Document Center is acquired by Nimonik

Document Center List of Standards on Space Systems And Operations Including Space Data And Information Transfer Systems, And Ground Support Equipment For Launch Site Operations

ICS Code 49.140

Return to ICS Index.

Up to Level 1:

• 49 (AIRCRAFT AND SPACE VEHICLE ENGINEERING)

The following documents are a part of this series:

ASTM:

• ASTM-D2508 - Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
• ASTM-D7194 - Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
• ASTM-E1216 - Standard Practice for Sampling for Particulate Contamination by Tape Lift
• ASTM-E1234 - Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
• ASTM-E1235 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
• ASTM-E2581 - Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
• ASTM-E2900 - Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout
• ASTM-E296 - Standard Practice for Ionization Gage Application to Space Simulators
• ASTM-E349 - Standard Terminology Relating to Space Simulation
• ASTM-E491 - Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
• ASTM-F2690 - Standard Guide for Suggested Procedures for Applying for a Flight Authority for an Unmanned Aircraft System: Part I and Part II (Withdrawn 2014)
• ASTM-F3064 - Standard Specification for Aircraft Powerplant Control, Operation, and Indication

BSI:

• BS-185-18 - Glossary of aeronautical and astronautical terms
• BS-EN-13290-2 - Space project management. General requirements
• BS-EN-13290-3 - Space project management. General requirements
• BS-EN-13290-4 - Space project management. General requirements
• BS-EN-13290-5 - Space project management. General requirements
• BS-EN-13290-6 - Space project management. General requirements
• BS-EN-13290-7 - Space project management. General requirements. Cost and schedule management
• BS-EN-13291-1 - Space products assurance. General requirements
• BS-EN-13291-2 - Space product assurance. General requirements. Quality assurance
• BS-EN-13291-3 - Space products assurance. General requirements. Materials, mechanical parts and processes
• BS-EN-13701 - Space systems. Glossary of terms
• BS-EN-14089 - Space product assurance. The control of limited shelf-life materials
• BS-EN-14090 - Space product assurance. Flammability testing for the screening of space materials
• BS-EN-14091 - Space product assurance. Thermal vacuum outgassing test for the screening of space materials
• BS-EN-14092 - Space engineering. Space environment
• BS-EN-14093 - Space project management. Organization and conduct of reviews
• BS-EN-14097 - Space product assurance. Nonconformance control system
• BS-EN-14098 - Space product assurance. Thermal cycling test for the screening of space materials and processes
• BS-EN-14099 - Space product assurance. Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
• BS-EN-14100 - Space product assurance. The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
• BS-EN-14101 - Space product assurance. Material selection for controlling stress-corrosion cracking
• BS-EN-14160 - Space engineering. Software
• BS-EN-14165 - Space engineering standards. Fracture control
• BS-EN-14514 - Space engineering standards. Functional analysis
• BS-EN-14607-1 - Space engineering. Mechanical. Thermal control
• BS-EN-14607-2 - Space engineering. Mechanical. Structural
• BS-EN-14607-5-1 - Space engineering. Mechanical. Liquid and electric propulsion for spacecraft
• BS-EN-14607-7 - Space engineering. Mechanical. Mechanical parts
• BS-EN-14607-8 - Space engineering. Mechanical
• BS-EN-14612 - Space product assurance. Verification and approval of automatic machine wave soldering
• BS-EN-14724 - Space project management. Tailoring of space standards
• BS-EN-14725 - Space engineering. Verification
• BS-EN-14736 - Space product assurance. Quality assurance for test centres
• BS-EN-14737-1 - Space engineering. Ground systems and operations
• BS-EN-14737-2 - Space engineering. Ground systems and operations
• BS-EN-14738 - Space product assurance. Hazard analysis
• BS-EN-14777 - Space engineering. Multipaction design and test
• BS-EN-14824 - Space engineering. Testing
• BS-EN-16601-00 - Space system. EN 16600 series. Description, implementation and general requirements
• BS-EN-16601-00-01 - Space systems. Glossary of terms
• BS-EN-16601-10 - Space project management. Project planning and implementation
• BS-EN-16601-10-01 - Space project management
• BS-EN-16601-40 - Space project management
• BS-EN-16601-60 - Space project management
• BS-EN-16601-80 - Space project management
• BS-EN-16602-10 - Space product assurance. Product assurance management
• BS-EN-16602-10-04 - Space product assurance. Critical-item control
• BS-EN-16602-10-09 - Space product assurance. Nonconformance control system
• BS-EN-16602-10-09-TC - Tracked Changes. Space product assurance. Nonconformance control system
• BS-EN-16602-20 - Space product assurance. Quality assurance
• BS-EN-16602-20-07 - Space product assurance. Quality and safety assurance for space test centres
• BS-EN-16602-20-08 - Space product assurance. Storage, handling and transportation of spacecraft hardware
• BS-EN-16602-20-10 - Space product assurance. Off-the-shelf items utilization in space systems
• BS-EN-16602-20-TC - Tracked Changes. Space product assurance. Quality assurance
• BS-EN-16602-30 - Space product assurance. Dependability
• BS-EN-16602-30-02 - Space product assurance. Failure modes, effects (and criticality) analysis (FMEA/FMECA)
• BS-EN-16602-30-09 - Space product assurance. Availability analysis
• BS-EN-16602-30-11 - Space product assurance. Derating. EEE components
• BS-EN-16602-30-11-TC - Tracked Changes. Space product assurance. Derating. EEE components
• BS-EN-16602-40 - Space product assurance. Safety
• BS-EN-16602-40-02 - Space product assurance. Hazard analysis
• BS-EN-16602-40-12 - Space product assurance. Fault tree analysis. Adoption notice ECSS/IEC 61025
• BS-EN-16602-60 - Space product assurance. Electrical, electronic and electromechanical (EEE) components
• BS-EN-16602-60-02 - Space product assurance. ASIC and FPGA development
• BS-EN-16602-60-05 - Space product assurance. Generic procurement requirements for hybrids
• BS-EN-16602-60-12 - Space product assurance. Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs)
• BS-EN-16602-60-13 - Space product assurance. Commercial electrical, electronic and electromechanical (EEE) components
• BS-EN-16602-60-13-TC - Tracked Changes. Space product assurance. Commercial electrical, electronic and electromechanical (EEE) components
• BS-EN-16602-60-14 - Space product assurance. Relifing procedure. EEE components
• BS-EN-16602-60-15 - Space product assurance. Radiation hardness assurance. EEE components
• BS-EN-16602-70 - Space product assurance. Materials, mechanical parts and processes
• BS-EN-16602-70-01 - Space product assurance. Cleanliness and contamination control
• BS-EN-16602-70-02 - Space product assurance. Thermal vacuum outgassing test for the screening of space materials
• BS-EN-16602-70-03 - Space product assurance. Black-anodizing of metals with inorganic dyes
• BS-EN-16602-70-04 - Space product assurance. Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies
• BS-EN-16602-70-05 - Space product assurance. Detection of organic contamination surfaces by infrared spectroscopy
• BS-EN-16602-70-06 - Space product assurance. Particle and UV radiation testing for space materials
• BS-EN-16602-70-07 - Space product assurance. Verification and approval of automatic machine wave soldering
• BS-EN-16602-70-08 - Space product assurance. Manual soldering of high-reliability electrical connections
• BS-EN-16602-70-09 - Space product assurance. Measurements of thermo-optical properties of thermal control materials
• BS-EN-16602-70-10 - Space product assurance. Qualification of printed circuit boards
• BS-EN-16602-70-11 - Space product assurance. Procurement of printed circuit boards
• BS-EN-16602-70-12 - Space product assurance. Design rules for printed circuit boards
• BS-EN-16602-70-13 - Space product assurance. Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
• BS-EN-16602-70-13-TC - Tracked Changes. Space product assurance. Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
• BS-EN-16602-70-14 - Space product assurance. Corrosion
• BS-EN-16602-70-15 - Space product assurance. Non-destructive testing
• BS-EN-16602-70-16 - Space engineering. Adhesive bonding for spacecraft and launcher applications
• BS-EN-16602-70-18 - Space product assurance. Preparation, assembly and mounting of RF coaxial cables
• BS-EN-16602-70-20 - Space product assurance. Determination of the susceptibility of silver-plated copper wire and cable to 'red-plague' corrosion
• BS-EN-16602-70-21 - Space product assurance. Flammability testing for the screening of space materials
• BS-EN-16602-70-22 - Space product assurance. Control of limited shelf-life materials
• BS-EN-16602-70-26 - Space product assurance. Crimping of high-reliability electrical connections
• BS-EN-16602-70-28 - Space product assurance. Repair and modification of printed circuit board assemblies for space use
• BS-EN-16602-70-29 - Space product assurance. Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
• BS-EN-16602-70-30 - Space product assurance. Wire wrapping of high-reliability electrical connections
• BS-EN-16602-70-31 - Space product assurance. Application of paints and coatings on space hardware
• BS-EN-16602-70-36 - Space product assurance. Material selection for controlling stress-corrosion cracking
• BS-EN-16602-70-37 - Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking
• BS-EN-16602-70-39 - Space product assurance. Welding of metallic materials for flight hardware
• BS-EN-16602-70-40 - Space product assurance. Processing and quality assurance requirements for hard brazing of metallic materials for flight hardware
• BS-EN-16602-70-45 - Space product assurance. Mechanical testing of metallic materials
• BS-EN-16602-70-46 - Space product assurance. Requirements for manufacturing and procurement of threaded fasteners
• BS-EN-16602-70-50 - Space product assurance. Particles contamination monitoring for spacecraft systems and cleanrooms
• BS-EN-16602-70-53 - Space product assurance. Materials and hardware compatibility tests for sterilization processes
• BS-EN-16602-70-54 - Space product assurance. Ultracleaning of flight hardware
• BS-EN-16602-70-55 - Space product assurance. Microbiological examination of flight hardware and cleanrooms
• BS-EN-16602-70-56 - Space product assurance. Vapour Phase Bioburden Reduction for Flight Hardware
• BS-EN-16602-70-57 - Space product assurance. Dry Heat Bioburden Reduction for Flight Hardware
• BS-EN-16602-70-58 - Space product assurance. Bioburden control of cleanrooms
• BS-EN-16602-70-60 - Space product assurance. Qualification and Procurement of printed circuit boards
• BS-EN-16602-70-71 - Space product assurance. Materials, processes and their data selection
• BS-EN-16602-80 - Space product assurance. Software product assurance
• BS-EN-16603-10 - Space engineering. System engineering general requirements
• BS-EN-16603-10-02 - Space engineering. Verification
• BS-EN-16603-10-02-TC - Tracked Changes. Space engineering. Verification
• BS-EN-16603-10-03 - Space engineering. Testing
• BS-EN-16603-10-03-TC - Tracked Changes. Space engineering. Testing
• BS-EN-16603-10-04 - Space engineering. Space environment
• BS-EN-16603-10-06 - Space engineering
• BS-EN-16603-10-09 - Space engineering. Reference coordinate system
• BS-EN-16603-10-11 - Space engineering. Human factors engineering
• BS-EN-16603-10-12 - Space engineering. Method for the calculation of radiation received and its effects, and a policy for design margins
• BS-EN-16603-10-24 - Space engineering. Interface management
• BS-EN-16603-11 - Space engineering. Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment
• BS-EN-16603-20 - Space engineering. Electrical and electronic
• BS-EN-16603-20-01 - Space engineering. Multipactor, design and test
• BS-EN-16603-20-06 - Space engineering. Spacecraft charging
• BS-EN-16603-20-07 - Space engineering. Electromagnetic compatibility
• BS-EN-16603-20-07-TC - Tracked Changes. Space engineering. Electromagnetic compatibility
• BS-EN-16603-20-08 - Space engineering
• BS-EN-16603-20-08-TC - Tracked Changes. Space engineering. Photovoltaic assemblies and components
• BS-EN-16603-20-20 - Space engineering. Electrical design and interface requirements for power supply
• BS-EN-16603-20-21 - Space engineering. Interface requirements for electrical actuators
• BS-EN-16603-20-40 - Space engineering. ASIC, FPGA and IP Core engineering
• BS-EN-16603-20-TC - Tracked Changes. Space engineering. Electrical and electronic
• BS-EN-16603-31 - Space engineering. Thermal control general requirements
• BS-EN-16603-31-02 - Space engineering. Two-phase heat transport equipment
• BS-EN-16603-32 - Space engineering. Structural general requirements
• BS-EN-16603-32-01 - Space engineering. Fracture control
• BS-EN-16603-32-01-TC - Tracked Changes. Space engineering. Fracture control
• BS-EN-16603-32-02 - Space engineering. Structural design and verification of pressurized hardware
• BS-EN-16603-32-03 - Space engineering. Structural finite element models
• BS-EN-16603-32-08 - Space engineering. Materials
• BS-EN-16603-32-10 - Space engineering. Structural factors of safety for spaceflight hardware
• BS-EN-16603-32-11 - Space engineering. Modal survey assessment
• BS-EN-16603-34 - Space engineering
• BS-EN-16603-35 - Space engineering. Propulsion general requirements
• BS-EN-16603-35-01 - Space engineering. Liquid and electric propulsion for spacecraft
• BS-EN-16603-35-02 - Space engineering. Solid propulsion for spacecrafts and launchers
• BS-EN-16603-35-03 - Space engineering. Liquid propulsion for launchers
• BS-EN-16603-35-06 - Space engineering. Cleanliness requirements for spacecraft propulsion hardware
• BS-EN-16603-35-06-TC - Tracked Changes. Space engineering. Cleanliness requirements for spacecraft propulsion hardware
• BS-EN-16603-35-10 - Space engineering. Compatibility testing for liquid propulsion components, subsystems and systems
• BS-EN-16603-40 - Space engineering
• BS-EN-16603-40-07 - Space engineering. Simulation modelling platform
• BS-EN-16603-50 - Space engineering. Communications
• BS-EN-16603-50-01 - Space engineering. Space data links. Telemetry synchronization and channel coding
• BS-EN-16603-50-02 - Space engineering. Ranging and Doppler tracking
• BS-EN-16603-50-03 - Space engineering. Space data links. Telemetry transfer frame protocol
• BS-EN-16603-50-04 - Space engineering. Space data links. Telecommand protocols, synchronization and channel coding
• BS-EN-16603-50-05 - Space engineering. Radio frequency and modulation
• BS-EN-16603-50-11 - Space engineering. SpaceFibre. Very high-speed serial link
• BS-EN-16603-50-12 - Space engineering. SpaceWire. Links, nodes, routers and networks
• BS-EN-16603-50-13 - Space engineering. Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft
• BS-EN-16603-50-14 - Space engineering. Spacecraft discrete interfaces
• BS-EN-16603-50-15 - Space engineering. CANbus extention protocol
• BS-EN-16603-50-16 - Space engineering. Time triggered Ethernet
• BS-EN-16603-50-21 - Space engineering. Adoption Notice of CCSDS 131.0-B-3, TM Synchronization and Channel Coding
• BS-EN-16603-50-22 - Space engineering. Adoption Notice of CCSDS 132.0-B-2, TM Space Data Link Protocol
• BS-EN-16603-50-23 - Space engineering. Adoption Notice of CCSDS 732.0-B-3, AOS Space Data Link Protocol
• BS-EN-16603-50-24 - Space engineering. Adoption Notice of CCSDS 231.0-B-3, TC Synchronization and Channel Coding
• BS-EN-16603-50-25 - Space engineering - Adoption Notice of CCSDS 232.0-B-3, TC Space Data Link Protocol
• BS-EN-16603-50-26 - Space engineering. Adoption Notice of CCSDS 232.1-B-2, Communications Operation Procedure-1
• BS-EN-16603-50-51 - Space engineering. SpaceWire protocol identification
• BS-EN-16603-50-52 - Space engineering. SpaceWire. Remote memory access protocol
• BS-EN-16603-50-53 - Space engineering. SpaceWire. CCSDS packet transfer protocol
• BS-EN-16603-50-TC - Tracked Changes. Space engineering. Communications
• BS-EN-16603-60-10 - Space engineering. Control performances
• BS-EN-16603-60-21 - Space engineering. Gyros terminology and performance specification
• BS-EN-16603-60-30 - Space engineering. Satellite AOCS requirements
• BS-EN-16603-70 - Space engineering. Ground systems and operations
• BS-EN-16603-70-01 - Space engineering. On-board control procedures
• BS-EN-16603-70-11 - Space engineering. Space segment operability
• BS-EN-16603-70-31 - Space engineering. Ground systems and operations. Monitoring and control data definition
• BS-EN-16603-70-32 - Space engineering. Test and operations procedure language
• BS-EN-16603-70-41 - Space engineering. Telemetry and telecommand packet utilization
• BS-EN-16604-10 - Space sustainability. Space debris mitigation requirements
• BS-EN-16604-10-TC - Tracked Changes. Space sustainability - Space debris mitigation requirements
• BS-EN-16604-20 - Space sustainability. Planetary protection
• BS-EN-16604-30-03 - Space. Space Situational Awareness Monitoring
• BS-EN-16803-1 - Space. Use of GNSS-based positioning for road Intelligent Transport Systems (ITS)
• BS-EN-17350 - SCM. Scheduling and Commanding Message. Standard
• BS-EN-4730 - Aerospace series. Anthropometric dimensioning of aircraft seats
• BS-EN-9223-100 - Programme Management. Configuration Management
• BS-EN-9277 - Aerospace series. Programme Management. Guide for the management of Systems Engineering
• BS-EN-ISO-14620-1 - Space systems. Safety requirements
• BS-EN-ISO-16091 - Space systems. Integrated logistic support
• BS-EN-ISO-17666 - Space systems. Risk management
• BS-EN-ISO-21351 - Space systems. Functional and technical specifications
• BS-ISO-10537 - Space data and information transfer systems. Encapsulation service
• BS-ISO-10784-1 - Space systems. Early operations
• BS-ISO-10784-2 - Space systems. Early operations
• BS-ISO-10784-3 - Space systems. Early operations
• BS-ISO-10785 - Space systems. Bellows. Design and operation
• BS-ISO-10786 - Space systems. Structural components and assemblies
• BS-ISO-10789 - Space systems. Programme management. Information and documentation management
• BS-ISO-10794 - Space systems. Programme management. Material, mechanical parts and processes
• BS-ISO-10795 - Space systems. Programme management and quality. Vocabulary
• BS-ISO-10830 - Space systems. Non-destructive testing. Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
• BS-ISO-11104 - Space data and information transfer systems. Time code formats
• BS-ISO-11221 - Space systems. Space solar panels. Spacecraft charging induced electrostatic discharge test methods
• BS-ISO-11227 - Space systems. Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact
• BS-ISO-11231 - Space systems. Probabilistic risk assessment (PRA)
• BS-ISO-11892 - Space systems. Subsystems or units to spacecraft interface control document
• BS-ISO-11892-TC - Tracked Changes. Space systems. Subsystems or units to spacecraft interface control document
• BS-ISO-12171 - Space data and information transfer systems. Telecommand. Channel service
• BS-ISO-12172 - Space data and information transfer systems. Telecommand. Data routing service
• BS-ISO-12173 - Space data and information transfer systems. Telecommand. Command operation procedures
• BS-ISO-12174 - Space data and information transfer systems. Telecommand. Architectural specification for the data management service
• BS-ISO-12175 - Space data and information transfer systems. Standard formatted data units. Structure and construction rules
• BS-ISO-12208 - Space systems. Space environment (natural and artificial). Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences
• BS-ISO-12208-TC - Tracked Changes. Space systems. Space environment (natural and artificial). Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences
• BS-ISO-13419 - Space data and information transfer systems. Packet telemetry
• BS-ISO-13526 - Space data and information transfer systems. Tracking data message
• BS-ISO-13527 - Space data and information transfer systems. XML formatted data unit (XFDU) structure and construction rules
• BS-ISO-13541-TC - Tracked Changes. Space data and information transfer systems. Attitude data messages
• BS-ISO-14200 - Space environment (natural and artificial). Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km)
• BS-ISO-14200-TC - Tracked Changes. Space environment (natural and artificial). Process-based implementation of meteoroid and debris environment models (orbital altitudes below GEO + 2 000 km)
• BS-ISO-14222 - Space environment (natural and artificial). Earth's atmosphere from ground level upward
• BS-ISO-14222-TC - Tracked Changes. Space environment (natural and artificial). Earth's atmosphere from ground level upward
• BS-ISO-14300-1 - Space systems. Programme management
• BS-ISO-14300-1-TC - Tracked Changes. Space systems. Programme management
• BS-ISO-14300-2 - Space systems. Programme management
• BS-ISO-14300-2-TC - Tracked Changes. Space systems. Programme management
• BS-ISO-14302-TC - Tracked Changes. Space systems. Electromagnetic compatibility requirements
• BS-ISO-14303 - Space systems. Launch-vehicle-to-spacecraft interfaces
• BS-ISO-14619 - Space systems. Space experiments. General requirements
• BS-ISO-14619-TC - Tracked Changes. Space systems. Space experiments. General requirements
• BS-ISO-14620-1 - Space systems. Safety requirements
• BS-ISO-14620-2 - Space systems. Safety requirements
• BS-ISO-14620-2-TC - Tracked Changes. Space systems. Safety requirements
• BS-ISO-14620-3 - Space systems. Safety requirements
• BS-ISO-14621-1 - Space systems. Electrical, electronic and electromechanical (EEE) parts
• BS-ISO-14624-1 - Space systems. Safety and compatibility of materials
• BS-ISO-14624-2-TC - Tracked Changes. Space systems - Safety and compatibility of materials
• BS-ISO-14624-3 - Space systems. Safety and compatibility of materials
• BS-ISO-14624-3-TC - Tracked Changes. Space systems. Safety and compatibility of materials
• BS-ISO-14625 - Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements
• BS-ISO-14625-TC - Tracked Changes. Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements
• BS-ISO-14721 - Space data and information transfer systems. Open archival information system (OAIS). Reference model
• BS-ISO-14950 - Space systems. Unmanned spacecraft operability
• BS-ISO-14951-1 - Space systems. Fluid characteristics
• BS-ISO-14951-10 - Space systems. Fluid characteristics. Water
• BS-ISO-14951-11 - Space systems. Fluid characteristics
• BS-ISO-14951-12 - Space systems. Fluid characteristics
• BS-ISO-14951-13 - Space systems. Fluid characteristics
• BS-ISO-14951-2 - Space systems. Fluid characteristics
• BS-ISO-14951-3 - Space systems. Fluid characteristics
• BS-ISO-14951-4 - Space systems. Fluid characteristics. Helium
• BS-ISO-14951-5 - Space systems. Fluid characteristics
• BS-ISO-14951-6 - Space systems. Fluid characteristics
• BS-ISO-14951-7 - Space systems. Fluid characteristics
• BS-ISO-14951-8 - Space systems. Fluid characteristics
• BS-ISO-14951-9 - Space systems. Fluid characteristics. Argon
• BS-ISO-14953 - Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
• BS-ISO-14953-TC - Tracked Changes. Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
• BS-ISO-14954 - Space systems. Dynamic and static analysis. Exchange of mathematical models
• BS-ISO-14961 - Space data and information transfer systems. Parameter value language specification
• BS-ISO-15388 - Space systems. Contamination and cleanliness control
• BS-ISO-15389 - Space systems. Flight-to-ground umbilicals
• BS-ISO-15389-TC - Tracked Changes. Space systems. Flight-to-ground umbilicals
• BS-ISO-15396 - Space data and information transfer systems. Cross support reference model. Space link extension services
• BS-ISO-15856 - Space systems. Space environment. Simulation guidelines for radiation exposure of non-metallic materials
• BS-ISO-15860 - Space systems. Gas contamination. Measurement methods for field tests
• BS-ISO-15862 - Space systems. Launch-vehicle-to-spacecraft flight environments telemetry data processing
• BS-ISO-15863 - Space systems. Spacecraft-to-launch-vehicle interface control document
• BS-ISO-15864-TC - Tracked Changes. Space systems. General test methods for spacecraft, subsystems and units
• BS-ISO-15865 - Space systems. Qualification assessment
• BS-ISO-15887 - Space data and information transfer systems. Lossless data compression
• BS-ISO-15889 - Space data and information transfer systems. The data description language EAST specification
• BS-ISO-16091 - Space systems. Integrated logistic support
• BS-ISO-16126 - Space systems. Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal
• BS-ISO-16127 - Space systems. Prevention of break-up of unmanned spacecraft
• BS-ISO-16159 - Space systems. Launch pad and integration site. Facility, system and equipment failure analysis
• BS-ISO-16164 - Space systems. Disposal of satellites operating in or crossing Low Earth Orbit
• BS-ISO-16192 - Space systems. Lessons learned. Principles and guidelines
• BS-ISO-16192-TC - Tracked Changes. Space systems. Lessons learned. Principles and guidelines
• BS-ISO-16290 - Space systems. Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment
• BS-ISO-16363 - Space data and information transfer systems. Audit and certification of trustworthy digital repositories
• BS-ISO-16378-TC - Tracked Changes. Space systems. Measurements of thermo-optical properties of thermal control materials
• BS-ISO-16404 - Space systems. Programme management. Requirements management
• BS-ISO-16454-TC - Tracked Changes. Space systems. Structural design. Stress analysis requirements
• BS-ISO-16457 - Space environment (natural and artificial). The Earth's ionosphere model. International reference ionosphere (IRI) model and extensions to the plasmasphere
• BS-ISO-16457-TC - Tracked Changes. Space environment (natural and artificial). The Earth's ionosphere model. International reference ionosphere (IRI) model and extensions to the plasmasphere
• BS-ISO-16679 - Space systems. Relative motion analysis elements after LV/SC separation
• BS-ISO-16691 - Space systems. Thermal control coatings for spacecraft. General requirements
• BS-ISO-16694 - Space systems. The measured parameters at firing bench and flight tests of liquid rocket engines
• BS-ISO-16695 - Space environment (natural and artificial). Geomagnetic reference models
• BS-ISO-16698 - Space environment (natural and artificial). Methods for estimation of future geomagnetic activity
• BS-ISO-16699 - Space systems. Disposal of orbital launch stages
• BS-ISO-16726 - Space systems. Human-life activity support systems and equipment integration in space flight. Techno-medical requirements for space vehicle human habitation environments. Requirements for the air quality affected by harmful chemical contaminants
• BS-ISO-16781 - Space systems. Simulation requirements for control system
• BS-ISO-16919 - Space data and information transfer systems. Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
• BS-ISO-17107 - Space data and information transfer systems. XML specification for navigation data messages
• BS-ISO-17214 - Space data and information transfer systems. Spacecraft onboard interface services. Time access service
• BS-ISO-17255 - Space systems. Programme management. Statement of work
• BS-ISO-17355 - Space data and information transfer systems. CCSDS file delivery protocol
• BS-ISO-17399 - Space systems. Man-systems integration
• BS-ISO-17401 - Space systems. Spacecraft interface requirements document for launch vehicle services
• BS-ISO-17433 - Space data and information transfer systems. Packet telemetry services
• BS-ISO-17520 - Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
• BS-ISO-17520-TC - Tracked Changes. Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
• BS-ISO-17540 - Space systems. Liquid rocket engines and test stands. Terms and definitions
• BS-ISO-17546 - Space systems. Lithium ion battery for space vehicles. Design and verification requirements
• BS-ISO-17546-TC - Tracked Changes. Space systems. Lithium ion battery for space vehicles. Design and verification requirements
• BS-ISO-17689 - Space systems. Interface control documents between ground systems, ground support equipment and launch vehicle with payload
• BS-ISO-17689-TC - Tracked Changes. Space systems. Interface control documents between ground systems, ground support equipment and launch vehicle with payload
• BS-ISO-17761 - Space environment (natural and artificial). Model of high energy radiation at low altitudes (300 km to 600 km)
• BS-ISO-17763 - Space systems. Human-life activity support systems and equipment integration in space flight
• BS-ISO-17770 - Space systems. Cube satellites (CubeSats)
• BS-ISO-17807 - Space data and information transfer systems. Asynchronous message service
• BS-ISO-17808 - Space data and information transfer systems. Telemetry (TM) channel coding profiles
• BS-ISO-17809 - Space data and information transfer systems. Delta-differential one-way ranging (Delta-DOR) operations
• BS-ISO-17810 - Space data and information transfer systems. Data transmission and pseud o-random noise (PN) ranging for 2 GHz code division multiple access (CDM A) link via data relay satellite
• BS-ISO-17851 - Space systems. Space environment simulation for material tests. General principles and criteria
• BS-ISO-17854 - Space data and information transfer systems. Flexible advanced coding and modulation scheme for high rate telemetry applications
• BS-ISO-18197 - Space systems. Space based services requirements for centimeter class positioning
• BS-ISO-18201 - Space data and information transfer systems. Mission operations reference model
• BS-ISO-18202 - Space data and information transfer systems. Mission operations message abstraction layer
• BS-ISO-18238 - Space systems. Closed loop problem solving management
• BS-ISO-18257 - Space systems. Semiconductor integrated circuits for space applications. Design requirements
• BS-ISO-18322 - Space systems. General management requirements for space test centres
• BS-ISO-18381 - Space data and information transfer systems. Lossless multispectral and hyperspectral image compression
• BS-ISO-18382 - Space data and information transfer systems. Spacecraft onboard interface services. RFID-based inventory management systems
• BS-ISO-18423 - Space data and information transfer systems. Pseudo-Noise (PN) Ranging Systems
• BS-ISO-18424 - Space data and information transfer systems. XML Telemetric and Command Exchange (XTCE)
• BS-ISO-18425 - Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Packet Service
• BS-ISO-18426 - Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Memory Access Service
• BS-ISO-18427 - Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Synchronization Service
• BS-ISO-18428 - Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Device Discovery Service
• BS-ISO-18438 - Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Test Service
• BS-ISO-18439 - Space data and information transfer systems. Space Communication Cross Support. Service Management. Service Specification
• BS-ISO-18440 - Space data and information transfer systems. Space link extension. Internet protocol for transfer services
• BS-ISO-18441 - Space data and information transfer systems. Space link extension. Application program interface for transfer services. Core specification
• BS-ISO-18441-TC - Tracked Changes. Space data and information transfer systems. Space link extension. Application program interface for transfer services. Core specification
• BS-ISO-18442 - Space data and information transfer systems. Space link extension. Application program interface for return all frames service
• BS-ISO-18443 - Space data and information transfer systems. Space link extension. Application program interface for return channel frames service
• BS-ISO-18444 - Space data and information transfer systems. Space link extension. Application program interface for return operational control fields service
• BS-ISO-18445 - Space data and information transfer systems. Space link extension. Application program interface for the forward CLTU service
• BS-ISO-18446 - Space data and information transfer systems. Space link extension. Application program interface for the forward space packet service
• BS-ISO-18676 - Space systems. Requirements and guidelines for the management of systems engineering
• BS-ISO-18676-TC - Tracked Changes. Space systems. Requirements and guidelines for the management of systems engineering
• BS-ISO-19389 - Space data and information transfer systems. Conjunction data message
• BS-ISO-19683 - Space systems. Design qualification and acceptance tests of small spacecraft and units
• BS-ISO-19826 - Space systems. Programme management. Management of product characteristics
• BS-ISO-19923 - Space environment (natural and artificial). Plasma environments for generation of worst case electrical potential differences for spacecraft
• BS-ISO-19924 - Space systems. Acoustic testing
• BS-ISO-19933 - Space systems. Format for spacecraft launch environment test report
• BS-ISO-19971 - Space systems. Spacecraft and launch vehicle combined operation plan (COP) at launch site. General format
• BS-ISO-20104 - Space data and information transfer systems. Producer-Archive Interface Specification (PAIS)
• BS-ISO-20105 - Space data and information transfer systems. Operation of CFDP over encapsulation service
• BS-ISO-20106 - Space data and information transfer systems. Mission operations common object model
• BS-ISO-20107 - Space data and information transfer systems. Spacecraft onboard interface services. Device virtualization service
• BS-ISO-20188 - Space systems. Product assurance requirements for commercial satellites
• BS-ISO-20205 - Space data and information transfer systems. Spacecraft Onboard Interface Systems. Low Data-Rate Wireless Communications for Spacecraft Monitoring and Control
• BS-ISO-20206 - Space data and information transfer systems. IP over CCSDS space links
• BS-ISO-20207 - Space data and information transfer systems. CCSDS Space Link Protocols over ETSI DVB-S2 Standard
• BS-ISO-20208 - Space data and information transfer systems. Delta-DOR Raw Data Exchange Format
• BS-ISO-20210 - Space data and information transfer systems. Mission Operations Message Abstraction Layer. JAVA API
• BS-ISO-20211 - Space data and information transfer systems. Spacecraft Onboard Interface Services. Device Access Service
• BS-ISO-20213 - Space data and information transfer systems. Spacecraft onboard interface services. Message transfer service
• BS-ISO-20214 - Space data and information transfer systems. Security architecture for space data systems
• BS-ISO-20215 - Space data and information transfer systems. CCSDS cryptographic algorithms
• BS-ISO-20216 - Space data and information transfer systems. Spacecraft onboard interface services. Device data pooling service
• BS-ISO-20217 - Space data and information transfer systems. Spacecraft onboard interface services. File and packet store services
• BS-ISO-20618 - Space data and information transfer systems. Spacecraft onboard interface services. Device enumeration service
• BS-ISO-20652 - Space data and information transfer systems. Producer-archive interface. Methodology abstract standard
• BS-ISO-20780 - Space systems. Fiber optic components. Design and verification requirements
• BS-ISO-20892 - Space systems. Launch complexes modernization process. General requirements
• BS-ISO-20893 - Space systems. Detailed space debris mitigation requirements for launch vehicle orbital stages
• BS-ISO-20930 - Space systems. Calibration requirements for satellite-based passive microwave sensors
• BS-ISO-21076 - Space data and information transfer systems. Space communications cross support. Architecture requirements document
• BS-ISO-21077 - Space data and information transfer systems. Digital motion imagery
• BS-ISO-21080 - Space data and information transfer systems. Licklider transmission protocol (LTP) for CCSDS
• BS-ISO-21082 - Mission operations. MAL space packet transport binding and binary encoding
• BS-ISO-21323 - Space data and information transfer systems. Bundle protocol specification
• BS-ISO-21324 - Space data and information transfer systems. Space data link security protocol
• BS-ISO-21348 - Space environment (natural and artificial). Process for determining solar irradiances
• BS-ISO-21349 - Space systems. Project reviews
• BS-ISO-21349-TC - Tracked Changes. Space systems. Project reviews
• BS-ISO-21350 - Space systems. Off-the-shelf item utilization
• BS-ISO-21350-TC - Tracked Changes. Space systems. Off-the-shelf item utilization
• BS-ISO-21442 - Space systems. General requirements for control engineering
• BS-ISO-21459 - Space data and information transfer systems. Proximity-1 space link protocol. Coding and synchronization sublayer
• BS-ISO-21460 - Space data and information transfer systems. Proximity-1 space link protocol. Physical layer
• BS-ISO-21494 - Space systems. Magnetic testing
• BS-ISO-21648 - Space systems. Flywheel module design and testing
• BS-ISO-21886 - Space systems. Configuration management
• BS-ISO-21980 - Space systems. Evaluation of radiation effects on Commercial-Off-The-Shelf (COTS) parts for use on low-orbit satellite
• BS-ISO-22009 - Space systems. Space environment (natural and artificial). Model of the earth's magnetospheric magnetic field
• BS-ISO-22009-TC - Tracked Changes. Space environment (natural and artificial). Model of the Earth's magnetospheric magnetic field
• BS-ISO-22010 - Space systems. Mass properties control
• BS-ISO-22010-TC - Tracked Changes. Space systems. Mass properties control
• BS-ISO-22108 - Space systems. Non-flight items in flight hardware. Identification and control
• BS-ISO-22137 - Space systems. Program management. Test reviews
• BS-ISO-22538-1 - Space systems. Oxygen safety
• BS-ISO-22538-2 - Space systems. Oxygen safety
• BS-ISO-22538-5 - Space systems. Oxygen safety
• BS-ISO-22538-6 - Space systems. Oxygen safety
• BS-ISO-22641 - Space data and information transfer systems. TM (telemetry) synchronization and channel coding
• BS-ISO-22642 - Space data and information transfer systems. TC synchronization and channel coding
• BS-ISO-22644 - Space data and information transfer systems. Orbit data messages
• BS-ISO-22645 - Space data and information transfer systems. TM (telemetry) space data link protocol
• BS-ISO-22646 - Space data and information transfer systems. Space packet protocol
• BS-ISO-22647 - Space data and information transfer systems. Space link identifiers
• BS-ISO-22663 - Space data and information transfer systems. Proximity-1 space link protocol. Data link layer
• BS-ISO-22664 - Space data and information transfer systems. TC (telecommand) space data link protocol
• BS-ISO-22666 - Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
• BS-ISO-22667 - Space data and information transfer systems. Communications operation procedure-1
• BS-ISO-22669 - Space data and information transfer systems. Space link extension (SLE). Return-all-frames service specification
• BS-ISO-22670 - Space data and information transfer systems. Space link extension (SLE). Return-channel-frames service specification
• BS-ISO-22670-TC - Tracked Changes. Space data and information transfer systems. Space link extension (SLE). Return-channel-frames service specification
• BS-ISO-22671 - Space data and information transfer systems. Space link extension (SLE). Forward communications link transmission unit (CLTU) service specification
• BS-ISO-22671-TC - Tracked Changes. Space data and information transfer systems. Space link extension (SLE). Forward communications link transmission unit (CLTU) service specification
• BS-ISO-22672 - Space data and information transfer systems. Space link extension (SLE). Forward space packet service specification
• BS-ISO-22672-TC - Tracked Changes. Space data and information transfer systems. Space link extension (SLE). Forward space packet service specification
• BS-ISO-22772 - Space systems. Requirements of launch vehicle (LV) to electrical ground support equipment (EGSE) interfaces
• BS-ISO-23020 - Space systems. Determination of test methods to characterize material or component properties required for break-up models used for Earth re-entry
• BS-ISO-23038 - Space systems. Space solar cells. Electron and proton irradiation test methods
• BS-ISO-23041 - Space systems. Unmanned spacecraft operational procedures. Documentation
• BS-ISO-23103 - Space link extension. Cross support transfer service. Specification framework
• BS-ISO-23104 - Space link extension. Cross support transfer service. Monitored data service
• BS-ISO-23129 - Space systems. Thermal control coatings for spacecraft. Atomic oxygen protective coatings on polyimide film
• BS-ISO-23135 - Space systems. Verification programme and management process
• BS-ISO-23230 - Space systems. Paints and varnishes. Processes, procedures, and requirements for coating materials and coatings
• BS-ISO-23312 - Space systems. Detailed space debris mitigation requirements for spacecraft
• BS-ISO-23460-TC - Tracked Changes. Space projects. Programme management. Dependability assurance requirements
• BS-ISO-23461 - Space systems. Programme management. Non-conformance control system
• BS-ISO-23462 - Space systems. Guidelines to define the management framework for a space project
• BS-ISO-23569 - Space systems. Spacecraft system level radio frequency (RF) performance test in compact range
• BS-ISO-23835 - Space Systems. Mechanism design and verification
• BS-ISO-24113 - Space systems. Space debris mitigation requirements
• BS-ISO-24245 - Space systems. Global navigation satellite system (GNSS) receiver class codes
• BS-ISO-24246 - Space systems. Requirements for Global Navigation Satellite System (GNSS) positioning augmentation centers
• BS-ISO-24330 - Space systems. Rendezvous and Proximity Operations (RPO) and On Orbit Servicing (OOS). Programmatic principles and practices
• BS-ISO-24411 - Space systems. Micro-vibration testing
• BS-ISO-24637 - Space systems. Electromagnetic interference (EMI) test reporting requirements
• BS-ISO-24638 - Space systems. Pressure components and pressure system integration
• BS-ISO-24638-TC - Tracked Changes. Space systems. Pressure components and pressure system integration
• BS-ISO-26143 - Space data and information transfer systems. Space link extension (SLE). Return operational control fields service specification
• BS-ISO-26143-TC - Tracked Changes. Space data and information transfer systems. Space link extension (SLE). Return operational control fields service specification
• BS-ISO-26868 - Space data and information transfer systems. Image data compression
• BS-ISO-26869 - Space systems. Small-auxiliary-spacecraft (SASC) to-launch-vehicle interface control document
• BS-ISO-26870-TC - Tracked Changes. Space systems. Launch pad and integration site operational documents
• BS-ISO-26900 - Space data and information transfer systems. Orbit data message
• BS-ISO-26900-TC - Tracked Changes. Space data and information transfer systems. Orbit data message
• BS-ISO-27025 - Space systems. Programme management. Product quality assurance requirements
• BS-ISO-27025-TC - Tracked Changes. Space systems. Programme management. Product quality assurance requirements
• BS-ISO-27026-TC - Tracked Changes. Space systems. Programme management. Breakdown of project management structures
• BS-ISO-27852 - Space systems. Estimation of orbit lifetime
• BS-ISO-27852-TC - Tracked Changes. Space systems. Estimation of orbit lifetime
• BS-ISO-9621 - Space systems. Methods to decide thermal vacuum test cycles of recurring production according to precipitation efficiency and reliability
• BS-Z-1 - Space data and information transfer systems. Radio metric and orbit data
• BS-Z-10 - Space data and information transfer systems. Standard formatted data units. Control Authority data structures
• BS-Z-100 - Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements
• BS-Z-12 - Space data and information transfer systems. Telecommand. Channel service. Architectural specification
• BS-Z-17 - Space data and information transfer Systems. Data systems. Lossless data compression
• BS-Z-18 - Space data and information transfer systems. Standard formatted data units. Referencing environment
• BS-Z-19 - Space data and information transfer systems. Data description language. EAST specification
• BS-Z-2 - Space data and information transfer systems. Time code formats
• CWA-15808 - Interfaces for Heterogeneous Missions Accessibility (Earth Observation Ground Segment
• DD-ISO-12208 - Space systems. Space environment (natural and artificial). Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences
• DD-ISO-16457 - Space systems. Space environment (natural and artificial). The Earth's ionosphere model. International reference ionosphere (IRI) model and extensions to the plasmasphere
• PD-CEN-17602-30-01 - Space product assurance. Worst case analysis
• PD-CEN-17602-30-03 - Space product assurance. Human dependability handbook
• PD-CEN-17602-30-08 - Space product assurance. Components reliability data sources and their use
• PD-CEN-17602-60-02 - Space product assurance. Techniques for radiation effects mitigation in ASICs and FPGAs handbook
• PD-CEN-17603-20-06 - Space engineering. Assessment of space worst case charging handbook
• PD-CEN-17603-20-07 - Space engineering. Electromagnetic compatibility handbook
• PD-CEN-17603-20-20 - Space engineering. Guidelines for electrical design and interface requirements for power supply
• PD-CEN-17603-20-21 - Space engineering. Guidelines for electrical design and interface requirements for actuators
• PD-CEN-17603-31-17 - Space engineering. Thermal analysis handbook
• PD-CEN-17603-32-01 - Space engineering. Structural materials handbook
• PD-CEN-17603-32-02 - Space engineering. Structural materials handbook
• PD-CEN-17603-32-03 - Space engineering. Structural materials handbook
• PD-CEN-17603-32-05 - Space engineering. Structural materials handbook
• PD-CEN-17603-32-06 - Space engineering. Structural materials handbook
• PD-CEN-17603-32-07 - Space engineering. Structural materials handbook
• PD-CEN-17603-32-08 - Space engineering. Structural materials handbook
• PD-CEN-17603-32-21 - Space engineering. Adhesive bonding handbook
• PD-CEN-17603-32-22 - Space engineering. Insert design handbook
• PD-CEN-17603-32-23 - Space engineering. Threaded fasteners handbook
• PD-CEN-17603-32-24 - Space engineering. Buckling of structures
• PD-CEN-17603-32-25 - Space engineering. Mechanical shock design and verification handbook
• PD-CEN-17603-32-26 - Space engineering. Spacecraft mechanical loads analysis handbook
• PD-CEN-17603-40 - Space engineering. Software engineering handbook
• PD-CEN-17603-40-01 - Space engineering. Agile software development handbook
• PD-CEN-17603-50 - Space engineering. Communication guidelines
• PD-CEN-17603-60 - Space engineering. Control engineering handbook
• PD-CEN-17603-60-10 - Space engineering. Control performance guidelines
• PD-CEN/CLC-17602-70-23 - Space product assurance. Materials, mechanical parts and processes obsolescence management handbook
• PD-CEN/CLC-17602-80-01 - Space product assurance. Reuse of existing software
• PD-CEN/CLC-17602-80-03 - Space product assurance. Software dependability and safety
• PD-CEN/CLC-17602-80-04 - Space product assurance. Software metrication programme definition and implementation
• PD-CEN/CLC-17602-80-11 - Space product assurance. Software process assessment and improvement
• PD-CEN/CLC-17602-80-12 - Space product assurance. Software process assessment and improvement
• PD-CEN/CLC-17603-10-02 - Space engineering. Verification guidelines
• PD-CEN/CLC-17603-10-03 - Space engineering. Testing guidelines
• PD-CEN/CLC-17603-10-12 - Space engineering. Calculation of radiation and its effects and margin policy handbook
• PD-CEN/CLC-17603-11 - Space engineering. Technology readiness level (TRL) guidelines
• PD-CEN/CLC-17603-20-01 - Space engineering. Multipactor handbook
• PD-CEN/CLC-17603-20-02 - Space engineering. Li-ion battery testing handbook
• PD-CEN/CLC-17603-20-05 - Space engineering. High voltage engineering and design handbook
• PD-CEN/CLC-17603-31-01 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-02 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-03 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-04 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-05 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-06 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-07 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-08 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-09 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-10 - Space engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-11 - Space engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-12 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-13 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-14 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-15 - Space Engineering. Thermal design handbook
• PD-CEN/CLC-17603-31-16 - Space Engineering. Thermal design handbook
• PD-ISO-11225 - Space environment (natural and artificial). Guide to reference and standard atmosphere models
• PD-ISO-11233 - Space systems. Orbit determination and estimation. Process for describing techniques
• PD-ISO-16158 - Space systems. Avoiding collisions with orbiting objects
• PD-ISO-16158-TC - Tracked Changes. Space systems. Avoiding collisions among orbiting objects
• PD-ISO-16697 - Space systems. Safety and compatibility of materials. Method to determine the flammability thresholds of materials
• PD-ISO-17400 - Space systems. Space launch complexes, integration sites and other facilities. General testing guidelines
• PD-ISO-18146 - Space systems. Space debris mitigation design and operation manual for spacecraft
• PD-ISO-18147 - Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
• PD-ISO-18667 - Space systems. Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
• PD-ISO-19473 - Space systems. Best practices for orbit elements at payload. LV separation
• PD-ISO-20517 - Space systems. Cybersecurity management requirements and recommendations
• PD-ISO-20891 - Space systems. Space batteries. Guidelines for in-flight health assessment of lithium-ion batteries
• PD-ISO-20991 - Space systems. Requirements for small spacecraft
• PD-ISO-21979 - Space environment (natural and artificial). Procedure for obtaining worst case and confidence level of fluence using the quasi-dynamic model of earth's radiation belts
• PD-ISO-22591 - Space systems. Space-based services for a high accuracy positioning system with safety requirements
• PD-ISO-23462 - Space systems. Guidelines to define the management framework for a space project
• PD-ISO-23689 - Space environment (natural and artificial). Space weather information for use in space systems operations.
• PD-ISO-23989 - Space environment (natural and artificial). Operational estimation of the solar wind energy input into the Earth's magnetosphere by means of the ground-based magnetic polar cap (PC) index
• PD-ISO-6434 - Space systems. Design, testing and operation of a large constellation of spacecraft
• PD-ISO-6832 - Space systems. Development technology of a thermal vacuum chamber

ISO:

• ISO-10537 - Space data and information transfer systems - Encapsulation service
• ISO-10537-AM1 - - Amendment 1
• ISO-10784-1 - Space systems - Early operations - Part 1: Spacecraft initialization and commissioning
• ISO-10784-2 - Space systems - Early operations - Part 2: Initialization plan
• ISO-10784-3 - Space systems - Early operations - Part 3: Commissioning report
• ISO-10785 - Space systems - Bellows - Design and operation
• ISO-10786 - Space systems - Structural components and assemblies
• ISO-10788 - Space systems - Lunar simulants
• ISO-10789 - Space systems - Programme management - Information and documentation management
• ISO-10794 - Space systems - Programme management - Material, mechanical parts and processes
• ISO-10795 - Space systems - Programme management and quality - Vocabulary
• ISO-10830 - Space systems - Non-destructive testing - Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
• ISO-11103 - Space data and information transfer systems - Radio metric and orbit data
• ISO-11104 - Space data and information transfer systems - Time code formats
• ISO-11221 - Space systems - Space solar panels - Spacecraft charging induced electrostatic discharge test methods
• ISO-11225 - Space environment (natural and artificial) - Guide to reference and standard atmosphere models
• ISO-11227 - Space systems - Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact
• ISO-11227-AM1 - - Amendment 1: Oblique impacts and Annex C update
• ISO-11231 - Space systems - Probabilistic risk assessment (PRA)
• ISO-11233 - Space systems - Orbit determination and estimation - Process for describing techniques
• ISO-11754 - Space data and information transfer systems - Telemetry channel coding
• ISO-11783-14 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 14: Sequence control
• ISO-11892 - Space systems - Subsystems or units to spacecraft interface control document
• ISO-11893 - Space systems - Programme management - Project organization
• ISO-12175 - Space data and information transfer systems - Standard formatted data units - Structure and construction rules
• ISO-12175-AM1 - - Amendment 1
• ISO-12208 - Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences
• ISO-13419 - Space data and information transfer systems - Packet telemetry
• ISO-13420 - Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification
• ISO-13526 - Space data and information transfer systems - Tracking data message
• ISO-13526-AM1 - - Amendment 1
• ISO-13527 - Space data and information transfer systems - XML formatted data unit (XFDU) structure and construction rules
• ISO-13537 - Space data and information transfer systems - Reference architecture for space data systems
• ISO-13541 - Space data and information transfer systems - Attitude data messages
• ISO-13764 - Space data and information transfer systems - Standard formatted data units - Control authority procedures
• ISO-14200 - Space environment (natural and artificial) - Process-based implementation of meteoroid and debris environment models (orbital altitudes below GEO + 2 000 km)
• ISO-14222 - Space environment (natural and artificial) - Earths atmosphere from ground level upward
• ISO-14300-1 - Space systems - Programme management - Part 1: Structuring of a project
• ISO-14300-2 - Space systems - Programme management - Part 2: Product assurance
• ISO-14302 - Space systems - Electromagnetic compatibility requirements
• ISO-14303 - Space systems - Launch-vehicle-to-spacecraft interfaces
• ISO-14619 - Space systems - Space experiments - General requirements
• ISO-14620-1 - Space systems - Safety requirements - Part 1: System safety
• ISO-14620-2 - Space systems - Safety requirements - Part 2: Launch site operations
• ISO-14620-3 - Space systems - Safety requirements - Part 3: Flight safety systems
• ISO-14621-1 - Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 1: Parts management
• ISO-14621-2 - Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 2: Control programme requirements
• ISO-14622 - Space systems -- Structural design -- Loads and induced environment
• ISO-14623 - Space systems - Pressure vessels and pressurized structures - Design and operation
• ISO-14624-1 - Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials
• ISO-14624-2 - Space systems - Safety and compatibility of materials - Part 2: Determination of flammability of electrical-wire insulation and accessory materials
• ISO-14624-3 - Space systems - Safety and compatibility of materials - Part 3: Determination of off-gassed compounds from materials and assembled articles
• ISO-14624-4 - Space systems - Safety and compatibility of materials - Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
• ISO-14624-5 - Space systems - Safety and compatibility of materials - Part 5: Determination of reactivity of system/component materials with aerospace propellants
• ISO-14624-6 - Space systems - Safety and compatibility of materials - Part 6: Determination of reactivity of processing materials with aerospace fluids
• ISO-14624-7 - Space systems - Safety and compatibility of materials - Part 7: Determination of permeability and penetration of materials to aerospace fluids
• ISO-14625 - Space systems - Ground support equipment for use at launch, landing or retrieval sites - General requirements
• ISO-14711 - Space systems - Unmanned mission operations concepts - Guidelines for defining and assessing concept products
• ISO-14721 - Space data and information transfer systems - Open archival information system (OAIS) - Reference model
• ISO-14950 - Space systems - Unmanned spacecraft operability
• ISO-14952-1 - Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary
• ISO-14952-2 - Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness levels
• ISO-14952-3 - Space systems - Surface cleanliness of fluid systems - Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination
• ISO-14952-4 - Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes
• ISO-14952-5 - Space systems - Surface cleanliness of fluid systems - Part 5: Drying processes
• ISO-14952-6 - Space systems - Surface cleanliness of fluid systems - Part 6: Precision-cleaning processes
• ISO-14953 - Space systems - Structural design - Determination of loading levels for static qualification testing of launch vehicles
• ISO-14954 - Space systems - Dynamic and static analysis - Exchange of mathematical models
• ISO-14961 - Space data and information transfer systems -- Parameter value language specification (available in English only)
• ISO-14962 - Space data and information transfer systems - ASCII encoded English
• ISO-15387 - Space systems - Single-junction solar cells - Measurements and calibration procedures
• ISO-15388 - Space systems - Contamination and cleanliness control
• ISO-15389 - Space systems - Flight-to-ground umbilicals
• ISO-15389-1 - Space systems - Flight-to-ground umbilicals - Amendment 1: Prevention of accidental cross-connection
• ISO-15390 - Space environment (natural and artificial) - Galactic cosmic ray model
• ISO-15395 - Space data and information transfer systems - Standard formatted data units - Control authority data structures
• ISO-15396 - Space data and information transfer systems - Cross support reference model - Space link extension services
• ISO-15856 - Space systems - Space environment - Simulation guidelines for radiation exposure of non-metallic materials
• ISO-15859-1 - Space systems - Fluid characteristics, sampling and test methods - Part 1: Oxygen
• ISO-15859-10 - Space systems - Fluid characteristics, sampling and test methods - Part 10: Water
• ISO-15859-11 - Space systems - Fluid characteristics, sampling and test methods - Part 11: Ammonia
• ISO-15859-12 - Space systems - Fluid characteristics, sampling and test methods - Part 12: Carbon dioxide
• ISO-15859-13 - Space systems - Fluid characteristics, sampling and test methods - Part 13: Breathing air
• ISO-15859-2 - Space systems - Fluid characteristics, sampling and test methods - Part 2: Hydrogen
• ISO-15859-3 - Space systems - Fluid characteristics, sampling and test methods - Part 3: Nitrogen
• ISO-15859-4 - Space systems - Fluid characteristics, sampling and test methods - Part 4: Helium
• ISO-15859-5 - Space systems - Fluid characteristics, sampling and test methods - Part 5: Nitrogen tetroxide propellants
• ISO-15859-6 - Space systems - Fluid characteristics, sampling and test methods - Part 6: Monomethylhydrazine propellant
• ISO-15859-7 - Space systems - Fluid characteristics, sampling and test methods - Part 7: Hydrazine propellant
• ISO-15859-8 - Space systems - Fluid characteristics, sampling and test methods - Part 8: Kerosine propellant
• ISO-15859-9 - Space systems - Fluid characteristics, sampling and test methods - Part 9: Argon
• ISO-15860 - Space systems - Gas contamination - Measurement methods for field tests
• ISO-15862 - Space systems - Launch-vehicle-to-spacecraft flight environments telemetry data processing
• ISO-15863 - Space systems - Spacecraft-to-launch-vehicle interface control document
• ISO-15864 - Space systems - General test methods for spacecraft, subsystems and units
• ISO-15865 - Space systems - Qualification assessment
• ISO-15887 - Space data and information transfer systems - Lossless data compression
• ISO-15888 - Space data and information transfer systems -- Standard formatted data units -- Referencing environment
• ISO-15889 - Space data and information transfer systems - The data description language EAST specification
• ISO-15893 - Space data and information transfer systems - Space communications protocol specification (SCPS) - Transport protocol (SCPS-TP)
• ISO-16091 - Space systems - Integrated logistic support
• ISO-16126 - Space systems - Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal
• ISO-16127 - Space systems - Prevention of break-up of unmanned spacecraft
• ISO-16157 - Space systems - Human-life activity support systems and equipment integration in space flight - Techno-medical requirements for space vehicle human habitation environments
• ISO-16158 - Space systems - Avoiding collisions among orbiting objects
• ISO-16159 - Space systems - Launch pad and integration site - Facility, system and equipment failure analysis
• ISO-16164 - Space systems - Disposal of satellites operating in or crossing Low Earth Orbit
• ISO-16192 - Space systems - Lessons learned - Principles and guidelines
• ISO-16290 - Space systems - Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment
• ISO-16363 - Space data and information transfer systems - Audit and certification of trustworthy digital repositories
• ISO-16378 - Space systems - Measurements of thermo-optical properties of thermal control materials
• ISO-16404 - Space systems - Programme management - Requirements management
• ISO-16454 - Space systems - Structural design - Stress analysis requirements
• ISO-16457 - Space environment (natural and artificial) - The Earths ionosphere model - International reference ionosphere (IRI) model and extensions to the plasmasphere
• ISO-16458 - Space systems - Unmanned spacecraft transportation - General requirements
• ISO-16679 - Space systems - Relative motion analysis elements after LV/SC separation
• ISO-16691 - Space systems - Thermal control coatings for spacecraft - General requirements
• ISO-16694 - Space systems - Measured parameters at firing bench and flight tests of liquid rocket engines
• ISO-16695 - Space environment (natural and artificial) - Geomagnetic reference models
• ISO-16697 - Space systems - Safety and compatibility of materials - Method to determine the flammability thresholds of materials
• ISO-16698 - Space environment (natural and artificial) - Methods for estimation of future geomagnetic activity
• ISO-16699 - Space systems - Disposal of orbital launch stages
• ISO-16726 - Space systems - Human-life activity support systems and equipment integration in space flight - Techno-medical requirements for space vehicle human habitation environments - Requirements for the air quality affected by harmful chemical contaminants
• ISO-16781 - Space systems - Simulation requirements for control system
• ISO-16919 - Space data and information transfer systems - Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
• ISO-17107 - Space data and information transfer systems - XML specification for navigation data messages
• ISO-17214 - Space data and information transfer systems - Spacecraft onboard interface services - Time access service
• ISO-17255 - Space systems - Programme management - Statement of work
• ISO-17355 - Space data and information transfer systems - CCSDS file delivery protocol
• ISO-17399 - Space systems - Man-systems integration
• ISO-17400 - Space systems - Space launch complexes, integration sites and other facilities - General testing guidelines
• ISO-17401 - Space systems - Spacecraft interface requirements document for launch vehicle services
• ISO-17520 - Space environment (natural and artificial) - Cosmic ray and solar energetic particle penetration inward the magnetosphere - Method of determination of the effective vertical cut-off rigidity
• ISO-17540 - Space systems - Liquid rocket engines and test stands - Terms and definitions
• ISO-17546 - Space systems - Lithium ion battery for space vehicles - Design and verification requirements
• ISO-17566 - Space systems - General test documentation
• ISO-17666 - Space systems - Risk management
• ISO-17689 - Space systems - Interface control documents between ground systems, ground support equipment and launch vehicle with payload
• ISO-17761 - Space environment (natural and artificial) - Model of high energy radiation at low altitudes (300 km to 600 km)
• ISO-17763 - Space systems - Human-life activity support systems and equipment integration in space flight
• ISO-17770 - Space systems - Cube satellites (CubeSats)
• ISO-17807 - Space data and information transfer systems - Asynchronous message service
• ISO-17808 - Space data and information transfer systems - Telemetry (TM) channel coding profiles
• ISO-17809 - Space data and information transfer systems - Delta-differential one-way ranging (Delta-DOR) operations
• ISO-17810 - Space data and information transfer systems - Data transmission and pseudo-random noise (PN) ranging for 2 GHz code division multiple access (CDMA) link via data relay satellite
• ISO-17851 - Space systems - Space environment simulation for material tests - General principles and criteria
• ISO-17854 - Space data and information transfer systems - Flexible advanced coding and modulation scheme for high rate telemetry applications
• ISO-18146 - Space systems - Space debris mitigation design and operation manual for spacecraft
• ISO-18147 - Space environment (natural and artificial) - Method of the solar energetic protons fluences and peak fluxes determination
• ISO-18197 - Space systems - Space based services requirements for centimetre class positioning
• ISO-18201 - Space data and information transfer systems - Mission operations reference model
• ISO-18202 - Space data and information transfer systems - Mission operations message abstraction layer
• ISO-18238 - Space systems - Closed loop problem solving management
• ISO-18257 - Space systems - Semiconductor integrated circuits for space applications - Design requirements
• ISO-18322 - Space systems - General management requirements for space test centres
• ISO-18381 - Space data and information transfer systems - Lossless multispectral and hyperspectral image compression
• ISO-18382 - Space data and information transfer systems - Spacecraft onboard interface services - RFID-based inventory management systems
• ISO-18423 - Space data and information transfer systems - Pseudo-Noise (PN) Ranging Systems
• ISO-18424 - Space data and information transfer systems - XML Telemetric and Command Exchange (XTCE)
• ISO-18425 - Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Packet Service
• ISO-18426 - Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Memory Access Service
• ISO-18427 - Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Synchronization Service
• ISO-18428 - Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Device Discovery Service
• ISO-18438 - Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Test Service
• ISO-18439 - Space data and information transfer systems - Space Communication Cross Support - Service Management - Service Specification
• ISO-18440 - Space data and information transfer systems - Space link extension - Internet protocol for transfer services
• ISO-18441 - Space data and information transfer systems - Space link extension - Application program interface for transfer services - Core specification
• ISO-18442 - Space data and information transfer systems - Space link extension - Application program interface for return all frames service
• ISO-18443 - Space data and information transfer systems - Space link extension - Application program interface for return channel frames service
• ISO-18444 - Space data and information transfer systems - Space link extension - Application program interface for return operational control fields service
• ISO-18445 - Space data and information transfer systems - Space link extension - Application program interface for the forward CLTU service
• ISO-18446 - Space data and information transfer systems - Space link extension - Application program interface for the forward space packet service
• ISO-18667 - Space systems - Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
• ISO-18676 - Space systems - Requirements and guidelines for the management of systems engineering
• ISO-19389 - Space data and information transfer systems - Conjunction data message
• ISO-19473 - Space systems - Best practices for orbit elements at payload - LV separation
• ISO-19683 - Space systems - Design qualification and acceptance tests of small spacecraft and units
• ISO-19826 - Space systems - Programme management - Management of product characteristics
• ISO-19923 - Space environment (natural and artificial) - Plasma environments for generation of worst case electrical potential differences for spacecraft
• ISO-19924 - Space systems - Acoustic testing
• ISO-19933 - Space systems - Format for spacecraft launch environment test report
• ISO-19971 - Space systems - Spacecraft and launch vehicle combined operation plan (COP) at launch site - General format
• ISO-20104 - Space data and information transfer systems - Producer-Archive Interface Specification (PAIS)
• ISO-20105 - Space data and information transfer systems - Operation of CFDP over encapsulation service
• ISO-20106 - Space data and information transfer systems - Mission operations common object model
• ISO-20107 - Space data and information transfer systems - Spacecraft onboard interface services - Device virtualization service
• ISO-20188 - Space systems - Product assurance requirements for commercial satellites
• ISO-20205 - Space data and information transfer systems - Spacecraft Onboard Interface Systems - Low Data-Rate Wireless Communications for Spacecraft Monitoring and Control
• ISO-20206 - Space data and information transfer systems - IP over CCSDS space links
• ISO-20207 - Space data and information transfer systems - CCSDS Space Link Protocols over ETSI DVB-S2 Standard
• ISO-20208 - Space data and information transfer systems - Delta-DOR Raw Data Exchange Format
• ISO-20210 - Space data and information transfer systems - Mission Operations Message Abstraction Layer - JAVA API
• ISO-20211 - Space data and information transfer systems - Spacecraft Onboard Interface Services - Device Access Service
• ISO-20213 - Space data and information transfer systems - Spacecraft onboard interface services - Message transfer service
• ISO-20214 - Space data and information transfer systems - Security architecture for space data systems
• ISO-20215 - Space data and information transfer systems - CCSDS cryptographic algorithms
• ISO-20216 - Space data and information transfer systems - Spacecraft onboard interface services - Device data pooling service
• ISO-20217 - Space data and information transfer systems - Spacecraft onboard interface services - File and packet store services
• ISO-20517 - Space systems - Cybersecurity management requirements and recommendations
• ISO-20590 - Space systems - Space debris mitigation design and operation manual for launch vehicle orbital stages
• ISO-20618 - Space data and information transfer systems - Spacecraft onboard interface services - Device enumeration service
• ISO-20652 - Space data and information transfer systems - Producer-archive interface - Methodology abstract standard
• ISO-20780 - Space systems - Fiber optic components - Design and verification requirements
• ISO-20891 - Space systems - Space batteries - Guidelines for in-flight health assessment of lithium-ion batteries
• ISO-20892 - Space systems - Launch complexes modernization process - General requirements
• ISO-20893 - Space systems - Detailed space debris mitigation requirements for launch vehicle orbital stages
• ISO-20930 - Space systems - Calibration requirements for satellite-based passive microwave sensors
• ISO-20991 - Space systems - Requirements for small spacecraft
• ISO-21076 - Space data and information transfer systems - Space communications cross support - Architecture requirements document
• ISO-21077 - Space data and information transfer systems - Digital motion imagery
• ISO-21080 - Space data and information transfer systems - Licklider transmission protocol (LTP) for CCSDS
• ISO-21082 - Mission operations - MAL space packet transport binding and binary encoding
• ISO-21323 - Space data and information transfer systems - CCSDS Bundle protocol specification
• ISO-21324 - Space data and information transfer systems - Space data link security protocol
• ISO-21347 - Space systems - Fracture and damage control
• ISO-21348 - Space environment (natural and artificial) - Process for determining solar irradiances
• ISO-21349 - Space systems - Project reviews
• ISO-21350 - Space systems - Off-the-shelf item utilization
• ISO-21351 - Space systems - Functional and technical specifications
• ISO-21442 - Space systems - General requirements for control engineering
• ISO-21459 - Space data and information transfer systems - Proximity-1 space link protocol - Coding and synchronization sublayer
• ISO-21460 - Space data and information transfer systems - Proximity-1 space link protocol - Physical layer
• ISO-21494 - Space systems - Magnetic testing
• ISO-21648 - Space systems - Flywheel module design and testing
• ISO-21886 - Space systems - Configuration management
• ISO-21961 - Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - Abstract syntax
• ISO-21962 - Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - PVL syntax
• ISO-21979 - Space environment (natural and artificial) - Procedure for obtaining worst case and confidence level of fluence using the quasi-dynamic model of earths radiation belts
• ISO-21980 - Space systems - Evaluation of radiation effects on Commercial-Off-The-Shelf (COTS) parts for use on low-orbit satellite
• ISO-22009 - Space environment (natural and artificial) - Model of the Earths magnetospheric magnetic field
• ISO-22010 - Space systems - Mass properties control
• ISO-22108 - Space systems - Non-flight items in flight hardware - Identification and control
• ISO-22137 - Space systems - Program management - Test reviews
• ISO-22538-1 - Space systems - Oxygen safety - Part 1: Design of oxygen systems and components
• ISO-22538-2 - Space systems - Oxygen safety - Part 2: Selection of metallic materials for oxygen systems and components
• ISO-22538-3 - Space systems - Oxygen safety - Part 3: Selection of non-metallic materials for oxygen systems and components
• ISO-22538-4 - Space systems - Oxygen safety - Part 4: Hazards analyses for oxygen systems and components
• ISO-22538-5 - Space systems - Oxygen safety - Part 5: Operational and emergency procedures
• ISO-22538-6 - Space systems - Oxygen safety - Part 6: Facility planning and implementation
• ISO-22591 - Space systems - Space-based services for a high accuracy positioning system with safety requirements
• ISO-22639 - Space systems - Design guidelines for multi-geo spacecraft collocation
• ISO-22641 - Space data and information transfer systems - TM (telemetry) synchronization and channel coding
• ISO-22642 - Space data and information transfer systems - TC synchronization and channel coding
• ISO-22643 - Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - XML/DTD Syntax
• ISO-22644 - Space data and information transfer systems - Orbit data messages
• ISO-22645 - Space data and information transfer systems - TM (telemetry) space data link protocol
• ISO-22645-AM1 - - Amendment 1
• ISO-22646 - Space data and information transfer systems - Space packet protocol
• ISO-22646-AM1 - - Amendment 1
• ISO-22647 - Space data and information transfer systems - Space link identifiers
• ISO-22663 - Space data and information transfer systems - Proximity-1 space link protocol - Data link layer
• ISO-22664 - Space data and information transfer systems - TC (telecommand) space data link protocol
• ISO-22664-AM1 - - Amendment 1
• ISO-22666 - Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol
• ISO-22666-AM1 - - Amendment 1
• ISO-22667 - Space data and information transfer systems - Communications operation procedure-1
• ISO-22669 - Space data and information transfer systems - Space link extension (SLE) - Return-all-frames service specification
• ISO-22670 - Space data and information transfer systems - Space link extension (SLE) - Return-channel-frames service specification
• ISO-22671 - Space data and information transfer systems - Space link extension (SLE) - Forward communications link transmission unit (CLTU) service specification
• ISO-22672 - Space data and information transfer systems - Space link extension (SLE) - Forward space packet service specification
• ISO-22772 - Space systems - Requirements of launch vehicle (LV) to electrical ground support equipment (EGSE) interfaces
• ISO-23020 - Space systems - Determination of test methods to characterize material or component properties required for break-up models used for Earth re-entry
• ISO-23038 - Space systems - Space solar cells - Electron and proton irradiation test methods
• ISO-23041 - Space systems - Unmanned spacecraft operational procedures - Documentation
• ISO-23103 - Space link extension - Cross support transfer service - Specification framework
• ISO-23104 - Space link extension - Cross support transfer service - Monitored data service
• ISO-23129 - Space systems - Thermal control coatings for spacecraft - Atomic oxygen protective coatings on polyimide film
• ISO-23135 - Space systems - Verification programme and management process
• ISO-23230 - Space systems - Paints and varnishes - Processes, procedures, and requirements for coating materials and coatings
• ISO-23312 - Space systems - Detailed space debris mitigation requirements for spacecraft
• ISO-23339 - Space systems - Unmanned spacecraft - Estimating the mass of remaining usable propellant
• ISO-23460 - Space projects - Programme management - Dependability assurance requirements
• ISO-23461 - Space systems - Programme management - Non-conformance control system
• ISO-23462 - Space systems - Guidelines to define the management framework for a space project
• ISO-23569 - Space systems - Spacecraft system level radio frequency (RF) performance test in compact range
• ISO-23638 - Space systems - Pressure components and pressure system integration
• ISO-23670 - Space systems - Vibration testing
• ISO-23689 - Space environment (natural and artificial) - Space weather information for use in space systems operations
• ISO-23835 - Space Systems - Mechanism design and verification
• ISO-23989 - Space environment (natural and artificial) - Operational estimation of the solar wind energy input into the Earths magnetosphere by means of the ground-based magnetic polar cap (PC) index
• ISO-24113 - Space systems - Space debris mitigation requirements
• ISO-24245 - Space systems - Global navigation satellite system (GNSS) receiver class codes
• ISO-24246 - Space systems - Requirements for global navigation satellite system (GNSS) positioning augmentation centers
• ISO-24330 - Space systems - Rendezvous and Proximity Operations (RPO) and On Orbit Servicing (OOS) - Programmatic principles and practices
• ISO-24411 - Space systems - Micro-vibration testing
• ISO-24412 - Space systems - Thermal vacuum environmental testing
• ISO-24564 - Space systems - Adhesives - General requirements
• ISO-24637 - Space systems - Electromagnetic interference (EMI) test reporting requirements
• ISO-24638 - Space systems - Pressure components and pressure system integration
• ISO-24917 - Space systems - General test requirements for launch vehicles
• ISO-26143 - Space data and information transfer systems - Space link extension (SLE) - Return operational control fields service specification
• ISO-26868 - Space data and information transfer systems - Image data compression
• ISO-26869 - Space systems - Small-auxiliary-spacecraft (SASC)-to- launch- vehicle interface control document
• ISO-26870 - Space systems - Launch pad and integration site operational documents
• ISO-26871 - Space systems - Explosive systems and devices
• ISO-26872 - Space systems - Disposal of satellites operating at geosynchronous altitude
• ISO-26900 - Space data and information transfer systems - Orbit data messages
• ISO-27025 - Space systems - Programme management - Product quality assurance requirements
• ISO-27026 - Space systems - Programme management - Breakdown of project management structures
• ISO-27852 - Space systems - Estimation of orbit lifetime
• ISO-27875 - Space systems - Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
• ISO-27875-AM1 - - Amendment 1: Formula to obtain Ec by the product of the probability of impact on a specific latitude band, and the population within the band, which is integrated over the latitude range covered by the orbital inclination
• ISO-5879 - Space systems - Ground test for the separation between a launch vehicle and a spacecraft - Requirements for combined separation tests, horizontal separation tests and individual falling separation tests
• ISO-6434 - Space systems - Design, testing and operation of a large constellation of spacecraft
• ISO-6832 - Space systems - Development technology of a thermal vacuum chamber

Other SDOs:

• DIN-EN-13291-3 - Part 3: Materials, Mechanical Parts & Processes, Space Product Assurance, General Requ
• DIN-EN-14165 - Space engineering standards - Fracture control; German version EN 14165:2004
• DIN-EN-14612 - Space product assurance - Verification and approval of automatic machine wave soldering; German version EN 14612:2003
• DIN-EN-14724 - Space Project Management, Tailoring of Space Standards
• DIN-EN-14736 - Space product assurance - Quality assurance for test centres; German version EN 14736:2004
• DIN-EN-14737-1 - Space engineering - Ground systems and operations - Part 1: Principles and requirements; German version EN 14737-1:2004
• DIN-EN-14738 - Space product assurance - Hazard analysis; German version EN 14738:2004
• DIN-EN-ISO-17666 - Space systems - Risk management
• EN-13291-3 - Part 3: Materials, Mechanical Parts & Processes, Space Product Assurance, General Requ
• EN-14091 - Space Product Assurance, Thermal Vacuum Outgassing Test for the Screening of Space Ma
• EN-14092 - Space Engineering, Space Environment
• EN-14093 - Space Project Management, Organization & Conduct of Reviews
• EN-14097 - Space Product Assurance, Nonconformance Control System
• EN-14098 - Space Product Assurance, Thermal Cycling Test for the Screening of Space Materials & P
• EN-14099 - Space Product Assurance, Measurement of the Peel & Pull-Off Strength of Coatings & Fi
• EN-14100 - Space Product Assurance, the Determination of Off Gassing Products From Materials & As
• EN-14101 - Aerospace - Space product assurance - Material selection for controlling stress-corrosion cracking
• EN-14165 - Space Engineering, Fracture Control
• EN-14724 - Space Project Management, Tailoring of Space Standards
• EN-14736 - Space Product Assurance, Quality Assurance for Test Centres
• EN-14737-1 - Part 1: Principles & Requirements, Space Engineering - Ground Systems & Operations
• EN-14738 - Space Product Assurance, Hazard Analysis
• EN-16601-00-01 - Space systems - Glossary of terms
• EN-16601-10 - Space project management - Project planning and implementation
• EN-16601-10-01 - Space project management - Part 10-01: Organization and conduct of reviews
• EN-16601-40 - Space project management - Part 40: Configuration and information management
• EN-16601-60 - Space project management - Part 60: Cost and schedule management
• EN-16601-80 - Space project management - Part 80: Risk management
• EN-16602-10 - Space product assurance - Product assurance management
• EN-16602-10-04 - Space product assurance - Critical-item control
• EN-16602-10-09 - Space product assurance - Nonconformance control system
• EN-16602-20 - Space product assurance - Quality assurance
• EN-16602-20-07 - Space product assurance - Quality and safety assurance for space test centres
• EN-16602-20-08 - Space product assurance - Storage, handling and transportation of spacecraft hardware
• EN-16602-20-10 - Space product assurance - Off-the-shelf items utilization in space systems
• EN-16602-30 - Space product assurance - Dependability
• EN-16602-30-02 - Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA)
• EN-16602-30-09 - Space product assurance - Availability analysis
• EN-16602-30-11 - Space product assurance - Derating - EEE components
• EN-16602-40 - Space product assurance - Safety
• EN-16602-40-02 - Space product assurance - Hazard analysis
• EN-16602-40-12 - Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025
• EN-16602-60 - Space product assurance - Electrical, electronic and electromechanical (EEE) components
• EN-16602-60-02 - Space product assurance - ASIC and FPGA development
• EN-16602-60-05 - Space product assurance - Generic procurement requirements for hybrids
• EN-16602-60-12 - Space product assurance - Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs)
• EN-16602-60-13 - Space product assurance - Requirements for the use of COTS components
• EN-16602-60-14 - Space product assurance - Relifing procedure - EEE components
• EN-16602-60-15 - Space product assurance - Radiation hardness assurance - EEE components
• EN-16602-70 - Space product assurance - Materials, mechanical parts and processes
• EN-16602-70-01 - Space product assurance - Cleanliness and contamination control
• EN-16602-70-02 - Space product assurance - Thermal vacuum outgassing test for the screening of space materials
• EN-16602-70-03 - Space product assurance - Black-anodizing of metals with inorganic dyes
• EN-16602-70-04 - Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies
• EN-16602-70-05 - Space product assurance - Detection of organic contamination surfaces by infrared spectroscopy
• EN-16602-70-06 - Space product assurance - Particle and UV radiation testing for space materials
• EN-16602-70-07 - Space product assurance - Verification and approval of automatic machine wave soldering
• EN-16602-70-08 - Space product assurance - Manual soldering of high-reliability electrical connections
• EN-16602-70-09 - Space product assurance - Measurements of thermo-optical properties of thermal control materials
• EN-16602-70-10 - Space product assurance - Qualification of printed circuit boards
• EN-16602-70-11 - Space product assurance - Procurement of printed circuit boards
• EN-16602-70-12 - Space product assurance - Design rules for printed circuit boards
• EN-16602-70-13 - Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
• EN-16602-70-18 - Space product assurance - Preparation, assembly and mounting of RF coaxial cables
• EN-16602-70-20 - Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to 'red-plague' corrosion
• EN-16602-70-21 - Space product assurance - Flammability testing for the screening of space materials
• EN-16602-70-22 - Space product assurance - Control of limited shelf-life materials
• EN-16602-70-26 - Space product assurance - Crimping of high-reliability electrical connections
• EN-16602-70-28 - Space product assurance - Repair and modification of printed circuit board assemblies for space use
• EN-16602-70-29 - Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
• EN-16602-70-30 - Space product assurance - Wire wrapping of high-reliability electrical connections
• EN-16602-70-31 - Space product assurance - Application of paints and coatings on space hardware
• EN-16602-70-36 - Space product assurance - Material selection for controlling stress-corrosion cracking
• EN-16602-70-37 - Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
• EN-16602-70-38 - Space product assurance - High-reliability soldering for surface-mount and mixed technology
• EN-16602-70-39 - Space product assurance - Welding of metallic materials for flight hardware
• EN-16602-70-45 - Space product assurance - Mechanical testing of metallic materials
• EN-16602-70-46 - Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
• EN-16602-70-50 - Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms
• EN-16602-70-53 - Space product assurance - Materials and hardware compatibility tests for sterilization processes
• EN-16602-70-54 - Space product assurance - Ultracleaning of flight hardware
• EN-16602-70-55 - Space product assurance - Microbiological examination of flight hardware and cleanrooms
• EN-16602-70-56 - Space product assurance - Vapour Phase Bioburden Reduction for Flight Hardware
• EN-16602-70-57 - Space product assurance - Dry Heat Bioburden Reduction for Flight Hardware
• EN-16602-70-58 - Space product assurance - Bioburden control of cleanrooms
• EN-16602-70-60 - Space product assurance - Qualification and Procurement of printed circuit boards
• EN-16602-70-71 - Space product assurance - Materials, processes and their data selection
• EN-16602-80 - Space product assurance - Software product assurance
• EN-16603-10 - Space engineering - System engineering general requirements
• EN-16603-10-02 - Space engineering - Verification
• EN-16603-10-03 - Space engineering - Testing
• EN-16603-10-04 - Space engineering - Space environment
• EN-16603-10-06 - Space engineering - Part 10-06: Technical requirements specification
• EN-16603-10-09 - Space engineering - Reference coordinate system
• EN-16603-10-11 - Space engineering - Human factors engineering
• EN-16603-10-12 - Space engineering - Method for the calculation of radiation received and its effects, and a policy for design margins
• EN-16603-10-24 - Space engineering - Interface management
• EN-16603-20-06 - Space engineering - Spacecraft charging
• EN-16603-20-07 - Space engineering - Electromagnetic compatibility
• EN-16603-20-08 - Space engineering - Part 20-08: Photovoltaic assemblies and components
• EN-16603-20-20 - Space engineering - Electrical design and interface requirements for power supply
• EN-16603-31 - Space engineering - Thermal control general requirements
• EN-16603-31-02 - Space engineering - Two-phase heat transport equipment
• EN-16603-31-04 - Space engineering - Exchange of thermal analysis data
• EN-16603-32 - Space engineering - Structural general requirements
• EN-16603-32-01 - Space engineering - Fracture control
• EN-16603-32-02 - Space engineering - Structural design and verification of pressurized hardware
• EN-16603-32-03 - Space engineering - Structural finite element models
• EN-16603-32-08 - Space engineering - Materials
• EN-16603-32-10 - Space engineering - Structural factors of safety for spaceflight hardware
• EN-16603-32-11 - Space engineering - Modal survey assessment
• EN-16603-33-01 - Space engineering - Mechanisms
• EN-16603-33-11 - Space engineering - Explosive subsystems and devices
• EN-16603-34 - Space engineering - Part 34: Environmental control and life support (ECLS)
• EN-16603-35 - Space engineering - Propulsion general requirements
• EN-16603-35-01 - Space engineering - Liquid and electric propulsion for spacecraft
• EN-16603-35-02 - Space engineering - Solid propulsion for spacecrafts and launchers
• EN-16603-35-03 - Space engineering - Liquid propulsion for launchers
• EN-16603-35-06 - Space engineering - Cleanliness requirements for spacecraft propulsion hardware
• EN-16603-35-10 - Space engineering - Compatibility testing for liquid propulsion components, subsystems and systems
• EN-16603-40 - Space engineering - Part 40: Software
• EN-16603-50 - Space engineering - Communications
• EN-16603-50-01 - Space engineering - Space data links - Telemetry synchronization and channel coding
• EN-16603-50-02 - Space engineering - Ranging and Doppler tracking
• EN-16603-50-03 - Space engineering - Space data links - Telemetry transfer frame protocol
• EN-16603-50-04 - Space engineering - Space data links - Telecommand protocols, synchronization and channel coding
• EN-16603-50-05 - Space engineering - Radio frequency and modulation
• EN-16603-50-13 - Space engineering - Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft
• EN-16603-50-14 - Space engineering - Spacecraft discrete interfaces
• EN-16603-50-15 - Space engineering - CANbus extention protocol
• EN-16603-50-51 - Space engineering - SpaceWire protocol identification
• EN-16603-50-52 - Space engineering - SpaceWire - Remote memory access protocol
• EN-16603-50-53 - Space engineering - SpaceWire - CCSDS packet transfer protocol
• EN-16603-60-10 - Space engineering - Control performances
• EN-16603-60-20 - Space engineering - Star sensor terminology and performance specification
• EN-16603-60-30 - Space engineering - Satellite AOCS requirements
• EN-16603-70 - Space engineering - Ground systems and operations
• EN-16603-70-01 - Space engineering - On-board control procedures
• EN-16603-70-11 - Space engineering - Space segment operability
• EN-16603-70-31 - Space engineering - Ground systems and operations - Monitoring and control data definition
• EN-16603-70-32 - Space engineering - Test and operations procedure language
• EN-16603-70-41 - Space engineering - Telemetry and telecommand packet utilization
• EN-16604-10 - Space sustainability - Adoption Notice of ISO 24113: Space systems - Space debris mitigation requirements
• EN-16803-1 - Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 1: Definitions and system engineering procedures for the establishment and assessment of performances
• EN-9277 - Aerospace series - Programme Management - Guide for the management of Systems Engineering
• SS-EN-13290-1 - Space project management - General requirements - Part 1: Policy and principles
• SS-EN-13290-2 - Space project management - General requirements - Part 2: Project breakdown structure
• SS-EN-13290-3 - Space project management - General requirements - Part 3: Project organization
• SS-EN-13290-4 - Space project management - General requirements - Part 4: Project phasing and planning
• SS-EN-13290-5 - Space project management - General requirements - Part 5: Configuration management
• SS-EN-13290-6 - Space project management - General requirements - Part 6: Information/Documentation management
• SS-EN-13290-7 - Space project management - General requirements - Part 7: Cost and schedule management
• SS-EN-13291-1 - Space project management - General requirements - Part 1: Policy and principles
• SS-EN-13291-2 - Space product assurance - General requirements - Part 2: Quality assurance
• SS-EN-13291-3 - Space product assurance - General requirements - Part 3: Materials, mechanical parts and processes
• SS-EN-13292 - Space project management - General requirements - Part 1: Policy and principles
• SS-EN-13701 - Space systems - Glossary of terms
• SS-EN-14089 - Space product assurance - The control of limited shelf-life materials
• SS-EN-14090 - Space product assurance - Flammability testing for the screening of space materials
• SS-EN-14091 - Space product assurance - Thermal vacuum outgassing test for the screening of space materials
• SS-EN-14092 - Space engineering - Space environment
• SS-EN-14093 - Space project management - Organization and conduct of reviews
• SS-EN-14097 - Space product assurance - Nonconformance control system
• SS-EN-14098 - Space product assurance - Thermal cycling test for the screening of space materials and processes
• SS-EN-14099 - Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
• SS-EN-14100 - Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
• SS-EN-14101 - Space product assurance - Material selection for controlling stress-corrosion cracking
• SS-EN-14160 - Space engineering - Software
• SS-EN-14165 - Space engineering standards - Fracture control
• SS-EN-14514 - Space engineering standards - Functional analysis
• SS-EN-14607-1 - Space engineering - Mechanical - Part 1: Thermal control
• SS-EN-14607-2 - Space engineering - Mechanical - Part 2: Structural
• SS-EN-14607-5-1 - Space engineering - Mechanical - Part 5-1: Liquid and electric propulsion for spacecraft
• SS-EN-14607-6 - Space engineering - Mechanical - Part 6: Pyrotechnics
• SS-EN-14607-7 - Space engineering - Mechanical - Part 7: Mechanical parts
• SS-EN-14607-8 - Space engineering - Mechanical - Part 8: Materials
• SS-EN-14612 - Space product assurance - Verification and approval of automatic machine wave soldering
• SS-EN-14724 - Space project management - Tailoring of space standards
• SS-EN-14725 - Space engineering - Verification
• SS-EN-14736 - Space product assurance - Quality assurance for test centres
• SS-EN-14737-1 - Space engineering - Ground systems and operations - Part 1: Principles and requirements
• SS-EN-14737-2 - Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs)
• SS-EN-14738 - Space product assurance - Hazard analysis
• SS-EN-14776 - Space engineering - Ground systems and operations - Telemetry and telecommand packet utilization
• SS-EN-14777 - Space engineering - Multipaction design and test
• SS-EN-14824 - Space engineering - Testing
• SS-EN-16601-00-01 - Space systems - Glossary of terms
• SS-EN-16601-10 - Space project management - Project planning and implementation
• SS-EN-16601-10-01 - Space project management - Part 10-01: Organization and conduct of reviews
• SS-EN-16601-40 - Space project management - Configuration and information management
• SS-EN-16601-60 - Space project management - Part 60: Cost and schedule management
• SS-EN-16601-80 - Space project management - Part 80: Risk management
• SS-EN-16602-10 - Space product assurance - Product assurance management
• SS-EN-16602-10-04 - Space product assurance - Critical-item control
• SS-EN-16602-10-09 - Space product assurance - Nonconformance control system
• SS-EN-16602-20 - Space product assurance - Quality assurance
• SS-EN-16602-20-07 - Space product assurance - Quality and safety assurance for space test centres
• SS-EN-16602-20-08 - Space product assurance - Storage, handling and transportation of spacecraft hardware
• SS-EN-16602-20-10 - Space product assurance - Off-the-shelf items utilization in space systems
• SS-EN-16602-30 - Space product assurance - Dependability
• SS-EN-16602-30-02 - Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA)
• SS-EN-16602-30-09 - Space product assurance - Availability analysis
• SS-EN-16602-30-11 - Space product assurance - Derating - EEE components
• SS-EN-16602-40 - Space product assurance - Safety
• SS-EN-16602-40-02 - Space product assurance - Hazard analysis
• SS-EN-16602-40-12 - Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025
• SS-EN-16602-60 - Space product assurance - Electrical, electronic and electromechanical (EEE) components
• SS-EN-16602-60-02 - Space product assurance - ASIC and FPGA development
• SS-EN-16602-60-05 - Space product assurance - Generic procurement requirements for hybrids
• SS-EN-16602-60-12 - Space product assurance - Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs)
• SS-EN-16602-60-13 - Space product assurance - Commercial electrical, electronic and electromechanical (EEE) components
• SS-EN-16602-60-14 - Space product assurance - Relifing procedure - EEE components
• SS-EN-16602-60-15 - Space product assurance - Radiation hardness assurance - EEE components
• SS-EN-16602-70 - Space product assurance - Materials, mechanical parts and processes
• SS-EN-16602-70-01 - Space product assurance - Cleanliness and contamination control
• SS-EN-16602-70-02 - Space product assurance - Thermal vacuum outgassing test for the screening of space materials
• SS-EN-16602-70-03 - Space product assurance - Black-anodizing of metals with inorganic dyes
• SS-EN-16602-70-04 - Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies
• SS-EN-16602-70-05 - Space product assurance - Detection of organic contamination surfaces by infrared spectroscopy
• SS-EN-16602-70-06 - Space product assurance - Particle and UV radiation testing for space materials
• SS-EN-16602-70-07 - Space product assurance - Verification and approval of automatic machine wave soldering
• SS-EN-16602-70-08 - Space product assurance - Manual soldering of high-reliability electrical connections
• SS-EN-16602-70-09 - Space product assurance - Measurements of thermo-optical properties of thermal control materials
• SS-EN-16602-70-10 - Space product assurance - Qualification of printed circuit boards
• SS-EN-16602-70-11 - Space product assurance - Procurement of printed circuit boards
• SS-EN-16602-70-12 - Space product assurance - Design rules for printed circuit boards
• SS-EN-16602-70-13 - Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
• SS-EN-16602-70-14 - Space product assurance - Corrosion
• SS-EN-16602-70-15 - Space product assurance - Non-destructive testing
• SS-EN-16602-70-16 - Space engineering - Adhesive bonding for spacecraft and launcher applications
• SS-EN-16602-70-18 - Space product assurance - Preparation, assembly and mounting of RF coaxial cables
• SS-EN-16602-70-20 - Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion
• SS-EN-16602-70-21 - Space product assurance - Flammability testing for the screening of space materials
• SS-EN-16602-70-22 - Space product assurance - Control of limited shelf-life materials
• SS-EN-16602-70-26 - Space product assurance - Crimping of high-reliability electrical connections
• SS-EN-16602-70-28 - Space product assurance - Repair and modification of printed circuit board assemblies for space use
• SS-EN-16602-70-29 - Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
• SS-EN-16602-70-30 - Space product assurance - Wire wrapping of high-reliability electrical connections
• SS-EN-16602-70-31 - Space product assurance - Application of paints and coatings on space hardware
• SS-EN-16602-70-36 - Space product assurance - Material selection for controlling stress-corrosion cracking
• SS-EN-16602-70-37 - Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
• SS-EN-16602-70-38 - Space product assurance - High-reliability soldering for surface-mount and mixed technology
• SS-EN-16602-70-39 - Space product assurance - Welding of metallic materials for flight hardware
• SS-EN-16602-70-40 - Space product assurance - Processing and quality assurance requirements for hard brazing of metallic materials for flight hardware
• SS-EN-16602-70-45 - Space product assurance - Mechanical testing of metallic materials
• SS-EN-16602-70-46 - Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
• SS-EN-16602-70-50 - Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms
• SS-EN-16602-70-53 - Space product assurance - Materials and hardware compatibility tests for sterilization processes
• SS-EN-16602-70-54 - Space product assurance - Ultracleaning of flight hardware
• SS-EN-16602-70-55 - Space product assurance - Microbiological examination of flight hardware and cleanrooms
• SS-EN-16602-70-56 - Space product assurance - Vapour Phase Bioburden Reduction for Flight Hardware
• SS-EN-16602-70-57 - Space product assurance - Dry Heat Bioburden Reduction for Flight Hardware
• SS-EN-16602-70-58 - Space product assurance - Bioburden control of cleanrooms
• SS-EN-16602-70-60 - Space product assurance - Qualification and Procurement of printed circuit boards
• SS-EN-16602-70-61 - Space product assurance - High-reliability soldering for surface mount, mixed technology and hand-mounted electrical connections
• SS-EN-16602-70-71 - Space product assurance - Materials, processes and their data selection
• SS-EN-16602-70-80 - Space product assurance - Processing and quality assurance requirements for metallic powder bed fusion technologies for space applications
• SS-EN-16602-80 - Aerospace series - Space product assurance - Software product assurance
• SS-EN-16603-10 - Space engineering - System engineering general requirements
• SS-EN-16603-10-02 - Space engineering - Verification
• SS-EN-16603-10-03 - Space engineering - Testing
• SS-EN-16603-10-04 - Space engineering - Space environment
• SS-EN-16603-10-06 - Space engineering - Part 10-06: Technical requirements specification
• SS-EN-16603-10-09 - Space engineering - Reference coordinate system
• SS-EN-16603-10-11 - Space engineering - Human factors engineering
• SS-EN-16603-10-12 - Space engineering - Method for the calculation of radiation received and its effects, and a policy for design margins
• SS-EN-16603-10-24 - Space engineering - Interface management
• SS-EN-16603-11 - Space engineering - Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment (ISO 16290:2013, modified)
• SS-EN-16603-20 - Space engineering - Electrical and electronic
• SS-EN-16603-20-01 - Space engineering - Multipactor, design and test
• SS-EN-16603-20-06 - Space engineering - Spacecraft charging
• SS-EN-16603-20-07 - Space engineering - Electromagnetic compatibility
• SS-EN-16603-20-08 - Space engineering - Photovoltaic assemblies and components
• SS-EN-16603-20-20 - Space engineering - Electrical design and interface requirements for power supply
• SS-EN-16603-31 - Space engineering - Thermal control general requirements
• SS-EN-16603-31-02 - Space engineering - Two-phase heat transport equipment
• SS-EN-16603-31-04 - Space engineering - Exchange of thermal analysis data
• SS-EN-16603-32 - Space engineering - Structural general requirements
• SS-EN-16603-32-01 - Space engineering - Fracture control
• SS-EN-16603-32-02 - Space engineering - Structural design and verification of pressurized hardware
• SS-EN-16603-32-03 - Space engineering - Structural finite element models
• SS-EN-16603-32-08 - Space engineering - Materials
• SS-EN-16603-32-10 - Space engineering - Structural factors of safety for spaceflight hardware
• SS-EN-16603-32-11 - Space engineering - Modal survey assessment
• SS-EN-16603-33-01 - Space engineering - Mechanisms
• SS-EN-16603-33-11 - Space engineering - Explosive subsystems and devices
• SS-EN-16603-34 - Space engineering - Part 34: Environmental control and life support (ECLS)
• SS-EN-16603-35 - Space engineering - Propulsion general requirements
• SS-EN-16603-35-01 - Space engineering - Liquid and electric propulsion for spacecraft
• SS-EN-16603-35-02 - Space engineering - Solid propulsion for spacecrafts and launchers
• SS-EN-16603-35-03 - Space engineering - Liquid propulsion for launchers
• SS-EN-16603-35-06 - Space engineering - Cleanliness requirements for spacecraft propulsion hardware
• SS-EN-16603-35-10 - Space engineering - Compatibility testing for liquid propulsion components, subsystems and systems
• SS-EN-16603-40 - Space engineering - Part 40: Software
• SS-EN-16603-50 - Space engineering - Communications
• SS-EN-16603-50-01 - Space engineering - Space data links - Telemetry synchronization and channel coding
• SS-EN-16603-50-02 - Space engineering - Ranging and Doppler tracking
• SS-EN-16603-50-03 - Space engineering - Space data links - Telemetry transfer frame protocol
• SS-EN-16603-50-04 - Space engineering - Space data links - Telecommand protocols, synchronization and channel coding
• SS-EN-16603-50-05 - Space engineering - Radio frequency and modulation
• SS-EN-16603-50-11 - Space engineernig - SpaceFibre - Very high-speed serial link
• SS-EN-16603-50-13 - Space engineering - Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft
• SS-EN-16603-50-14 - Space engineering - Spacecraft discrete interfaces
• SS-EN-16603-50-15 - Space engineering - CANbus extention protocol
• SS-EN-16603-50-16 - Space engineering - Time triggered Ethernet
• SS-EN-16603-50-21 - Space engineering - Adoption Notice of CCSDS 131.0-B-3, TM Synchronization and Channel Coding
• SS-EN-16603-50-22 - Space engineering - Adoption Notice of CCSDS 132.0-B-2, TM Space Data Link Protocol
• SS-EN-16603-50-23 - Space engineering - Adoption Notice of CCSDS 732.0-B-3, AOS Space Data Link Protocol
• SS-EN-16603-50-24 - Space engineering - Adoption Notice of CCSDS 231.0-B-3, TC Synchronization and Channel Coding
• SS-EN-16603-50-25 - Space engineering - Adoption Notice of CCSDS 232.0-B-3, TC Space Data Link Protocol
• SS-EN-16603-50-26 - Space engineering - Adoption Notice of CCSDS 232.1-B-2, Communications Operation Procedure-1
• SS-EN-16603-50-51 - Space engineering - SpaceWire protocol identification
• SS-EN-16603-50-52 - Space engineering - SpaceWire - Remote memory access protocol
• SS-EN-16603-50-53 - Space engineering - SpaceWire - CCSDS packet transfer protocol
• SS-EN-16603-60-10 - Space engineering - Control performances
• SS-EN-16603-60-20 - Space engineering - Star sensor terminology and performance specification
• SS-EN-16603-60-21 - Space engineering - Gyros terminology and performance specification
• SS-EN-16603-60-30 - Space engineering - Satellite AOCS requirements
• SS-EN-16603-70 - Space engineering - Ground systems and operations
• SS-EN-16603-70-01 - Space engineering - On-board control procedures
• SS-EN-16603-70-11 - Space engineering - Space segment operability
• SS-EN-16603-70-31 - Space engineering - Ground systems and operations - Monitoring and control data definition
• SS-EN-16603-70-32 - Space engineering - Test and operations procedure language
• SS-EN-16603-70-41 - Space engineering - Telemetry and telecommand packet utilization
• SS-EN-16604-10 - Space sustainability - Space debris mitigation requirements (ISO 24113:2011, modified)
• SS-EN-16604-20 - Space sustainability - Planetary protection
• SS-EN-16604-30-03 - Space - Space Situational Awareness Monitoring - Part 30-03: Observation System Data Message (OSDM)
• SS-EN-16803-1 - Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 1: Definitions and system engineering procedures for the establishment and assessment of performances
• SS-EN-17350 - SCM - Scheduling and Commanding Message - Standard
• SS-EN-9200 - Aerospace series - Programme management - Guidelines for project management specification
• SS-EN-9277 - Aerospace series - Programme Management - Guide for the management of Systems Engineering
• SS-EN-ISO-14620-1 - Space systems - Safety requirements - Part 1: System safety (ISO 14620-1:2002)
• SS-EN-ISO-16091 - Space systems - Integrated logistic support (ISO 16091:2002)
• SS-EN-ISO-17666 - Space systems - Risk management (ISO 17666:2003)
• SS-EN-ISO-19085-13 - Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020)
• SS-EN-ISO-21351 - Space systems - Functional and technical specifications (ISO 21351:2004)
• SS-ISO-11104 - Space data and information transfer systems - Time code formats (ISO 11104:2003, IDT)
• SS-ISO-12171 - Space data and information transfer systems - Telecommand - Channel service - Architectural specification
• SS-ISO-12172 - Space data and information transfer systems - Telecommand - Data routing service
• SS-ISO-12173 - Space data and information transfer systems - Telecommand - Command operation procedures
• SS-ISO-13419 - Space data and information transfer systems - Packet telemetry
• SS-ISO-13420 - Space data and information transfer systems - Advanced orbiting systems - Network and data links - Architectural specification
• SS-ISO-14300-1 - Space systems - Programme management - Part 1: Structuring of a programme
• SS-ISO-14300-2 - Space systems - Programme management - Part 2: Product assurance
• SS-ISO-14302 - Space systems - Electromagnetic compatibility requirements
• SS-ISO-14619 - Space systems - Space experiments - General requirements
• SS-ISO-14621-1 - Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 1: Parts management
• SS-ISO-14621-2 - Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 2: Control programme requirements
• SS-ISO-14622 - Space systems - Structural design - Loads and induced environment
• SS-ISO-14623 - Space systems - Pressure vessels and pressurized structures - Design and operation (ISO 14623:2003, IDT)
• SS-ISO-14711 - Space systems - Unmanned mission operations concepts - Guidelines for defining and assessing concept products
• SS-ISO-14721 - Space data and information transfer systems - Open archival information system - Reference model (ISO 14721:2012, IDT)
• SS-ISO-14950 - Space systems - Unmanned spacecraft operability (ISO 14950:2004, IDT)
• SS-ISO-14951-9 - Space systems - Fluid characteristics - Part 9: Argon
• SS-ISO-14952-1 - Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary
• SS-ISO-14952-2 - Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness levels
• SS-ISO-14952-3 - Space systems - Surface cleanliness of fluid systems - Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination
• SS-ISO-14952-4 - Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes
• SS-ISO-14952-5 - Space systems - Surface cleanliness of fluid systems - Part 5: Drying processes
• SS-ISO-14952-6 - Space systems - Surface cleanliness of fluid systems - Part 6: Precision-cleaning processes
• SS-ISO-14954 - Space systems - Dynamic and static analysis - Exchange of mathematical models (ISO 14954:2005, IDT)
• SS-ISO-15388 - Space systems - Contamination and cleanliness control (ISO 15388:2004, IDT)
• SS-ISO-15389 - Space systems - Flight-to-ground umbilicals
• SS-ISO-15389-AM1 - Space systems - Flight-to-ground umbilicals - Amendment 1: Prevention of accidental cross-connection (ISO 15389:2001/Amd 1:2005, IDT)
• SS-ISO-15390 - Space environment (natural and artificial) - Galactic cosmic ray model (ISO 15390:2004, IDT)
• SS-ISO-15859-1 - Space systems - Fluid characteristics, sampling and test methods - Part 1: Oxygen (ISO 15859-1:2004, IDT)
• SS-ISO-15859-10 - Space systems - Fluid characteristics, sampling and test methods - Part 10: Water (ISO 15859-10:2004, IDT)
• SS-ISO-15859-11 - Space systems - Fluid characteristics, sampling and test methods - Part 11: Ammonia (ISO 15859-11:2004, IDT)
• SS-ISO-15859-12 - Space systems - Fluid characteristics, sampling and test methods - Part 12: Carbon dioxide (ISO 15859-12:2004, IDT)
• SS-ISO-15859-13 - Space systems - Fluid characteristics, sampling and test methods - Part 13: Breathing air (ISO 15859-13:2004, IDT)
• SS-ISO-15859-2 - Space systems - Fluid characteristics, sampling and test methods - Part 2: Hydrogen (ISO 15859-2:2004, IDT)
• SS-ISO-15859-3 - Space systems - Fluid characteristics, sampling and test methods - Part 3: Nitrogen (ISO 15859-3:2004, IDT)
• SS-ISO-15859-4 - Space systems - Fluid characteristics, sampling and test methods - Part 4: Helium (ISO 15859-4:2004, IDT)
• SS-ISO-15859-5 - Space systems - Fluid characteristics, sampling and test methods - Part 5: Nitrogen textroxide propellants (ISO 15859-5:2004, IDT)
• SS-ISO-15859-6 - Space systems - Fluid characteristics, sampling and test methods - Part 6: Monomethylhydrazine propellant (ISO 15859-6:2004, IDT)
• SS-ISO-15859-7 - Space systems - Fluid characteristics, sampling and test methods - Part 7: Hydrazine propellant (ISO 15859-7:2004, IDT)
• SS-ISO-15859-8 - Space systems - Fluid characteristics, sampling and test methods - Part 8: Kerosine propellant (ISO 15859-8:2004, IDT)
• SS-ISO-15859-9 - Space systems - Fluid characteristics, sampling and test methods - Part 9: Argon (ISO 15859-9:2004, IDT)
• SS-ISO-15864 - Space systems - General test methods for space craft, subsystems and units (ISO 15864:2004, IDT)
• SS-ISO-15888 - Space data and information transfer systems - Standard formatted data units - Referencing environment
• SS-ISO-15894 - Space data and information transfer systems - Protocol specification for space communications - File protocol
• SS-ISO-16458 - Space systems - Unmanned spacecraft transportation - General requirements (ISO 16458:2004, IDT)
• SS-ISO-17355 - Space data and information transfer systems - CCSDS file delivery protocol (ISO 17355:2004, IDT)
• SS-ISO-17399 - Space systems - Man-systems integration (ISO 17399:2003, IDT)
• SS-ISO-17401 - Space systems - Spacecraft interface requirements document for launch vehicle services (ISO 17401:2004, IDT)
• SS-ISO-17433 - Space data and information transfer systems - Packet telemetry services
• SS-ISO-21347 - Space systems - Fracture and damage control (ISO 21347:2005, IDT)
• SS-ISO-21962 - Space data and information transfer systems - Data entity dictionary specification languages (DEDSL) - PVL syntax
• SS-ISO-22641 - Space data and information transfer systems - TM (telemetry) synchronization and channel coding (ISO 22641-2005, IDT)
• SS-ISO-22642 - Space data and inforrmation transfer systems - TC (telecommand) synchronization and channel coding (ISO 22642:2005, IDT)
• SS-ISO-22645 - Space data and information transfer systems - TM (telemetry) space data link protocol (ISO 22645:2005, IDT)
• SS-ISO-22646 - Space data and information transfer systems - Space packet protocol (ISO 22646:2005, IDT)
• SS-ISO-22664 - Space data and information transfer systems - TC (telecommand) space data link protocol (ISO 22664:2005, IDT)
• SS-ISO-22666 - Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol (ISO 22666:2005, IDT)
• SS-ISO-22667 - Space data and information transfer systems - Communication operations Procedure-1 (ISO 22667:2005, IDT)
• SS-ISO-22669 - Space data and information transfer systems - Space link extension (SLE) - Return-all-frames service (ISO 22669:2003, IDT)
• SS-ISO-22671 - Space data and information transfer systems - Space link extension (SLE) - Forward command link transmission unit (CLTU) (ISO 22671:2005, IDT)