Document Center List of Standards on Textile Glass Materials
ICS Code 59.100.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1459 - Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation (Withdrawn 2009)
- ASTM-D2343 - Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
- ASTM-D2518 - Standard Specification for Woven Glass Fabrics for Electrical Insulation (Withdrawn 2013)
- ASTM-D3656 - Standard Specification for Insect Screening and Louver Cloth Woven from
Vinyl-Coated Glass Yarns - ASTM-D4029 - Standard Specification for Finished Woven Glass Fabrics
- ASTM-D4030 - Standard Specification for Glass Fiber Cord and Sewing Thread
- ASTM-D4389 - Standard Specification for Finished Glass Fabrics Woven From Rovings
- ASTM-D4909 - Test Method For Color Stability Of Vinyl-Coated Glass Textiles To Accelerated Weathering (Withdrawn 1996)
- ASTM-D4963 - Standard Test Method for Ignition Loss of Glass Strands and Fabrics (Withdrawn 2020)
- ASTM-D578 - Standard Specification for Glass Fiber Strands
- ASTM-D580 - Standard Specification for Greige Woven Glass Tapes and Webbings
- ASTM-D581 - Standard Specification for Glass Fiber Greige Braided Tubular Sleeving (Withdrawn 2021)
- ASTM-D7018 - Standard Terminology Relating to Glass Fiber and Its Products (Withdrawn 2021)
- ASTM-E2098 - Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
- ASTM-E2478 - Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
BSI:
- BS-2782-7-M-721A - Methods of testing plastics. Rheological properties
- BS-3396-1 - Woven glass fibre fabrics for plastics reinforcement
- BS-3396-2 - Woven glass fibre fabrics for plastics reinforcement
- BS-3396-3 - Woven glass fibre fabrics for plastics reinforcement
- BS-3749 - Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems
- BS-3953 - Specification for synthetic resin bonded woven glass fabric laminated sheet
- BS-EN-12971-1 - Reinforcements. Specification for textile glass chopped strands
- BS-EN-12971-2 - Reinforcements. Specification for textile glass chopped strands
- BS-EN-12971-3 - Reinforcements. Specification for textile glass chopped strands
- BS-EN-14020-1 - Reinforcements. Specification for textile glass rovings
- BS-EN-14020-2 - Reinforcements. Specification for textile glass rovings
- BS-EN-14020-3 - Reinforcements. Specification for textile glass rovings
- BS-EN-14118-1 - Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats)
- BS-EN-14118-2 - Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats)
- BS-EN-14118-3 - Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats)
- BS-EN-ISO-2078 - Textile glass. Yarns. Designation
- BS-EN-ISO-2078-TC - Tracked Changes. Textile glass. Yarns. Designation
- BS-EN-ISO-9163 - Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
- BS-ISO-15039 - Textile-glass rovings. Determination of solubility of size
- BS-ISO-15100 - Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
- BS-ISO-1887 - Textile glass. Determination of combustible-matter content
- BS-ISO-1888-TC - Tracked Changes. Textile glass. Staple fibres or filaments. Determination of average diameter
- BS-ISO-2559 - Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications
- BS-ISO-2797 - Textile glass. Rovings. Basis for a specification
- BS-ISO-3341 - Textile glass. Yarns. Determination of breaking force and breaking elongation
- BS-ISO-3342 - Textile glass. Mats. Determination of tensile breaking force
- BS-ISO-3374 - Reinforcement products. Mats and fabrics. Determination of mass per unit area
- BS-ISO-3375 - Textile glass. Determination of stiffness of rovings
- BS-ISO-3598 - Textile glass. Yarns. Basis for a specification
- BS-ISO-3616 - Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
- BS-ISO-3616-TC - Tracked Changes. Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
- BS-ISO-4604 - Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method
- BS-ISO-4900 - Textile glass. Mats and fabrics. Determination of contact mouldability
- BS-ISO-5025-TC - Tracked Changes. Reinforcement products. Woven fabrics. Determination of width and length
ISO:
- ISO-15039 - Textile-glass rovings - Determination of solubility of size
- ISO-15039-AM1 - - Amendment 1
- ISO-1887 - Textile glass - Determination of combustible-matter content
- ISO-1888 - Textile glass - Staple fibres or filaments - Determination of average diameter
- ISO-2078 - Textile glass - Yarns - Designation
- ISO-2078-AM1 - - Amendment 1
- ISO-2558 - Textile glass chopped-strand mats for reinforcement of plastics - Determination of time of dissolution of the binder in styrene
- ISO-2559 - Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications
- ISO-2797 - Textile glass - Rovings - Basis for a specification
- ISO-3341 - Textile glass -- Yarns -- Determination of breaking force and breaking elongation
- ISO-3342 - Textile glass - Mats - Determination of tensile breaking force
- ISO-3343 - Reinforcement yarns - Determination of twist balance index
- ISO-3374 - Reinforcement products -- Mats and fabrics -- Determination of mass per unit area
- ISO-3375 - Textile glass - Determination of stiffness of rovings
- ISO-3597-1 - Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods
- ISO-3597-2 - Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength
- ISO-3597-3 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength
- ISO-3597-4 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength
- ISO-3598 - Textile glass - Yarns - Basis for a specification
- ISO-3616 - Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression
- ISO-3616-AM1 - - Amendment 1
- ISO-4603 - Textile glass -- Woven fabrics -- Determination of thickness
- ISO-4603-AM1 - Textile glass - Woven fabrics - Determination of thickness - Amendment 1
- ISO-4604 - Reinforcement fabrics - Determination of conventional flexural stiffness - Fixed-angle flexometer method
- ISO-4606 - Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method
- ISO-4900 - Textile glass - Mats and fabrics - Determination of contact mouldability
- ISO-5025 - Reinforcement products - Woven fabrics - Determination of width and length
- ISO-8516 - Textile glass - Textured yarns - Basis for a specification
- ISO-9163 - Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
Other SDOs:
- DIN-EN-ISO-9163 - Textile Glass - Rovings, Manufacture of Test Specimens & Determination of Tensile Stre
- EN-ISO-2078 - Textile glass - Yarns - Designation - Amendment 1
- EN-ISO-9163 - Textile Glass - Rovings, Manufacture of Test Specimens & Determination of Tensile Stre
- JIS-R-3416 - Finished textile glass fabrics
- JIS-R-3419 - Textile glass chopped strands
- SS-224001 - Textile glass - Method for sampling applicable tobatches
- SS-224011 - Equipment for crop protection - Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench (ISO 22401:2015, IDT)
- SS-224029 - Textile glass - Determination of stiffness of rovings
- SS-224071 - Textile glass - Determination of the average diameter of staple fibres or continuous filaments constituting a textile glass yarn - Cross-section method
- SS-224137 - Textile glass - Glass mats - Determination of mass per unit area
- SS-224139 - Textile glass - Mats (made from chopped or continuous strands) - Basis for a specification
- SS-224141 - Textile glass - Woven fabrics - Determination of number of yarns per unit length of warp and weft
- SS-224143 - Textile glass - Woven fabrics - Determination of thickness
- SS-EN-12654-1 - Textile glass - Yarns - Part 1: Designation
- SS-EN-12654-2 - Textile glass - Yarns - Part 2: Methods of test and general specifications
- SS-EN-12654-3 - Textile glass - Yarns - Part 3: General requirements for general applications
- SS-EN-12971-1 - Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
- SS-EN-12971-2 - Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements
- SS-EN-12971-3 - Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
- SS-EN-14020-1 - Reinforcements - Specification for textile glass rovings - Part 1: Designation
- SS-EN-14020-2 - Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
- SS-EN-14020-3 - Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
- SS-EN-14118-1 - Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation
- SS-EN-14118-2 - Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements
- SS-EN-14118-3 - Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
- SS-EN-ISO-1886 - Reinforcement fibres - Sampling plans applicable to received batches (ISO 1886:1990)
- SS-EN-ISO-1890 - Reinforcement yarns - Determination of twist (ISO 1890:2009)
- SS-EN-ISO-2078 - Textile glass - Yarns - Designation (ISO 2078:1993)
- SS-EN-ISO-2078-AM1 - Textile glass - Yarns - Designation - Amendment 1 (ISO 2078:1993/Amd 1:2015)
- SS-EN-ISO-9163 - Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
- SS-ISO-1887 - Textile glass - Determination of combustible-matter content
- SS-ISO-1888 - Textile glass - Staple fibres or filaments - Determination of average diameter (ISO 1888:1996, IDT)
- SS-ISO-2559 - Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications (ISO 2559:2011, IDT)
- SS-ISO-3342 - Textile glass - Mats - Determination of tensile breaking force (ISO 3342:2011, IDT)
- SS-ISO-3343 - Textile glass - Yarns - Determination of twist balance index
- SS-ISO-3374 - Reinforcement products - Mats and fabrics - Determination of mass per unit area (ISO 3374:2000, IDT)
- SS-ISO-3375 - Textile glass - Determination of stiffness of rovings (ISO 3375:2009, IDT)
- SS-ISO-3597-1 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods (ISO 3597-1:2003, IDT)
- SS-ISO-3597-2 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength (ISO 3597-2:2003, IDT)
- SS-ISO-3597-3 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength (ISO 3597-3:2003, IDT)
- SS-ISO-3597-4 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength (ISO 3597-4:2003, IDT)
- SS-ISO-3605 - Textile glass - Rovings - Determination of compressive strength of rod composites
- SS-ISO-4603 - Textile glass - Woven fabrics - Determination of thickness
- SS-ISO-4604 - Reinforcement fabrics - Determination of conventional flexural stiffness - Fixed-angle flexometer method (ISO 4604:2011, IDT)
- SS-ISO-4900 - Textile glass - Mats and fabrics - Determination of contact mouldability (ISO 4900:2011, IDT)
- SS-ISO-5025 - Reinforcement products - Woven fabrics - Determination of width and length
- UNE-EN-ISO-2078 - Textile Glass. Yarns. Designation
- UNE-EN-ISO-2078/A1 - Textile glass - Yarns - Designation - Amendment 1