Document Center is acquired by Nimonik

Document Center List of Standards on Explosives. Pyrotechnics And Fireworks

ICS Code 71.100.30

Return to ICS Index.

Up to Level 2:

• 71.100 (Products of the chemical industry Photographic chemicals, see 37.040.30 Raw materials for rubber and plastics, see 83.040 Paints and varnishes, see 87.040 Inks, see 87.080)

The following documents are a part of this series:

ASTM:

• ASTM-D5143 - Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023)
• ASTM-E2998 - Standard Practice for Characterization and Classification of Smokeless Powder
• ASTM-F2069 - Standard Practice for Evaluation of Explosives Vapor Detectors (Withdrawn 2009)

BSI:

• BS-5345-2 - Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture). Classification of hazardous areas
• BS-5607 - Code of practice for the safe use of explosives in the construction industry
• BS-5607-TC - Tracked Changes. Code of practice for the safe use of explosives in the construction industry
• BS-7114-1 - Fireworks. Classification of fireworks
• BS-7114-2 - Fireworks. Specification for fireworks
• BS-EN-13630-10 - Explosives for civil uses. Detonating cords and safety fuses
• BS-EN-13631-1 - Explosives for civil uses. High explosives
• BS-EN-13631-12 - Explosives for civil uses. High explosives
• BS-EN-13631-15 - Explosives for civil uses. High explosives
• BS-EN-13763-1 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-11 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-12 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-13 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-15 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-16 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-17 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-18 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-19 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-2 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-20 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-21 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-22 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-23 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-24 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-25 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-3 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-4 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-5 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-6 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-7 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-8 - Explosives for civil uses. Detonators and relays
• BS-EN-13763-9 - Explosives for civil uses. Detonators and relays
• BS-EN-13938-1 - Explosives for civil uses. Propellants and rocket propellants
• BS-EN-13938-2 - Explosives for civil uses. Propellants and rocket propellants
• BS-EN-13938-7 - Explosives for civil uses. Propellants and rocket propellants
• BS-EN-14035-1 - Fireworks. Terminology
• BS-EN-14035-15 - Fireworks. Fountains. Specification and test methods
• BS-EN-14035-19 - Fireworks. Hand-Held Sparklers. Specification and Test Methods
• BS-EN-14035-2 - Fireworks
• BS-EN-14035-22 - Fireworks. Mines. Specification and test methods
• BS-EN-14035-23 - Fireworks. Non-hand-held sparklers. Specification and test methods
• BS-EN-14035-24 - Fireworks. Novelty matches. Specification and test methods
• BS-EN-14035-25 - Fireworks. Party poppers. Specification and test methods
• BS-EN-14035-27 - Fireworks. Rockets. Specification and test methods
• BS-EN-14035-28 - Fireworks. Roman Candles. Specification and Test Methods
• BS-EN-14035-29 - Fireworks. Serpents. Specification and test methods
• BS-EN-14035-34 - Fireworks. Table bombs. Specification and test methods
• BS-EN-14035-35 - Fireworks. Throwdowns. Specification and test methods
• BS-EN-14035-36 - Fireworks. Wheels. Specification and test methods
• BS-EN-14035-38 - Fireworks. Shot tubes. Specification and test methods
• BS-EN-14035-5 - Fireworks. Batteries and combinations. Specification and test methods
• BS-EN-14035-6 - Fireworks. Bengal flames. Specification and test methods
• BS-EN-14035-7 - Fireworks. Bengal matches. Specification and test methods
• BS-EN-15947-1 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3
• BS-EN-15947-2 - Pyrotechnic articles. Fireworks, Categories F1, F2 and F3
• BS-EN-15947-3 - Pyrotechnic articles. Fireworks, Categories F1, F2, and F3
• BS-EN-15947-4 - Pyrotechnic articles. Fireworks, Categories F1, F2 and F3
• BS-EN-15947-5 - Pyrotechnic articles. Fireworks, Categories F1, F2 and F3
• BS-EN-15947-5-TC - Tracked Changes. Pyrotechnic articles. Fireworks, Categories F1, F2 and F3
• BS-EN-16256-1 - Pyrotechnic articles. Theatrical pyrotechnic articles
• BS-EN-16256-2 - Pyrotechnic articles. Theatrical pyrotechnic articles
• BS-EN-16256-3 - Pyrotechnic articles. Theatrical pyrotechnic articles
• BS-EN-16256-4 - Pyrotechnic articles. Theatrical pyrotechnic articles
• BS-EN-16256-5 - Pyrotechnic articles. Theatrical pyrotechnic articles
• BS-EN-16261-1 - Pyrotechnic articles. Fireworks, category 4
• BS-EN-16261-2 - Pyrotechnic articles. Fireworks, Category 4
• BS-EN-16261-3 - Pyrotechnic articles. Fireworks, Category 4
• BS-EN-16261-4 - Pyrotechnic articles. Fireworks, Category 4
• BS-EN-16263-1 - Pyrotechnic articles. Other pyrotechnic articles
• BS-EN-16263-2 - Pyrotechnic articles. Other pyrotechnic articles
• BS-EN-16263-3 - Pyrotechnic articles. Other pyrotechnic articles
• BS-EN-16263-4 - Pyrotechnic articles. Other pyrotechnic articles
• BS-EN-16263-5 - Pyrotechnic articles. Other pyrotechnic articles
• BS-EN-16265 - Pyrotechnic articles. Other pyrotechnic articles. Ignition devices
• BS-EN-16701 - Energetic materials for defence. Safety, vulnerability. Friability
• BS-ISO-22863-10 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-11 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-12 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-4 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-5 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-6 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-7 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-8 - Fireworks. Test methods for determination of specific chemical substances
• BS-ISO-22863-9 - Fireworks. Test methods for determination of specific chemical substances
• DD-14035 - Fireworks. Selection packs. Specification
• PD-CEN-15951 - Pyrotechnic articles. Fireworks, category 4. Overview of harmonized standards that will be developed by CEN/TC 212/WG 2
• PD-CEN-15952 - Pyrotechnic articles. Theatrical pyrotechnic articles, categories T1 and T2. Overview of harmonized standards that will be developed by CEN/TC 212/WG 3
• PD-CEN-15953 - Pyrotechnic articles. Other pyrotechnic articles, category P1 and P2. Overview of harmonized standards that will be developed by CEN/TC 212/WG 5
• PD-CEN-15970 - Pyrotechnic articles. Pyrotechnic articles for vehicles. Overview on work program for EN standards to be developed by CEN/TC 212 WG 4
• PD-EN-14035-10 - Fireworks, Double Bangers, Specification & Test Methods
• PD-EN-14035-12 - Fireworks, Flash Bangers & Flash Banger Batteries, Specification & Test Methods
• PD-EN-14035-13 - Fireworks
• PD-EN-14035-17 - Fireworks, Ground Spinners, Specification & Test Methods
• PD-EN-14035-18 - Fireworks, Hand-Held Fountains, Specification & Test Methods
• PD-EN-14035-20 - Fireworks
• PD-EN-14035-21 - Fireworks
• PD-EN-14035-3 - Fireworks
• PD-EN-14035-31 - Fireworks, Shell-In-Mortars, Specification & Test Methods
• PD-EN-14035-33 - Fireworks, Spinners, Specification & Test Methods
• PD-EN-14035-4 - Fireworks, Bangers & Banger Batteries, Specification & Test Methods
• PD-EN-14035-8 - Fireworks
• PD-EN-14035-9 - Fireworks, Crackling Granules, Specification & Test Methods

ISO:

• ISO-21583 - Firework displays - General guidance
• ISO-21865 - Fireworks - Third party testing - Voluntary scheme
• ISO-22863-1 - Fireworks - Test methods for determination of specific chemical substances - Part 1: General
• ISO-22863-10 - Fireworks - Test methods for determination of specific chemical substances - Part 10: Nitrogen content in nitrocellulose by iron(II) sulfate titration
• ISO-22863-11 - Fireworks - Test methods for determination of specific chemical substances - Part 11: Phosphorus content by inductively coupled plasma optical emission spectrometry (ICP-OES)
• ISO-22863-2 - Fireworks - Test methods for determination of specific chemical substances - Part 2: Hexachlorobenzene by gas chromatography
• ISO-22863-3 - Fireworks - Test methods for determination of specific chemical substances - Part 3: Lead and lead compounds by atomic absorption
• ISO-22863-4 - Fireworks - Test methods for determination of specific chemical substances - Part 4: Analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
• ISO-22863-5 - Fireworks - Test methods for determination of specific chemical substances - Part 5: Analysis of lead and lead compounds by inductively coupled plasma spectrometry (ICP)
• ISO-22863-6 - Fireworks - Test methods for determination of specific chemical substances - Part 6: Zirconium with a particle size of less than 40 µm by inductively coupled plasma optical emission spectrometry (ICP-OES)
• ISO-22863-7 - Fireworks - Test methods for determination of specific chemical substances - Part 7: Chlorates content by chemical titration analysis
• ISO-22863-8 - Fireworks - Test methods for determination of specific chemical substances - Part 8: Arsenic content by hydride generation atomic fluorescence spectrometry
• ISO-22863-9 - Fireworks - Test methods for determination of specific chemical substances - Part 9: Mercury content by hydride generation atomic fluorescence spectrometry
• ISO-25947-1 - Fireworks - Categories 1, 2 and 3 - Part 1: Terminology
• ISO-25947-2 - Fireworks - Categories 1, 2 and 3 - Part 2: Categories and types
• ISO-25947-3 - Fireworks - Categories 1, 2 and 3 - Part 3: Minimum labelling requirements
• ISO-25947-4 - Fireworks - Categories 1, 2 and 3 - Part 4: Test methods
• ISO-25947-5 - Fireworks - Categories 1, 2 and 3 - Part 5: Requirements for construction and performance
• ISO-26261-1 - Fireworks - Category 4 - Part 1: Terminology
• ISO-26261-2 - Fireworks - Category 4 - Part 2: Requirements
• ISO-26261-3 - Fireworks - Category 4 - Part 3: Test methods
• ISO-26261-4 - Fireworks - Category 4 - Part 4: Minimum labelling requirements and instructions for use

Other SDOs:

• DIN-EN-13630-10 - Part 10: Determination of Initiating Capability of Detonating Cords, Explosives for CI
• DIN-EN-13631-1 - Part 1: Requirements, Explosives for Civil Uses, High Explosives
• DIN-EN-13631-12 - Part 12: Specifications of Boosters With Different Initiating Capacity, Explosives For
• DIN-EN-13631-15 - Part 15: Calculation of Thermodynamic Properties, Explosives for Civil Uses, High Expl
• DIN-EN-13631-16 - Part 16: Detection & Measurement of Toxic Gases, Explosives for Civil Uses, High Expl
• DIN-EN-13631-3 - Part 3: Determination of Sensitiveness To Friction of Explosives, Explosives for Civil
• DIN-EN-13763-13 - Part 13: Determination of Resistance of Electric Detonatorsto Electrostatic Discharge
• DIN-EN-13763-15 - Part 15: Determination of Equivalent Initiating Capability, Explosives for Civil Uses
• DIN-EN-13763-26 - Part 26: Definitions, Methods & Requirements for Devices & Accessories for the Reliabl
• DIN-EN-13938-1 - Part 1: Requirements, Explosives for Civil Uses, Propellants & Rocket Propellants
• DIN-EN-13938-2 - Part 2: Determination of Resistance To Electrostatic Energy, Explosives for Civil Uses
• DIN-EN-13938-5 - Part 5: Determination of Voids & Fissures, Explosives for Civil Uses, Propellants & Ro
• DIN-EN-13938-7 - Part 7: Determination of Properties of Black Powder, Explosives for Civil Uses, Propel
• DIN-EN-14035-10 - Fireworks - Part 10: Double Bangers - Specification and test methods; German version EN 14035-10:2004
• DIN-EN-14035-12 - Fireworks - Part 12: Flash banger and flash banger batteries - Specification and test methods; German version EN 14035-12:2003, Corrigenda to DIN EN 14035-12:2003-09; German version EN 14035-12:2003/AC:2005
• DIN-EN-14035-13 - Fireworks - Part 13: Flash pellets - Specification and test methods; German version EN 14035-13:2004
• DIN-EN-14035-15 - Fireworks - Part 15: Fountains - Specification and test methods; German version EN 14035-15:2003, Corrigenda to DIN EN 14035-15:2003-09; German version EN 14035-15:2003/AC:2005
• DIN-EN-14035-17 - Fireworks - Part 17: Ground spinners - Specification and test methods; German version EN 14035-17:2004
• DIN-EN-14035-19 - Fireworks - Part 19: Hand-held sparklers - Specification and test methods; German version EN 14035-19:2003, Corrigenda to DIN EN 14035-19:2003-09; German version EN 14035-19:2003/AC:2006
• DIN-EN-14035-2 - Fireworks - Part 2: Classification; German version EN 14035-2:2003, Corrigenda to DIN EN 14035-2:2003-09; German version EN 14035-2:2003/AC:2005
• DIN-EN-14035-20 - Fireworks - Part 20: Jumping crackers - Specification and test methods; German version EN 14035-20:2005
• DIN-EN-14035-21 - Fireworks - Part 21: Jumping ground spinners - Specification and test methods; German version EN 14035-21:2005
• DIN-EN-14035-22 - Fireworks - Part 22: Mines - Specification and test methods; German version EN 14035-22:2004
• DIN-EN-14035-23 - Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods; German version EN 14035-23:2003, Corrigenda to DIN EN 14035-23:2003-09; German version EN 14035-23:2003/AC:2005
• DIN-EN-14035-24 - Fireworks - Part 24: Novelty matches - Specification and test methods; German version EN 14035-24:2004
• DIN-EN-14035-25 - Fireworks - Part 25: Party Poppers - Specification and test methods; German version EN 14035-25:2005
• DIN-EN-14035-27 - Fireworks - Part 27: Rockets - Specification and test methods; German version EN 14035-27:2003, Corrigenda to DIN EN 14035-27:2003-09; German version EN 14035-27:2003/AC:2005
• DIN-EN-14035-28 - Fireworks - Part 28: Roman candles - Specification and test methods; German version EN 14035-28:2004
• DIN-EN-14035-29 - Fireworks - Part 29: Serpents - Specification and test methods; German version EN 14035-29:2004
• DIN-EN-14035-3 - Fireworks - Part 3: Aerial wheels - Specification and test methods; German version EN 14035-3:2004
• DIN-EN-14035-31 - Fireworks - Part 31: Shell-in-mortars - Specification and test methods; German version EN 14035-31:2005
• DIN-EN-14035-33 - Fireworks - Part 33: Spinners - Specification and test methods; German version EN 14035-33:2005
• DIN-EN-14035-34 - Fireworks - Part 34: Table bombs - Specification and test methods: German version EN 14035-34:2003, Corrigenda to DIN EN 14035-34:2003-09; German version EN 14035-34:2003/AC:2005
• DIN-EN-14035-35 - Fireworks - Part 35: Throwdowns - Specification and test methods; German version EN 14035-35:2004
• DIN-EN-14035-36 - Fireworks - Part 36: Wheels - Specification and test methods; German version EN 14035-36:2004
• DIN-EN-14035-38 - Fireworks - Part 38: Shot tubes - Specification and test methods; German version EN 14035-38:2006
• DIN-EN-14035-4 - Fireworks - Part 4: Bangers and banger batteries - Specification and test methods; German version EN 14035-4:2003, Corrigenda to DIN EN 14035-4:2003-09; German version EN 14035-4:2003/AC:2005
• DIN-EN-14035-5 - Fireworks - Part 5: Batteries and combinations - Specification and test methods; German version EN 14035-5:2006
• DIN-EN-14035-6 - Fireworks - Part 6: Bengal flames - Specification and test methods; German version EN 14035-6:2004
• DIN-EN-14035-7 - Fireworks - Part 7: Bengal matches - Specification and test methods; German version EN 14035-7:2004
• DIN-EN-14035-8 - Fireworks - Part 8: Bengal sticks - Specification and test methods; German version EN 14035-8:2004
• DIN-EN-14035-9 - Fireworks - Part 9: Crackling granules - Specification and test methods; German version EN 14035-9:2004
• EN-13630-10 - Part 10: Determination of Initiating Capability of Detonating Cords, Explosives for CI
• EN-13631-1 - Part 1: Requirements, Explosives for Civil Uses, High Explosives
• EN-13631-12 - Part 12: Specifications of Boosters With Different Initiating Capacity, Explosives For
• EN-13631-15 - Part 15: Calculation of Thermodynamic Properties, Explosives for Civil Uses, High Expl
• EN-13631-16 - Part 16: Detection & Measurement of Toxic Gases, Explosives for Civil Uses, High Expl
• EN-13631-3 - Part 3: Determination of Sensitiveness To Friction of Explosives, Explosives for Civil
• EN-13763-15 - Part 15: Determination of Equivalent Initiating Capability, Explosives for Civil Uses
• EN-13763-26 - Part 26: Definitions, Methods & Requirements for Devices & Accessories for the Reliabl
• EN-13938-1 - Part 1: Requirements, Explosives for Civil Uses, Propellants & Rocket Propellants
• EN-13938-2 - Part 2: Determination of Resistance To Electrostatic Energy, Explosives for Civil Uses
• EN-13938-5 - Part 5: Determination of Voids & Fissures, Explosives for Civil Uses, Propellants & Ro
• EN-13938-7 - Part 7: Determination of Properties of Black Powder, Explosives for Civil Uses, Propel
• EN-14035-10 - Part 10: Double Bangers - Specification & Test Methods, Fireworks
• EN-14035-13 - Part 13: Flash Pellets - Specification & Test Methods, Fireworks
• EN-14035-17 - Part 17: Ground Spinners - Specification & Test Methods, Fireworks
• EN-14035-19 - Part 19: Hand-Held Sparklers - Specification & Test Methods, Fireworks
• EN-14035-20 - Part 20: Jumping Crackers - Specification & Test Methods, Fireworks
• EN-14035-22 - Part 22: Mines - Specification & Test Methods, Fireworks
• EN-14035-24 - Part 24: Novelty Matches - Specification & Test Methods, Fireworks
• EN-14035-25 - Part 25: Party Poppers - Specification & Test Methods, Fireworks
• EN-14035-28 - Part 28: Roman Candles - Specification & Test Methods, Fireworks
• EN-14035-29 - Part 29: Serpents - Specification & Test Methods, Fireworks
• EN-14035-3 - Part 3: Aerial Wheels - Specification & Test Methods, Fireworks
• EN-14035-31 - Part 31: Shell-In-Mortars - Specification & Test Methods, Fireworks
• EN-14035-33 - Part 33: Spinners - Specification & Test Methods, Fireworks
• EN-14035-35 - Part 35: Throwdowns - Specification & Test Methods, Fireworks
• EN-14035-36 - Part 36: Wheels - Specification & Test Methods, Fireworks
• EN-14035-38 - Part 38: Shot Tubes - Fireworks - Specification & Test Methods
• EN-14035-5 - Part 5: Batteries & Cominations - Specification & Test Methods, Fireworks
• EN-14035-6 - Part 6: Bengal Flames - Specification & Test Methods, Fireworks
• EN-14035-7 - Part 7: Bengal Matches - Specification & Test Methods
• EN-14035-8 - Part 8: Bengal Sticks - Specification & Test Methods
• EN-14035-9 - Part 9: Crackling Granules - Specification & Test Methods, Fireworks
• EN-15947-1 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 1: Terminology
• EN-15947-2 - Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 2: Categories and types of firework
• EN-15947-3 - Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 3: Minimum labelling requirements
• EN-15947-4 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
• EN-15947-5 - Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 5: Requirements for construction and performance
• EN-16256-1 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 1: Terminology
• EN-16256-2 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 2: Categories of theatrical pyrotechnic articles
• EN-16256-3 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 3: Requirements for construction and performance
• EN-16256-4 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 4: Minimum labelling requirements and instructions for use
• EN-16256-5 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods
• EN-16261-1 - Pyrotechnic articles - Fireworks, category 4 - Part 1: Terminology
• EN-16261-2 - Pyrotechnic articles - Fireworks, Category 4 - Part 2: Requirements
• EN-16261-3 - Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
• EN-16261-4 - Pyrotechnic articles - Fireworks, Category 4 - Part 4: Minimum labelling requirements and instructions for use
• EN-16263-1 - Pyrotechnic articles - Other pyrotechnic articles - Part 1: Terminology
• EN-16263-2 - Pyrotechnic articles - Other pyrotechnic articles - Part 2: Requirements
• EN-16263-3 - Pyrotechnic articles - Other pyrotechnic articles - Part 3: Categories and types
• EN-16263-4 - Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods
• EN-16263-5 - Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use
• EN-16264 - Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools
• EN-16265 - Pyrotechnic articles - Other pyrotechnic articles - Ignition devices
• EN-16701 - Energetic materials for defence - Safety, vulnerability - Friability
• SIS-CEN/TR-15951 - Pyrotechnic articles - Fireworks, category 4 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 2
• SIS-CEN/TR-15952 - Pyrotechnic articles - Theatrical pyrotechnic articles, categories T1 and T2 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 3
• SIS-CEN/TR-15953 - Pyrotechnic articles - Other pyrotechnic articles, category P1 and P2 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 5
• SIS-CEN/TR-15970 - Pyrotechnic articles for vehicles - Overview on work program for EN standards to be developed
• SIS-CEN/TS-13763-27 - Explosives for civil uses - Detonators and relays - Part 27: Definitions, methods and requirements for electronic initiation systems
• SS-EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
• SS-EN-12101-10 - Smoke and heat control systems - Part 10: Power supplies
• SS-EN-13229 - Inset appliances including open fires by solid fuels - Requirements and test methods
• SS-EN-13630-1 - Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements
• SS-EN-13630-10 - Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords
• SS-EN-13630-11 - Explosives for civil uses - Detonating cords and safety fuses - Part 11: Determination of velocity of detonation of detonating cords
• SS-EN-13630-12 - Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses
• SS-EN-13630-2 - Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses
• SS-EN-13630-3 - Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords
• SS-EN-13630-4 - Explosives for civil uses - Detonating cords and safety fuses - Part 4: Determination of sensitiveness to impact of detonating cords
• SS-EN-13630-5 - Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords
• SS-EN-13630-6 - Explosives for civil uses - Detonating cords and safety fuses - Part 6: Measurement of resistance to tension of detonating cords
• SS-EN-13630-7 - Explosives for civil uses - Detonating cords and safety fuses - Part 7: Determination of reliability of initiation of detonating cords
• SS-EN-13630-8 - Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses
• SS-EN-13630-9 - Explosives for civil uses - Detonating cords and safety fuses - Part 9: Determination of transmission of detonation from detonating cord to detonating cord
• SS-EN-13631-1 - Explosives for civil uses - High explosives - Part 1: Requirements
• SS-EN-13631-10 - Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation
• SS-EN-13631-11 - Explosives for civil uses - High explosives - Part 11: Determination of transmission of detonation
• SS-EN-13631-12 - Explosives for civil uses - High explosives - Part 12: Specifications of boosters with different initiating capability
• SS-EN-13631-13 - Explosives for civil uses - High explosives - Part 13: Determination of density
• SS-EN-13631-14 - Explosives for civil uses - High explosives - Part 14: Determination of velocity of detonation
• SS-EN-13631-15 - Explosives for civil uses - High explosives - Part 15: Calculation of thermodynamic properties
• SS-EN-13631-16 - Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
• SS-EN-13631-2 - Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives
• SS-EN-13631-3 - Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives
• SS-EN-13631-4 - Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives
• SS-EN-13631-5 - Explosives for civil uses - High explosives - Part 5: Determination of resistance to water
• SS-EN-13631-6 - Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure
• SS-EN-13631-7 - Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures
• SS-EN-13763-1 - Explosives for civil uses - Detonators and relays - Part 1: Requirements
• SS-EN-13763-11 - Explosives for civil uses - Detonators and relays - Part 11: Determination of resistance to damage by dropping of detonators and relays
• SS-EN-13763-12 - Explosives for civil uses - Detonators and relays - Part 12: Determination of resistance to hydrostatic pressure
• SS-EN-13763-13 - Explosives for civil uses - Detonators and relays - Part 13: Determination of resistance of electric detonators to electrostatic discharge
• SS-EN-13763-15 - Explosives for civil uses - Detonators and relays - Part 15: Determination of equivalent initiating capability
• SS-EN-13763-16 - Explosives for civil uses - Detonators and relays - Part 16: Determination of delay accuracy
• SS-EN-13763-17 - Explosives for civil uses - Detonators and relays - Part 17: Determination of no-fire current of electric detonators
• SS-EN-13763-18 - Explosives for civil uses - Detonators and relays - Part 18: Determination of series firing current of electric detonators
• SS-EN-13763-19 - Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse on electric detonators
• SS-EN-13763-2 - Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability
• SS-EN-13763-20 - Explosives for civil uses - Detonators and relays - Part 20: Determination of total electrical resistance of electric detonators
• SS-EN-13763-21 - Explosives for civil uses - Detonators and relays - Part 21: Determination of flash-over voltage of electric detonators
• SS-EN-13763-22 - Explosives for civil uses - Detonators and relays - Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires
• SS-EN-13763-23 - Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube
• SS-EN-13763-24 - Explosives for civil uses - Detonators and relays - Part 24: Determination of the electrical non-conductivity of shock tube
• SS-EN-13763-25 - Explosives for civil uses - Detonators and relays - Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories
• SS-EN-13763-26 - Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods, and requirements for devices and accessories for reliable and safe function of detonators and relays
• SS-EN-13763-3 - Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact
• SS-EN-13763-4 - Explosives for civil uses - Detonators and relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes
• SS-EN-13763-5 - Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes
• SS-EN-13763-6 - Explosives for civil uses - Detonators and relays - Part 6: Determination of resistance to cracking in low temperatures of leading wires
• SS-EN-13763-7 - Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
• SS-EN-13763-8 - Explosives for civil uses - Detonators and relays - Part 8: Determination of resistance to vibration of plain detonators
• SS-EN-13763-9 - Explosives for civil uses - Detonators and relays - Part 9: Determination of resistance to bending of detonators
• SS-EN-13857-1 - Explosives for civil uses - Part 1: Terminology
• SS-EN-13857-3 - Explosives for civil uses - Part 3: Information to be provided by the manufacturer or his authorised representative to the user
• SS-EN-13938-1 - Explosives for civil uses - Propellants and rocket propellants - Part 1: Requirements
• SS-EN-13938-2 - Explosives for civil uses - Propellants and rocket propellants - Part 2: Determination of resistance to electrostatic energy
• SS-EN-13938-3 - Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition
• SS-EN-13938-4 - Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions
• SS-EN-13938-5 - Explosives for civil uses - Propellants and rocket propellants - Part 5: Determination of voids and fissures
• SS-EN-13938-6 - Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings
• SS-EN-13938-7 - Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder
• SS-EN-14035-1 - Fireworks - Part 1: Terminology
• SS-EN-14035-10 - Fireworks - Part 10: Double Bangers - Specification and test methods
• SS-EN-14035-12 - Fireworks - Part 12: Flash bangers and flash banger batteries - Specification and test methods
• SS-EN-14035-13 - Fireworks - Part 13: Flash pellets - Specification and test methods
• SS-EN-14035-15 - Fireworks - Part 15: Fountains - Specification and test methods
• SS-EN-14035-17 - Fireworks - Part 17: Ground spinners - Specification and test methods
• SS-EN-14035-18 - Fireworks - Part 18: Hand-held fountains - Specification and test methods
• SS-EN-14035-19 - Fireworks - Part 19: Hand-held sparklers - Specification and test methods
• SS-EN-14035-2 - Fireworks - Part 2: Categorisation
• SS-EN-14035-20 - Fireworks - Part 20: Jumping crackers - Specification and test methods
• SS-EN-14035-21 - Fireworks - Part 21: Jumping ground spinners - Specification and test methods
• SS-EN-14035-22 - Fireworks - Part 22: Mines - Specification and test methods
• SS-EN-14035-23 - Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods
• SS-EN-14035-24 - Fireworks - Part 24: Novelty matches - Specification and test methods
• SS-EN-14035-25 - Fireworks - Part 25: Party-Poppers - Specification and test methods
• SS-EN-14035-27 - Fireworks - Part 27: Rockets - Specification and test methods
• SS-EN-14035-28 - Fireworks - Part 28: Roman candles - Specification and test methods
• SS-EN-14035-29 - Fireworks - Part 29: Serpents - Specification and test methods
• SS-EN-14035-3 - Fireworks - Part 3: Aerial wheels - Specification and test methods
• SS-EN-14035-31 - Fireworks - Part 31: Shell-in-mortars - Specification and test methods
• SS-EN-14035-33 - Fireworks - Part 33: Spinners - Specification and test methods
• SS-EN-14035-34 - Fireworks - Part 34: Table bombs - Specification and test methods
• SS-EN-14035-35 - Fireworks - Part 35: Throwdowns - Specification and test methods
• SS-EN-14035-36 - Fireworks - Part 36: Wheels - Specification and test methods
• SS-EN-14035-38 - Fireworks - Part 38: Shot tubes - Specification and test methods
• SS-EN-14035-4 - Fireworks - Part 4: Bangers and banger batteries - Specification and test methods
• SS-EN-14035-5 - Fireworks - Part 5: Batteries and combinations - Specification and test methods
• SS-EN-14035-6 - Fireworks - Part 6: Bengal flames - Specification and test methods
• SS-EN-14035-7 - Fireworks - Part 7: Bengal matches - Specification and test methods
• SS-EN-14035-8 - Fireworks - Part 8: Bengal sticks - Specification and test methods
• SS-EN-14035-9 - Fireworks - Part 9: Crackling granules - Specification and test methods
• SS-EN-15947-1 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 1: Terminology
• SS-EN-15947-2 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 2: Categories and types of firework
• SS-EN-15947-3 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 3: Minimum labelling requirements
• SS-EN-15947-4 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
• SS-EN-15947-5 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 5: Requirements for construction and performance
• SS-EN-16256-1 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 1: Terminology
• SS-EN-16256-2 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 2: Categories of theatrical pyrotechnic articles
• SS-EN-16256-3 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 3: Requirements for construction and performance
• SS-EN-16256-4 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 4: Minimum labelling requirements and instructions for use
• SS-EN-16256-5 - Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods
• SS-EN-16261-1 - Pyrotechnic articles - Fireworks, category 4 - Part 1: Terminology
• SS-EN-16261-2 - Pyrotechnic articles - Fireworks, Category 4 - Part 2: Requirements
• SS-EN-16261-3 - Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
• SS-EN-16261-4 - Pyrotechnic articles - Fireworks, Category 4 - Part 4: Minimum labelling requirements and instructions for use
• SS-EN-16263-1 - Pyrotechnic articles - Other pyrotechnic articles - Part 1: Terminology
• SS-EN-16263-2 - Pyrotechnic articles - Other pyrotechnic articles - Part 2: Requirements
• SS-EN-16263-3 - Pyrotechnic articles - Other pyrotechnic articles - Part 3: Categories and types
• SS-EN-16263-4 - Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods
• SS-EN-16263-5 - Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use
• SS-EN-16264 - Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools
• SS-EN-16265 - Pyrotechnic articles - Other pyrotechnic articles - Ignition devices
• SS-EN-16701 - Energetic materials for defence - Safety, vulnerability - Friability
• SS-EN-1783 - Matches - Performance requirements, safety and classification
• SS-EN-ISO-14451-1 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology (ISO 14451-1:2013)
• SS-EN-ISO-14451-10 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products (ISO 14451-10:2013)
• SS-EN-ISO-14451-2 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 2: Test methods (ISO 14451-2:2013)
• SS-EN-ISO-14451-3 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-3:2013)
• SS-EN-ISO-14451-4 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators (ISO 14451-4:2013)
• SS-EN-ISO-14451-5 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements and categorization for airbag gas generators (ISO 14451-5:2013)
• SS-EN-ISO-14451-6 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 6: Requirements and categorization for airbag modules (ISO 14451-6:2013)
• SS-EN-ISO-14451-7 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 7: Requirements and categorization for seatbelt pretensioners (ISO 14451-7:2013)
• SS-EN-ISO-14451-8 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters (ISO 14451-8:2013)
• SS-EN-ISO-14451-9 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 9: Requirements and categorization for actuators (ISO 14451-9:2013)
• SS-ISO-25947-1 - Fireworks - Categories 1, 2 and 3 - Part 1: Terminology (ISO 25947-1:2017, IDT)
• SS-ISO-25947-2 - Fireworks - Categories 1, 2 and 3 - Part 2: Categories and types (ISO 25947-2:2017, IDT)
• SS-ISO-25947-3 - Fireworks - Categories 1, 2 and 3 - Part 3: Minimum labelling requirements (ISO 25947-3:2017, IDT)
• SS-ISO-25947-4 - Fireworks - Categories 1, 2 and 3 - Part 4: Test methods (ISO 25947-4:2017, IDT)
• SS-ISO-25947-5 - Fireworks - Categories 1, 2 and 3 - Part 5: Requirements for construction and performance (ISO 25947-5:2017, IDT)
• SS-ISO-26261-1 - Fireworks - Category 4 - Part 1: Terminology (ISO 26261-1:2017, IDT)
• SS-ISO-26261-2 - Fireworks - Category 4 - Part 2: Requirements (ISO 26261-2:2017, IDT)
• SS-ISO-26261-3 - Fireworks - Category 4 - Part 3: Test methods (ISO 26261-3:2017, IDT)
• SS-ISO-26261-4 - Fireworks - Category 4 - Part 4: Minimum labelling requirements and instructions for use (ISO 26261-4:2017, IDT)
• UNE-EN-16263-1 - Pyrotechnics articles - Other pyrotechnic articles - Part 1: Terminology
• UNE-EN-16263-2 - Pyrotechnic articles - Other pyrotechnic articles - Part 2: Requirements
• UNE-EN-16263-4 - Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods
• UNE-EN-16263-5 - Pyrotechnics articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use