Document Center List of Standards on Ferrous Alloys In General
ICS Code 49.025.05
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E1558 - Standard Guide for Electrolytic Polishing of Metallographic Specimens
- ASTM-E2864 - Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
- ASTM-F482 - Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
- ASTM-F483 - Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
BSI:
- BS-EN-2002-16 - Aerospace series. Metallic materials. Test methods
- BS-EN-2002-2 - Aerospace series. Metallic materials. Test methods
- BS-EN-2002-21 - Aerospace series. Metallic materials. Test methods
- BS-EN-2032-001 - Aerospace series. Metallic materials
- BS-EN-2032-1 - Metallic materials. Conventional designation
- BS-EN-2043 - Aerospace series. Metallic materials. General requirements for semi-finished product qualification (excluding forgings and castings)
- BS-EN-2078 - Aerospace series. Metallic materials. Manufacturing schedule, inspection schedule, inspection and test report. Definition, general principles, preparation and approval
- BS-EN-2119 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated. Wires for rivets. 2 mm D 10 mm. Rm 960 MPa
- BS-EN-2600 - Aerospace series. Designation of metallic semi-finished products. Rules
- BS-EN-3510 - Aerospace series. Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15). Solution treated and precipitation treated. Bars and sections. De 100 mm
- BS-EN-3639 - Aerospace series. Heat resisting alloy X6NiCrTiMoV26-15 (1.4980). Softened and cold worked. Wires for forged fasteners. D 15 mm. 900 MPa Rm 1 100 MPa
- BS-EN-3761 - Aerospace series. Heat resisting alloy FE-PA2601. Softened and cold worked. Bar for forged fasteners. D 50 mm. 1 100 MPa Rm 1 300 MPa
- BS-EN-3762 - Aerospace series. Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944). Softened and cold worked. Wire for forged fasteners. D ? 15 mm - 1 100 MPa ? Rm ? 1 300 MPa
- BS-EN-3875 - Aerospace series. Metallic materials, Filler metal for brazing. Technical specification
- BS-EN-3879 - Aerospace series. Metallic materials. Filler metal for welding. Technical specification
- BS-EN-3987 - Aerospace series. Test methods for metallic materials. Constant amplitude force-controlled high cycle fatigue testing
- BS-EN-4000 - Aerospace series. Metallic materials. Rules for the drafting and presentation of dimensional standards for metallic semi-finished products
- BS-EN-4050-1 - Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings
- BS-EN-4050-2 - Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings
- BS-EN-4050-3 - Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings
- BS-EN-4050-4 - Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings
- BS-EN-4060 - Aerospace series. Filler rods and filler wires for welding in heat resisting alloys. Diameter 0,5 mm D 5,0 mm. Dimensions
- BS-EN-4259 - Aerospace series. Metallic materials. Definition of general terms
- BS-EN-4260 - Aerospace series. Metallic materials. Rules for drafting and presentation of technical specifications
- BS-EN-4261 - Aerospace series. Metallic materials. Rules for drafting and presentation of test method standards
- BS-EN-4268 - Aerospace series. Metallic materials. Heat treatment facilities. General requirements
- BS-EN-4314 - Aerospace series. Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15). Non heat treated, forging stock a or D ? 250 mm
- BS-EN-4315 - Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section a or D ? 100 mm, Rm ? 900 MPa
- BS-EN-4317 - Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Non heat treated, forging stock a or D ? 200 mm
- BS-EN-4318 - Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De ? 100 mm, Rm ? 960 MPa
- BS-EN-4500-001 - Aerospace series. Metallic materials. Rules for drafting and presentation of material standards
- BS-EN-4500-002 - Aerospace series. Metallic materials. Rules for drafting and presentation of material standards
- BS-EN-4500-003 - Aerospace series. Metallic materials. Rules for drafting and presentation of material standards
- BS-EN-4500-003-TC - Tracked Changes. Aerospace series. Metallic materials. Rules for drafting and presentation of material standards
- BS-EN-4500-004 - Aerospace series. Metallic materials. Rules for drafting and presentation of material standards
- BS-EN-4500-005 - Aerospace series. Metallic materials. Rules for drafting and presentation of material standards
- BS-EN-4500-006 - Aerospace series. Metallic materials. Rules for drafting and presentation of material standards
- BS-EN-4526 - Aerospace series. Metallic materials. Test methods. Sharp edge-notch tensile testing for sheet and strip
- BS-EN-4571 - Aerospace series. Heat resisting alloy X12CrNiCoMoW21- 20. Solution treated. Bars and sections. De 100 mm
- BS-EN-4575 - Aerospace series. Heat resisting alloy X12CrNiCoMoW21-20. Solution treated and descaled. Sheets and plates. 3 mm < a 50 mm
- BS-EN-4678 - Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments
- BS-EN-6018 - Aerospace series. Test methods for metallic materials. Determination of density according to displacement method
- BS-EN-6072 - Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing
Other SDOs:
- EN-2032-001 - Aerospace series - Metallic materials - Part 001: Conventional designation
- EN-2043 - Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)
- EN-3873 - Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
- EN-3875 - Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
- EN-3987 - Aerospace Series - Test Methods for Metallic Materials - Constant Amplitude Force-Cont
- EN-4050-1 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
- EN-4050-2 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
- EN-4050-3 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
- EN-4050-4 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
- EN-4268 - Aerospace series - Metallic materials - Heat treatment facilities - General requirements
- EN-4314 - Aerospace Series - Heat Resisting Alloy FE-Pa2602 (X4Nicrtimov26-15) - Non Heat Treate
- EN-4315 - Aerospace Series - Heat Resisting Alloy FE-Pa2601 (X6Nicrtimov26-15) - Solution Treate
- EN-4317 - Aerospace Series, Heat Resisting Alloy FE-Pa2601 (X6Nicrtimov26-15), Non Heat Treated,
- EN-4318 - Aerospace Series - Heat Resisting Alloy FE-Pa2601 (X6Nicrtimov26-15) - Solution Treate
- EN-4500-001 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
- EN-4500-003 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys
- EN-4526 - Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
- EN-6018 - Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
- EN-6072 - Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing
- SS-EN-2002-001 - Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature
- SS-EN-2002-002 - Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
- SS-EN-2002-16 - Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing
- SS-EN-2002-21 - Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings
- SS-EN-2032-001 - Aerospace series - Metallic materials - Part 001: Conventional designation
- SS-EN-2032-1 - Aerospace series - Metallic materials - Part 1: Conventional designation
- SS-EN-2043 - Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)
- SS-EN-2119 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa
- SS-EN-3510 - Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De = 100 mm
- SS-EN-3639 - Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D = 15 mm - 900 MPa = Rm = 1 100 MPa
- SS-EN-3761 - Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D = 50 mm - 1 100 MPa = Rm = 1 300 MPa
- SS-EN-3762 - Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D = 15 mm - 1 100 MPa = Rm = 1 300 MPa
- SS-EN-3873 - Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
- SS-EN-3875 - Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
- SS-EN-3969 - Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm
- SS-EN-3987 - Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
- SS-EN-4000 - Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products
- SS-EN-4050-1 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
- SS-EN-4050-2 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
- SS-EN-4050-3 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
- SS-EN-4050-4 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
- SS-EN-4060 - Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm less than or equal to D less than or equal to 5,0 mm - Dimensions
- SS-EN-4244 - Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D = 200 mm - 1 000 MPa = Rm = 1 140 MPa
- SS-EN-4259 - Aerospace series - Metallic materials - Definition of general terms
- SS-EN-4260 - Aerospace series - Metallic materials - Rules for drafting and presentation of technical specifications
- SS-EN-4261 - Aerospace series - Metallic materials - Rules for drafting and presentation of test method standards
- SS-EN-4264 - Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D = 200 mm
- SS-EN-4268 - Aerospace series - Metallic materials - Heat treatment facilities - General requirements
- SS-EN-4314 - Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 250 mm
- SS-EN-4315 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D ≤ 100 mm, Rm ≥ 900 MPa
- SS-EN-4317 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 200 mm
- SS-EN-4318 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≥ 960 MPa
- SS-EN-4500-001 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
- SS-EN-4500-003 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys
- SS-EN-4526 - Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
- SS-EN-4533-001 - Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
- SS-EN-4570 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Forgings - De ≤ 100 mm
- SS-EN-4571 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De = 100 mm
- SS-EN-4572 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a = 3 mm
- SS-EN-4573 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De = 100 mm
- SS-EN-4574 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De = 100 mm
- SS-EN-4575 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a = 50 mm
- SS-EN-4678 - Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments
- SS-EN-6018 - Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
- SS-EN-6072 - Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing