Document Center List of Standards on Other Fasteners
ICS Code 49.030.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-2SP-1 - Specification for aircraft material. Shackles
- BS-2SP-7 - Specification for aircraft material. Fork joints (high tensile type) (for sizes No. 4 B.A. to inch B.S.F. inclusive)
- BS-3F-121 - Specification for metallic slide fasteners for aerospace purposes
- BS-3SP-1 - Specification. Shackles, carbon steel, cadmium plated for aircraft
- BS-A-360 - Retainers, spring, sheet metal, for self-locking barrel nuts. Dimensions
- BS-EN-2285 - Aerospace series. Bushes, plain, aluminium alloy, with self-lubricating liner. Dimensions and loads
- BS-EN-2285-TC - Tracked Changes. Aerospace series. Bushes, plain, aluminium alloy, with self-lubricating liner. Dimensions and loads
- BS-EN-2286 - Aerospace series. Bushes, flanged aluminium alloy, with self-lubricating liner. Dimensions and loads
- BS-EN-2286-TC - Tracked Changes. Aerospace series. Bushes, flanged aluminium alloy, with self-lubricating liner. Dimensions and loads
- BS-EN-2287 - Aerospace series. Bush, plain, in corrosion resisting steel with self-lubricating liner. Dimensions and loads
- BS-EN-2287-TC - Tracked Changes. Aerospace series. Bush, plain, in corrosion resisting steel with self-lubricating liner. Dimensions and loads
- BS-EN-2288 - Aerospace series. Bush, flanged, corrosion resisting steel, with self-lubricating liner. Dimensions and loads
- BS-EN-2311 - Aerospace series. Bushes with self-lubricating liner. Technical specification
- BS-EN-2602 - Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration
- BS-EN-2603 - Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration
- BS-EN-2604 - Aerospace series. 8 30' interface for adaptors, threaded, with lockring. Geometric configuration
- BS-EN-2605 - Aerospace series. 24 interface for adaptors, threaded, with lockring. Geometric configuration
- BS-EN-2607 - Aerospace series. O-rings for adaptors, threaded, with lockring. Survey
- BS-EN-2608 - Aerospace series. Installation and removal requirements for 8 30' adaptors, threaded, with lockring
- BS-EN-2645 - Aerospace series. Lockrings for adaptors, threaded, with lockring. Dimensions
- BS-EN-3278 - Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
- BS-EN-3380 - Rings, retaining. Technical specification
- BS-EN-3425 - Aerospace series. Groove dimensions for axial mounting internal type retaining rings
- BS-EN-3426 - Aerospace series. Groove dimensions for axial mounting external type retaining rings
- BS-EN-3427 - Aerospace series. Groove dimensions for radial mounting retaining rings
- BS-EN-3709 - Aerospace series. Wrenches and sockets, bi-hexagonal. Technical specification
- BS-EN-3710 - Aerospace series. Sockets, bi-hexagonal. Technical specification
- BS-EN-3711 - Aerospace series. Wrench-double ended, bi-hexagonal. Straight, cranked, offset
- BS-EN-3729 - Aerospace series. Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated
- BS-EN-3748 - Aerospace series. O-ring grooves. Dimensions
- BS-EN-3781 - Aerospace series. Grooves for spiral wound retaining rings. Design standard
- BS-EN-3819 - Aerospace series. Clearance for wrenches and sockets
- BS-EN-3915 - Aerospace series. Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components. Classification: 1275 MPa (at ambient temperature) / 550C. Technical specification
- BS-EN-3916 - Aerospace series. Insert, thin wall. Salvage procedure for components
- BS-EN-4108 - Aerospace series. Wrenches, crow foot, attachment socket, socket drive
- BS-EN-4109 - Aerospace series. Wrenches, face spanner
- BS-EN-4110 - Aerospace series. Wrenches, open end, box
- BS-EN-4111 - Aerospace series. Wrenches, splined, sockets, for pipe fittings. Technical specification
- BS-EN-4113 - Aerospace series. Clamps, loop ('P' type) in corrosion resisting steel, passivated with rubber cushioning. Dimensions, masses
- BS-EN-4113-TC - Tracked Changes. Aerospace series. Clamps, loop ('P' type) in corrosion resisting steel, passivated with rubber cushioning. Dimensions, masses
- BS-EN-4114 - Aerospace series. Clamps, loop ('P' type) in aluminium alloy with rubber cushioning. Dimensions, masses
- BS-EN-4114-TC - Tracked Changes. Aerospace series. Clamps, loop ('P' type) in aluminium alloy with rubber cushioning. Dimensions, masses
- BS-EN-4115 - Aerospace series. Cushion, rubber for clamps. Dimensions, masses
- BS-EN-4234 - Aerospace series. Clamps, worm drive. Dimensions, masses
- BS-EN-4302 - Aerospace series. Open ring insert tool, square drive
- BS-EN-4303 - Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
- BS-EN-4304 - Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
- BS-EN-4306 - Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
- BS-EN-4307 - Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
- BS-EN-4354 - Aerospace series. Six lobe recess. Drivers, relieved
- BS-EN-4355 - Aerospace series. Six lobe recess. Drivers, socket
- BS-EN-4356 - Aerospace series. Six lobe recess. Drivers, short
- BS-EN-4357 - Aerospace series. Six lobe recess. Drivers, handle
- BS-EN-4358 - Aerospace series. Six lobe recess. Drivers, double ended, 90
- BS-EN-4359 - Aerospace series. Six lobe recess. Drivers. Technical Specification
- BS-EN-6092 - Aerospace series. Receptacle, floating, double lug
- BS-EN-6095 - Aerospace series. Rotary fasteners. Structural and non-structural applications. Technical specification
- BS-EN-6128 - Aerospace series. Blind bolt, 100 flush head, high strength
- BS-ISO-12319 - Aerospace. 'P' (loop style) clamps. Procurement specification
- BS-ISO-23886 - Aerospace. Collar, threaded, self-locking. Test method for torque and preload
- BS-ISO-23887 - Aerospace. Blind fasteners, threaded type, self-locking. Test method for locking torque
- BS-SP-10-&-11 - Specification for washers for aircraft purposes (primarily for facing purposes)
- BS-SP-118 - Tie rods (Unified threads) for aircraft
- BS-SP-141 - Specification for design and performance requirements for toggle type panel fasteners
- BS-SP-59-&-SP-60 - Specifications for Spring catches for aeronautical purposes
- BS-SP-66-&-SP-67 - Specifications for Cable thimbles for aircraft
- BS-SP-8 - Specification for turnbuckles (tension rod type) for aircraft purposes
- PD-CEN-17603-32-21 - Space engineering. Adhesive bonding handbook
- PD-CEN-17603-32-22 - Space engineering. Insert design handbook
ISO:
- ISO-12280 - Aerospace -- Retainers, spring, sheet metal, for self-locking barrel nuts -- Dimensions
- ISO-12319 - Aerospace - P (loop style) clamps - Procurement specification
- ISO-13595 - Aerospace - Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions
- ISO-13596 - Aerospace - Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions
- ISO-13597 - Aerospace - Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions
- ISO-13598 - Aerospace - Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions
- ISO-13599 - Aerospace - Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions
- ISO-23886 - Aerospace - Collar, threaded, self-locking - Test method for torque and preload
- ISO-23887 - Aerospace - Blind fasteners, threaded type, self-locking - Test method for locking torque
- ISO-244 - Aircraft - Sealing wire
Other SDOs:
- EN-2285 - Aerospace series - Bushes, plain, aluminium alloy, with self-lubricating liner - Dimensions and loads
- EN-2286 - Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
- EN-2287 - Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
- EN-2311 - Aerospace series - Bushes with self-lubricating liner - Technical specification
- EN-2608 - Aerospace Series, Installation & Removal Requirements for 8 Degrees 30' Adaptors, Thr
- EN-2645 - Aerospace Series - Lockrings for Adaptors, Threaded, With Lockring - Dimensions
- EN-3278 - Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
- EN-3425 - Aerospace Series - Groove Dimensions for Axial Mounting Internal Type Retaining Rings
- EN-3710 - Aerospace Series - Sockets, BI-Hexagonal - Technical Specification
- EN-3711 - Aerospace Series - Wrench-Bouble Ended, BI-Hexagonal - Straight, Cranked, Offset
- EN-3729 - Aerospace Series - Rings, Threaded, Self-Locking, Left-Hand Thread, in Heat Resisting
- EN-3781 - Aerospace Series - Grooves for Spiral Wound Retaining Rings - Design Standard
- EN-3819 - Aerospace Series - Clearance for Wrenches & Sockets
- EN-3915 - Aerospace Series, Insert, Thin Wall, Self-Locking, Mj Threads, in Heat Resisting Nicke
- EN-3916 - Aerospace Series, Insert, Thin Wall, Salvage Procedure for Components
- EN-4108 - Aerospace Series - Wrenches, Crow Foot, Attachment Socket, Socket Drive
- EN-4109 - Aerospace Series - Wrenches, Face Spanner
- EN-4110 - Aerospace Series - Wrenches, Open End, Box
- EN-4111 - Aerospace Series - Wrenches, Splined, Socket for Pipe Fittings, Technical Specificatio
- EN-4113 - Aerospace Series - Clamps, Loop ('P' Type) in Corrosion Resisting Steel, Passivated, W
- EN-4114 - Aerospace Series - Clamps, Loop ('P' Type) in Aluminium Alloy, With Rubber Cushioning
- EN-4115 - Aerospace Series - Cushion, Rubber for Clamps - Dimensions, Masses
- EN-4234 - Aerospace series - Clamps, worm drive - Dimensions, masses
- EN-4302 - Aerospace Series - Open Ring Insert Tool, Square Drive
- EN-4354 - Aerospace Series, Six Lobe Recess, Drivers, Relieved
- EN-4355 - Aerospace Series - Six Lobe Recess - Drivers, Socket
- EN-4356 - Aerospace Series - Six Lobe Recess - Drivers, Short
- EN-4357 - Aerospace Series - Six Lobe Recess - Drivers, Handle
- EN-4358 - Aerospace Series - Six Lobe Recess - Drivers, Double Ended, 90 Degrees
- EN-4359 - Aerospace Series - Six Lobe Recess - Drivers - Technical Specification
- EN-6092 - Aerospace series - Receptacle, floating, double lug
- EN-6128 - Aerospace series - Blind bolt, 100 Deg flush head, high strength
- SS-EN-2138 - Aerospace series - Washers, flat, large diameter,in alloy steel, cadmium plated
- SS-EN-2285 - Aerospace series - Bushes, plain, aluminium alloy, with self-lubricating liner - Dimensions and loads
- SS-EN-2286 - Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
- SS-EN-2287 - Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
- SS-EN-2288 - Aerospace series - Bush, flanged, corrosion resisting steel, with self-lubricating liner - Dimensions and loads
- SS-EN-2311 - Aerospace series - Bushes with self-lubricating liner - Technical specification
- SS-EN-2602 - Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration
- SS-EN-2603 - Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration
- SS-EN-2604 - Aerospace series - 8 degrees 30' interface for adaptors, threaded, with lockring - Geometric configuration
- SS-EN-2605 - Aerospace series - 24 degrees interface for adaptors, threaded, with lockring - Geometric configuration
- SS-EN-2607 - Aerospace series - O-rings for adaptors, threaded, with lockring - Survey
- SS-EN-2608 - Aerospace series - Installation and removal requirements for 8 degrees 30' adaptors, threaded, with lockring
- SS-EN-2645 - Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions
- SS-EN-2913 - Aerospace series - Washers, flat, large diameter, in alloy steel, cadmium plated
- SS-EN-3236 - Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
- SS-EN-3237 - Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
- SS-EN-3238 - Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
- SS-EN-3278 - Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
- SS-EN-3297 - Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
- SS-EN-3298 - Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure
- SS-EN-3425 - Aerospace series - Groove dimensions for axial mounting internal type retaining rings
- SS-EN-3426 - Aerospace series - Groove dimensions for axial mounting external type retaining rings
- SS-EN-3427 - Aerospace series - Groove dimensions for radial mounting retaining rings
- SS-EN-3676 - Aerospace series - Inserts, thin wall, self-locking - Design standard
- SS-EN-3709 - Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification
- SS-EN-3729 - Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated
- SS-EN-3781 - Aerospace series - Grooves for spiral wound retaining rings - Design standard
- SS-EN-3819 - Aerospace series - Clearance for wrenches and sockets
- SS-EN-3915 - Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 degrees Celsius - Technical specification
- SS-EN-3916 - Aerospace series - Insert, thin wall - Salvage procedure for components
- SS-EN-4108 - Aerospace series - Wrenches, crow foot, attachment socket, socket drive
- SS-EN-4109 - Aerospace series - Wrenches, face spanner
- SS-EN-4110 - Aerospace series - Wrenches, open end, box
- SS-EN-4111 - Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification
- SS-EN-4113 - Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
- SS-EN-4114 - Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
- SS-EN-4115 - Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- SS-EN-4234 - Aerospace series - Clamps, worm drive - Dimensions, masses
- SS-EN-4302 - Aerospace series - Open ring insert tool, square drive
- SS-EN-4303 - Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
- SS-EN-4304 - Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
- SS-EN-4306 - Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
- SS-EN-4307 - Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
- SS-EN-4354 - Aerospace series - Six lobe recess - Drivers, relieved
- SS-EN-4355 - Aerospace series - Six lobe recess - Drivers, socket
- SS-EN-4356 - Aerospace series - Six lobe recess - Drivers, short
- SS-EN-4357 - Aerospace series - Six lobe recess - Drivers, handle
- SS-EN-4358 - Aerospace series - Six lobe recess - Drivers, double ended, 90 degrees
- SS-EN-4359 - Aerospace series - Six lobe recess - Drivers - Technical specification
- SS-EN-6092 - Aerospace series - Receptacle, floating, double lug
- SS-EN-6128 - Aerospace series - Blind bolt, 100° flush head, high strength
- SS-EN-ISO-13693-1 - Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation (ISO 13693-1:2013)
- SS-ISO-13595 - Aerospace - Inserts, with self-locking floating nut, with MJ-threads, in metallic material, coated or uncoated - Dimensions
- SS-ISO-13596 - Aerospace - Inserts, self-locking, with MJ-threads, closed type, in metallic material, coated or uncoated - Dimensions
- SS-ISO-13597 - Aerospace - Inserts, self-locking, with MJ-thread, open type, in metallic material, coated or uncoated - Dimensions
- SS-ISO-13598 - Aerospace - Inserts, self-locking, with MJ-thread,reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions
- SS-ISO-13599 - Aerospace - Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions