Document Center List of Standards on Coals Including Lignites Coal Products, See 75.160.10
ICS Code 73.040
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D121 - Standard Terminology of Coal and Coke
- ASTM-D1412 - Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C
- ASTM-D1756 - Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal (Withdrawn 2013)
- ASTM-D1857 - Standard Test Method for Fusibility of Coal and Coke Ash
- ASTM-D197 - Standard Test Method for Sampling and Fineness Test of Pulverized Coal
- ASTM-D2013 - Standard Practice for Preparing Coal Samples for Analysis
- ASTM-D2014 - Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
- ASTM-D2234 - Standard Practice for Collection of a Gross Sample of Coal
- ASTM-D2796 - Terminology Relating to Megascopic Description of Coal and Coal Seams and Microscopical Description and Analysis of Coal (Withdrawn 1995)
- ASTM-D2797 - Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
- ASTM-D2799 - Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
- ASTM-D291 - Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
- ASTM-D409 - Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
- ASTM-D4091 - Specification for Extra-Heavy-Duty Black Chlorinated Polyethylene (CPE) Jacket for Wire and Cable (Withdrawn 1986)
- ASTM-D440 - Standard Test Method of Drop Shatter Test for Coal
- ASTM-D441 - Standard Test Method of Tumbler Test for Coal
- ASTM-D4422 - Standard Test Method for Ash in Analysis of Petroleum Coke
- ASTM-D4596 - Standard Practice for Collection of Channel Samples of Coal in a Mine
- ASTM-D4621 - Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke (Withdrawn 2010)
- ASTM-D4931 - Standard Test Method for Gross Moisture in Green Petroleum Coke
- ASTM-D5114 - Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
- ASTM-D5192 - Standard Practice for Collection of Coal Samples from Core
- ASTM-D5263 - Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
- ASTM-D5671 - Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
- ASTM-D5727 - Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
- ASTM-D5865 - Standard Test Method for Gross Calorific Value of Coal and Coke
- ASTM-D6315 - Standard Practice for Manual Sampling of Coal from Tops of Barges (Withdrawn 2003)
- ASTM-D6347 - Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
- ASTM-D6374 - Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
- ASTM-D6385 - Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
- ASTM-D6414 - Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
- ASTM-D6518 - Standard Practice for Bias Testing a Mechanical Coal Sampling System (Withdrawn 2008)
- ASTM-D6542 - Standard Practice for Tonnage Calculation of Coal in a Stockpile
- ASTM-D6543 - Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
- ASTM-D6609 - Standard Guide for Part-Stream Sampling of Coal
- ASTM-D6610 - Standard Practice for Manual Sampling Coal from Surfaces of a Stockpile (Withdrawn 2003)
- ASTM-D6721 - Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
- ASTM-D6883 - Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
- ASTM-D6945 - Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
- ASTM-D6946 - Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) (Withdrawn 2022)
- ASTM-D6948 - Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
- ASTM-D720 - Standard Test Method for Free-Swelling Index of Coal
- ASTM-D7256 - Standard Practice for Mechanical Collection and Within-System Preparation of a Gross Sample of Coal from Moving Streams (Withdrawn 2008)
- ASTM-D7430 - Standard Practice for Mechanical Sampling of Coal
- ASTM-D7569 - Standard Practice for Determination of Gas Content of Coal-Direct Desorption Method
- ASTM-D7582 - Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
- ASTM-D7846 - Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
- ASTM-D8010 - Standard Test Method for Determination of Water Soluble Alkali Content in Coal
- ASTM-D8145 - Standard Practice for Sampling of Green Petroleum Coke
- ASTM-E2243 - Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation
BSI:
- BS-1016-104.1 - Methods for analysis and testing of coal and coke. Proximate analysis
- BS-1016-104.3 - Methods for analysis and testing of coal and coke
- BS-1016-104.4 - Methods for analysis and testing of coal and coke. Proximate analysis. Determination of ash
- BS-1016-106.2 - Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke
- BS-1016-111 - Methods for analysis and testing of coal and coke
- BS-1016-112 - Methods for analysis and testing of coal and coke
- BS-3553 - Specification for graphical symbols for coal preparation plant flowsheets
- BS-6127-1 - Petrographic analysis of bituminous coal and anthracite
- BS-7067 - Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants
- BS-7530-1 - Methods for froth flotation testing of hard coal
- BS-7530-2 - Methods for froth flotation testing of hard coal
- BS-ISO-10086-1 - Coal. Methods for evaluating flocculants for use in coal preparation
- BS-ISO-1018 - Coal. Determination of moisture-holding capacity
- BS-ISO-1018-TC - Tracked Changes. Coal. Determination of moisture-holding capacity
- BS-ISO-10329 - Coal. Determination of plastic properties. Constant-torque Gieseler plastometer method
- BS-ISO-1170 - Coal and coke. Calculation of analyses to different bases
- BS-ISO-1171-TC - Tracked Changes. Coal and coke. Determination of ash
- BS-ISO-11722 - Solid mineral fuels. Hard coal. Determination of moisture in the general analysis test sample by drying in nitrogen
- BS-ISO-11723 - Solid mineral fuels. Determination of arsenic and selenium. Eschkas mixture and hydride generation method
- BS-ISO-11724 - Solid mineral fuels. Determination of total fluorine in coal, coke and fly ash
- BS-ISO-11760 - Classification of coals
- BS-ISO-11760-TC - Tracked Changes. Classification of coals
- BS-ISO-1213-1 - Coal and coke. Vocabulary
- BS-ISO-1213-2 - Coal and coke. Vocabulary
- BS-ISO-1213-2-TC - Tracked Changes. Coal and coke. Vocabulary
- BS-ISO-12900 - Hard coal. Determination of abrasiveness
- BS-ISO-12900-TC - Tracked Changes. Hard coal. Determination of abrasiveness
- BS-ISO-13605 - Solid mineral fuels. Major and minor elements in coal ash and coke ash. Wavelength dispersive x-ray fluorescence spectrometric method
- BS-ISO-13605-TC - Tracked Changes. Solid mineral fuels. Major and minor elements in coal ash and coke ash. Wavelength dispersive x-ray fluorescence spectrometric method
- BS-ISO-13909-1 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-1-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-13909-2 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-2-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-13909-3 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-3-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-13909-4 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-4-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-13909-5 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-6 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-7 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-7-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-13909-8 - Hard coal and coke. Mechanical sampling
- BS-ISO-13909-8-TC - Tracked Changes. Hard coal and coke. Mechanical sampling
- BS-ISO-14180 - Coal. Guidance on the sampling of coal seams
- BS-ISO-14180-TC - Tracked Changes. Coal. Guidance on the sampling of coal seams.
- BS-ISO-15117-1 - Coal flow properties
- BS-ISO-15237 - Solid mineral fuels. Determination of total mercury content of coal
- BS-ISO-15238 - Solid mineral fuels. Determination of total cadmium content of coal
- BS-ISO-15585 - Hard coal. Determination of caking index
- BS-ISO-17246 - Coal and coke. Proximate analysis
- BS-ISO-17246-TC - Tracked Changes. Coal and coke. Proximate analysis
- BS-ISO-17247 - Coal and coke. Ultimate analysis
- BS-ISO-18283 - Coal and coke. Manual sampling
- BS-ISO-1952 - Solid mineral fuels. Determination of extractable metals in dilute hydrochloric acid
- BS-ISO-1953 - Hard coal. Size analysis by sieving
- BS-ISO-19579 - Solid mineral fuels. Determination of sulfur by IR spectrometry
- BS-ISO-20360 - Brown coals and lignites. Determination of the volatile matter in the analysis sample: one furnace method
- BS-ISO-20904 - Hard coal. Sampling of slurries
- BS-ISO-20904-TC - Tracked Changes. Hard coal. Sampling of slurries
- BS-ISO-20905 - Coal preparation. Determination of dust/moisture relationship for coal
- BS-ISO-21398 - Hard coal and coke. Guidance to the inspection of mechanical sampling systems
- BS-ISO-23380 - Coal. Selection of methods for the determination of trace elements
- BS-ISO-23380-TC - Tracked Changes. Coal. Selection of methods for the determination of trace elements
- BS-ISO-23499 - Coal. Determination of bulk density for the use in charging of coke ovens
- BS-ISO-334 - Coal and coke. Determination of total sulfur. Eschka method
- BS-ISO-349 - Hard coal. Audibert-Arnu dilatometer test
- BS-ISO-501 - Hard coal. Determination of the crucible swelling number
- BS-ISO-502 - Coal. Determination of caking power. Gray-King coke test
- BS-ISO-5068-1 - Brown coals and lignites. Determination of moisture content
- BS-ISO-5068-2 - Brown coals and lignites. Determination of moisture content
- BS-ISO-5071-1 - Brown coals and lignites. Determination of the volatile matter in the analysis sample
- BS-ISO-5071-1-TC - Tracked Changes. Brown coals and lignites. Determination of the volatile matter in the analysis sample
- BS-ISO-5072 - Brown coals and lignites. Determination of true relative density and apparent relative density
- BS-ISO-5072-TC - Tracked Changes. Brown coals and lignites. Determination of true relative density and apparent relative density
- BS-ISO-5073 - Brown coals and lignites. Determination of humic acids
- BS-ISO-5073-TC - Tracked Changes. Brown coals and lignites. Determination of humic acids
- BS-ISO-5074 - Hard coal. Determination of Hardgrove grindability index
- BS-ISO-540 - Hard coal and coke. Determination of ash fusibility
- BS-ISO-589 - Hard coal. Determination of total moisture
- BS-ISO-602 - Coal. Determination of mineral matter
- BS-ISO-647 - Brown coals and lignites. Determination of the yields of tar, water, gas and coke residue by low temperature distillation
- BS-ISO-7404-1 - Methods for the petrographic analysis of coals
- BS-ISO-7404-2 - Methods for the petrographic analysis of coals
- BS-ISO-7404-3 - Methods for the petrographic analysis of coals
- BS-ISO-7404-5 - Methods for the petrographic analysis of coals
- BS-ISO-7936 - Coal. Determination and presentation of float and sink characteristics. General directions for apparatus and procedures
- BS-ISO-8858-1 - Hard coal. Froth flotation testing
- BS-ISO-8858-2 - Coal. Froth flotation testing
- BS-ISO-8858-3 - Hard coal. Froth flotation testing
- BS-ISO-923 - Coal. Density separation equipment for coal. Performance evaluation
- BS-ISO-975 - Brown coals and lignites. Determination of yield of benzene-soluble extract. Semi-automatic method
- BS-ISO-975-TC - Tracked Changes. Brown coals and lignites. Determination of yield of benzene-soluble extract. Semi-automatic method
- DD-ISO-12902 - Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
- PD-ISO-13605 - Solid mineral fuels. Major and minor elements in hard coal ash and coke ash. Wavelength dispersive X-ray fluorescence spectrometric method
- PD-ISO-20362 - Hard Coal. Determination of plastometric indices. Automated Sapozhnikov Penetration Plastometer method
- PD-ISO-4667 - Coal. Determination of the thermal stability and thermal fragmentation
- PD-ISO-4676 - Coal. Determination of carboxyreactivity
- PD-ISO-4699 - Hard Coal. Determination of plastometric indices. Manual method
ISO:
- ISO-10086-1 - Coal - Methods for evaluating flocculants for use in coal preparation - Part 1: Basic parameters
- ISO-10086-2 - Coal - Methods for evaluating flocculants for use in coal preparation - Part 2: Flocculants as filter aids in rotary vacuum filtration systems
- ISO-1015 - Brown coals and lignites -- Determination of moisture content -- Direct volumetric method
- ISO-1017 - Brown coals and lignites - Determination of acetone-soluble material (resinous substance) in the benzene-soluble extract
- ISO-1018 - Coal - Determination of moisture-holding capacity
- ISO-10329 - Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method
- ISO-1170 - Coal and coke - Calculation of analyses to different bases
- ISO-11722 - Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen
- ISO-11723 - Solid mineral fuels - Determination of arsenic and selenium - Eschkas mixture and hydride generation method
- ISO-11724 - Solid mineral fuels - Determination of total fluorine in coal, coke and fly ash
- ISO-11760 - Classification of coals
- ISO-1213-1 - Coal and coke - Vocabulary - Part 1: Terms relating to coal preparation
- ISO-1213-2 - Coal and coke - Vocabulary - Part 2: Terms relating to sampling, testing and analysis
- ISO-12900 - Hard coal - Determination of abrasiveness
- ISO-13605 - Solid mineral fuels - Major and minor elements in coal ash and coke ash - Wavelength dispersive x-ray fluorescence spectrometric method
- ISO-13909-1 - Hard coal and coke - Mechanical sampling - Part 1: General introduction
- ISO-13909-2 - Hard coal and coke - Mechanical sampling - Part 2: Coal - Sampling from moving streams
- ISO-13909-3 - Hard coal and coke - Mechanical sampling - Part 3: Coal - Sampling from stationary lots
- ISO-13909-4 - Hard coal and coke - Mechanical sampling - Part 4: Coal - Preparation of test samples
- ISO-13909-7 - Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing
- ISO-13909-8 - Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias
- ISO-14180 - Coal - Guidance on the sampling of coal seams
- ISO-15117-1 - Coal flow properties - Part 1: Bin flow
- ISO-15237 - Solid mineral fuels - Determination of total mercury content of coal
- ISO-15238 - Solid mineral fuels - Determination of total cadmium content of coal
- ISO-15585 - Hard coal - Determination of caking index
- ISO-157 - Coal -- Determination of forms of sulfur
- ISO-17246 - Coal and coke - Proximate analysis
- ISO-17247 - Coal - Ultimate analysis
- ISO-18283 - Coal and coke - Manual sampling
- ISO-1952 - Solid mineral fuels - Determination of extractable metals in dilute hydrochloric acid
- ISO-1953 - Hard coal - Size analysis by sieving
- ISO-19579 - Solid mineral fuels - Determination of sulfur by IR spectrometry
- ISO-20360 - Brown coals and lignites - Determination of the volatile matter in the analysis sample: one furnace method
- ISO-20362 - Hard coal - Determination of plastometric indices - Automated Sapozhnikov penetration plastometer method
- ISO-20904 - Hard coal - Sampling of slurries
- ISO-20905 - Coal preparation - Determination of dust/moisture relationship for coal
- ISO-21398 - Hard coal and coke - Guidance to the inspection of mechanical sampling systems
- ISO-23380 - Coal - Selection of methods for the determination of trace elements - Guidance and requirements
- ISO-23499 - Coal - Determination of bulk density for the use in charging of coke ovens
- ISO-23604 - Method of determining specific surface area of coal
- ISO-23873 - Hard coal - Method for the measurement of the swelling of hard coal using a dilatometer
- ISO-2950 - Brown coals and lignites -- Classification by types on the basis of total moisture content and tar yield
- ISO-29541 - Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- ISO-334 - Solid mineral fuels - Determination of total sulfur - Eschka method
- ISO-349 - Hard coal - Audibert-Arnu dilatometer test
- ISO-4667 - Coal - Determination of the thermal stability and thermal fragmentation
- ISO-4676 - Coal - Determination of carboxyreactivity
- ISO-4699 - Hard Coal - Determination of plastometric indices - Manual method
- ISO-501 - Hard coal - Determination of the crucible swelling number
- ISO-502 - Coal - Determination of caking power - Gray-King coke test
- ISO-5068-1 - Brown coals and lignites - Determination of moisture content - Part 1: Indirect gravimetric method for total moisture
- ISO-5068-2 - Brown coals and lignites - Determination of moisture content - Part 2: Indirect gravimetric method for moisture in the analysis sample
- ISO-5069-1 - Brown coals and lignites -- Principles of sampling -- Part 1 : Sampling for determination of moisture content and for general analysis
- ISO-5069-2 - Brown coals and lignites -- Principles of sampling -- Part 2 : Sample preparation for determination of moisture content and for general analysis
- ISO-5071-1 - Brown coals and lignites - Determination of the volatile matter in the analysis sample - Part 1: Two-furnace method
- ISO-5072 - Brown coals and lignites - Determination of true relative density and apparent relative density
- ISO-5073 - Brown coals and lignites - Determination of humic acids
- ISO-5074 - Hard coal - Determination of Hardgrove grindability index
- ISO-540 - Hard coal and coke - Determination of ash fusibility
- ISO-562 - Hard coal and coke - Determination of volatile matter
- ISO-589 - Hard coal - Determination of total moisture
- ISO-602 - Coal - Determination of mineral matter
- ISO-609 - Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
- ISO-625 - Solid mineral fuels - Determination of carbon and hydrogen - Liebig method
- ISO-647 - Brown coals and lignites - Determination of the yields of tar, water, gas and coke residue by low temperature distillation
- ISO-7404-1 - Methods for the petrographic analysis of coals - Part 1: Vocabulary
- ISO-7404-2 - Methods for the petrographic analysis of coals - Part 2: Methods of preparing coal samples
- ISO-7404-3 - Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
- ISO-7404-4 - Methods for the petrographic analysis of coals - Part 4: Method of determining microlithotype, carbominerite and minerite composition
- ISO-7404-5 - Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite
- ISO-7936 - Coal - Determination and presentation of float and sink characteristics - General directions for apparatus and procedures
- ISO-8264 - Hard coal -- Determination of the swelling properties using a dilatometer
- ISO-8833 - Magnetite for use in coal preparation -- Test methods
- ISO-8858-1 - Hard coal - Froth flotation testing - Part 1: Laboratory procedure
- ISO-8858-2 - Coal - Froth flotation testing - Part 2: Sequential evaluation
- ISO-8858-3 - Hard coal - Froth flotation testing - Part 3: Release evaluation
- ISO-975 - Brown coals and lignites - Determination of yield of benzene-soluble extract - Semi-automatic method
- ISO-9931 - Coal -- Sampling of pulverized coal conveyed by gases in direct fired coal systems
- ISO/DIS-23380 - Guidance To the Determination of Trace Elements in Coal
Other SDOs:
- BS-ISO-15237-TC - Tracked Changes. Solid mineral fuels. Determination of total mercury content of coal
- SS-187121 - Hard coal - Sampling from conveyor belts
- SS-187122 - Hard coal - Sampling from trucks and railway wagons
- SS-187133 - Hard coal - Sample preparation
- SS-187152 - Hard coal - Determination of moisture in the analysis sample - Dire volumetric method
- SS-187156 - Coal - Determination of mineral matter
- SS-187163 - Coal - Determination of nitrogen - Macro Kjeldahlmethod
- SS-187168 - Coal and coke - Determination of carbon and hydrogen - High temperature combustion method
- SS-ISO-13909-1 - Hard coal and coke - Mechanical sampling - Part 1: General introduction (ISO 13909-1:2016, IDT)
- SS-ISO-13909-2 - Hard coal and coke - Mechanical sampling - Part 2: Coal - Sampling from moving streams (ISO 13909-2:2016, IDT)
- SS-ISO-13909-3 - Hard coal and coke - Mechanical sampling - Part 3: Coal - Sampling from stationary lots (ISO 13909-3:2016, IDT)
- SS-ISO-13909-4 - Hard coal and coke - Mechanical sampling - Part 4: Coal - Preparation of test samples (ISO 13909-4:2016, IDT)
- SS-ISO-13909-5 - Hard coal and coke - Mechanical sampling - Part 5: Coke - Sampling from moving streams (ISO 13909-5:2016, IDT)
- SS-ISO-13909-6 - Hard coal and coke - Mechanical sampling - Part 6: Coke - Preparation of test samples (ISO 13909-6:2016, IDT)
- SS-ISO-13909-7 - Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing (ISO 13909-7:2016, IDT)
- SS-ISO-13909-8 - Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias (ISO 13909-8:2016, IDT)
- SS-ISO-333 - Coal - Determination of nitrogen - Semi-micro Kjeldahl method
- SS-ISO-5074 - Hard coal - Determination of Hardgrove grindability index
- SS-ISO-562 - Hard coal and coke - Determination of volatile matter (ISO 562:1998, IDT)
- SS-ISO-589 - Hard coal -Determination of total moisture (ISO 589:2008, IDT)