Document Center List of Standards on Salts
ICS Code 71.060.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C750 - Standard Specification for Nuclear-Grade Boron Carbide Powder
- ASTM-C751 - Standard Specification for Nuclear-Grade Boron Carbide Pellets
- ASTM-C784 - Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
- ASTM-D1032 - Specification for Chromated Zinc Chloride
- ASTM-D1033 - Methods of Chemical Analysis of Chromated Zinc Chloride (Withdrawn 1992)
- ASTM-D1325 - Standard Specification for Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate (Withdrawn 2006)
- ASTM-D1326 - Standard Test Methods for Chemical Analysis of Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate (Withdrawn 2006)
- ASTM-D1411 - Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes (Withdrawn 2018)
- ASTM-D1627 - Standard Test Methods for Chemical Analysis of Acid Copper Chromate (Withdrawn 2006)
- ASTM-D1628 - Standard Test Methods for Chemical Analysis of Chromated Copper Arsenate (Withdrawn 2006)
- ASTM-D2076 - Standard Test Methods for Acid Value and Amine Value of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007)
- ASTM-D2077 - Standard Test Method for Ash in Fatty Quaternary Ammonium Chlorides (Withdrawn 2007)
- ASTM-D2078 - Standard Test Method for Iodine Value of Fatty Quaternary Ammonium Chlorides (Withdrawn 2003)
- ASTM-D2079 - Standard Test Method for Nonvolatile Matter (Solids) in Fatty Quaternary Ammonium Chlorides (Withdrawn 2007)
- ASTM-D2080 - Standard Test Method for Average Molecular Weight of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007)
- ASTM-D2081 - Standard Test Method for pH of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007)
- ASTM-D2284 - Standard Test Method for Acidity of Sulfur Hexafluoride
- ASTM-D2472 - Standard Specification for Sulfur Hexafluoride
- ASTM-D2674 - Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
- ASTM-D2685 - Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
- ASTM-D345 - Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications (Withdrawn 2019)
- ASTM-D3873 - Standard Test Method for Valency State of the Arsenic Component of Ammoniacal Copper Arsenate Solutions (Withdrawn 2006)
- ASTM-D4487 - Standard Test Methods for Analysis of Calcium Borosilicate
- ASTM-D5070 - Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations (Withdrawn 2023)
- ASTM-D5257 - Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
- ASTM-D632 - Standard Specification for Sodium Chloride
- ASTM-D7730 - Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-D928 - Standard Specification for Sodium Bicarbonate
- ASTM-D929 - Standard Specification for Borax (Withdrawn 2001)
- ASTM-D98 - Standard Specification for Calcium Chloride
- ASTM-E1099 - Standard Specification for Soda Ash, Anhydrous (Sodium Carbonate, Anhydrous) (Withdrawn 2001)
- ASTM-E1229 - Standard Specification for Calcium Hypochlorite
- ASTM-E1436 - Standard Practice for Handling Densified Articles of Silicon Nitride Reinforced with Silicon Carbide Whiskers (Withdrawn 1997)
- ASTM-E1437 - Standard Practice for Handling Silicon Carbide Whiskers (Withdrawn 2007)
- ASTM-E1506 - Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar) (Withdrawn 2016)
- ASTM-E359 - Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
- ASTM-E449 - Standard Test Methods for Analysis of Calcium Chloride
- ASTM-E534 - Standard Test Methods for Chemical Analysis of Sodium Chloride
- ASTM-E615 - Guide for Use and Development of Sodium Cyanide as a Predacide (Withdrawn 2000)
- ASTM-E752 - Practice for Safety and Health Requirements Relating to Occupational Exposure to Carbon Disulfide (Withdrawn 1995)
- ASTM-F1404 - Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique (Withdrawn 2016)
BSI:
- BS-1460 - Method for determination of apparent density after compaction of precipitated calcium carbonate
- BS-4267-0 - Ammonium nitrate
- BS-4267-1 - Ammonium nitrate
- BS-4267-10 - Ammonium nitrate
- BS-4267-11 - Ammonium nitrate
- BS-4267-2 - Ammonium nitrate
- BS-4267-4 - Ammonium nitrate
- BS-4267-6 - Ammonium nitrate
- BS-4267-7 - Ammonium nitrate
- BS-4267-8 - Ammonium nitrate
- BS-4267-9 - Ammonium nitrate
- BS-6463-2 - Quicklime, hydrated lime and natural calcium carbonate. Methods of chemical analysis
- BS-662-1 - Carbon disulphide for industrial use.
- BS-662-2 - Sampling & Methods of Test, Carbon Disulphide for Industrialuse
- BS-662-3 - Carbon disulphide for industrial use
- BS-7319-10 - Analysis of sodium chloride for industrial use
- BS-7319-6 - Analysis of sodium chloride for industrial use
- BS-7319-7 - Analysis of sodium chloride for industrial use
- BS-7319-8 - Analysis of sodium chloride for industrial use
- BS-7319-9 - Analysis of sodium chloride for industrial use
- BS-ISO-20292 - Materials for the production of primary aluminium. Dense refractory bricks. Determination of cryolite resistance
- PD-ISO-4277 - Cryolite, natural and artificial. Conventional test for evaluation of free fluorides content
ISO:
- ISO-1619 - Cryolite, natural and artificial -- Preparation and storage of test samples
- ISO-1620 - Cryolite, natural and artificial -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
- ISO-1686 - Sodium and potassium silicates for industrial use -- Samples and methods of test -- General
- ISO-1689 - Sodium and potassium silicates for industrial use -- Calculation of the ratio : silicon dioxide/sodium oxide or silicon dioxide/potassium oxide
- ISO-1690 - Sodium and potassium silicates for industrial use -- Determination of silica content -- Gravimetric method by insolubilization
- ISO-1691 - Sodium and potassium silicates for industrial use -- Determination of carbonates content -- Gas-volumetric method
- ISO-1692 - Sodium and potassium silicates for industrial use -- Determination of total alkalinity -- Titrimetric method
- ISO-1693 - Cryolite, natural and artificial -- Determination of fluorine content -- Modified Willard-Winter method
- ISO-1694 - Cryolite, natural and artificial -- Determination of iron content -- 1,10- Phenanthroline photometric method
- ISO-20292 - Materials for the production of primary aluminium - Dense refractory bricks - Determination of cryolite resistance
- ISO-2122 - Sodium and potassium silicates for industrial use -- Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water
- ISO-2197 - Sodium hydrogen carbonate for industrial use -- List of methods of test and preparation of the test sample
- ISO-2199 - Sodium hydrogen carbonate for industrial use -- Determination of sodium hydrogen carbonate content -- Titrimetric method
- ISO-2216 - Crude Sodium Borates for Industrial Use - Determination of Sodium Oxide and Boric Oxide Cont
- ISO-2217 - Crude Sodium Borates for Industrial Use - Determination of Matter Insoluble in Alkaline Me
- ISO-2218 - Crude Sodium Borates for Industrial Use - Determination of Loss in Mass After Heating at 9
- ISO-2366 - Cryolite, natural and artificial -- Determination of sodium content -- Flame emission and atomic absorption spectrophotometric methods
- ISO-2367 - Cryolite (natural and artificial) -- Determination of aluminium content -- 8- Hydroxyquinoline gravimetric method
- ISO-2460 - Sodium hydrogen carbonate for industrial use -- Determination of iron content -- 1,10- Phenanthroline photometric method
- ISO-2461 - Sodium chlorate for industrial use -- Determination of matter insoluble in water
- ISO-2462 - Sodium chlorate for industrial use -- Determination of moisture content -- Gravimetric method
- ISO-2463 - Sodium chlorate for industrial use -- Determination of chloride content -- Mercurimetric method
- ISO-2479 - Sodium chloride for industrial use -- Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
- ISO-2480 - Sodium chloride for industrial use -- Determination of sulphate content -- Barium sulphate gravimetric method
- ISO-2481 - Sodium chloride for industrial use -- Determination of halogens, expressed as chlorine -- Mercurimetric method
- ISO-2482 - Sodium chloride for industrial use -- Determination of calcium and magnesium contents -- EDTA complexometric methods
- ISO-2483 - Sodium chloride for industrial use -- Determination of the loss of mass at 110 degrees C
- ISO-2830 - Cryolite, natural and artificial -- Determination of aluminium content -- Atomic absorption method
- ISO-2831 - Sodium fluoride for industrial use -- Determination of water-insoluble matter
- ISO-2832 - Sodium fluoride for industrial use -- Determination of moisture content
- ISO-2833 - Sodium fluoride for industrial use -- Determination of fluorine content -- Modified Willard-Winter method
- ISO-2992 - Ammonium sulphate for industrial use -- Determination of iron content -- 2,2- Bipyridyl photometric method'
- ISO-2993 - Ammonium sulphate for industrial use -- Determination of free acidity -- Titrimetric method
- ISO-3199 - Sodium chlorate for industrial use -- Determination of chlorate content -- Dichromate titrimetric method
- ISO-3332 - Ammonium sulphate for industrial use -- Determination of ammoniacal nitrogen content -- Titrimetric method after distillation
- ISO-3357 - Sodium tripolyphosphate and sodium pyrophosphate for industrial use -- Determination of total phosphorus(V) oxide content -- Quinoline phosphomolybdate gravimetric method
- ISO-3360 - Phosphoric acid and sodium phosphates for industrial use (including foodstuffs) -- Determination of fluorine content -- Alizarin complexone and lanthanum nitrate photometric method
- ISO-3391 - Cryolite, natural and artificial -- Determination of calcium content -- Flame atomic absorption method
- ISO-3393 - Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of moisture content -- Gravimetric method
- ISO-3428 - Sodium fluoride for industrial use -- Preparation and storage of test samples
- ISO-4277 - Cryolite, natural and artificial - Conventional test for evaluation of free fluorides content
- ISO-4280 - Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of sulphate content -- Barium sulphate gravimetric method
- ISO-4281 - Sodium hexafluorosilicate for industrial use -- Determination of free acidity and total hexafluorosilicate content -- Titrimetric method
- ISO-5373 - Condensed phosphates for industrial use (including foodstuffs) -- Determination of calcium content -- Flame atomic absorption spectrometric method
- ISO-5440 - Sodium hexafluorosilicate for industrial use -- Determination of phosphate content -- Molybdovanadate spectrophotometric method
- ISO-5444 - Sodium fluorosilicate for industrial use -- Determination of loss in mass at 105 degrees C
- ISO-5930 - Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of phosphorus content -- Reduced molybdophosphate photometric method
- ISO-5938 - Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of sulphur content -- X-ray fluorescence spectrometric method
- ISO-6374 - Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of phosphorus content -- Atomic absorption spectrometric method after extraction
- ISO-739 - Sodium carbonate for industrial use -- Preparation and storage of test samples
- ISO-740 - Sodium carbonate for industrial use -- Determination of total soluble alkalinity -- Titrimetric method
- ISO-746 - Sodium carbonate for industrial use -- Determination of matter insoluble in water at 50 degrees C
Other SDOs:
- JIS-K-1450 - Aluminium sulfate for water works
- JIS-K-1475 - Poly aluminium chloride for water works
- SS-ISO-1619 - Cryolite, natural and artificial - Preparation and storage of test samples
- SS-ISO-1620 - Cryolite, natural and artificial - Determination of silica content - Reduced molybdosilicate spectrophotometric method
- SS-ISO-1689 - Sodium and potassium silicates for industrial use- Calculation of the ratio Si02/Na20 or Si02/K20
- SS-ISO-1691 - Sodium and potassium silicates for industrial use- Determination of carbonates content - Gas-volumetric method
- SS-ISO-1694 - Cryolite, natural and artificial - Determination of iron content - 1,10-Phenanthroline photometric method
- SS-ISO-1917 - Hydrated sodium perborates for industrial use - Determination of sodium oxide, boric oxide and available oxygen contents - Volumetric methods
- SS-ISO-2366 - Cryolite, natural and artificial - Determination of sodium content - Flame emission and atomic absorption spectrophotometric method
- SS-ISO-2830 - Cryolite, natural and artificial - Determination of aluminium content - Atomic absorption method
- SS-ISO-3123 - Sodium perborates for industrial use - Determination of rate of solution - Conductivity method
- SS-ISO-3391 - Cryolite, natural and artificial - Determination of calcium content - Flame atomic absorption method
- SS-ISO-3393 - Cryolite, natural and artificial, and aluminium fluoride for industrial use - Determination of moisture content - Gravimetric method
- SS-ISO-5937 - Sodium perborates for industrial use - Determination of degree of attrition
- SS-ISO-5938 - Cryolite, natural and artificial, and aluminium fluoride for industrial use - Determination of sulphur content - X-ray fluorescence spectrometric method