Document Center is acquired by Nimonik

Document Center List of Standards on Deck Equipment And Installations

ICS Code 47.020.50

Return to ICS Index.

Up to Level 2:

• 47.020 (Shipbuilding and marine structures in general Including offshore structures, except offshore structures for petroleum and natural gas industries, and seabed mining Water transport, see 03.220.40 Offshore structures for seabed mining, see 73.100.30 Offshore structures for petroleum and natural gas industries, see 75.180.10)

The following documents are a part of this series:

ASTM:

• ASTM-E2632 - Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
• ASTM-F1019M - Standard Specification for Steel Deck Gear Stowage Box [Metric]
• ASTM-F1074 - Standard Specification for Cleats, Welded Horn Type
• ASTM-F1198 - Standard Guide for Shipboard Fire Detection Systems
• ASTM-F1322 - Standard Guide for Selection of Shipboard Incinerators
• ASTM-F1994 - Standard Test Method for Shipboard Fixed Foam Firefighting Systems
• ASTM-F2935 - Standard Specification for Chocks, Panama, Mooring Cast Steel
• ASTM-F2936 - Standard Specification for Chocks, Ship Mooring, Cast Steel
• ASTM-F915 - Specification for Bitts, Ship Mooring, Cast Steel (Double Barrel) (Withdrawn 1995)
• ASTM-F938 - Specification for Bitts, Ship Mooring, Welded Steel (Double Barrel) (Withdrawn 1995)

BSI:

• BS-4263 - Specification for the Marking of Hatchway Beams
• BS-7471 - Specification for mooring winches
• BS-EN-12339 - Inland navigation vessels. Rope tubs
• BS-EN-13573 - Inland navigation vessels. Anchoring, coupling, towing, hauling and mooring systems
• BS-EN-14606 - Inland navigation vessels. Studless anchor chain. Accessories
• BS-EN-14874 - Inland navigation vessels. Studless anchor chain. Cable lifter
• BS-EN-14965 - Inland navigation vessels. Flat bollards
• BS-EN-15271 - Inland navigation vessels. Studless anchor chain. Anchor equipment
• BS-EN-15272-1 - Inland navigation vessels. Equipment for rope leading
• BS-EN-15272-2 - Inland navigation vessels. Rope leading
• BS-EN-15272-3 - Inland navigation vessels. Equipment for rope leading
• BS-EN-15272-4 - Inland navigation vessels. Equipment for rope leading
• BS-EN-1864 - Inland navigation vessels. Wheelhouse. Ergonomic and safety requirements
• BS-EN-ISO-5778 - Ships and marine technology. Small weathertight steel hatches
• BS-EN-ISO-6218 - Inland navigation vessels. Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels. Safety requirements and main dimensions
• BS-EN-ISO-9519 - Ships and marine technology. Single rungs and rungs for dog-step ladders
• BS-EN-ISO-9519-TC - Tracked Changes. Ships and marine technology. Single rungs and rungs for dog-step ladders
• BS-ISO-13122 - Ships and marine technology. Launching appliances for davit-launched liferafts
• BS-ISO-13713 - Ships and marine technology. Ship's mooring and towing fittings. Mooring chocks
• BS-ISO-13728 - Ships and marine technology. Ship's mooring and towing fittings. Panama chocks
• BS-ISO-13729 - Ships and marine technology. Ship's mooring and towing fittings. Closed chocks
• BS-ISO-13733 - Ships and marine technology. Ship's mooring and towing fittings. Universal fairleads with upper roller
• BS-ISO-13742 - Ships and marine technology. Ship's mooring and towing fittings. Universal fairleads without upper roller
• BS-ISO-13755 - Ships and marine technology. Ship's mooring and towing fittings. Steel rollers
• BS-ISO-13767 - Ships and marine technology. Ship's mooring and towing fitting. Shipside roller fairleads
• BS-ISO-13776 - Ships and marine technology. Ship's mooring and towing fittings. Pedestal fairleads
• BS-ISO-13795 - Ships and marine technology. Ship's mooring and towing fittings. Welded steel bollards for sea-going vessels
• BS-ISO-13797 - Ships and marine technology. Ship's mooring and towing fittings. Cruciform bollards
• BS-ISO-13798 - Ships and marine technology. Ship's mooring and towing fittings. Recessed bitts (steel plate type)
• BS-ISO-13799 - Ships and marine technology. Ship's mooring and towing fittings. Recessed bitts (casting type)
• BS-ISO-14612 - Ships and marine technology. Ship's bridge layout and associated equipment. Requirements and guidelines for centralized and intergrated bridge functions.
• BS-ISO-15516 - Ships and marine technology. Launching appliances for davit-launched lifeboats
• BS-ISO-16855 - Ships and marine technology. Loose gear of lifting appliances on ships. General requirements
• BS-ISO-16856 - Ships and marine technology. Loose gear of lifting appliances on ships. Hooks
• BS-ISO-16857 - Ships and marine technology. Loose gear of lifting appliances on ships. Shackles
• BS-ISO-16858 - Ships and marine technology. Loose gear of lifting appliances on ships. Pulleys
• BS-ISO-1704 - Ships and marine technology. Stud-link anchor chains
• BS-ISO-1704-TC - Tracked Changes. Ships and marine technology. Stud-link anchor chains
• BS-ISO-17899 - Ships and marine technology. Marine electric window wipers
• BS-ISO-17905 - Ships and marine technology. Installation, inspection and maintenance of container securing devices for ships
• BS-ISO-18289 - Ships and marine technology. Navigation and shallow-water engineering vessels. Anchor winches
• BS-ISO-18296 - Ships and marine technology. Ship-shifting winches
• BS-ISO-21130 - Ships and marine technology. Major components of emergency towing arrangements
• BS-ISO-21539 - Ships and marine technology. Testing specification for walkways using electrical resistance trace heating
• BS-ISO-21711 - Marine structures. Mobile offshore units. Chain wheels
• BS-ISO-21885 - Ships and marine technology. Testing specification for stairsteps using electrical resistance trace heating
• BS-ISO-22419 - Ships and marine technology. Testing specification for handrails using electrical resistance trace heating
• BS-ISO-22673 - Ships and marine technology. Launching appliances for free-fall lifeboats
• BS-ISO-23113 - Ships and marine technology. Ship's mooring and towing fittings. Seats for closed chocks
• BS-ISO-23115 - Ships and marine technology. Ship's mooring and towing fittings. Seats for mooring chocks
• BS-ISO-23116 - Ships and marine technology. Ships mooring and towing fittings. Seats for Panama chocks
• BS-ISO-24041 - Ships and marine technology. Shark jaws and towing pins
• BS-ISO-24042 - Liquid cargo handling equipment. Crude oil offloading system. Tandem mooring winches
• BS-ISO-24043 - Marine structures. Crude oil offloading systems. Hose reels
• BS-ISO-24044 - Ships and marine technology. Deck machinery. Multifunctional manipulator
• BS-ISO-24045 - Ships and marine technology. Adjustable roller-type chain stoppers
• BS-ISO-24059 - Ships and marine technology. Anchor chain releasers
• BS-ISO-24061 - Ships and marine technology. High holding power balance anchors
• BS-ISO-24681 - Ships and marine technology. Fibre-reinforced plastic gratings
• BS-ISO-29400 - Ships and marine technology. Offshore wind energy. Port and marine operations
• BS-ISO-3730 - Shipbuilding and marine structures. Mooring winches
• BS-ISO-3828 - Shipbuilding and marine structures. Deck machinery. Vocabulary and symbols
• BS-ISO-4845 - Ships and marine technology. Combined rigging for deep-sea mooring
• BS-ISO-4853 - Ships and marine technology. A-frame launch and recovery system
• BS-ISO-4857 - Ships and marine technology. Test procedures and methods for windlasses and winches
• BS-ISO-4862 - Ships and marine technology. Winches for trailing suction hopper dredger
• BS-ISO-4864 - Ships and marine technology. Jacking system appliances on self-elevating unit. General requirements
• BS-ISO-5488 - Ships and marine technology. Accommodation ladders
• BS-ISO-5489 - Ships and marine technology. Embarkation ladders
• BS-ISO-5489-TC - Tracked Changes. Ships and marine technology. Embarkation ladders
• BS-ISO-5528 - Ships and marine technology. Deep-sea hydraulic winch equipment
• BS-ISO-5540 - Ships and marine technology. Sea-going vessels. Dual traction/stowage winches for oceanographic research
• BS-ISO-5556 - Ships and marine technology. Sea-going vessels. Single-drum winches for oceanographic research
• BS-ISO-5694 - Ships and marine technology. Deck covering
• BS-ISO-6482 - Shipbuilding. Deck machinery. Warping end profiles
• BS-ISO-7364 - Ships and marine technology. Deck machinery. Accommodation ladder winches
• BS-ISO-7365 - Shipbuilding and marine structures. Deck machinery. Towing winches for deep sea use
• BS-ISO-7825 - Shipbuilding. Deck machinery. General requirements
• BS-ISO-799 - Ships and marine technology. Pilot ladders
• BS-ISO-799-1 - Ships and marine technology — Pilot ladders Part 1: Design and specification
• BS-ISO-799-2 - Ships and marine technology. Pilot ladders
• BS-ISO-799-3 - Ships and marine technology. Pilot ladders
• BS-ISO-9089 - Marine structures. Mobile offshore units. Mooring positioning windlasses and winches
• BS-ISO-9557 - Ships and marine technology. Wire rope lifting platform for inspection
• BS-MA-12-1 - Specification for Welded Steel Bollards, Vertical Type
• BS-MA-12-2 - Cruciform Type
• BS-MA-19 - Specification for Panama-Type Fairleads
• BS-MA-21 - Specification for Deck-End Roller Fairleads
• BS-MA-22 - Specification for Cast Roller Fairleads
• BS-MA-23 - Specification for Multi-Angle Roller Fairleads
• BS-MA-28 - Specification for dimensions of tracks for mast and deck fittings
• BS-MA-30 - Glossary of Terms & Graphical Symbols for Ships' Deck Machinery
• BS-MA-31 - Specification for Ships' Deck Machinery - Cargo Winches
• BS-MA-32 - Specification for ships' deck machinery - mooring winches
• BS-MA-33 - Specification for Ships' Deck Machinery - Warping Winches
• BS-MA-35 - Specification for Ships' Deck Machinery - Windlasses
• BS-MA-40-1 - Specification for Marine Guardrails, Stanchions, Etc, Guardrails for Merchant Ships (E
• BS-MA-40-2 - Specification for Marine Guardrails, Stanchions, Etc., Gates & Portable Guardrail Sect
• BS-MA-40-3 - Specification for Marine Guardrails, Stanchions, Etc., Storm Rails (Exterior)
• BS-MA-42 - Specification for Ships' Awnings & Supports
• BS-MA-52 - Specification for Ships' Deck Machinery - Accommodation Ladder Winches
• BS-MA-53 - Specification for Ships' Deck Machinery - Towing Winches for Deep Sea Use
• BS-MA-55 - Specification for Ships' Deck Machinery - Lifeboat Winches
• BS-MA-56 - Specification for Ships' Deck Machinery - Anchor Cable Stoppers
• BS-MA-57 - Specification for ships' deck machinery - rope storage reels
• BS-MA-70-1 - Specification for Dimensions of Anchor Chain Cables, Stud-Link Anchor Chain Cables
• BS-MA-78 - Specification for aluminium shore gangways
• BS-MA-88 - Specification for heated glass panes for ships' windows

ISO:

• ISO-13122 - Ships and marine technology - Launching appliances for davit-launched liferafts
• ISO-13713 - Ships and marine technology - Ships mooring and towing fittings - Mooring chocks
• ISO-13728 - Ships and marine technology - Ships mooring and towing fittings - Panama chocks
• ISO-13729 - Ships and marine technology - Ships mooring and towing fittings - Closed chocks
• ISO-13733 - Ships and marine technology - Ships mooring and towing fittings - Universal fairleads with upper roller
• ISO-13742 - Ships and marine technology - Ships mooring and towing fittings - Universal fairleads without upper roller
• ISO-13755 - Ships and marine technology - Ships mooring and towing fittings - Steel rollers
• ISO-13767 - Ships and marine technology - Ships mooring and towing fittings - Shipside roller fairleads
• ISO-13776 - Ships and marine technology - Ships mooring and towing fittings - Pedestal fairleads
• ISO-13795 - Ships and marine technology - Ships mooring and towing fittings - Welded steel bollards for sea-going vessels
• ISO-13797 - Ships and marine technology - Ships mooring and towing fittings - Cruciform bollards
• ISO-13798 - Ships and marine technology - Ships mooring and towing fittings - Recessed bitts (steel plate type)
• ISO-13799 - Ships and marine technology - Ships mooring and towing fittings - Recessed bitts (casting type)
• ISO-14612 - Ships and marine technology - Ships bridge layout and associated equipment - Additional requirements and guidelines for centralized and integrated bridge functions
• ISO-15516 - Ships and marine technology - Launching appliances for davit-launched lifeboats
• ISO-16855 - Ships and marine technology - Loose gear of lifting appliances on ships - General requirements
• ISO-16856 - Ships and marine technology - Loose gear of lifting appliances on ships - Hooks
• ISO-16857 - Ships and marine technology - Loose gear of lifting appliances on ships - Shackles
• ISO-16858 - Ships and marine technology - Loose gear of lifting appliances on ships - Pulleys
• ISO-1704 - Ships and marine technology - Stud-link anchor chains
• ISO-17899 - Ships and marine technology - Marine electric window wipers
• ISO-17905 - Ships and marine technology - Installation, inspection and maintenance of container securing devices for ships
• ISO-18289 - Ships and marine technology - Navigation and shallow-water engineering vessels - Anchor winches
• ISO-18296 - Ships and marine technology - Ship-shifting winches
• ISO-18824 - Ships and marine technology - Ships mooring and towing fittings - Horizontal roller fairleads
• ISO-21130 - Ships and marine technology - Major components of emergency towing arrangements
• ISO-21539 - Ships and marine technology - Testing specification for walkways using electrical resistance trace heating
• ISO-21711 - Marine structures - Mobile offshore units - Chain wheels
• ISO-21885 - Ships and marine technology - Testing specification for stairsteps using electrical resistance trace heating
• ISO-22419 - Ships and marine technology - Testing specification for handrails using electrical resistance trace heating
• ISO-22673 - Ships and marine technology - Launching appliances for free-fall lifeboats
• ISO-23113 - Ships and marine technology - Ships mooring and towing fittings - Seats for closed chocks
• ISO-23115 - Ships and marine technology - Ships mooring and towing fittings - Seats for mooring chocks
• ISO-23116 - Ships and marine technology - Ship.s mooring and towing fittings - Seats for Panama chocks
• ISO-24041 - Ships and marine technology - Shark jaws and towing pins
• ISO-24042 - Liquid cargo handling equipment - Crude oil offloading system .Tandem mooring winches
• ISO-24043 - Marine structures - Crude oil offloading systems - Hose reels
• ISO-24044 - Ships and marine technology - Deck machinery - Multifunctional manipulator
• ISO-24045 - Ships and marine technology - Adjustable roller-type chain stoppers
• ISO-24059 - Ships and marine technology - Anchor chain releasers
• ISO-24061 - Ships and marine technology - High holding power balance anchors
• ISO-24136 - Ships and marine technology - Pilot ladder winch reels
• ISO-24681 - Ships and marine technology - Fibre-reinforced plastic gratings
• ISO-29400 - Ships and marine technology - Offshore wind energy - Port and marine operations
• ISO-3730 - Shipbuilding and marine structures - Mooring winches
• ISO-3797 - Ships and marine technology - Vertical steel ladders
• ISO-3828 - Shipbuilding and marine structures - Deck machinery - Vocabulary and symbols
• ISO-4845 - Ships and marine technology - Combined rigging for deep-sea mooring
• ISO-4853 - Ships and marine technology - A-frame launch and recovery system
• ISO-4857 - Ships and marine technology - Test procedures and methods for windlasses and winches
• ISO-4861 - Ships and marine technology - Piling barge winches
• ISO-4862 - Ships and marine technology - Winches for trailing suction hopper dredger
• ISO-4864 - Ships and marine technology - Jacking system appliances on self-elevating unit - General requirements
• ISO-5488 - Ships and marine technology - Accommodation ladders
• ISO-5489 - Ships and marine technology - Embarkation ladders
• ISO-5528 - Ships and marine technology - Deep-sea hydraulic winch equipment
• ISO-5540 - Ships and marine technology - Sea-going vessels - Dual traction/stowage winches for oceanographic research
• ISO-5556 - Ships and marine technology - Sea-going vessels - Single-drum winches for oceanographic research
• ISO-5694 - Ships and marine technology - Deck covering
• ISO-6067 - Shipbuilding and marine structures -- Winches for lifeboats
• ISO-6115 - Shipbuilding -- Trawl winches
• ISO-6325 - Ships and marine technology - Cable stoppers
• ISO-6482 - Shipbuilding - Deck machinery - Warping end profiles
• ISO-6555 - Shipbuilding -- Topping winches
• ISO-7364 - Ships and marine technology - Deck machinery - Accommodation ladder winches
• ISO-7365 - Shipbuilding and marine structures - Deck machinery - Towing winches for deep sea use
• ISO-7825 - Shipbuilding - Deck machinery - General requirements
• ISO-799 - Ships and marine technology - Pilot ladders
• ISO-799-1 - Ships and marine technology - Pilot ladders - Part 1: Design and specification
• ISO-799-2 - Ships and marine technology - Pilot ladders - Part 2: Maintenance, use, survey, and inspection
• ISO-799-3 - Ships and marine technology - Pilot ladders - Part 3: Attachments and associated equipment
• ISO-9089 - Marine structures - Mobile offshore units - Mooring positioning windlasses and winches
• ISO-9519 - Ships and marine technology - Single rungs and rungs for dog-step ladders
• ISO-9557 - Ships and marine technology - Wire rope lifting platform for inspection
• ISO/DIS-22673 - Ships and Marine Technology - Launching Appliances for Free-Fall Lifeboats

Other SDOs:

• DIN-EN-14606 - Inland Navigation Vessels, Studless Anchor Chain, Accessories
• DIN-EN-14874 - Inland Navigation Vessels - Studless Anchor Chain - Cable Lifter
• DIN-EN-14965 - Inland Navigation Vessels - Flat Bollards
• DIN-EN-15271 - Inland Navigation Vessels - Studless Anchor Chain - Anchor Equipment
• DIN-EN-15272-2 - Part 2: Fairlead, Inland Navigation Vessels - Equipment for Rope Leading
• DIN-EN-ISO-6218 - Inland navigation vessels - Manually- and power-operated coupling devices for pushing units and coupled vessels - Safety requirements and main dimensions
• EN-12339 - Inland Navigation Vessels, Rope Tubs
• EN-13573 - Inland Navigation Vessels, Anchoring, Coupling, Towing, Haulling & Mooring Systems
• EN-14606 - Inland Navigation Vessels, Studless Anchor Chain, Accessories
• EN-14874 - Inland Navigation Vessels - Studless Anchor Chain - Cable Lifter
• EN-14965 - Inland Navigation Vessels - Flat Bollards
• EN-15271 - Inland Navigation Vessels - Studless Anchor Chain - Anchor Equipment
• EN-15272-1 - Inland Navigation Vessels, Equipment for Rope Leading, General Requirements
• EN-15272-2 - Part 2: Fairlead, Inland Navigation Vessels - Equipment for Rope Leading
• EN-15272-3 - Inland Navigation Vessels, Equipment for Rope Leading, Roller Fairleads
• EN-15272-4 - Inland Navigation Vessels, Equipment for Rope Leading, Rope Lead
• EN-1864 - Inland Navigation Vessels, Wheelhouse, Ergonomic & Safety Requirements
• EN-ISO-6218 - Inland navigation vessels - Manually- and power-operated coupling devices for pushing units and coupled vessels - Safety requirements and main dimensions
• JIS-F-2029 - Towing and mooring brackets
• SS-780001 - Shipbuilding - Bollards
• SS-780002 - Shipbuilding - Fairleads for bulwark
• SS-780003 - Shipbuilding - Fairleads with foundation
• SS-780038 - Shipbuilding - Roller fairleads
• SS-780047 - Shipbuilding - Handle
• SS-780236 - Shipbuilding - Sloping ladders and guard rails inengine and pumps rooms - Directions for design and application
• SS-780238 - Shipbuilding - Jointing sleevers for guard rails in engine and pump rooms
• SS-780245 - Shipbuilding - Trim- and stability book for ships- Forms
• SS-780246 - Shipbuilding - Trim- and stability book for ships- Guide for calculations
• SS-780247 - Shipbuilding - Lugs with one hole
• SS-780249 - Shipbuilding - Guard rails and steel ladders on deck - Directions for design and assembly
• SS-780250 - Shipbuilding - Stanchions for guard rails on deck
• SS-780251 - Shipbuilding - Stay for guard rails on deck
• SS-780252 - Shipbuilding - Gates in guard rails on deck
• SS-780254 - Shipbuilding - Lug for hand rail
• SS-780255 - Shipbuilding - Sloping steel ladders
• SS-780258 - Shipbuilding - Treads
• SS-780326 - Shipbuilding - Lifting eye with clip
• SS-780421 - Shipbuilding - Lugs
• SS-780422 - Shipbuilding - Pilot ladders
• SS-780423 - Shipbuilding - Embarkation ladders
• SS-780424 - Shipbuilding - Pilot ladder - Passage on and off the ship
• SS-780445 - Shipbuilding - Lug of angle bar
• SS-780446 - Shipbuilding - Attachment
• SS-780450 - Shipbuilding - Sloping ladders and guard rails incargo tanks and cargo holds - Directions for design and application
• SS-780451 - Shipbuilding - Vertical ladders in cargo holds, peaktanks and similar spaces - Directions for design and application
• SS-780452 - Shipbuilding - Hoop guards, fixed
• SS-780455 - Shipbuilding - Sloping steel ladder of angle bar,inclination 70 degrees
• SS-780456 - Shipbuilding - Vertical steel ladders of angle bar
• SS-780457 - Shipbuilding - Step in coaming
• SS-780458 - Shipbuilding - Steps
• SS-780459 - Shipbuilding - Rungs
• SS-780460 - Shipbuilding - Landings, RK
• SS-780461 - Shipbuilding - Landings, RL
• SS-780462 - Shipbuilding - Landings, KA
• SS-780464 - Shipbuilding - Landings, KC
• SS-780465 - Shipbuilding - Landings, KD
• SS-780466 - Shipbuilding - Vertical steel ladder of flat bar
• SS-780478 - Shipbuilding - Pedestals for roller fairleads
• SS-780479 - Shipbuilding - Eyes
• SS-780493 - Shipbuilding - Securing device
• SS-780494 - Shipbuilding - Stanchions for guard rails in engine and pump rooms and cargo tanks and cargo holds
• SS-780496 - Shipbuilding - Round eye plates
• SS-780504 - Shipbuilding - Racks for stowage of embarkation ladder
• SS-780555 - Shipbuilding - Fork lug for toggle bolts
• SS-780556 - Shipbuilding - U-logs for toggle bolts
• SS-780798 - Shipbuilding - Expansion elements for guard railson deck
• SS-780800 - Shipbuilding - Hoop guard, detachable
• SS-780801 - Shipbuilding - Guard rails for 70 degrees slopingladder of angle bar
• SS-780802 - Shipbuilding - Ending of guard rail for ladders
• SS-780803 - Shipbuilding - Chain gates in guard rails on deck
• SS-780804 - Shipbuilding - Distribution lug
• SS-780805 - Shipbuilding - Sloping ladders of angle bar, inclination 55 degrees, 60 degrees and 65 degrees
• SS-780816 - Shipbuilding - Ships' rectangular windows, opening inwards, bolted models
• SS-780823 - Shipbuilding - Ships' rectangular windows with deadlight, non-opening, bolted models
• SS-780849 - Shipbuilding - Lining frames for ships' side scuttles
• SS-780988 - Shipbuilding - Cruciform bollards
• SS-780989 - Shipbuilding - Fairleads with pedestal
• SS-782016 - Shipbuidling - Bracket with two holes
• SS-782017 - Shipbuilding - Guard rails for sloping steel ladders
• SS-782042 - Shipbuilding - Fairleads, welded
• SS-789003 - Shipbuilding - Mooring equipment - Summary, installation and general considerations
• SS-EN-12339 - Inland navigation vessels - Tope tubs
• SS-EN-13573 - Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems
• SS-EN-13574 - Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m
• SS-EN-13711 - Inland navigation vessels - Winches for ship operation - Safety requirements
• SS-EN-14606 - Inland navigation vessels - Studless anchor chain - Accessories
• SS-EN-14874 - Inland navigation vessels - Studless anchor chain - Cable lifter
• SS-EN-14965 - Inland navigation vessels - Flat bollards
• SS-EN-15271 - Inland navigation vessels - Studless anchor chain - Anchor equipment
• SS-EN-15272-1 - Inland navigation vessels - Equipment for rope leading - Part 1: General requirements
• SS-EN-15272-2 - Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead
• SS-EN-15272-3 - Inland navigation vessels - Equipment for rope leading - Part 3: Roller fairleads
• SS-EN-15272-4 - Inland navigation vessels - Equipment for rope leading - Part 4: Rope lead
• SS-EN-1864 - Inland navigation vessels - Wheelhouse - Ergonomic and safety requirements
• SS-EN-24565 - Small craft - Anchor chains
• SS-EN-29519 - Shipbuilding and marine structures - Rungs for dog-step ladders (ISO 9519:1990)
• SS-EN-790 - Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements, types
• SS-EN-ISO-6218 - Inland navigation vessels - Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2019)
• SS-EN-ISO-9519 - Ships and marine technology - Single rungs and rungs for dog-step ladders (ISO 9519:2023)
• SS-ISO-13617 - Ships and marine technology - Shipboard incinerators - Requirements (ISO 13617:2019, IDT)
• SS-ISO-13713 - Ships and marine technology - Ship's mooring and towing fittings - Mooring chocks (ISO 13713:2020, IDT)
• SS-ISO-13728 - Ships and marine technology - Ship's mooring and towing fittings - Panama chocks (ISO 13728:2020, IDT)
• SS-ISO-13729 - Ships and marine technology - Ship's mooring and towing fittings - Closed chocks (ISO 13729:2020, IDT)
• SS-ISO-13733 - Ships and marine technology - Ship's mooring and towing fittings - Universal fairleads with upper roller (ISO 13733:2020, IDT)
• SS-ISO-13742 - Ships and marine technology - Ship's mooring and towing fittings - Universal fairleads without upper roller (ISO 13742:2020, IDT)
• SS-ISO-13755 - Ships and marine technology - Ship's mooring and towing fittings - Steel rollers (ISO 13755:2020, IDT)
• SS-ISO-13767 - Ships and marine technology - Ship's mooring and towing fittings - Shipside roller fairleads (ISO 13767:2020, IDT)
• SS-ISO-13776 - Ships and marine technology - Ship's mooring and towing fittings - Pedestal fairleads (ISO 13776:2020, IDT)
• SS-ISO-13795 - Ships and marine technology - Ship's mooring and towing fittings - Welded steel bollards for sea-going vessels (ISO 13795:2020, IDT)
• SS-ISO-13797 - Ships and marine technology - Ship's mooring and towing fittings - Cruciform bollards (ISO 13797:2020, IDT)
• SS-ISO-13798 - Ships and marine technology - Ship's mooring and towing fittings - Recessed bitts (steel plate type) (ISO 13798:2020, IDT)
• SS-ISO-13799 - Ships and marine technology - Ship's mooring and towing fittings - Recessed bitts (casting type) (ISO 13799:2020, IDT)
• SS-ISO-23113 - Ships and marine technology - Ship's mooring and towing fittings - Seats for closed chocks (ISO 23113:2020, IDT)
• SS-ISO-23115 - Ships and marine technology - Ship's mooring and towing fittings - Seats for mooring chocks (ISO 23115:2020, IDT)
• SS-ISO-23116 - Ships and marine technology - Ship’s mooring and towing fittings - Seats for Panama chocks (ISO 23116:2020, IDT)
• SS-ISO-24041 - Ships and marine technology - Shark jaw and towing pins (ISO 24041:2020, IDT)
• SS-ISO-24042 - Liquid cargo handling equipment - Crude oil offloading system —Tandem mooring winches (ISO 24042:2020, IDT)
• SS-ISO-24043 - Marine structures - Crude oil offloading systems - Hose reels (ISO 24043:2020, IDT)
• SS-ISO-24044 - Ships and marine technology - Deck machinery - Multifunctional manipulator (ISO 24044:2020, IDT)
• SS-ISO-3434 - Shipbuilding and marine structures - Heated glasspanes for ships' rectangular windows
• SS-ISO-3500 - Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installation on ships (ISO 3500:2005, IDT)
• SS-ISO-3500-AM1 - Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installation on ships (ISO 3500:2005/Amd 1:2010, IDT)
• SS-ISO-4565 - Small craft - Anchor chains
• SS-ISO-5489 - Ships and marine technology - Embarkation ladders (ISO 5489:2008, IDT)
• SS-ISO-799 - Ships and marine technology - Pilot ladders (ISO 799:2004, IDT)
• SS-ISO-799-1 - Ships and marine technology - Pilot ladders - Part 1: Design and specification (ISO 799-1:2019, IDT)
• UNE-EN-ISO-6218 - Inland navigation vessels - Manually- and power-operated coupling devices for pushing units and coupled vessels - Safety requirements and main dimension