Document Center List of Standards on Equipment For Drilling And Mine Excavation Including Equipment For Seabed Mining Drilling Equipment For The Petroleum Industry, See 75.180.10
ICS Code 73.100.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D4916 - Standard Practice for Mechanical Auger Sampling (Withdrawn 2008)
- ASTM-D5781 - Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
- ASTM-D5782 - Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
- ASTM-D5783 - Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
- ASTM-D5787 - Standard Practice for Monitoring Well Protection At or Near Land Surface
- ASTM-D5850 - Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
- ASTM-D6032 - Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
- ASTM-D6151 - Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024)
- ASTM-D6286 - Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization
- ASTM-D6391 - Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
- ASTM-D8006 - Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
BSI:
- BS-4019-5 - Rotary core drilling equipment. Rotary core drilling equipment. Specification for wireline diamond drilling equipment. System A. Metric units
- BS-EN-12321 - Underground mining machinery. Specification for the safety requirements of armoured face conveyors
- BS-EN-1710 - Equipment and components intended for use in potentially explosive atmospheres in underground mines
- BS-EN-28030 - Rubber or plastics hoses for underground mining. Method of test for flammability
- BS-EN-ISO-19225 - Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems
- BS-EN-ISO-80079-38 - Explosive atmospheres
- BS-ISO-18758-2 - Mining and earth-moving machinery. Rock drill rigs and rock reinforcement rigs
- BS-ISO-19224 - Continuous surface miners (CSM). Safety requirements
ISO:
- ISO-10097-1 - Wireline diamond core drilling equipment -- System A -- Part 1: Metric units
- ISO-10097-2 - Wireline diamond core drilling equipment -- System A -- Part 2: Inch units
- ISO-10098 - Wireline diamond core drilling equipment -- System CSSK
- ISO-10207 - Rock drilling equipment -- Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
- ISO-10208 - Rock drilling equipment -- Left-hand rope threads
- ISO-1717 - Rock drilling -- Rotary drill-rods and rotary drill-bits for dry drilling -- Connecting dimensions
- ISO-1718 - Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
- ISO-1721 - Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
- ISO-1722 - Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm)
- ISO-18758-2 - Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Part 2: Safety requirements
- ISO-19224 - Continuous surface miners (CSM) - Safety requirements
- ISO-19225 - Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
- ISO-19225-AM1 - - Amendment 1
- ISO-3551-1 - Rotary core diamond drilling equipment -- System A -- Part 1: Metric units
- ISO-3551-2 - Rotary core diamond drilling equipment -- System A -- Part 2: Inch units
- ISO-3552-1 - Rotary core diamond drilling equipment -- System B -- Part 1: Metric units
- ISO-3552-2 - Rotary core diamond drilling equipment -- System B -- Part 2: Inch units
- ISO-6805 - Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification
- ISO-721 - Rock drilling equipment -- Integral stems
- ISO-722 - Rock drilling equipment - Hollow drill steels in bar form, hexagonal and round
- ISO-723 - Rock drilling equipment -- Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
- ISO-8866 - Rotary core diamond drilling equipment -- System C
Other SDOs:
- DIN-EN-12321 - Underground Mining Machinery - Specification for the Safety Requirements of Armoured
- DIN-EN-13918 - Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests; German version EN 13918:2003
- DIN-EN-1552 - Underground Mining Machines, Mobile Extracting Machines at the Face, Safety Requiremen
- DIN-EN-1710 - Equipment & Components Intended for Use in Potentially Explosive Atmospheres in Underg
- EN-12321 - Underground Mining Machinery - Specification for the Safety Requirements of Armoured
- EN-14035-21 - Part 21: Jumping Ground Spinners - Specification & Test Methods, Fireworks
- EN-1710 - Equipment & Components Intended for Use in Potentially Explosive Atmospheres in Underg
- EN-ISO-19225 - Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems
- SIS-741300 - Core drilling equipment. Assembly
- SIS-741301 - Core drilling equipment - Drill rods
- SIS-741302 - Core drilling equipment. Drill-rod couplings
- SIS-741303 - Core drilling equipment. Drill-rod substitutes
- SIS-741305 - Core drilling equipment - Fishing rods
- SIS-741306 - Core drilling equipment. Fishing-rod couplings
- SIS-741307 - Core drilling equipment. Fishing-rod substitutes
- SIS-741310 - Core drilling equipment - Casing tubes
- SIS-741311 - Core drilling equipment - Casing drive shoes
- SIS-741312 - Core drilling equipment - Casing shoe bits
- SIS-741313 - Core drilling equipment - Casing bits
- SIS-741315 - Core drilling equipment - Sediment tubes
- SIS-741320 - Core drilling equipment - Core barrels, type B. Assembly
- SIS-741321 - Core drilling equipment - Core barrels, type B. Bits
- SIS-741322 - Core drilling equipment - Core barrels, type B. Core-lifter cases
- SIS-741323 - Core drilling equipment. Core barrels, type B. Core lifters
- SIS-741324 - Core drilling equipment. Core barrels, type B. Core tubes
- SIS-741325 - Core drilling equipment. Core barrels, type B. Extension couplings
- SIS-741326 - Core drilling equipment. Core barrels, type B. Extension tubes
- SIS-741327 - Core drilling equipment. Core barrels, type B. Heads
- SIS-741328 - Core drilling equipment. Core barrels, type B. Heads with sediment-tube threads
- SIS-741330 - Core drilling equipment. Core barrels, type Z. Assembly
- SIS-741331 - Core drilling equipment. Core barrels, type Z. Bits
- SIS-741332 - Core drilling equipment. Core barrels, type Z. Core-lifter cases
- SIS-741333 - Core drilling equipment. Core barrels, type Z. Core lifters
- SIS-741334 - Core drilling equipment. Core barrels, type Z. Core-lifter couplings
- SIS-741335 - Core drilling equipment. Core barrels, type Z. Core and extension tubes
- SIS-741336 - Core drilling equipment. Core barrels, type Z. Extension couplings
- SIS-741337 - Core drilling equipment. Core barrels, type Z. Heads
- SIS-741338 - Core drilling equipment. Core barrels, type Z. Heads with sediment-tube threads
- SIS-741340 - Core drilling equipment. Double-tube core barrels, type BT (riged or swivel type). Assembly
- SIS-741341 - Core drilling equipment. Double-tube core barrels, type BT (riged or swivel type). Projection of inner tube
- SIS-741342 - Core drilling equipment. Double-tube core barrels, type BT (riged or swivel type). Core-lifter cases
- SIS-741343 - Core drilling equipment. Double-tube core barrels, type BT (riged or swivel type). Lower end of inner tube
- SIS-741344 - Core drilling equipment. Double-tube core barrels, type BT (riged or swivel type). Lower end of outer tube
- SIS-741350 - Core drilling equipment. Double-tube core barrels, type T. Bottom-discharge and swivel type. Assembly
- SIS-741351 - Core drilling equipment. Double-tube core barrels, type T. Bottom-discharge and swivel type. Projection of inner tube
- SIS-741352 - Core drilling equipment. Double-tube core barrels, type T. Bottom-discharge and swivel type. Bits
- SIS-741353 - Core drilling equipment. Double-tube core barrels, type T. Bottom-discharge and swivel type. Core-lifter cases
- SIS-741354 - Core drilling equipment. Double-tube core barrels, type T. Bottom-discharge and swivel type. Core lifters
- SIS-741355 - Core drilling equipment. Double-tube core barrels, type T. Bottom-discharge and swivel type. Lower end of inner tube
- SIS-741356 - Core drilling equipment. Double-tube core barrels, type T. Bottom-discharge and swivel type. Reaming shells
- SIS-741361 - Core drilling equipment. Threads
- SS-EN-12321 - Underground mining machinery - Specification for the safety requirements of armoured face conveyors
- SS-EN-1552 - Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
- SS-EN-1710 - Equipment and components intended for use in potentially explosive atmospheres in underground mines
- SS-EN-ISO-19225 - Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
- SS-EN-ISO-19225-AM1 - Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1 (ISO 19225:2017/Amd 1:2019)
- SS-EN-ISO/IEC-80079-38 - Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
- SS-EN-ISO/IEC-80079-38-AM1 - Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
- SS-ISO-10097-1 - Wireline diamond core drilling equipment - System A - Part 1: Metric units
- SS-ISO-10097-2 - Wireline diamond core drilling equipment - System A - Part 2: Inch units
- SS-ISO-10207 - Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
- SS-ISO-10208 - Rock drill equipment - Left-hand rope threads
- SS-ISO-1718 - Rock drilling equipment - Drill rods with tapered connection for percussive drilling
- SS-ISO-18758-1 - Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Part 1: Vocabulary (ISO 18758-1:2018, IDT)
- SS-ISO-18758-2 - Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Part 2: Safety requirements (ISO 18758-2:2018, IDT)
- SS-ISO-19224 - Continuous surface miners (CSM) - Safety requirements (ISO 19224:2017, IDT)
- SS-ISO-6805 - Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification (ISO 6805:2020, IDT)
- SS-ISO-721 - Rock drilling equipment - Integral stems
- SS-ISO-722 - Rock drilling equipment - Hollow drill steels in bar form, hexagonal and round
- SS-ISO-723 - Rock drilling equipment - Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels