Document Center List of Standards on Irrigation And Drainage Equipment
ICS Code 65.060.35
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D5093 - Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring (Withdrawn 2024)
- ASTM-D8152 - Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
- ASTM-F1176 - Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi (Withdrawn 2010)
- ASTM-F1815 - Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
- ASTM-F2648 - Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
BSI:
- BS-1196 - Specification for clayware field drain pipes and junctions
- BS-3746 - Specification for PVC garden hose
- BS-7459-2 - Rotating sprinklers for irrigation equipment.
- BS-7562-3 - Planning, design and installation of irrigation schemes
- BS-8588 - Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm
- BS-EN-12324-2 - Irrigation techniques. Reel machine systems
- BS-EN-12324-3 - Irrigation techniques. Reel machine systems
- BS-EN-12324-4 - Irrigation techniques. Reel machine systems
- BS-EN-12325-2 - Irrigation techniques. Centre pivot and moving lateral systems
- BS-EN-12325-3 - Irrigation techniques. Centre pivot and moving lateral systems
- BS-EN-12484-2 - Irrigation techniques. Automatic turf irrigation systems
- BS-EN-12484-3 - Irrigation techniques. Automatic turf irrigation systems
- BS-EN-12484-4 - Irrigation techniques. Automatic turf irrigation systems
- BS-EN-12484-5 - Irrigation techniques. Automatic turf irrigation systems
- BS-EN-12734 - Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing
- BS-EN-13635 - Irrigation techniques. Localised irrigation systems. Terminology and data to be supplied by the manufacturer
- BS-EN-13742-1 - Irrigation techniques. Solid set sprinkler systems
- BS-EN-13742-2 - Irrigation techniques. Solid set sprinkler systems
- BS-EN-14049 - Water application intensity. Calculation principles and measurement methods
- BS-EN-14267 - Irrigation techniques. Irrigation hydrants
- BS-EN-14268 - Irrigation techniques. Meters for irrigation water
- BS-EN-15097 - Irrigation techniques. Localised irrigation. Hydraulic evaluation
- BS-EN-15099-1 - Irrigation techniques. Remote monitoring and control for irrigation systems
- BS-EN-908 - Agricultural and forestry machinery. Reel machines for irrigation. Safety
- BS-EN-909 - Agricultural and forestry machinery. Centre pivot and moving lateral types irrigation machines. Safety
- BS-EN-ISO-11545 - Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of water distribution
- BS-EN-ISO-13693-1 - Irrigation equipment. Safety devices for chemigation. Small plastics valves for chemigation
- BS-EN-ISO-8224-1 - Traveller irrigation machines
- BS-EN-ISO-9261 - Agricultural irrigation equipment. Emitters and emitting pipe. Specification and test methods
- BS-ISO-11738 - Agricultural irrigation equipment. Control heads
- BS-ISO-13457 - Agricultural irrigation equipment. Water-driven chemical injector pumps
- BS-ISO-13457-TC - Tracked Changes. Agricultural irrigation equipment. Water-driven chemical injector pumps
- BS-ISO-13460-1 - Agricultural irrigation equipment. Plastics saddles
- BS-ISO-13693-1 - Irrigation equipment. Safety devices for chemigation. Small plastics valves for chemigation
- BS-ISO-13693-2 - Irrigation equipment. Safety devices for chemigation
- BS-ISO-15081 - Agricultural equipment. Graphical symbols for pressurized irrigation systems
- BS-ISO-15886-1 - Agricultural irrigation equipment. Sprinklers
- BS-ISO-15886-2 - Agricultural irrigation equipment. Sprinklers
- BS-ISO-15886-3 - Agricultural irrigation equipment. Sprinklers
- BS-ISO-15886-4 - Irrigation equipment. Irrigation sprinklers
- BS-ISO-16438 - Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods
- BS-ISO-16438-TC - Tracked Changes. Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods
- BS-ISO-18471 - Agricultural irrigation equipment. Filters. Verification of filtration grade
- BS-ISO-21622-2 - Irrigation techniques. Remote monitoring and control for irrigation
- BS-ISO-21622-3 - Irrigation techniques. Remote monitoring and control for irrigation
- BS-ISO-24120-1 - Agricultural irrigation equipment. Guideline on the implementation of pressurized irrigation systems
- BS-ISO-24120-2 - Agricultural irrigation equipment. Guideline on the implementation of pressurized irrigation systems
- BS-ISO-24649 - Agricultural irrigation equipment. Manually and hydraulically operated plastics valves
- BS-ISO-7714 - Agricultural irrigation equipment. Volumetric valves. General requirements and test methods
- BS-ISO-8026 - Agricultural irrigation equipment. Sprayers. General requirements and test methods
- BS-ISO-8779 - Plastics piping systems. Polyethylene (PE) pipes for irrigation. Specifications
- BS-ISO-9261 - Agricurltural irrigation equipment. Emitters and emitting pipe. Specification and test methods
- BS-ISO-9635-1 - Agricultural irrigation equipment. Irrigation valves
- BS-ISO-9635-2 - Agricultural irrigation equipment. Irrigation valves
- BS-ISO-9635-3 - Agricultural irrigation equipment. Irrigation valves
- BS-ISO-9635-4 - Agricultural irrigation equipment. Irrigation valves
- BS-ISO-9635-5 - Agricultural irrigation equipment. Irrigation valves
- BS-ISO-9644 - Agricultural irrigation equipment. Pressure losses in irrigation valves. Test method
- BS-ISO-9911 - Agricultural irrigation equipment. Manually operated small plastics valves
- BS-ISO-9912-1 - Agricultural irrigation equipment. Filters for micro-irrigation
- BS-ISO-9912-2 - Agricultural irrigation equipment. Filters for microirrigation
- BS-ISO-9912-4 - Agricultural irrigation equipment. Filters for microirrigation
- PD-ISO-15155 - Test facilities for agricultural irrigation equipment
- PD-ISO-15155-1 - Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment
- PD-ISO-15155-2 - Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment
ISO:
- ISO-10522 - Agricultural irrigation equipment - Direct-acting pressure-regulating valves
- ISO-11419 - Agricultural irrigation equipment - Float type air release valves
- ISO-11545 - Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution
- ISO-11678 - Agricultural irrigation equipment - Aluminium irrigation tubes
- ISO-11738 - Agricultural irrigation equipment - Control heads
- ISO-12374 - Agricultural irrigation - Wiring and equipment for electrically driven or controlled irrigation machines
- ISO-13457 - Agricultural irrigation equipment - Water-driven chemical injector pumps
- ISO-13460 - Agricultural irrigation equipment - Plastics saddles for polyethylene pressure pipes
- ISO-13460-1 - Agricultural irrigation equipment - Plastics saddles - Part 1: Polyethylene pressure pipes
- ISO-13693-1 - Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation
- ISO-13693-2 - Irrigation equipment - Safety devices for chemigation - Part 2: Chemigation valve assemblies from DN 75 (3) to DN 350 (14)
- ISO-15081 - Agricultural equipment - Graphical symbols for pressurized irrigation systems
- ISO-15155 - Test facilities for agricultural irrigation equipment
- ISO-15155-1 - Agricultural irrigation equipment - Test facilities for agricultural irrigation equipment - Part 1: General
- ISO-15155-2 - Agricultural irrigation equipment - Test facilities for agricultural irrigation equipment - Part 2: Test facility operating manual
- ISO-15873 - Irrigation equipment -- Differential pressure Venturi-type liquid additive injectors
- ISO-15886-1 - Agricultural irrigation equipment - Sprinklers - Part 1: Definition of terms and classification
- ISO-15886-2 - Agricultural irrigation equipment - Sprinklers - Part 2: Design and operation requirements
- ISO-15886-3 - Agricultural irrigation equipment - Sprinklers - Part 3: Characterization of distribution and test methods
- ISO-15886-3-AM1 - - Amendment 1
- ISO-15886-4 - Irrigation equipment - Irrigation sprinklers - Part 4: Test methods for durability
- ISO-16149 - Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods
- ISO-16399 - Agricultural irrigation equipment - Meters for irrigation water
- ISO-16438 - Agricultural irrigation equipment - Thermoplastic collapsible hoses for irrigation - Specifications and test methods
- ISO-18471 - Agricultural irrigation equipment - Filters - Verification of filtration grade
- ISO-20419 - Treated wastewater reuse for irrigation - Guidelines for the adaptation of irrigation systems and practices to treated wastewater
- ISO-21622-2 - Irrigation techniques - Remote monitoring and control for irrigation - Part 2: Tests
- ISO-21622-3 - Irrigation techniques - Remote monitoring and control for irrigation - Part 3: Interoperability
- ISO-24120-1 - Agricultural irrigation equipment - Guideline on the implementation of pressurized irrigation systems - Part 1: General principles of irrigation
- ISO-24120-2 - Agricultural irrigation equipment - Guideline on the implementation of pressurized irrigation systems - Part 2: Drip irrigation
- ISO-24649 - Agricultural irrigation equipment - Manually and hydraulically operated plastics valves
- ISO-24649-AM1 - - Amendment 1: Agricultural irrigation equipment - Manually and hydraulically operated plastics valves - Amendment 1
- ISO-7714 - Agricultural irrigation equipment - Volumetric valves - General requirements and test methods
- ISO-7749-1 - Agricultural irrigation equipment - Rotating sprinklers - Part 1: Design and operational requirements
- ISO-8026 - Agricultural irrigation equipment - Sprayers - General requirements and test methods
- ISO-8026-1 - AMENDMENT 1
- ISO-8059 - Irrigation equipment - Automatic irrigation systems - Hydraulic control
- ISO-8224-1 - Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods
- ISO-8224-1-AM1 - Traveller irrigation machines - Part 1: Laboratory and field test methods - Amendment 1
- ISO-8224-2 - Traveller irrigation machines - Part 2: Softwall hose and couplings - Test methods
- ISO-8779 - Plastics piping systems - Polyethylene (PE) pipes for irrigation - Specifications
- ISO-8779-AM1 - - Amendment 1
- ISO-8796 - Polyethylene PE 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking induced by insert-type fittings - Test method and requirements
- ISO-9261 - Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods
- ISO-9625 - Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
- ISO-9635 - Irrigation equipment - Hydraulically operated irrigation valves
- ISO-9635-1 - Agricultural irrigation equipment - Irrigation valves - Part 1: General requirements
- ISO-9635-2 - Agricultural irrigation equipment - Irrigation valves - Part 2: Isolating valves
- ISO-9635-3 - Agricultural irrigation equipment - Irrigation valves - Part 3: Check valves
- ISO-9635-4 - Agricultural irrigation equipment - Irrigation valves - Part 4: Air valves
- ISO-9635-5 - Agricultural irrigation equipment - Irrigation valves - Part 5: Control valves
- ISO-9644 - Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method
- ISO-9911 - Agricultural irrigation equipment - Manually operated small plastics valves
- ISO-9912-1 - Agricultural irrigation equipment - Filters for micro-irrigation - Part 1: Terms, definitions and classification
- ISO-9912-2 - Agricultural irrigation equipment - Filters for microirrigation - Part 2: Strainer-type filters and disc filters
- ISO-9912-3 - Agricultural irrigation equipment - Filters for microirrigation - Part 3: Automatic flushing strainer-type filters and disc filters
- ISO-9912-4 - Agricultural irrigation equipment - Filters for microirrigation - Part 4: Granulated media filters
- ISO-9952 - Agricultural irrigation equipment- Check valves
Other SDOs:
- DIN-EN-13742-1 - Part 1: Selection, Design, Planning & Installation, Irrigation Techniques, Solid Set S
- DIN-EN-13742-2 - Part 2: Test Methods, Irrigation Techniques, Solid Set Sprinkler Systems
- DIN-EN-14049 - Irrigation Techniques - Water Application Intensity - Calcullation Principles & Measur
- DIN-EN-14267 - Irrigation Techniques, Irrigation Hydrants
- DIN-EN-14268 - Irrigation Techniques, Meters for Irrigation Water
- DIN-EN-15097 - Irrigation Techniques - Localised Irrigation - Hydraulic Evaluation
- DIN-EN-ISO-8224-1 - Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods
- EN-12324-2 - Part 2: Specifications of Polyethylene Tubes for Reel Machines, Irrigation Techniques
- EN-12324-3 - Part 3: Presentation of Technical Characteristics, Irrigation Techniques - Reel Machin
- EN-12324-4 - Part 4: Check List of Users Requirements, Irrigation Techniques - Reel Machine System
- EN-12325-2 - Part 2: Minimum Performances & Technical Characteristics, Irrigation Techniques - Cent
- EN-12325-3 - Irrigation Techniques - Centre Pivot & Moving Lateral Systems Part 3: Terminology & Cl
- EN-12484-5 - Part 5: Testing Methods of Systems, Irrigation Techniques, Automatic Turf Irrigation S
- EN-13742-1 - Part 1: Selection, Design, Planning & Installation, Irrigation Techniques, Solid Set S
- EN-13742-2 - Part 2: Test Methods, Irrigation Techniques, Solid Set Sprinkler Systems
- EN-14049 - Irrigation Techniques - Water Application Intensity Calculation Principles & Measureme
- EN-14267 - Irrigation Techniques, Irrigation Hydrants
- EN-14268 - Irrigation Techniques, Meters for Irrigation Water
- EN-15097 - Irrigation Techniques - Localised Irrigation - Hydraulic Evaluation
- EN-15099-1 - Part 1: General Considerations, Irrigation Techniques - Remote Monitoring & Control Fo
- EN-908 - Agricultural & Forestry Machinery - Reel Machines for Irrigation - Safety
- EN-ISO-11545 - Agricultural Irrigation Equipment - Centre-Pivot & Moving Lateral Irrigation Machines
- EN-ISO-13693-1 - Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation
- EN-ISO-8224-1 - Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods
- EN-ISO-9261 - Agricultural Irrigation Equipment, Emitters & Emitting Pipe, Specification & Test Meth
- IWA-20 - Understanding and applying drip irrigation for sustainable agriculture
- SS-EN-12324-1 - Irrigation techniques - Reel machine systems - Part 1: Size series
- SS-EN-12324-2 - Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
- SS-EN-12324-3 - Irrigation techniques - Reel machine systems - Part 3: Presentation of technical characteristics
- SS-EN-12324-4 - Irrigation techniques - Reel machine systems - Part 4: Check list of users requirements
- SS-EN-12325-1 - Irrigation techniques - Centre pivot and moving laterial systems - Part 1: Presentation of the technical characteristics
- SS-EN-12325-2 - Irrigation techniques - Centre pivot and moving lateral systems - Part 2: Minimum performances and technical characteristics
- SS-EN-12325-3 - Irrigation techniques - Centre pivot and moving lateral systems - Part 3: Terminology and classification
- SS-EN-12484-1 - Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment of the owner
- SS-EN-12484-2 - Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates
- SS-EN-12484-3 - Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management
- SS-EN-12484-4 - Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and Acceptance
- SS-EN-12484-5 - Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems
- SS-EN-12734 - Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing
- SS-EN-13635 - Irrigation techniques - Localised irrigation systems - Terminology and data to be supplied by the manufacturer
- SS-EN-13742-1 - Irrigation techniques - Solid set sprinkler systems - Part 1: Selection, design, planning and installation
- SS-EN-13742-2 - Irrigation techniques - Solid set sprinkler systems - Part 2: Test methods
- SS-EN-13997 - Irrigation techniques - Connection and control accessories for use in irrigation systems - Technical characteristics and testing
- SS-EN-14049 - Irrigation techniques - Water application intensity - Calculation principles and measurement methods
- SS-EN-14049-AM1 - Irrigation techniques - Water application intensity - Calculation principles and measurement methods
- SS-EN-14267 - Irrigation techniques - Irrigation hydrants
- SS-EN-14268 - Irrigation techniques - Meters for irrigation water
- SS-EN-15097 - Irrigation techniques - Localised irrigation - Hydraulic evaluation
- SS-EN-15099-1 - Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1: General considerations
- SS-EN-908 - Agricultural and forestry machinery - Reel machines for irrigation - Safety
- SS-EN-909 - Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety
- SS-EN-ISO-11545 - Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2009)
- SS-EN-ISO-13693-1 - Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation (ISO 13693-1:2013)
- SS-EN-ISO-8224-1 - Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods (ISO 8224-1:2003)
- SS-EN-ISO-8224-1-AM1 - Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods - Amendment 1 (ISO 8224-1:2003/Amd 1:2011)
- SS-EN-ISO-9261 - Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (ISO 9261:2004)
- SS-ISO-11738 - Agricultural irrigation equipment - Control heads
- SS-ISO-15873 - Irrigation equipment - Differential pressure Venturi-type liquid additive injectors
- SS-ISO-8026 - Irrigation equipment - Irrigation sprayers - General requirements and test methods
- SS-ISO-8026-AM1 - Agricultural irrigation equipment - Sprayers - General requirements and test methods - Amendment 1
- SS-ISO-8224-2 - Traveller irrigation machines - Part 2: Softwall hose and couplings Test methods
- SS-ISO-8779 - Plastics piping systems - Polyethylene (PE) pipes for irrigation - Specifications (ISO 8779:2010, IDT)
- SS-ISO-8779-AM1 - Plastics piping systems - Polyethylene (PE) pipes for irrigation - Specifications - Amendment 1 (ISO 8779:2010/Amd 1:2014, IDT)
- SS-ISO-8796 - Polyethylene (PE) 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking induced by insert-type fittings - Test method and requirements (ISO 8796:2004, IDT)
- SS-ISO-9261 - Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (ISO 9261:2004, IDT)
- UNE-ISO-16399 - Meters for irrigation water