Document Center List of Standards on Alcohols. Ethers
ICS Code 71.080.60
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1007 - Standard Specification for
sec -Butyl Alcohol, - ASTM-D1133 - Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
- ASTM-D1152 - Standard Specification for Methanol (Methyl Alcohol)
- ASTM-D1257 - Standard Specification for High-Gravity Glycerin
- ASTM-D1258 - Standard Test Methods for High-Gravity Glycerin (Withdrawn 2011)
- ASTM-D1363 - Standard Test Method for Permanganate Time of Acetone and Methanol
- ASTM-D1719 - Standard Specification for Isobutyl Alcohol,
- ASTM-D1969 - Standard Specification for 2-Ethylhexanol
- ASTM-D2195 - Standard Test Methods for Pentaerythritol
- ASTM-D304 - Standard Specification for
n -Butyl Alcohol (Butanol) - ASTM-D3125 - Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid (Withdrawn 2021)
- ASTM-D3128 - Standard Specification for 2-Methoxyethanol
- ASTM-D319 - Standard Specification for Amyl Alcohol (Synthetic) (Withdrawn 2010)
- ASTM-D330 - Standard Specification for 2-Butoxyethanol
- ASTM-D331 - Standard Specification for 2-Ethoxyethanol,
- ASTM-D3362 - Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011)
- ASTM-D3541 - Standard Specification for 2-Ethylhexyl Acrylate
- ASTM-D3622 - Standard Specification for 1-Propanol (
n -Propyl Alcohol) - ASTM-D4252 - Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
- ASTM-D4590 - Standard Test Method for Colorimetric Determination of
p-tert -Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry - ASTM-D4668 - Test Method For Polyurethane Raw Materials: Determination Of Sodium And Potassium In Polyols (Withdrawn 1992)
- ASTM-D4773 - Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
- ASTM-D4794 - Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography
- ASTM-D4835 - Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
- ASTM-D4836 - Standard Specification for Dipropylene Glycol Monomethyl Ether
- ASTM-D4837 - Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021)
- ASTM-D5008 - Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
- ASTM-D5164 - Standard Specification for Propylene Glycol and Dipropylene Glycol
- ASTM-D5441 - Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
- ASTM-D7388 - Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
- ASTM-D7577 - Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
- ASTM-D7637 - Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
- ASTM-D7638 - Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
- ASTM-D7666 - Standard Specification for Triglyceride Burner Fuel
- ASTM-D770 - Standard Specification for Isopropyl Alcohol,
- ASTM-D7716 - Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
- ASTM-D7794 - Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
- ASTM-D7796 - Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
- ASTM-D7901 - Standard Specification for Dimethyl Ether for Fuel Purposes
- ASTM-E1075 - Standard Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol
- ASTM-E1100 - Test Method for Gas Chromatographic Analysis of Specially Denatured Ethanol, Formula SD-3A (Withdrawn 1998)
- ASTM-E1119 - Standard Specification for Industrial Grade Ethylene Glycol
- ASTM-E1147 - Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography (Withdrawn 2013)
- ASTM-E1177 - Standard Specification for Engine Coolant Grade Glycol
- ASTM-E202 - Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
- ASTM-E2470 - Standard Specification for Polyester Grade Ethylene Glycol
- ASTM-E2679 - Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by
Non-Aqueous Potentiometric Titration - ASTM-E346 - Standard Test Methods for Analysis of Methanol (Withdrawn 2017)
- ASTM-E611 - Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography (Withdrawn 2020)
- ASTM-E769 - Standard Test Methods for Odor of Methanol, Ethanol, n-Propanol, and Isopropanol
- ASTM-E852 - Test Methods for C4-C13 Plasticizer Grade Alcohols (Withdrawn 2000)
BSI:
- BS-1595-1 - Propan-2-ol (isopropyl alcohol) for industrial use
- BS-1595-2 - Propan-2-ol (isopropyl alcohol) for industrial use
- BS-1835 - Specification for 2-ethylhexan-1-ol for industrial use
- BS-2621-5 - Specifications for glycerol
- BS-2713 - Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)
- BS-506-1 - Methanol for industrial use.
- BS-506-2 - Methanol for industrial use
- BS-507 - Specification for ethanol for industrial use
- BS-508-1 - Butan-1-ol for industrial use
- BS-508-2 - Butan-1-ol for industrial use
- BS-549 - Specification for diacetone alcohol
- BS-5711-21 - Methods of sampling and test for glycerol
- BS-579 - Specification for diethyl ether (technical)
- BS-6392-5 - Testing of ethanol for industrial use
- BS-EN-15376 - Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
- BS-EN-15484 - Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method
- BS-EN-15485 - Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
- BS-EN-15486 - Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method
- BS-EN-15487 - Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method
- BS-EN-15488 - Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method
- BS-EN-15489 - Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method
- BS-EN-15490 - Ethanol as a blending component for petrol. Determination of pHe
- BS-EN-15491 - Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method
- BS-EN-15492 - Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
- BS-EN-15692 - Ethanol as a blending component for gasoline. Determination of water content. Karl Fischer potentiometric titration method
- BS-EN-15692-TC - Tracked Changes. Ethanol as a blending component for gasoline. Determination of water content. Karl Fischer potentiometric titration method
- BS-EN-15769 - Ethanol as a blending component of petrol. Determination of appearance. Visual method
- BS-EN-16136 - Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
- BS-EN-16136-TC - Tracked Changes. Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
- BS-ISO-16861 - Petroleum products. Fuels (class F). Specifications of dimethyl ether (DME)
- BS-ISO-17196 - Dimethyl ether (DME) for fuels. Determination of impurities. Gas chromatographic method
- BS-ISO-17197 - Dimethyl ether (DME) for fuels. Determination of water content. Karl Fischer titration method
- BS-ISO-17198 - Dimethyl ether (DME) for fuels. Determination of total sulfur, ultraviolet fluorescence method
- BS-ISO-17786 - Dimethyl ether (DME) for fuels. Determination of high temperature (105C) evaporation residues. Mass analysis method
- PD-CEN-15993 - Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
ISO:
- ISO-1387 - Methanol for industrial use -- Methods of test
- ISO-1388-1 - Ethanol for industrial use -- Methods of test -- Part 1 : General
- ISO-1388-10 - Ethanol for industrial use -- Methods of test -- Part 10 : Estimation of hydrocarbons content -- Distillation method
- ISO-1388-11 - Ethanol for industrial use -- Methods of test -- Part 11 : Test for detection of furfural
- ISO-1388-12 - Ethanol for industrial use -- Methods of test -- Part 12 : Determination of permanganate time
- ISO-1388-2 - Ethanol for industrial use -- Methods of test -- Part 2 : Detection of alkalinity or determination of acidity to phenolphthalein
- ISO-1388-3 - Ethanol for industrial use -- Methods of test -- Part 3 : Estimation of content of carbonyl compounds present in small amounts -- Photometric method
- ISO-1388-4 - Ethanol for industrial use -- Methods of test -- Part 4 : Estimation of content of carbonyl compounds present in moderate amounts -- Titrimetric method
- ISO-1388-5 - Ethanol for industrial use -- Methods of test -- Part 5 : Determination of aldehydes content -- Visual colorimetric method
- ISO-1388-6 - Ethanol for industrial use -- Methods of test -- Part 6 : Test for miscibility with water
- ISO-1388-7 - Ethanol for industrial use -- Methods of test -- Part 7 : Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)) -- Photometric method
- ISO-1388-8 - Ethanol for industrial use -- Methods of test -- Part 8 : Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)) -- Visual colorimetric method
- ISO-1388-9 - Ethanol for industrial use -- Methods of test -- Part 9 : Determination of esters content -- Titrimetric method after saponification
- ISO-16861 - Petroleum products - Fuels (class F) - Specifications of dimethyl ether (DME)
- ISO-17196 - Dimethyl ether (DME) for fuels - Determination of impurities - Gas chromatographic method
- ISO-17197 - Dimethyl ether (DME) for fuels - Determination of water content - Karl Fischer titration method
- ISO-17198 - Dimethyl ether (DME) for fuels - Determination of total sulfur, ultraviolet fluorescence method
- ISO-17786 - Dimethyl ether (DME) for fuels - Determination of high temperature (105°C) evaporation residues - Mass analysis method
- ISO-1843-1 - Higher alcohols for industrial use -- Methods of test -- Part 1: General
- ISO-1843-2 - Higher alcohols for industrial use -- Methods of test -- Part 2: Determination of acidity to phenolphthalein -- Titrimetric method
- ISO-1843-3 - Higher alcohols for industrial use -- Methods of test -- Part 3: Determination of carbonyl compounds content -- Potentiometric method
- ISO-1843-4 - Higher alcohols for industrial use -- Methods of test -- Part 4: Determination of bromine number -- Titrimetric method in the presence of mercury(II) chloride
- ISO-1843-5 - Higher alcohols for industrial use -- Methods of test -- Part 5: Determination of total alcohols content -- Titrimetric method
- ISO-1843-6 - Higher alcohols for industrial use -- Methods of test -- Part 6: Determination of ash
- ISO-1843-7 - Higher alcohols for industrial use -- Methods of test -- Part 7: Determination of distillation yield
- ISO-1843-8 - Higher alcohols for industrial use -- Methods of test -- Part 8: Sulphuric acid colour test
- ISO-2096 - Glycerols for industrial use -- Methods of sampling
- ISO-6796 - Polyglycols for industrial use -- Determination of hydroxyl number -- Phthalic anhydride esterification method
- ISO-756-1 - Propan-2-ol for industrial use -- Methods of test -- Part 1 : General
Other SDOs:
- EN-15376 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
- EN-15484 - Ethanol as a Blending Component for Petrol - Determination of Inorganic Chloride - Pot
- EN-15485 - Ethanol as a Blending Component for Petrol, Determination of Sulfur Content, Wavelengt
- EN-15486 - Ethanol as a Blending Component for Petrol, Determination of Sulfur Content, Ultraviol
- EN-15487 - Ethanol as a Blending Component for Petrol - Determination of Phosphorus Content - Alu
- EN-15488 - Ethanol as a Blending Component for Petrol, Determination of Copper Content, Graphite
- EN-15491 - Ethanol as a Blending Component for Petrol, Determination of Total Acidity, Colour Ind
- EN-15492 - Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
- EN-15692 - Ethanol as a Blending Component for Petrol, Determination of Water Content, Karl Fisch
- EN-15769 - Ethanol as a Blending Component of Petrol, Determination of Appearance, Visual Method
- EN-16136 - Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
- JIS-K-1522 - Isopropyl alcohol (Isopropanol)
- JIS-Z-7260-107 - Partition coefficient (1-octanol/water) -- Shake flask method
- SIS-CEN/TR-15993 - Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
- SS-EN-15293 - Automotive fuels - Automotive ethanol (E85) fuel - Requirements and test methods
- SS-EN-15376 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
- SS-EN-15484 - Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
- SS-EN-15485 - Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
- SS-EN-15486 - Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
- SS-EN-15487 - Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
- SS-EN-15488 - Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
- SS-EN-15489 - Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
- SS-EN-15490 - Ethanol as a blending component for petrol - Determination of pHe
- SS-EN-15491 - Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
- SS-EN-15492 - Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
- SS-EN-15692 - Ethanol as a blending component for gasoline - Determination of water content - Karl Fischer potentiometric titration method
- SS-EN-15721 - Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
- SS-EN-15769 - Ethanol as a blending component of petrol - Determination of appearance - Visual method
- SS-EN-15837 - Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
- SS-EN-16136 - Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
- SS-ISO-1388-1 - Ethanol for industrial use - Methods of test - Part 1: General
- SS-ISO-1388-12 - Ethanol for industrial use - Methods of test - Part 12: Determination of permanganate time
- SS-ISO-1388-2 - Ethanol for industrial use - Methods of test - Part 2: Detection of alkalinity or determination of acidity to phenolphthalein
- SS-ISO-1388-4 - Ethanol for industrial use - Methods of test - Part 4: Estimation of content of carbonyl compounds present in moderate amounts - Titrimetric method
- SS-ISO-1388-6 - Ethanol for industrial use - Methods of test - Part 6: Test for miscibility with water