Document Center List of Standards on Rails And Railway Components Including Track Components
ICS Code 45.080
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
BSI:
- BS-11 - Specification for dimensional properties and associated tolerances of railway rails
- BS-11-TC - Tracked Changes. Specification for dimensional properties and associated tolerances of railway rails
- BS-4521-1.1 - Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using bull head rails
- BS-4521-1.2 - Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using flat bottom rail
- BS-4521-2 - Specification for railway turnouts for private users. Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails
- BS-4521-3.1 - Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons. Turnouts using bull head rail
- BS-4521-3.2 - Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons. Turnouts using flat bottom rails
- BS-4521-4 - Specification for railway turnouts for private users. Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails
- BS-456 - Specification for dimensions of track circuit insulation
- BS-47-1 - Fishplates for railway rails
- BS-500 - Steel sleepers
- BS-64 - Specification for normal and high strength steel bolts and nuts for railway rail fishplates
- BS-751 - Specification for Steel Baseplates for Flat Bottom Railway Rails
- BS-EN-13146-1 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13146-2 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13146-3 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13146-4 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13146-5 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13146-6 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13146-7 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13146-8 - Railway applications. Track. Test methods for fastening systems
- BS-EN-13230-1 - Railway applications. Track. Concrete sleepers and bearers
- BS-EN-13230-2 - Railway applications. Track. Concrete sleepers and bearers
- BS-EN-13230-2-TC - Tracked Changes. Railway applications. Track. Concrete sleepers and bearers
- BS-EN-13230-3 - Railway applications. Track. Concrete sleepers and bearers
- BS-EN-13230-4 - Railway applications. Track. Concrete sleepers and bearers
- BS-EN-13230-5 - Railway applications. Track. Concrete sleepers and bearers
- BS-EN-13231-2 - Railway applications. Track. Acceptance of works
- BS-EN-13231-3 - Railway applications. Track. Acceptance of works
- BS-EN-13232-2 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13232-3 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13232-4 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13232-5 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13232-6 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13232-7 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13232-8 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13232-9 - Railway applications. Track. Switches and crossings for Vignole rails
- BS-EN-13674-1 - Railway applications. Track. Rail
- BS-EN-13674-2 - Railway applications. Track. Rail
- BS-EN-13674-4 - Railway applications. Track. Rail
- BS-EN-13803-2 - Railway applications. Track. Track alignment design parameters. Track gauges 1435 mm and wider. Switches and crossings and comparable alignment design situations with abrupt changes of curvature
- BS-EN-13848-1 - Railway applications. Track. Track geometry quality
- BS-EN-13848-3 - Railway applications. Track. Track geometry quality
- BS-EN-14587-1 - Railway applications. Infrastructure. Flash butt welding of new rails
- BS-EN-14587-1-TC - Tracked Changes. Railway applications. Infrastructure. Flash butt welding of new rails
- BS-EN-14730-1 - Railway applications. Track. Aluminothermic welding of rails
- BS-EN-14730-1-TC - Tracked Changes. Railway applications. Track. Aluminothermic welding of rails
- BS-EN-14730-2 - Railway applications. Track. Aluminothermic welding of rails
- BS-EN-14811 - Railway applications. Track. Special purpose rail. Grooved rails and associated construction profiles
- BS-EN-15461 - Railway applications. Noise emission. Characterization of the dynamic properties of track selections for pass by noise measurements
- BS-EN-ISO-22074-1 - Railway infrastructure. Rail fastening systems
- BS-EN-ISO-22074-2 - Railway infrastructure. Rail fastening systems
- BS-EN-ISO-22074-3 - Railway infrastructure. Rail fastening systems
- BS-EN-ISO-22074-4 - Railway infrastructure. Rail fastening systems
- BS-EN-ISO-22074-5 - Railway infrastructure. Rail fastening systems
- BS-EN-ISO-22074-6 - Railway infrastructure. Rail fastening systems
- BS-EN-ISO-22074-7 - Railway infrastructure. Rail fastening systems
- BS-ISO-12856-1 - Railway applications. Polymeric composite sleepers, bearers and transoms
- BS-ISO-12856-2 - Railway applications. Polymeric composite sleepers, bearers and transoms
- BS-ISO-12856-3 - Railway applications. Polymeric composite sleepers, bearers and transoms
- BS-ISO-14837-1 - Mechanical vibration. Ground-borne noise and vibration arising from rail systems
- BS-ISO-6305-2 - Railway components. Technical delivery requirements
- DD-ENV-13481-6 - Railway applications. Track. Performance requirements for fastening systems. Special fastening systems for attenuation of vibration
- DD-ENV-13803-1 - Railway Applications, Track Alignment Design Parameters, Track Gauges 1435 mm & Wider,
- ISO-12856-2 - Railway applications - Polymeric composite sleepers, bearers and transoms - Part 2: Product testing
- PD-CEN-15427-1-2 - Railway applications. Wheel/rail friction management
- PD-CEN-15427-1-2-TC - Tracked Changes. Railway applications. Wheel/rail friction management
- PD-CEN-15427-2-2 - Railway applications. Wheel/rail friction management
- PD-CEN-15427-2-2-TC - Tracked Changes. Railway applications. Wheel/rail friction management
- PD-ISO-14837-32 - Mechanical vibration. Ground-borne noise and vibration arising from rail systems
ISO:
- ISO-12856-1 - Railway applications - Polymeric composite sleepers, bearers and transoms - Part 1: Material characteristics
- ISO-12856-3 - Railway applications - Polymeric composite sleepers, bearers and transoms - Part 3: General requirements
- ISO-14837-1 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 1: General guidance
- ISO-14837-31 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
- ISO-14837-32 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 32: Measurement of dynamic properties of the ground
- ISO-22055 - Switch and crossing rails
- ISO-22074-1 - Railway infrastructure - Rail fastening systems - Part 1: Vocabulary
- ISO-22074-2 - Railway infrastructure - Rail fastening systems - Part 2: Test method for longitudinal rail restraint
- ISO-22074-3 - Railway infrastructure - Rail fastening systems - Part 3: Proof load test method for pull-out resistance
- ISO-22074-4 - Railway infrastructure - Rail fastening systems - Part 4: Test methods for resistance to repeated loading
- ISO-22074-6 - Railway infrastructure - Rail fastening systems - Part 6: Test method for resistance to severe environmental conditions
- ISO-22074-7 - Railway infrastructure - Rail fastening systems - Part 7: Test method for clamping force and uplift stiffness
- ISO-22074-8 - Railway infrastructure - Rail fastening systems - Part 8: Test method for vertical stiffness
- ISO-22480-1 - Railway applications - Concrete sleepers and bearers for track - Part 1: General requirements
- ISO-22480-2 - Railway applications - Concrete sleepers and bearers for track - Part 2: Prestressed monoblock sleepers
- ISO-23054-1 - Railway applications - Track geometry quality - Part 1: Characterization of track geometry and track geometry quality
- ISO-23300-1 - Railway infrastructure - Rail welding - Part 1: General requirements and test methods for rail welding
- ISO-5003 - Flat bottom (Vignole) railway rails 43 kg/m and above
- ISO-5735-1 - Railway infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic testing and evaluation principles
- ISO-6305-2 - Railway components - Technical delivery requirements - Part 2: Non-alloy carbon steel baseplates
- ISO-6305-3 - Railway components -- Technical delivery requirements -- Part 3: Steel sleepers
- ISO-6305-4 - Railway components -- Technical delivery requirements -- Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
Other SDOs:
- DIN-EN-13230-2 - Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers; German version EN 13230-2:2016
- DIN-EN-13230-3 - Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers; German version EN 13230-3:2016
- DIN-EN-13230-4 - Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings; German version EN 13230-4:2016
- DIN-EN-13230-5 - Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements; German version EN 13230-5:2016
- DIN-EN-13232-2 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design
- DIN-EN-13232-3 - Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction
- DIN-EN-13232-4 - Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection
- DIN-EN-13232-5 - Railway applications - Track - Switches and crossings - Part 5: Switches
- DIN-EN-13232-6 - Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings
- DIN-EN-13232-7 - Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts
- DIN-EN-13232-8 - Railway applications - Track - Switches and crossings - Part 8: Expansion devices
- DIN-EN-13232-9 - Railway applications - Track - Switches and crossings - Part 9: Layouts
- DIN-EN-13674-1 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above; German version EN 13674-1:2011+A1:2017
- DIN-EN-14811 - Railway applications - Track - Special purpose rail - Grooved and associated construction; German version EN 14811:2006+A1:2009
- DS-EN-13481-7 - Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails
- EN-13230-1 - Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
- EN-13230-2 - Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers
- EN-13230-3 - Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
- EN-13230-4 - Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings
- EN-13230-5 - Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements
- EN-13231-2 - Part 2: Works on Ballasted Track - Switches & Crossings, Railway Applications - Track
- EN-13232-3 - Part 3: Requirements for Wheel/Rail Interaction, Railway Applications, Track - Switche
- EN-13232-4 - Part 4: Actuation, Locking & Detection, Railway Applications - Track - Switches & Cros
- EN-13232-5 - Part 5: Swithces, Railway Applications - Track - Switches & Crossings
- EN-13232-6 - Part 6: Fixed Common & Obtuse Crossings, Railway Applications - Track - Switches & Cro
- EN-13232-7 - Part 7: Crossings With Moveable Parts, Railway Applications - Track - Switches & Cros
- EN-13232-8 - Part 8: Expansion Devices, Railway Applications - Track - Switches & Crossings
- EN-13232-9 - Part 9: Layouts, Railway Applications - Track - Switches & Crossings
- EN-13674-1 - Part 1: Vignole Railway Rails 46 kg/m & Above, Railway Applications - Track - Rail
- EN-13674-2 - Part 2: Switch & Crossing Rails Used in Conjunction With Vignole Railway Rails 46 kg/m
- EN-13674-4 - Part 4: Vignole Railway Rails From 27 kg/m To, but Excluding 46 kg/m, Railway Applicat
- EN-13803-2 - Part 2: Switches & Crossings & Comparable Alignment Design Situations With Abrupt Chan
- EN-13848-1 - Part 1: Characterization of Track Geometry, Railway Applications - Track - Track Geome
- EN-13848-3 - Part 3: Measuring Systems - Track Construction & Maintenance Machines, Railway Applica
- EN-14587-1 - Part 1: New R220, R260, R260Mn & R350Ht Grade Rails in a Fixed Plant, Railway Applicat
- EN-14730-1 - Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes
- EN-14730-2 - Part 2: Qualification of Aluminothermic Welders, Approval of Contractors & Acceptance
- EN-14811 - Railway Applications - Track - Special Purpose Rail - Grooved & Associated Constructio
- EN-15461 - Railway Applications - Noise Emission - Characterization of the Dynamic Properties Of
- JIS-E-1101 - Flat bottom railway rails and special rails for switches and crossings of non-treated steel
- JIS-E-1102 - Fish plates for rails
- JIS-E-2002 - Electric traction overhead lines -- Fittings -- Test methods
- JIS-E-2201 - Electric Traction Overhead Lines - Fittings
- SS-EN-13135-1 - Cranes - Equipment - Part 1: Electrotechnical equipment
- SS-EN-13230-1 - Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
- SS-EN-13230-2 - Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers
- SS-EN-13230-3 - Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
- SS-EN-13230-4 - Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings
- SS-EN-13230-5 - Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements
- SS-EN-13230-6 - Railway applications - Track - Concrete sleepers and bearers - Part 6: Design
- SS-EN-13231-1 - Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings
- SS-EN-13231-2 - Railway applications - Track - Acceptance of works - Part 2: Acceptance of reprofiling rails in plain line, switches, crossings and expansion devices
- SS-EN-13231-3 - Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
- SS-EN-13231-4 - Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
- SS-EN-13231-5 - Railway applications - Track - Acceptance of works - Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices
- SS-EN-13232-1 - Railway applications - Track - Switches and crossings for Vignole rails - Part 1: Definitions
- SS-EN-13232-2 - Railway applications - Track - Switches and crossings for Vignole rails - Part 2: Requirements for geometric design
- SS-EN-13232-3 - Railway applications - Track - Switches and crossings for Vignole rails - Part 3: Requirements for wheel/rail interaction
- SS-EN-13232-4 - Railway applications - Track - Switches and crossings for Vignole rails - Part 4: Actuation, locking and detection
- SS-EN-13232-5 - Railway applications - Track - Switches and crossings for Vignole rails - Part 5: Switches
- SS-EN-13232-6 - Railway applications - Track - Switches and crossings for Vignole rails - Part 6: Fixed common and obtuse crossings
- SS-EN-13232-7 - Railway applications - Track - Switches and crossings for Vignole rails - Part 7: Crossings with moveable parts
- SS-EN-13232-8 - Railway applications - Track - Switches and crossings for Vignole rails - Part 8: Expansion devices
- SS-EN-13232-9 - Railway applications - Track - Switches and crossings for Vignole rails - Part 9: Layouts
- SS-EN-13481-2 - Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers in ballast
- SS-EN-13481-5 - Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for ballastless tracks
- SS-EN-13674-1 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
- SS-EN-13674-2 - Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
- SS-EN-13674-4 - Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
- SS-EN-13803 - Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider
- SS-EN-13803-1 - Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line
- SS-EN-13803-2 - Railway applications - Track -Track alignment design parameters - Track gauges 1 435 mm and wider - Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature
- SS-EN-13848-1 - Railway applications - Track - Track geometry quality - Part 1: Characterization of track geometry
- SS-EN-14535-1 - Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
- SS-EN-14535-2 - Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
- SS-EN-14730-1 - Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes
- SS-EN-14730-2 - Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds
- SS-EN-14811 - Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles
- SS-EN-15153-1 - Railway applications - External visible and audible warning devices - Part 1: Head, marker and tail lamps for heavy rail
- SS-EN-15220 - Railway applications - Brake indicators
- SS-EN-15273-1 - Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock
- SS-EN-15273-2 - Railway applications - Gauges - Part 2: Rolling stock gauge
- SS-EN-15273-3 - Railway applications - Gauges - Part 3: Structure gauges
- SS-EN-15461 - Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
- SS-EN-15566 - Railway applications - Railway Rolling stock - Draw gear and screw coupling
- SS-EN-16704-2-1 - Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
- SS-EN-16704-2-2 - Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers
- SS-EN-16704-3 - Railway applications - Track - Safety protection on the track during work - Part 3: Competences for personnel related to work on or near tracks
- SS-EN-16725 - Railway applications - Track - Restoration and repair of manganese crossings
- SS-EN-17069-1 - Railway applications - Systems and procedures for change of track gauge - Part 1: Automatic Variable Gauge Systems
- SS-ENV-13803-1 - Railway applications - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line
- SS-ISO-12856-1 - Railway applications Polymeric composite sleepers, bearers and transoms Part 1: Material characteristics (ISO 12856-1:2022, IDT)
- SS-ISO-12856-2 - Railway applications Polymeric composite sleepers, bearers and transoms Part 2: Product testing (ISO 12856-2:2020, IDT)
- SS-ISO-12856-3 - Railway applications Polymeric composite sleepers, bearers and transoms Part 3: General requirements (ISO 12856-3:2022, IDT)
- SS-ISO-14837-1 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 1: General guidance (ISO 14837-1:2005, IDT)
- SS-ISO-22074-1 - Railway infrastructure - Rail fastening systems - Part 1: Vocabulary (ISO 22074-1:2020, IDT)
- SS-ISO-22074-2 - Railway infrastructure Rail fastening systems Part 2: Test method for longitudinal rail restraint (ISO 22074-2:2021, IDT)
- SS-ISO-22074-3 - Railway infrastructure Rail fastening systems Part 3: Proof load test method for pull-out resistance (ISO 22074-3:2021, IDT)
- SS-ISO-22074-4 - Railway applications - Infrastructure - Rail fastening systems - Part 4: Test procedure for repeated loading (ISO 22074-4:2022, IDT)
- SS-ISO-22074-5 - Railway infrastructure Rail fastening systems Part 5: Test method for electrical resistance (ISO 22074-5:2021, IDT)
- SS-ISO-22074-6 - Railway infrastructure Rail fastening systems Part 6: Test method for resistance to severe environmental conditions (ISO 22074-6:2021, IDT)
- SS-ISO-22074-7 - Railway infrastructure Rail fastening systems Part 7: Test method for clamping force and uplift stiffness (ISO 22074-7:2021, IDT)
- SS-ISO-22480-1 - Railway applications Concrete sleepers and bearers for track Part 1: General requirements (ISO 22480-1:2022, IDT)
- SS-ISO-22480-2 - Railway applications Concrete sleepers and bearers for track Part 2: Prestressed monoblock sleepers (ISO 22480-2:2022, IDT)
- SS-ISO-23054-1 - Railway applications - Track geometry quality - Part 1: Characterisation of track geometry and track geometry quality (ISO 23054-1:2022, IDT)
- SS-ISO-23300-1 - Railway infrastructure Rail welding Part 1: General requirements and test methods for rail welding (ISO 23300-1:2021, IDT)