Document Center is acquired by Nimonik

Document Center List of Standards on Electrical Equipment Of Ships And Of Marine Structures

ICS Code 47.020.60

Return to ICS Index.

Up to Level 2:

• 47.020 (Shipbuilding and marine structures in general Including offshore structures, except offshore structures for petroleum and natural gas industries, and seabed mining Water transport, see 03.220.40 Offshore structures for seabed mining, see 73.100.30 Offshore structures for petroleum and natural gas industries, see 75.180.10)

The following documents are a part of this series:

ASTM:

• ASTM-E1524 - Standard Test Method for Saltwater Immersion and Corrosion Testing of Photovoltaic Modules for Marine Environments (Withdrawn 2004)
• ASTM-F1669M - Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]
• ASTM-F1836M - Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
• ASTM-F2044 - Standard Specification for Liquid Level Indicating Equipment, Electrical
• ASTM-F681 - Standard Practice for Use of Branch Connections

BSI:

• BS-1597 - Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations
• BS-3399 - Specification for transformers for use in ships
• BS-6883 - Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
• BS-7027 - Specification for limits and methods of measurement of the immunity of marine electrical and electronic equipment to conducted and radiated electromagnetic interference
• BS-7917 - Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
• BS-8450 - Code of practice for installation of electrical and electronic equipment in ships
• BS-EN-15869-1 - Inland navigation vessels. Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A
• BS-EN-15869-2 - Inland navigation vessels. Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A
• BS-EN-15869-3 - Inland navigation vessels. Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A
• BS-EN-16840 - Inland navigation vessels. Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
• BS-EN-60092-507 - Electrical installations in ships
• BS-EN-ISO-13297 - Small craft. Electrical systems. Alternating and direct current installations
• BS-IEC-60092-101 - Electrical installations in ships
• BS-IEC-60092-101-TC - Tracked Changes. Electrical installations in ships
• BS-IEC-60092-201 - Electrical installations in ships
• BS-IEC-60092-202 - Electrical installations in ships
• BS-IEC-60092-204 - Electrical installation in ships. System design. Electric and electrohydraulic steering gear
• BS-IEC-60092-301 - Electrical installation in ships
• BS-IEC-60092-302 - Electrical installation in ships
• BS-IEC-60092-302-2 - Electrical installations in ships
• BS-IEC-60092-303 - Electrical installations in ships
• BS-IEC-60092-304 - Electrical installations in ships
• BS-IEC-60092-304-TC - Tracked Changes. Electrical installations in ships
• BS-IEC-60092-305 - Electrical installation in ships
• BS-IEC-60092-306 - Electrical installations in ships
• BS-IEC-60092-307 - Electrical installation in ships. Equipment. Heating and cooking appliances
• BS-IEC-60092-401 - Electrical installation in ships
• BS-IEC-60092-501 - Electrical installations in ships
• BS-IEC-60092-502 - Electrical installation in ships. Tankers. Special features
• BS-IEC-60092-503 - Electrical installations in ships
• BS-IEC-60092-503-TC - Tracked Changes. Electrical installations in ships
• BS-IEC-60092-504 - Electrical installations in ships
• BS-IEC-60092-509 - Electrical installations in ships
• BS-IEC-60533-TC - Tracked Changes. Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull
• BS-IEC-61363-1 - Electrical installations of ships and mobile and fixed offshore units
• BS-IEC-61892-1 - Mobile and fixed offshore units. Electrical installations
• BS-IEC-61892-2 - Mobile and fixed offshore units. Electrical installations
• BS-IEC-61892-3 - Mobile and fixed offshore units. Electrical installations
• BS-IEC-61892-4 - Mobile and fixed offshore units. Electrical installations
• BS-IEC-61892-5 - Mobile and fixed offshore units. Electrical installations
• BS-IEC-61892-6 - Mobile and fixed offshore units. Electrical installations
• BS-IEC-61892-7 - Mobile and fixed offshore units. Electrical installations
• BS-IEC/IEEE-80005-1 - Utility connections in port
• BS-IEC/IEEE-80005-2 - Utility connections in port
• PD-IEC/PAS-80005-3 - Utility connections in port

IEC:

• IEC-60092-101 - Electrical installations in ships - Part 101: Definitions and general requirements
• IEC-60092-201 - Electrical installations in ships - Part 201: System design - General
• IEC-60092-202 - Electrical installations in ships - Part 202: System design - Protection
• IEC-60092-202-RL - Electrical installations in ships - Part 202: System design - Protection
• IEC-60092-302 - Electrical installations in ships - Part 302: Low-voltage switchgear and controlgear assemblies
• IEC-60092-302-2 - Electrical installations in ships - Part 302-2: Low voltage switchgear and controlgear assemblies - Marine power
• IEC-60092-303 - Electrical installations in ships - Part 303: Equipment - Power transformers and reactors
• IEC-60092-303-1 - Amendment No. 1
• IEC-60092-304 - Electrical installations in ships - Part 304: Equipment - Semiconductor converters
• IEC-60092-306 - Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
• IEC-60092-306-RL - Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
• IEC-60092-350 - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
• IEC-60092-350-RL - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
• IEC-60092-351 - Part 351: Insulating Materials for Shipboard & Offshore Units, Power, Control, Instrumenta
• IEC-60092-352 - Electrical installations in ships - Part 352: Choice and installation of electrical cables
• IEC-60092-353 - Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
• IEC-60092-353-RL - Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
• IEC-60092-354 - Electrical installations in ships . Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
• IEC-60092-354-RL - Electrical installations in ships – Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
• IEC-60092-360 - Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables
• IEC-60092-360-RL - Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables
• IEC-60092-370 - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
• IEC-60092-370-RL - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
• IEC-60092-376 - Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
• IEC-60092-376-RL - Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
• IEC-60092-401-2 - Amendment No. 2
• IEC-60092-501 - Electrical installations in ships - Part 501: Special features - Electric propulsion plant
• IEC-60092-502 - Electrical installations in ships - Part 502: Tankers - Special features
• IEC-60092-503 - Electrical installations in ships - Part 503: Special features - AC supply systems with voltages in the range of above 1 kV up to and including 15 kV
• IEC-60092-504 - Electrical installations in ships - Part 504: Automation, control and instrumentation
• IEC-60092-504-RL - Electrical installations in ships - Part 504: Automation, control and instrumentation
• IEC-60092-506 - Electrical installations in ships - Part 506: Special features - Ships carrying specific dangerous goods and materials hazardous only in bulk
• IEC-60092-507 - Electrical installations in ships - Part 507: Small vessels
• IEC-60092-509 - Electrical installations in ships - Part 509: Operation of electrical installations
• IEC-60092-510 - Part 510: Special Features - High-Voltage Shore Connection Systems, Electrical Install
• IEC-61363-1 - Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
• IEC-61892-1 - Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
• IEC-61892-1-RL - Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
• IEC-61892-2 - Mobile and fixed offshore units - Electrical installations - Part 2: System design
• IEC-61892-3 - Mobile and fixed offshore units - Electrical installations - Part 3: Equipment
• IEC-61892-4 - Mobile and fixed offshore units - Electrical installations - Part 4: Cables
• IEC-61892-5 - Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units
• IEC-61892-6 - Mobile and fixed offshore units - Electrical installations - Part 6: Installation
• IEC-61892-7 - Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
• IEC-61892-SERIES - Mobile and fixed offshore units - Electrical installations - ALL PARTS
• IEC-62482 - Electrical installations in ships - Electromagnetic compatibility - Optimising of cable installations on ships - Testing method of routing distance
• IEC-62742 - Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a non-metallic hull
• IEC-92-201 - Electrical installations in ships - Part 201: System design - General
• IEC-92-202 - Electrical installations in ships - Partie 202: System design - Protection
• IEC-92-202-1 - Amendment No. 1
• IEC-92-301 - Electrical installations in ships. Part 301: Equipment - Generators and motors
• IEC-92-301-1 - Amendment No. 1
• IEC-92-301-2 - Amendment No. 2
• IEC-92-302 - Electrical installations in ships - Part 302: Low-voltage switchgear and controlgear assemblies
• IEC-92-303 - Electrical installations in ships. Part 303: Equipment - Transformers for power and lighting
• IEC-92-304 - Electrical installations in ships. Part 304: Equipment - Semiconductor convertors
• IEC-92-304-1 - Amendment No. 1
• IEC-92-305 - Electrical installations in ships. Part 305: Equipment - Accumulator (storage) batteries
• IEC-92-305-1 - Amendment No. 1
• IEC-92-307 - Electrical installations in ships. Part 307: Equipment - Heating and cooking appliances
• IEC-92-401 - Electrical installations in ships. Part 401: Installation and test of completed installation
• IEC-92-401-1 - Amendment No. 1
• IEC/IEEE-61886-1 - Subsea equipment - Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (U_max = 3,6 kV) to 30 kV (U_max = 36 kV)
• IEC/IEEE-80005-1 - Utility connections in port - Part 1: High voltage shore connection (HVSC) systems - General requirements
• IEC/IEEE-80005-1-AM1 - Amendment 1 - Utility connections in port - Part 1: High voltage shore connection (HVSC) systems - General requirements
• IEC/IEEE-80005-1-AM2 - Amendment 2 - Utility connections in port - Part 1: High voltage shore connection (HVSC) systems - General requirements
• IEC/IEEE-80005-1-RL - Utility connections in port - Part 1: High voltage shore connection (HVSC) systems - General requirements
• IEC/IEEE-80005-2 - Utility connections in port - Part 2: High and low voltage shore connection systems - Data communication for monitoring and control
• IEC/ISO/IEEE-80005-1 - Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
• IEC/PAS-60092-510 - Part 510: Special Features - High-Voltage Shore Connection Systems, Electrical Install
• IEC/PAS-63108 - Electrical installation in ships - Primary DC distribution - System design architecture
• IEC/PAS-80005-3 - Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements

ISO:

• ISO/IEC/IEEE-80005-1 - Cold ironing - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements

Other SDOs:

• EN-15869-1 - Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 1: General requirements
• EN-15869-2 - Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements
• EN-15869-3 - Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements
• EN-16840 - Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
• EN-60092-507 - Electrical installations in ships - Part 507 - Small vessels
• JIS-C-3410 - Cables and flexible cords for electrical equipment of ships
• SS-EN-15869-1 - Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 1: General requirements
• SS-EN-15869-2 - Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements
• SS-EN-15869-3 - Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 3: On-board unit, additional requirements
• SS-EN-16840 - Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
• SS-EN-ISO-10133 - Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)
• SS-EN-ISO-13297 - Small craft - Electrical systems - Alternating and direct current installations (ISO 13297:2020)
• SS-EN-ISO-13297-AM1 - Small craft - Electrical systems - Alternating and direct current installations - Amendment 1 (ISO 13297:2020/Amd 1:2022)
• SS-EN-ISO-13297-AM11 - Small craft - Electrical systems - Alternating and direct current installations
• UNE-HD-60364-7-730 - Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels
• UNE-IEC-61892-4 - Mobile and fixed offshore units - Electrical installations - Part 4: Cables