solid Fuels & Firelighters for Barbecuing - Part 3: Firelight
- DIN-EN-1860-4 - Part 4: Single Use Barbecues Burning Solid Fuels - Requirements & Test Methods, Applia
- EN-14774-1 - Part 1: Total Moisture - Reference Method, Solid Biofuels - Determination of Moisture
- EN-14774-2 - Part 2: Total Moisture - Simplified Method, Solid Biofuels - Determination of Moisture
- EN-14774-3 - Part 3: Moisture in General Analysis Sample, Solid Biofuels - Determination of Moistu
- EN-14775 - Solid biofuels - Determination of ash content
- EN-14778 - Solid biofuels - Sampling
- EN-14918 - Solid biofuels - Determination of calorific value
- EN-14961-1 - Part 1: General Requirements, Solid Biofuels - Fuel Specifications & Classes
- EN-14961-2 - Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
- EN-14961-3 - Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
- EN-14961-4 - Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
- EN-14961-5 - Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
- EN-14961-6 - Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
- EN-15103 - Solid Biofuels - Determination of Bulk Density
- EN-15104 - Solid Biofuels - Determination of Total Content of Carbon, Hydrogen & Nitrogen - Instr
- EN-15105 - Solid Biofuels - Determination of the Water Soluble Chlorine, Sodium & Potassium Conte
- EN-15148 - Solid Biofuels - Determination of the Content of Volatile Matter
- EN-15150 - Solid biofuels - Determination of particle density
- EN-15210-1 - Part 1: Pellets, Solid Biofuels - Determination of Mechanical Durability of Pellets &
- EN-15234-1 - Solid biofuels - Fuel quality assurance - Part 1: General requirements
- EN-15234-2 - Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
- EN-15234-3 - Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
- EN-15234-4 - Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
- EN-15234-5 - Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
- EN-15234-6 - Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
- EN-15289 - Solid Biofuels - Determination of Total Content of Sulfur & Chlorine
- EN-15290 - Solid Biofuels - Determination of Major Elements - Ai, Ca, Fe, mg, P, K, Si, Na & Ti
- EN-15296 - Solid Biofuels - Conversion of Analytical Results From One Basis To Another
- EN-15297 - Solid Biofuels - Determination of Minor Elements - as, Cd, Co, Cr, Cu, Hg, Mn, Mo, NI,
- EN-15357 - Solid recovered fuels - Terminology, definitions and descriptions
- EN-15358 - Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
- EN-15359 - Solid recovered fuels - Specifications and classes
- EN-15400 - Solid recovered fuels - Determination of calorific value
- EN-15402 - Solid recovered fuels - Determination of the content of volatile matter
- EN-15403 - Solid recovered fuels - Determination of ash content
- EN-15407 - Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
- EN-15408 - Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
- EN-15411 - Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
- EN-15413 - Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- EN-15414-3 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- EN-15415-1 - Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- EN-15415-2 - Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- EN-15415-3 - Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- EN-15440 - Solid recovered fuels - Methods for the determination of biomass content
- EN-15442 - Solid recovered fuels - Methods for sampling
- EN-15443 - Solid recovered fuels - Methods for the preparation of the laboratory sample
- EN-15529 - Derivatives from coal pyrolysis - Terminology
- EN-15536 - Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods
- EN-15590 - Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
- EN-16126 - Solid biofuels - Determination of particle size distribution of disintegrated pellets
- EN-16127 - Solid biofuels - Determination of length and diameter of pellets
- EN-1860-1 - Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
- EN-1860-1/A1 - Appliances, Solid Fuels and Firelighters for Barbecuing - Part 1: Barbecues Burning Soli
- EN-1860-2 - Part 2: Barbecue Charcoal & Barbecue Charcoal Briquettes - Requirements & Test Methods
- EN-1860-3 - Part 3: Firelighters for Igniting Solid Fuels for Use in Barbecue Appliances - Require
- EN-1860-3/A1 - Appliances, Solid Fuels and Firelighters for Barbecuing - Part 3: Firelighters for Ignit
- EN-1860-4 - Part 4: Single Use Barbecues Burning Solid Fuels - Requirements & Test Methods, Applia
- EN-ISO-16559 - Solid biofuels - Terminology, definitions and descriptions
- EN-ISO-16948 - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen
- EN-ISO-16967 - Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
- EN-ISO-16968 - Solid biofuels - Determination of minor elements
- EN-ISO-16993 - Solid biofuels - Conversion of analytical results from one basis to another
- EN-ISO-16994 - Solid biofuels - Determination of total content of sulfur and chlorine
- EN-ISO-16995 - Solid biofuels - Determination of the water soluble chloride, sodium and potassium content
- EN-ISO-17225-1 - Solid biofuels - Fuel specifications and classes - Part 1: General requirements
- EN-ISO-17225-2 - Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2014)
- EN-ISO-17225-3 - Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2014)
- EN-ISO-17225-4 - Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips
- EN-ISO-17225-5 - Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2014)
- EN-ISO-17225-6 - Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2014)
- EN-ISO-17225-7 - Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2014)
- EN-ISO-17827-1 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
- EN-ISO-17827-2 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below
- EN-ISO-17828 - Solid biofuels - Determination of bulk density
- EN-ISO-17829 - Solid biofuels - Determination of length and diameter of pellets
- EN-ISO-17830 - Solid biofuels - Particle size distribution of disintegrated pellets
- EN-ISO-17831-1 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- EN-ISO-17831-2 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
- EN-ISO-18122 - Solid biofuels - Determination of ash content
- EN-ISO-18123 - Solid biofuels - Determination of the content of volatile matter
- EN-ISO-18134-1 - Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
- EN-ISO-18134-2 - Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
- EN-ISO-18134-3 - Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- EN-ISO-18846 - Solid biofuels - Determination of fines content in quantities of pellets
- EN-ISO-18847 - Solid biofuels - Determination of particle density of pellets and briquettes
- SIS-CEN-ISO/TS-21596 - Solid biofuels - Determination of grindability - Hardgrove type method for thermally treated biomass fuels (ISO/TS 21596:2021)
- SIS-CEN/TR-14980 - Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF
- SIS-CEN/TR-15404 - Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures
- SIS-CEN/TS-14588 - Solid biofuels - Terminology, definitions and descriptions
- SIS-CEN/TS-14774-1 - Solid biofuels - Methods for determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
- SIS-CEN/TS-14774-2 - Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
- SIS-CEN/TS-14774-3 - Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- SIS-CEN/TS-14775 - Solid biofules - Method for the determination of ash content
- SIS-CEN/TS-14778-1 - Solid biofuels - Sampling - Part 1: Methods for sampling
- SIS-CEN/TS-14778-2 - Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries
- SIS-CEN/TS-14779 - Solid biofuels - Sampling - Methods for preparing sampling plans and sampling certificates
- SIS-CEN/TS-14780 - Solid biofuels - Methods for sample preparation
- SIS-CEN/TS-14918 - Solid Biofuels - Method for the determination of calorific value
- SIS-CEN/TS-14961 - Solid biofuels - Fuel specifications and classes
- SIS-CEN/TS-15103 - Solid biofuels - Methods for the determination of bulk density
- SIS-CEN/TS-15104 - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- SIS-CEN/TS-15105 - Solid biofuels - Methods for determination of the water soluble content of chloride, sodium and potassium
- SIS-CEN/TS-15148 - Solid biofuels - Method for the determination of the content of volatile matter
- SIS-CEN/TS-15149-1 - Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above
- SIS-CEN/TS-15149-2 - Solid biofuels - Methods for the determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm end below
- SIS-CEN/TS-15149-3 - Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method
- SIS-CEN/TS-15150 - Solid biofuels - Methods for the determination of particle density
- SIS-CEN/TS-15210-1 - Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- SIS-CEN/TS-15210-2 - Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
- SIS-CEN/TS-15234 - Solid biofuels - Fuel quality assurance
- SIS-CEN/TS-15289 - Solid Biofuels - Determination of total content of sulphur and chlorine
- SIS-CEN/TS-15290 - Solid Biofuels - Determination of major elements
- SIS-CEN/TS-15296 - Solid Biofuels - Calculation of analyses to different bases
- SIS-CEN/TS-15297 - Solid Biofuels - Determination of minor elements
- SIS-CEN/TS-15357 - Solid recovered fuels - Terminology, definitions and descriptions
- SIS-CEN/TS-15358 - Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
- SIS-CEN/TS-15359 - Solid recovered fuels - Specifications and classes
- SIS-CEN/TS-15370-1 - Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method
- SIS-CEN/TS-15400 - Solid recovered fuels - Methods for the determination of calorific value
- SIS-CEN/TS-15401 - Solid recovered fuels - Determination of bulk density
- SIS-CEN/TS-15402 - Solid recovered fuels - Methods for the determination of the content of volatile matter
- SIS-CEN/TS-15403 - Solid recovered fuels - Methods for the determination of ash content
- SIS-CEN/TS-15404 - Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures
- SIS-CEN/TS-15405 - Solid recovered fuels - Determination of density of pellets and briquettes
- SIS-CEN/TS-15406 - Solid recovered fuels - Determination of bridging properties of bulk material
- SIS-CEN/TS-15407 - Solid recovered fuels - Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
- SIS-CEN/TS-15408 - Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
- SIS-CEN/TS-15410 - Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
- SIS-CEN/TS-15411 - Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
- SIS-CEN/TS-15412 - Solid recovered fuels - Methods for the determination of metallic aluminium
- SIS-CEN/TS-15413 - Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- SIS-CEN/TS-15414-1 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method
- SIS-CEN/TS-15414-2 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture by a simplified method
- SIS-CEN/TS-15414-3 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- SIS-CEN/TS-15415 - Solid recovered fuels - Determination of particle size distribution by screen method
- SIS-CEN/TS-15440 - Solid recovered fuels - Method for the determination of biomass content
- SIS-CEN/TS-15442 - Solid recovered fuels - Methods for sampling
- SIS-CEN/TS-15443 - Solid recovered fuels - Methods for laboratory sample preparation
- SIS-CEN/TS-15747 - Solid recovered fuels - 14C-based methods for the determination of the biomass content
- SIS-ISO/TR-21916 - Solid recovered fuels - Specifications and guidelines for reference SRFs (ISO/TR 21916:2021)
- SIS-ISO/TR-23437 - Solid biofuels - Determination of bridging behaviour of bulk biofuels
- SIS-ISO/TS-16996 - Solid biofuels - Determination of elemental composition by X-ray fluorescence
- SIS-ISO/TS-17225-9 - Solid biofuels - Fuel specifications and classes - Part 9: Graded hog fuel and wood chips for industrial use (ISO/TS 17225-9:2020)
- SS-187106 - Biofuels and peat - Terminology
- SS-187154 - Solid mineral fuels - Determination of chlorine using Eschka mixture
- SS-187155 - Hard coal - Determination of total moisture
- SS-187157 - Solid mineral fuels - Determination of ash
- SS-187161 - Solid mineral fuels - Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590
- SS-187162 - Solid mineral fuels - Determination of phosphorous content - Reduced molybdophosphate photometric method
- SS-187164 - Coal - Determination of the crucibel swelling number
- SS-187167 - Solid mineral fuels - Determination of carbon dioxide content - Gravimetric method
- SS-187169 - Coal - Determination of oxygen content
- SS-187183 - Coal and coke - Calculation of analyses to different bases
- SS-EN-14155 - Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods
- SS-EN-14156 - Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods
- SS-EN-14260 - Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: road tars - Characteristics and test methods
- SS-EN-14261 - Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: refractory binders - Characteristics and test methods
- SS-EN-14262 - Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: briquetting pitch - Characteristics and test methods
- SS-EN-14263 - Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: carbon binder pitch - Characteristics and test methods
- SS-EN-14264 - Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: impregnating pitch - Characteristics and test methods
- SS-EN-14265 - Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: painting tar - Characteristics and test methods
- SS-EN-14266 - Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: coating tar - Characteristics and test methods
- SS-EN-14588 - Solid biofuels - Terminology, definitions and descriptions
- SS-EN-14774-1 - Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
- SS-EN-14774-2 - Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
- SS-EN-14774-3 - Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- SS-EN-14775 - Solid biofuels - Determination of ash content
- SS-EN-14778 - Solid biofuels - Sampling
- SS-EN-14780 - Solid biofuels - Sample preparation
- SS-EN-14918 - Solid Biofuels - Determination of calorific value
- SS-EN-14961-1 - Solid biofuels - Fuel specifications and classes - Part 1: General requirements
- SS-EN-14961-2 - Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
- SS-EN-14961-3 - Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non- industrial use
- SS-EN-14961-4 - Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
- SS-EN-14961-5 - Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
- SS-EN-14961-6 - Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
- SS-EN-15103 - Solid biofuels - Determination of bulk density
- SS-EN-15104 - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- SS-EN-15105 - Solid biofuels - Determination of the water soluble chloride, sodium and potassium content
- SS-EN-15148 - Solid biofuels - Determination of the content of volatile matter
- SS-EN-15149-1 - Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
- SS-EN-15149-2 - Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
- SS-EN-15150 - Solid biofuels - Determination of particle density
- SS-EN-15210-1 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- SS-EN-15210-2 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
- SS-EN-15234-1 - Solid biofuels - Fuel quality assurance - Part 1: General requirements
- SS-EN-15234-2 - Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
- SS-EN-15234-3 - Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
- SS-EN-15234-4 - Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
- SS-EN-15234-5 - Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
- SS-EN-15234-6 - Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
- SS-EN-15289 - Solid biofuels - Determination of total content of sulfur and chlorine
- SS-EN-15290 - Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
- SS-EN-15296 - Solid biofuels - Conversion of analytical results from one basis to another
- SS-EN-15297 - Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
- SS-EN-15357 - Solid recovered fuels - Terminology, definitions and descriptions
- SS-EN-15358 - Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
- SS-EN-15359 - Solid recovered fuels - Specifications and classes
- SS-EN-15400 - Solid recovered fuels - Determination of calorific value
- SS-EN-15402 - Solid recovered fuels - Determination of the content of volatile matter
- SS-EN-15403 - Solid recovered fuels - Determination of ash content
- SS-EN-15407 - Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
- SS-EN-15408 - Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
- SS-EN-15410 - Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
- SS-EN-15411 - Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
- SS-EN-15413 - Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- SS-EN-15414-3 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- SS-EN-15415-1 - Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- SS-EN-15415-2 - Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- SS-EN-15415-3 - Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- SS-EN-15440 - Solid recovered fuels - Methods for the determination of biomass content
- SS-EN-15442 - Solid recovered fuels - Methods for sampling
- SS-EN-15443 - Solid recovered fuels - Methods for the preparation of the laboratory sample
- SS-EN-15529 - Derivatives from coal pyrolysis - Terminology
- SS-EN-15536 - Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods
- SS-EN-15590 - Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
- SS-EN-16126 - Solid biofuels - Determination of particle size distribution of disintegrated pellets
- SS-EN-16127 - Solid biofuels - Determination of length and diameter of pellets
- SS-EN-1860-1 - Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
- SS-EN-1860-2 - Appliances, solid fuels and firelighters for barbecuing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods
- SS-EN-1860-3 - Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods
- SS-EN-1860-4 - Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
- SS-EN-ISO-16559 - Solid biofuels - Vocabulary (ISO 16559:2022)
- SS-EN-ISO-16948 - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015)
- SS-EN-ISO-16967 - Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti (ISO 16967:2015)
- SS-EN-ISO-16968 - Solid biofuels - Determination of minor elements (ISO 16968:2015)
- SS-EN-ISO-16993 - Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)
- SS-EN-ISO-16994 - Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016)
- SS-EN-ISO-16995 - Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015)
- SS-EN-ISO-17225-1 - Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2021)
- SS-EN-ISO-17225-2 - Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021)
- SS-EN-ISO-17225-3 - Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2021)
- SS-EN-ISO-17225-4 - Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO 17225-4:2021)
- SS-EN-ISO-17225-5 - Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2021)
- SS-EN-ISO-17225-6 - Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021)
- SS-EN-ISO-17225-7 - Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2021)
- SS-EN-ISO-17225-9 - Solid biofuels - Fuel specifications and classes - Part 9: Graded hog fuel and wood chips for industrial use (ISO 17225-9:2021)
- SS-EN-ISO-17827-1 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
- SS-EN-ISO-17827-2 - Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016)
- SS-EN-ISO-17828 - Solid biofuels - Determination of bulk density (ISO 17828:2015)
- SS-EN-ISO-17829 - Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
- SS-EN-ISO-17830 - Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
- SS-EN-ISO-17831-1 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
- SS-EN-ISO-17831-2 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO 17831-2:2015)
- SS-EN-ISO-18122 - Solid biofuels - Determination of ash content (ISO 18122:2022)
- SS-EN-ISO-18123 - Solid biofuels - Determination of volatile matter (ISO 18123:2023)
- SS-EN-ISO-18134-1 - Solid biofuels - Determination of moisture content - Part 1: Reference method (ISO 18134-1:2022)
- SS-EN-ISO-18134-2 - Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017)
- SS-EN-ISO-18134-3 - Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
- SS-EN-ISO-18135 - Solid Biofuels - Sampling (ISO 18135:2017)
- SS-EN-ISO-18846 - Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
- SS-EN-ISO-18847 - Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
- SS-EN-ISO-21637 - Solid recovered fuels - Vocabulary (ISO 21637:2020)
- SS-EN-ISO-21640 - Solid recovered fuels - Specifications and classes (ISO 21640:2021)
- SS-EN-ISO-21644 - Solid recovered fuels - Methods for the determination of biomass content (ISO 21644:2021)
- SS-EN-ISO-21645 - Solid recovered fuels - Methods for sampling (ISO 21645:2021)
- SS-EN-ISO-21646 - Solid recovered fuels - Sample preparation (ISO 21646:2022)
- SS-EN-ISO-21654 - Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
- SS-EN-ISO-21656 - Solid recovered fuels - Determination of ash content (ISO 21656:2021)
- SS-EN-ISO-21660-3 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
- SS-EN-ISO-21663 - Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
- SS-EN-ISO-21912 - Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
- SS-EN-ISO-22167 - Solid recovered fuels - Determination of content of volatile matter (ISO 22167:2021)
- SS-EN-ISO-22940 - Solid recovered fuels - Determination of elemental composition by X-ray fluorescence (ISO 22940:2021)
- SS-ISO-1171 - Solid mineral fuels - Determination of ash (ISO 1171:2010, IDT)
- SS-ISO-13909-1 - Hard coal and coke - Mechanical sampling - Part 1: General introduction (ISO 13909-1:2016, IDT)
- SS-ISO-13909-2 - Hard coal and coke - Mechanical sampling - Part 2: Coal - Sampling from moving streams (ISO 13909-2:2016, IDT)
- SS-ISO-13909-3 - Hard coal and coke - Mechanical sampling - Part 3: Coal - Sampling from stationary lots (ISO 13909-3:2016, IDT)
- SS-ISO-13909-4 - Hard coal and coke - Mechanical sampling - Part 4: Coal - Preparation of test samples (ISO 13909-4:2016, IDT)
- SS-ISO-13909-5 - Hard coal and coke - Mechanical sampling - Part 5: Coke - Sampling from moving streams (ISO 13909-5:2016, IDT)
- SS-ISO-13909-6 - Hard coal and coke - Mechanical sampling - Part 6: Coke - Preparation of test samples (ISO 13909-6:2016, IDT)
- SS-ISO-13909-7 - Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing (ISO 13909-7:2016, IDT)
- SS-ISO-13909-8 - Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias (ISO 13909-8:2016, IDT)
- SS-ISO-1928 - Solid mineral fuels - Determination of calorific value by the bomb calorimetric method, and calculation of net calorific value
- SS-ISO-22915-13 - Industrial trucks - Verification of stability - Part 13: Rough-terrain trucks with mast (ISO 22915-13:2012, IDT)
- SS-ISO-351 - Solid mineral fuels - Determination of total sulfur - High temperature combustion method
- SS-ISO-540 - Solid mineral fuels - Determination of fusibilityof ash - High-temperature tube method
- SS-ISO-562 - Hard coal and coke - Determination of volatile matter (ISO 562:1998, IDT)
- SS-ISO-589 - Hard coal -Determination of total moisture (ISO 589:2008, IDT)
- SS-ISO-609 - Solid mineral fuels - Determination of carbon andhydrogen - High temperature combustion method
- SS-ISO-625 - Solid mineral fuels - Determination of carbon andhydrogen - Liebig method
- UNE-EN-ISO-18134-1 - Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
- UNE-EN-ISO-18134-2 - Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
- UNE-EN-ISO-18134-3 - Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample