Document Center List of Standards on Components For Aerospace Construction Tyres For Aircraft, See 83.160.20
ICS Code 49.035
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-E2580 - Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM-E2582 - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
- ASTM-E2660 - Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
- ASTM-E2662 - Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM-E2669 - Standard Digital Reference Images for Titanium Castings
- ASTM-F2156 - Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
- ASTM-F2563 - Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
- ASTM-F311 - Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
- ASTM-F331 - Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
- ASTM-F3361 - Standard Guide for Classifying Alterations for In-Service Aircraft under FAA Authority Oversight
- ASTM-F733 - Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
- ASTM-F801 - Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
BSI:
- BS-2B-30 - Copper-Beryllium Alloy Strip, Foil & Parts (Solution Treated, Cold Rolled: Half Hard &
- BS-2F-67 - Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes
- BS-2L-503 - Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
- BS-2M-45-2 - Aircraft tyres and rims. Methods of test for tyres
- BS-2M-46 - Specification for outside diameters and thicknesses of tubing
- BS-2M-47 - Specification for retreading of cross ply tyres for aircraft
- BS-2SP-101-104 - Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads),* cadmium plated, for aircraft
- BS-2SP-105 - Specification for swaged cable-end assemblies (Unified threads) for preformed steel wire rope (W.9) for aircraft
- BS-2SP-106 - Specification for swaged cable-end assemblies (Unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft
- BS-2SP-168-169 - Specification for Ferrules & Assembly Wires for Braided Rubber Cord Assemblies for Aer
- BS-2SP-170-171 - Specification for Braided Rubber Cord Assemblies for Aerospace Use
- BS-2SP-73-&-74 - Specifications for Ferrules and Assembly Wires for Braided Rubber Cord Assemblies For
- BS-2SP-91-92 - Specification for carbon steel worm drive clamps for aircraft
- BS-2SP-93 - Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use
- BS-2SP-95 - Specification for elastomeric grommets (polychloroprene) for aerospace use
- BS-2SP-96 - Specification for internal retaining rings (imperial sizes)
- BS-2T-57 - Specification for 4/1 nickel-chromium steel tube (1150 N/mm
- BS-2T-66 - Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
- BS-2T-68 - Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
- BS-2W-11 - Specification for aircraft material. Preformed corrosion-resisting steel wire rope
- BS-2W-12 - Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
- BS-2W-9 - Specification for aircraft material. Preformed galvanized carbon steel wire rope
- BS-3F-63 - Specification for low pressure oxygen hose for aeronautical purposes
- BS-3M-45-1 - Aircraft tyres and rims. Specifications
- BS-3M-45-2 - Aircraft tyres and rims
- BS-3SP-168-169 - Ferrules and assembly wires for braided rubber cord assemblies for aerospace use
- BS-3SP-170-171 - Braided rubber cord assemblies for aerospace use
- BS-3T-53 - Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
- BS-3T-60 - Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
- BS-4K-6 - Specification for aircraft material. Cast iron piston ring pots (sand cast and chill cast)
- BS-4M-45-1 - Aircraft tyres and rims. Specifications
- BS-4T-45 - Specification for carbon manganese steel tube (700 MPa) (Tube 12.5 mm outside diameter and greater) (Weldable)
- BS-5T-100 - Aerospace series. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
- BS-5T-2 - Specification for 4/1 nickel-chromium steel tube (1300 N/mm
- BS-6W-8 - Tie rods (swaged) (No. 4 B.A. to $9H inch B.S.F. inclusive) for aircraft purposes
- BS-EN-2130 - Aerospace series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification
- BS-EN-2335 - Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads
- BS-EN-2336 - Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads
- BS-EN-2337 - Aerospace series. Spherical plain bearings. Technical specification
- BS-EN-2379 - Aerospace series. Fluids for assessment of non-metallic materials
- BS-EN-2424 - Aerospace series. Marking of aerospace products
- BS-EN-2584 - Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated load at ambient temperature. Dimensions and loads
- BS-EN-2585 - Aerospace series. Bearing, spherical plain in corrosion resisting steel with self-lubricating liner. Wide series. Elevated load at ambient temperature. Dimensions and loads
- BS-EN-2591-6404 - Elements of electrical and optical connection. Test methods
- BS-EN-2591-6414 - Elements of electrical and optical connection. Test methods
- BS-EN-2755 - Aerospace series. Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
- BS-EN-3048 - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated load at ambient temperature. Dimensions and loads
- BS-EN-3059 - Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated. Dimensions and loads
- BS-EN-3060 - Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated. Dimensions and loads
- BS-EN-3061 - Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing. Dimensions and loads
- BS-EN-3182 - Aerospace series. Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys. Dimensions and loads
- BS-EN-3280 - Aerospace series. Bearings, airframe rolling, rigid or self-aligning. Technical specification
- BS-EN-3727 - Aerospace series. Bearings, airframe rolling rigid with flanged alignment housing. Technical specification
- BS-EN-3848 - Aerospace series. Semi-finished metallic products. Methods of measuring form deviations
- BS-EN-3908 - Aerospace series. Nipples, lubricating, axial type, in corrosion resisting steel, passivated
- BS-EN-4033 - Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9, reduced internal radial clearance. Dimensions and loads
- BS-EN-4034 - Aerospace series. Bearings, airframe rolling. Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
- BS-EN-4035 - Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads
- BS-EN-4036 - Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
- BS-EN-4040 - Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring. Elevated loads at ambient temperature. Dimensions and loads
- BS-EN-4041 - Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads
- BS-EN-4156 - Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series
- BS-EN-4157 - Aerospace series. Rod end, with self-aligning double row ball bearing and threaded shank in steel. Dimensions and loads, Inch series
- BS-EN-4198 - Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads
- BS-EN-4265 - Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions and loads. Inch series
- BS-EN-4266 - Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series
- BS-EN-4424 - Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads
- BS-EN-4534-2 - Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load
- BS-EN-4535-2 - Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load
- BS-EN-4535-2-TC - Tracked Changes. Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load
- BS-EN-4536-2 - Aerospace series. Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated load
- BS-EN-4537-2 - Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load. Dimensions and loads. Inch series
- BS-EN-4538-2 - Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads
- BS-EN-4539-2 - Aerospace series. Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner. Elevated load under low oscillations. Wide series. Dimensions and loads
- BS-EN-4540 - Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification
- BS-EN-4613 - Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series
- BS-EN-4614 - Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
- BS-EN-4614-TC - Tracked Changes. Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
- BS-EN-4662 - Aerospace series. Test specification for vibration control components
- BS-EN-4677-001 - Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding
- BS-EN-4691-1 - Aerospace series. Tie rod with integrated bolts
- BS-EN-4691-2 - Aerospace series. Tie rod with integrated bolts
- BS-EN-4692 - Aerospace series. Tie Rod with integrated bolts. Locking clip
- BS-EN-4693 - Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C
- BS-EN-4694 - Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F
- BS-EN-4695 - Aerospace series. Tie Rod with integrated bolts. Assembly Code G, H and K
- BS-EN-4702-02 - Aerospace series. Quick release fastening systems for non-structural and lining applications
- BS-EN-4702-03 - Aerospace series. Quick release fastening systems for non-structural and lining applications
- BS-EN-4702-04 - Aerospace series. Quick release fastening systems for non-structural and lining applications
- BS-EN-4702-05 - Aerospace series. Quick release fastening systems for non-structural and lining applications
- BS-EN-4708-201 - Aerospace series. Sleeves, heat-shrinkable, for binding, insulation and identification
- BS-EN-4708-203 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
- BS-EN-4710-01 - Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-01-TC - Tracked Changes. Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-02 - Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-03 - Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-03-TC - Tracked Changes. Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-04 - Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-05 - Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-06 - Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4710-07 - Aerospace series. Quick release fastening systems for non-structural applications
- BS-EN-4817 - Aerospace series. Passive UHF RFID tags intended for aircraft use
- BS-EN-4818 - Aerospace series. Passive HF RFID tags intended for aircraft use
- BS-EN-4819 - Aerospace series. Contact Memory Button (CMB) tags intended for aircraft use
- BS-EN-4832 - Aerospace series. Adaptor, Pipe coupling 24 Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting and Ring-locked fitting-reducer. Inch Series. Technical specification
- BS-EN-4841-1 - Aerospace series. Shock mount with bushes
- BS-EN-4841-2 - Aerospace series. Shock mount with bushes
- BS-EN-4854-1 - Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series
- BS-EN-4854-2 - Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series
- BS-EN-4854-3 - Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions
- BS-EN-4880 - Aerospace series. General technical specification for standard parts
- BS-EN-4905-TC - Tracked Changes. Aerospace series. Passive UHF RFID for airborne use
- BS-EN-4906 - Aerospace series. Embedded tags. Choice of fixation for installation, removal and replacement of embedded tags
- BS-EN-6029 - Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel. Dimensions and loads. Inch series
- BS-EN-6046 - Aerospace series. Bearing, spherical, plain, in corrosion resisting steel. Narrow series. Dimensions and loads. Inch series
- BS-EN-6055 - Aerospace series. Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank. Dimensions and loads. Inch series
- BS-EN-6056 - Aerospace series. Rod-end with bearing per EN 4614 with self lubricating liner in corrosion resisting steel with external threaded shank. Dimensions and loads. Inch series
- BS-EN-6057 - Aerospace series. Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank. Dimensions and loads, Inch series
- BS-EN-6075 - Aerospace series. Static seal elements O-Ring ethylene- propylene, moulded, phosphate ester resistant (- 55 C to 107 C). Inch series
- BS-EN-6076 - Aerospace series. Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 C to 107 C). Inch series
- BS-EN-6097 - Aerospace series. Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
- BS-EN-6098 - Aerospace series. Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank. Dimensions and loads. Inch series
- BS-EN-6099 - Aerospace series. Rod-end, spherical, plain bearing, metal to metal. Technical specification
- BS-EN-6133 - Aerospace series. Rod-end, with bearing per EN 6096, with self-lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank. Dimensions and loads. Inch series
- BS-HC-402 - Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter)
- BS-HC-403 - Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter)
- BS-HC-404 - Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)
- BS-ISO-10955 - End-fittings and turnbarrels for aircraft control wire rope. Technical specification
- BS-ISO-2020-2 - Aerospace. Preformed flexible steel wire rope for aircraft controls
- BS-ISO-3324-1 - Aircraft tyres and rims
- BS-ISO-3324-2 - Aircraft tyres and rims
- BS-ISO-9736 - Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads
- BS-ISO-9737 - Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads
- BS-ISO-9738 - Turnbarrels, for aircraft control wire rope. Dimensions and loads
- BS-ISO-9747 - Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
- BS-ISO-9748 - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
- BS-ISO-9757 - Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads
- BS-ISO-9758 - Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads
- BS-ISO-9759 - Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
- BS-ISO-9760 - Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads
- BS-ISO-9761 - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles. Dimensions
- BS-ISO-9762 - Aircraft control wire rope assemblies. Dimensions and end-fitting combinations
- BS-M-48 - Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series
- BS-SP-115-TO-117 - Specifications for hydraulic surface-check type lubricating nipples for aircraft
- BS-SP-119-&-SP-120 - High tensile steel fork joints (Unified threads). For aircraft
- BS-SP-121 - Collars for shear pins for aircraft
- BS-SP-144-147 - Specification for corrosion resisting worm drive clamps for aircraft
- BS-SP-166 - Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series)
- BS-SP-21 - Specification for lubricating nipples for aircraft purposes
- BS-SP-33-39 - Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft
- BS-SP-49-&-50 - Specifications for Ball ends for swaging on cable. For aircraft (Suitable for 5 cwt. cable)
- BS-SP-51-&-52 - Specifications for identification tags for swaged cable-end assemblies. For aircraft
- BS-SP-53 - Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed steel wire rope for aircraft (suitable for use with British Standard W.9 wire rope)
- BS-SP-54 - Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed non-corrodible steel wire rope for aircraft (suitable for use with British Standard W.11 wire rope)
- BS-SP-72 - Braided Rubber Cord Assemblies for Aircraft
- BS-T-64 - Specification for carbon-manganese steel tube (550 N/mm
- BS-T-67 - Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm
- BS-T-69 - Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm
- BS-T-74 - Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel tube (500 N/mm
- BS-T-75 - Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel tube (500 N/mm
- BS-T-76 - Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
- BS-T-77 - Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
- BS-T-78 - Specification for 2 % nickel-chromium-molybdenum steel tubes (1390Mpa)
- BS-T-79 - Specification for 2 % nickel-chromium-molybdenum steel tubes (1160 MPa)
- BS-T-80 - Specification for 12 % chromium corrosion-resisting steel tubes (770 MPa)
- BS-W-13 - Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths)
- BS-W-14 - Aircraft control wire rope assemblies. Technical specification
- PD-CEN-17603-32-24 - Space engineering. Buckling of structures
- PD-CEN-17603-32-25 - Space engineering. Mechanical shock design and verification handbook
- PD-CEN-17603-32-26 - Space engineering. Spacecraft mechanical loads analysis handbook
ISO:
- ISO-1002 - Rolling bearings - Airframe bearings - Characteristics, boundary dimensions, tolerances, static load ratings
- ISO-10792-1 - Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series
- ISO-10792-2 - Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series
- ISO-10792-3 - Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification
- ISO-10955 - Aerospace -- End-fittings and turnbarrels for aircraft control wire rope -- Technical specification
- ISO-13411 - Aerospace - Airframe needle roller, cylindrical roller and track roller bearings - Technical specification
- ISO-13412 - Aerospace - Airframe needle track roller, yoke type, single-row, sealed - Inch series
- ISO-13413 - Aerospace - Airframe needle track roller, yoke type, double-row, sealed - Inch series
- ISO-13414 - Aerospace - Airframe needle roller bearings, single-row, shielded - Inch series
- ISO-13415 - Aerospace - Airframe needle track roller, stud type, single-row, sealed - Inch series
- ISO-13416 - Aerospace - Airframe needle track roller, yoke type, single-row, sealed - Metric series
- ISO-13417 - Aerospace - Airframe needle track roller, stud type, single-row, sealed - Metric series
- ISO-14190 - Aerospace - Airframe rolling bearings: ball and spherical roller bearings - Technical specification
- ISO-14191 - Aerospace - Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 - Metric series
- ISO-14192 - Aerospace - Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty - Metric series
- ISO-14193 - Aerospace - Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty - Inch series
- ISO-14194 - Aerospace - Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty - Inch series
- ISO-14195 - Aerospace - Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty - Inch series
- ISO-14196 - Aerospace - Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty - Inch series
- ISO-14197 - Aerospace - Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty - Inch series
- ISO-14201 - Aerospace - Airframe ball bearings, double-row, self-aligning, diameter series 2 - Metric series
- ISO-14202 - Aerospace - Airframe ball bearings, single-row, rigid, diameter series 0 and 2 - Metric series
- ISO-14203 - Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 - Metric series
- ISO-14204 - Aerospace - Airframe ball bearings, double-row, rigid, diameter series 0 - Metric series
- ISO-14206 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series
- ISO-14207 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light duty - Inch series
- ISO-14208 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty - Inch series
- ISO-14209 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series
- ISO-14210 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty - Inch series
- ISO-14211 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty - Inch series
- ISO-14212 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty - Inch series
- ISO-14213 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty - Inch series
- ISO-14214 - Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series
- ISO-14215 - Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty - Inch series
- ISO-14216 - Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series
- ISO-14217 - Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series
- ISO-14218 - Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series
- ISO-14219 - Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series
- ISO-14220 - Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series
- ISO-14221 - Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series
- ISO-1971 - Aircraft - Accessory drives and mounting pads
- ISO-2020-1 - Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 1: Dimensions and loads
- ISO-2020-2 - Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 2: Technical specification
- ISO-413 - Aircraft - Heads of lubricating nipples
- ISO-7938 - Aircraft - Ball bearings for control cable pulleys - Dimensions and loads
- ISO-7939 - Aircraft - Non-metallic pulleys with ball bearings for control cables - Dimensions and loads
- ISO-8399-1 - Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 1: Design criteria
- ISO-8399-2 - Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 2: Dimensions
- ISO-9736 - Aerospace -- Eye-ends, in steel, threaded, for aircraft control wire rope -- Dimensions and loads
- ISO-9737 - Aerospace -- Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
- ISO-9738 - Aerospace -- Turnbarrels, for aircraft control wire rope -- Dimensions and loads
- ISO-9747 - Aerospace -- Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
- ISO-9748 - Aerospace -- Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
- ISO-9749 - Aerospace -- Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
- ISO-9757 - Aerospace -- Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels -- Dimensions and loads
- ISO-9758 - Aerospace -- Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope -- Dimensions and loads
- ISO-9759 - Aerospace -- Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
- ISO-9760 - Aerospace -- Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings -- Dimensions and loads
- ISO-9761 - Aerospace -- Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -- Dimensions
- ISO-9762 - Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations
- ISO-9763 - Aerospace -- Aircraft control wire rope assemblies -- Technical specification
- ISO/ASTM-52967 - Additive manufacturing for aerospace - General principles - Part classifications for additive manufactured parts used in aviation
Other SDOs:
- EN-2311 - Aerospace series - Bushes with self-lubricating liner - Technical specification
- EN-2335 - Aerospace Series, Bearings, Spherical Plain in Corrosion Resisting Steel Without Assem
- EN-2379 - Aerospace series - Fluids for assessment of non-metallic materials
- EN-2424 - Aerospace Series - Marking of Aerospace Products
- EN-2754 - Aerospace Series - Nuts, Anchor, Self Locking, Two Lug, Floating With Counterbore - Cl
- EN-2755 - Aerospace Series, Bearings, Spherical Plain in Corrosion Resisting Steel With Self-Lub
- EN-3059 - Aerospace Series, Bearings, Airframe Rolling, Rigid Single Row Ball Bearings in Steel
- EN-3060 - Aerospace Series, Bearings, Airframe Rolling, Rigid Single Row Ball Bearings in Steel,
- EN-3061 - Aerospace Series, Bearings, Airframe Rolling, Rigid Single Row Ball Bearings in Corros
- EN-3182 - Aerospace series - Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys - Dimensions and loads
- EN-3280 - Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification
- EN-3727 - Aerospace Series - Bearings, Airframe Rolling Rigid With Flanged Alignment Housing - T
- EN-3848 - Aerospace Series, Semi-Finished Metallic Products, Methods of Measuring Form Deviation
- EN-3908 - Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated
- EN-4033 - Aerospace Series - Bearings, Airframe Rolling - Rigid Single Row Ball Bearings in Corr
- EN-4034 - Aerospace Series, Bearings, Airframe Rolling, Double Row Self-Aligning Ball Bearings W
- EN-4036 - Aerospace Series - Rod Ends, Adjustable With Self-Aligning Double Row Ball Bearing & T
- EN-4040 - Aerospace Series, Bearings, Spherical Plain in Corrosion Resisting Steel With Self-Lub
- EN-4156 - Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series
- EN-4265 - Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
- EN-4266 - Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series
- EN-4424 - Aerospace Series - Rod-Ends, Adjustable, Single Fork & Threaded Shank With Engagement:
- EN-4534-2 - Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
- EN-4535-2 - Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
- EN-4536-2 - Part 2: Dimensions & Loads - Inch Series, Aerospace Series - Bushes, Plain in Corrosio
- EN-4537-2 - Part 2: Dimensions & Loads - Inch Series, Aerospace Series - Bushes, Flanged in Corros
- EN-4538-2 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 2: Inch series
- EN-4540 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Technical specification
- EN-4613 - Aerospace Series - Spherical Plain Bearings in Corrosion Resisting Steel With Self-Lub
- EN-4614 - Aerospace Series - Spherical Plain Bearings in Corrosion Resisting Steel With Self-Lub
- EN-4662 - Aerospace Series - Test Specification for Vibration Control Components
- EN-4691-1 - Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
- EN-4691-2 - Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit
- EN-4692 - Aerospace series - Tie Rod with integrated bolts -Locking clip
- EN-4693 - Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C
- EN-4694 - Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F
- EN-4695 - Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K
- EN-4702-02 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination
- EN-4702-03 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking
- EN-4702-04 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp
- EN-4702-05 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
- EN-4710-01 - Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification
- EN-4710-02 - Aerospace series - Quick release fastening systems for non-structural applications - Part 02: Spring clamp stud combination
- EN-4710-03 - Aerospace series - Quick release fastening systems for non-structural applications - Part 03: Spring clamp
- EN-4710-04 - Aerospace series - Quick release fastening systems for non-structural applications - Part 04: Spring clamp - One way tolerance compensation
- EN-4710-05 - Aerospace series - Quick release fastening systems for non-structural applications - Part 05: Spring clamp - Two ways tolerance compensation
- EN-4710-06 - Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking
- EN-4710-07 - Aerospace series - Quick release fastening systems for non-structural applications - Part 07: Retaining grommet
- EN-4817 - Aerospace series - Passive UHF RFID tags intended for aircraft use
- EN-4818 - Aerospace series - Passive HF RFID tags intended for aircraft use
- EN-4819 - Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use
- EN-6029 - Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series
- EN-6055 - Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank - Dimensions and loads - Inch series
- EN-6056 - Aerospace series - Rod-end with bearing per EN 4614 with self lubricating liner in corrosion resisting steel with external threaded shank - Dimensions and loads - Inch series
- EN-6075 - Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 DegC to 107 DegC) - Inch series
- EN-6076 - Aerospace series - Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 DegC to 107 DegC) - Inch series
- EN-6096 - Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
- EN-6097 - Aerospace series - Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
- EN-6098 - Aerospace series - Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series
- EN-6133 - Aerospace series - Rod-end, with bearing per EN 6096, with self-lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series
- SS-EN-2022 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
- SS-EN-2023 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Normal series - Dimensions and loads
- SS-EN-2063 - Aerospace series - Airframe rolling bearings - Technical specification
- SS-EN-2064 - Aerospace series - Bearings spherical plain in corrosion resisting steel with self lubricating liner - Technical specification
- SS-EN-2067 - Aerospace series - Rod ends with self-aligning ball bearings - Technical specification
- SS-EN-2068 - Aerospace series - Rod ends with self-lubricating self-aligning bearings - Technical specification
- SS-EN-2130 - Aerospace series - Bearings, precision ball in corrrosion resisting steel for instrument and equipment - Technical specification
- SS-EN-2257 - Aerospace series - Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm equal to or less than D equal to or less than 100 mm - Thickness 1 mmequal to or less than a equal to or less than 6 mm - Dimensions
- SS-EN-2285 - Aerospace series - Bushes, plain, aluminium alloy, with self-lubricating liner - Dimensions and loads
- SS-EN-2286 - Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
- SS-EN-2287 - Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
- SS-EN-2288 - Aerospace series - Bush, flanged, corrosion resisting steel, with self-lubricating liner - Dimensions and loads
- SS-EN-2290-1 - Aerospace series - Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads
- SS-EN-2311 - Aerospace series - Bushes with self-lubricating liner - Technical specification
- SS-EN-2335 - Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads
- SS-EN-2336 - Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads
- SS-EN-2337 - Aerospace series - Spherical plain bearings - Technical specification
- SS-EN-2346-005 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
- SS-EN-2348 - Aerospace series - Control cable assemblies - Technical specification
- SS-EN-2353 - Aerospace series - Turnbarrels, control cable in corrosion resisting steel - Dimensions and loads
- SS-EN-2354 - Aerospace series - Eye-ends, threaded, control cable in corrosion resisting steel - Dimensions and loads
- SS-EN-2355 - Aerospace series - Fork-ends, threaded, control cable in corrosion resisting steel - Dimensions andloads
- SS-EN-2356 - Areospace series - Fork-ends, threaded, control cable for rolling bearings in corrosion resisting steel - Dimensions and loads
- SS-EN-2357 - Aerospace series - Stud-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads
- SS-EN-2358 - Aerospace series - Eye-ends in corrosion resisting steel swaged on type, control cable - Dimensionsand loads
- SS-EN-2359 - Aerospace series - Fork-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads
- SS-EN-2360 - Aerospace series - Fork-ends for rolling bearingsin corrosion resisting steel swaged on type, control cable - Dimensions and loads
- SS-EN-2361 - Aerospace series - Ball-ends, double shank in corrosion resisting steel swaged on type, control cable - Dimensions and loads
- SS-EN-2362 - Aerospace series - Ball-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads
- SS-EN-2379 - Aerospace series - Fluids for assessment of non-metallic materials
- SS-EN-2424 - Aerospace series - Marking of aerospace products
- SS-EN-2501 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
- SS-EN-2569 - Aerospace series - Control cable fittings and turnbarrels - Technical specification
- SS-EN-2584 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
- SS-EN-2585 - Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
- SS-EN-2588 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
- SS-EN-2601 - Aerospace series - Fork ends, adjustable - Technical specification
- SS-EN-2609 - Aerospace series - Control cable assemblies - Combinations and dimensions
- SS-EN-2641 - Aerospace series - Control cable assemblies - Combinations and dimensions
- SS-EN-2644 - Aerospace series - Rod assemblies for flight controls - Technical specification
- SS-EN-2648 - Aerospace series - Washers, concave, in alloy steel, cadmium plated
- SS-EN-2755 - Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification
- SS-EN-3045 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
- SS-EN-3046 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Reduced clearancecategory - Dimensions and loads
- SS-EN-3047 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
- SS-EN-3048 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
- SS-EN-3053 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel -Dimensions and loads
- SS-EN-3054 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads
- SS-EN-3055 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads
- SS-EN-3056 - Arospace series - Bearings, airframe rolling - Rigid double row ball bearings in steel - Dimensionsand loads
- SS-EN-3057 - Aerospace series - Bearings, airframe rolling - Rigid double row ball bearings in steel, cadmium plated - Dimensions and loads
- SS-EN-3058 - Aerospace series - Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads
- SS-EN-3059 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, with flanged alignment housing, cadmium plated - Dimensions and loads
- SS-EN-3060 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads
- SS-EN-3061 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment bush - Dimensions and loads
- SS-EN-3182 - Aerospace series - Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys - Dimensions and loads
- SS-EN-3280 - Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification
- SS-EN-3281 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9 - Dimensions and loads
- SS-EN-3282 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9 - Dimensions and loads
- SS-EN-3283 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9 - Dimensions and loads
- SS-EN-3284 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
- SS-EN-3285 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
- SS-EN-3286 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
- SS-EN-3287 - Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2 - Dimensions and loads
- SS-EN-3288 - Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2 - Dimensions and loads
- SS-EN-3289 - Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosionresisting steel - Diameter series 2 - Dimensions and loads
- SS-EN-3290 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel -Diameter series 3 and 4 - Dimensions and loads
- SS-EN-3291 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4 - Dimensions and loads
- SS-EN-3292 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4 - Dimensions and loads
- SS-EN-3541 - Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads
- SS-EN-3727 - Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification
- SS-EN-3848 - Aerospace series - Semi-finished metallic products - Methods of measuring form deviations
- SS-EN-3908 - Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated
- SS-EN-4033 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads
- SS-EN-4034 - Aerospace series - Bearings, airframe rolling - Double row self-sligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
- SS-EN-4035 - Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
- SS-EN-4036 - Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
- SS-EN-4040 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads
- SS-EN-4041 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush - Dimensions and loads
- SS-EN-4156 - Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series
- SS-EN-4198 - Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads
- SS-EN-4265 - Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
- SS-EN-4266 - Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series
- SS-EN-4424 - Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys - Dimensions and loads
- SS-EN-4534-2 - Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
- SS-EN-4535-2 - Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
- SS-EN-4536-2 - Aerospace series - Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
- SS-EN-4537-2 - Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
- SS-EN-4538-003 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient
- SS-EN-4538-2 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 2: Inch series
- SS-EN-4539-003 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient
- SS-EN-4539-2 - Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series
- SS-EN-4540 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Technical specification
- SS-EN-4570 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Forgings - De ≤ 100 mm
- SS-EN-4613 - Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series
- SS-EN-4614 - Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
- SS-EN-4635 - Aerospace series - Screws, 100 degrees countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) / 650 degrees Celsius
- SS-EN-4662 - Aerospace series - Test specification for vibration control components
- SS-EN-4677-001 - Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies
- SS-EN-4691-1 - Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
- SS-EN-4691-2 - Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit
- SS-EN-4692 - Aerospace series - Tie Rod with integrated bolts -Locking clip
- SS-EN-4693 - Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C
- SS-EN-4694 - Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F
- SS-EN-4695 - Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K
- SS-EN-4702-02 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination
- SS-EN-4702-03 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking
- SS-EN-4702-04 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp
- SS-EN-4702-05 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
- SS-EN-4708-201 - Aerospace series - Sleeves, heat-shrinkable, for binding, insulation and identification - Part 201: Polyolefin identification sleeves - Operating Temperature range -55 °C to 135 °C - Product standard
- SS-EN-4708-203 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 203: polyvinylidene fluoride (PVDF) Identification sleeves - Operating Temperature range -55ºC to 225ºC - Product Standard
- SS-EN-4710-01 - Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification
- SS-EN-4710-02 - Aerospace series - Quick release fastening systems for non-structural applications - Part 02: Spring clamp stud combination
- SS-EN-4710-03 - Aerospace series - Quick release fastening systems for non-structural applications - Part 03: Spring clamp
- SS-EN-4710-04 - Aerospace series - Quick release fastening systems for non-structural applications - Part 04: Spring clamp - One way tolerance compensation
- SS-EN-4710-05 - Aerospace series - Quick release fastening systems for non-structural applications - Part 05: Spring clamp - Two ways tolerance compensation
- SS-EN-4710-06 - Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking
- SS-EN-4710-07 - Aerospace series - Quick release fastening systems for non-structural applications - Part 07: Retaining grommet
- SS-EN-4817 - Aerospace series - Passive UHF RFID tags intended for aircraft use
- SS-EN-4818 - Aerospace series - Passive HF RFID tags intended for aircraft use
- SS-EN-4819 - Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use
- SS-EN-4841-1 - Aerospace series - Shock mount with bushes - Part 1: Technical specification
- SS-EN-4841-2 - Aerospace series - Shock mount with bushes - Part 2: Technical overview
- SS-EN-4854-1 - Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series - Part 1: Dimensions and loads for narrow series
- SS-EN-4854-2 - Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series - Part 2: Dimensions and loads
- SS-EN-4854-3 - Aerospace series Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions Part 3: Technical specification
- SS-EN-4880 - Aerospace series - General technical specification for standard parts
- SS-EN-4905 - Aerospace series - Passive UHF RFID for airborne use
- SS-EN-4906 - Aerospace series - Embedded tags - Choice of fixation for installation, removal and replacement of embedded tags
- SS-EN-6029 - Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series
- SS-EN-6046 - Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series
- SS-EN-6055 - Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank - Dimensions and loads - Inch series
- SS-EN-6056 - Aerospace series - Rod-end with bearing per EN 4614 with self lubricating liner in corrosion resisting steel with external threaded shank - Dimensions and loads - Inch series
- SS-EN-6057 - Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank - Dimensions and loads, Inch series
- SS-EN-6075 - Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series
- SS-EN-6076 - Aerospace series - Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series
- SS-EN-6096 - Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
- SS-EN-6097 - Aerospace series - Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
- SS-EN-6098 - Aerospace series - Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series
- SS-EN-6099 - Aerospace series - Rod-end, spherical, plain bearing, metal to metal - Technical specification
- SS-EN-6133 - Aerospace series - Rod-end, with bearing per EN 6096, with self-lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series
- SS-ISO-10955 - Aerospace - End fittings and turnbarrels for aircraft control wire rope - Technical specification
- SS-ISO-2964 - Aerospace - Tubing - Outside diameters and thicknesses - Metric dimensions
- SS-ISO-7938 - Aircraft - Ball bearings for control cable pulleys - Dimensions and loads
- SS-ISO-9736 - Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads
- SS-ISO-9737 - Aerospace - Eye-ends, in corrosion resistant steel, swaged on aircraft control wire rope - Dimensions and loads
- SS-ISO-9738 - Aerospace - Turnbarrels, for aircraft control wire rope - Dimensions and loads
- SS-ISO-9747 - Aerospace - Double-shank ball-ends, in corrosion resistant steel, swaged on aircraft control wire rope - Dimensions and loads
- SS-ISO-9748 - Aerospace - Ball-ends, in corrosion resistant steel, swaged on aircraft control wire rope - Dimensions and loads
- SS-ISO-9749 - Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads
- SS-ISO-9757 - Aerospace - Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads
- SS-ISO-9758 - Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads
- SS-ISO-9759 - Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads
- SS-ISO-9760 - Aerospace - Fork-ends, in corrosion resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads
- SS-ISO-9761 - Aerospace - Locking clips, in corrosion resistant steel, for aircraft control wire rope turnbuckles - Dimensions
- SS-ISO-9762 - Aerospace - Aircraft control wire rope assemblies - Dimensions and end fitting combinations