Document Center List of Standards on Railway Rolling Stock In General
ICS Code 45.060.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-857 - Specification for safety glass for land transport
- BS-EN-12663 - Railway applications. Structural requirements of railway vehicle bodies
- BS-EN-13149-2 - Public transport. Road vehicle scheduling and control systems
- BS-EN-13272 - Railway applications. Electrical lighting for rolling stock in public transport systems
- BS-EN-13272-1 - Railway applications. Electrical lighting for rolling stock in public transport systems
- BS-EN-13298 - Railway applications. Suspension components. Helical suspension springs, steel
- BS-EN-13597 - Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
- BS-EN-14067-2 - Railway applications. Aerodynamics
- BS-EN-14067-3 - Railway applications. Aerodynamics
- BS-EN-14067-4 - Railway applications. Aerodynamics
- BS-EN-14067-4-TC - Tracked Changes. Railway applications. Aerodynamics
- BS-EN-14067-5 - Railway applications. Aerodynamics
- BS-EN-14067-6 - Railway applications. Aerodynamics
- BS-EN-14067-6-TC - Tracked Changes. Railway applications. Aerodynamics
- BS-EN-14198 - Railway applications. Braking. Requirements for the brake system of trains hauled by locomotives
- BS-EN-14363 - Railway applications. Testing and Simulation for the acceptance of running characteristics of railway vehicles. Running Behaviour and stationary tests
- BS-EN-14478 - Railway applications. Braking. Generic vocabulary
- BS-EN-14478-TC - Tracked Changes. Railway applications. Braking. Generic vocabulary
- BS-EN-14531-1 - Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking
- BS-EN-14531-2 - Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking
- BS-EN-14531-2-TC - Tracked Changes. Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking
- BS-EN-14531-6 - Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking
- BS-EN-14535-1 - Railway applications. Brake discs for railway rolling stock
- BS-EN-14535-3 - Railway applications. Brake discs for railway rolling stock
- BS-EN-14601 - Railway applications. Straight and angled end cocks for brake pipe and main reservoir pipe
- BS-EN-14750-1 - Railway applications. Air conditioning for urban and suburban rolling stock
- BS-EN-14750-2 - Railway applications. Air conditioning for urban and suburban rolling stock
- BS-EN-14752 - Railway applications. Bodyside entrance systems for rolling stock
- BS-EN-15020 - Railway applications. Rescue coupler. Performance requirements, specific interface geometry and test methods
- BS-EN-15020-TC - Tracked Changes. Railway applications. Rescue coupler. Performance requirements, specific interface geometry and test methods
- BS-EN-15049 - Railway applications. Suspension components. Torsion bar, steel
- BS-EN-15085-1 - Railway applications. Welding of railway vehicles and components
- BS-EN-15085-2 - Railway applications. Welding of railway vehicles and components
- BS-EN-15085-3 - Railway applications. Welding of railway vehicles and components
- BS-EN-15085-3-TC - Tracked Changes. Railway applications. Welding of railway vehicles and components
- BS-EN-15085-4 - Railway applications. Welding of railway vehicles and components
- BS-EN-15085-4-TC - Tracked Changes. Railway applications. Welding of railway vehicles and components
- BS-EN-15085-5 - Railway applications. Welding of railway vehicles and components
- BS-EN-15085-5-TC - Tracked Changes. Railway applications. Welding of railway vehicles and components
- BS-EN-15085-6 - Railway applications. Welding of railway vehicles and components
- BS-EN-15220 - Railway applications. Brake indicators
- BS-EN-15220-1 - Railway applications. Brake indicators. Pneumatically operated brake indicators
- BS-EN-15273-1 - Railway applications. Gauges
- BS-EN-15273-2 - Railway applications. Gauges
- BS-EN-15273-3 - Railway applications. Gauges
- BS-EN-15302 - Railway applications. Wheel-rail contact geometry parameters. Definitions and methods for evaluation
- BS-EN-15327-1 - Railway applications. Passenger alarm subsystem
- BS-EN-15329 - Railway applications. Braking. Brake block holder and brake block key
- BS-EN-15355 - Railway applications. Braking. Distributor valves and distributor-isolating devices
- BS-EN-15380-1 - Railway applications. Designation system for railway vehicles
- BS-EN-15380-2 - Railway applications. Designation systemat for railway vehicles
- BS-EN-15380-3 - Railway applications. Designation system for railway vehicles
- BS-EN-15380-4 - Railway applications. Classification system for railway vehicles
- BS-EN-15380-5 - Railway applications. Classification system for railway vehicles
- BS-EN-15437-1 - Railway applications. Axlebox condition monitoring. Interface and design requirements
- BS-EN-15437-2 - Railway applications .Axlebox condition monitoring.Interface and design requirements
- BS-EN-15551 - Railway applications. Railway rolling stock. Buffers
- BS-EN-15551-TC - Tracked Changes. Railway applications. Railway rolling stock. Buffers
- BS-EN-15566 - Railway applications. Railway Rolling stock. Draw gear and screw coupling
- BS-EN-15595 - Railway applications. Braking. Wheel slide protection
- BS-EN-15595-TC - Tracked Changes. Railway applications. Braking. Wheel slide protection
- BS-EN-15611 - Railway applications. Braking. Relay valves
- BS-EN-15612 - Railway applications. Braking. Brake pipe accelerator
- BS-EN-15624 - Railway applications. Braking. Empty-loaded changeover devices
- BS-EN-15625 - Railway applications. Braking. Automatic variable load sensing devices
- BS-EN-15654-1 - Railway applications. Measurement of vertical forces on wheels and wheelsets
- BS-EN-15654-2 - Railway applications. Measurement of vertical forces on wheels and wheelsets
- BS-EN-15663 - Railway applications. Vehicle reference masses
- BS-EN-15686 - Railway applications. Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G
- BS-EN-15687 - Railway applications. Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN
- BS-EN-15734-1 - Railway applications. Braking systems of high speed trains
- BS-EN-15734-2 - Railway applications. Braking systems of high speed trains
- BS-EN-15827-2 - Part 2: Structural Requirements, Railway Applications, Bogies & Running Gear
- BS-EN-16207 - Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
- BS-EN-16207-TC - Tracked Changes. Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
- BS-EN-16334 - Railway applications. Passenger Alarm System. System requirements
- BS-EN-16404 - Railway applications. Re-railing and recovery requirements for railway vehicles
- BS-EN-16404-TC - Tracked Changes. Railway applications. Re-railing and recovery requirements for railway vehicles
- BS-EN-16452 - Railway applications. Braking. Brake blocks
- BS-EN-16683 - Railway applications. Call for aid and communication device. Requirements
- BS-EN-17018 - Railway applications. Rolling stock maintenance. Terms and definitions
- BS-EN-17023 - Railway applications. Railway vehicle maintenance. Creation and modification of maintenance plan
- BS-EN-17065 - Railway applications. Braking. Passenger coach test procedure
- BS-EN-17084 - Railway applications. Fire protection on railway vehicles. Toxicity test of materials and components
- BS-EN-17095 - Railway applications. Rolling stock maintenance. Maintenance records
- BS-EN-17149-1 - Railway applications. Strength assessment of rail vehicle structures
- BS-EN-17149-2 - Railway applications. Strength assessment of rail vehicle structures
- BS-EN-17343 - Railway application. General terms and definitions
- BS-EN-17355 - Railway applications. Communication device for urban rail. System requirements
- BS-EN-17460 - Railway applications. Adhesive bonding of rail vehicles and their components
- BS-EN-17530 - Railway applications. Interior glazing for rail vehicles
- BS-EN-45545-1 - Railway applications. Fire protection on railway vehicles
- BS-EN-45545-2 - Railway applications. Fire protection on railway vehicles
- BS-EN-45545-3 - Railway applications. Fire protection on railway vehicles
- BS-EN-45545-3-TC - Tracked Changes. Railway applications. Fire protection on railway vehicles
- BS-EN-45545-4 - Railway applications. Fire protection on railway vehicles
- BS-EN-45545-4-TC - Tracked Changes. Railway applications. Fire protection on railway vehicles
- BS-EN-45545-5 - Railway applications. Fire protection on railway vehicles
- BS-EN-45545-6 - Railway applications. Fire protection on railway vehicles
- BS-EN-45545-7 - Railway applications. Fire protection on railway vehicles
- BS-EN-50121-3-1 - Railway applications. Electromagnetic compatibility
- BS-EN-50121-3-2 - Railway applications. Electromagnetic compatibility
- BS-EN-50121-3-2-TC - Railway applications. Electromagnetic compatibility
- BS-EN-50155 - Railway applications. Rolling stock. Electronic equipment
- BS-EN-50155-TC - Tracked Changes. Railway applications. Rolling stock. Electronic equipment
- BS-EN-50206-2 - Railway applications. Rolling stock. Pantographs. Characteristics and tests
- BS-EN-50215 - Railway applications Rolling stock Testing of rolling stock on completion of construction and before entry into service
- BS-EN-50264-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
- BS-EN-50264-2 - Railway Applications, Railway Rolling Stock Cables Having Special Fire Performance, St
- BS-EN-50264-2-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
- BS-EN-50264-2-2 - Railway applications. Railway rolling stock power and control cables having special fire performance
- BS-EN-50264-3 - Railway Applications, Railway Rolling Stock Cables Having Special Fire Performance, St
- BS-EN-50264-3-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
- BS-EN-50264-3-2 - Railway applications. Railway rolling stock power and control cables having special fire performance
- BS-EN-50305 - Railway applications. Railway rolling stock cables having special fire performance. Test methods
- BS-EN-50306-1 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
- BS-EN-50306-2 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
- BS-EN-50306-3 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
- BS-EN-50306-4 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
- BS-EN-50311 - Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
- BS-EN-50343 - Railway applications. Rolling stock. Rules for installation of cabling
- BS-EN-50382-1 - Railway applications. Railway rolling stock high temperature power cables having special fire performance
- BS-EN-50382-2 - Railway applications. Railway rolling stock high temperature power cables having special fire performance
- BS-EN-50388 - Railway Applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
- BS-EN-50388-1 - Railway Applications. Fixed installations and rolling stock. Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability
- BS-EN-50388-1-TC - Tracked Changes. Railway Applications. Fixed installations and rolling stock. Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability
- BS-EN-50467 - Railway applications. Rolling stock. Electrical connectors, requirements and test methods
- BS-EN-50502 - Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
- BS-EN-50533 - Railway applications. Three-phase train line voltage characteristics
- BS-EN-50546 - Railway applications. Rolling Stock. Three-phase shore (external) supply system for rail vehicles and its connectors
- BS-EN-50547 - Railway applications. Batteries for auxiliary power supply systems
- BS-EN-50553 - Railway applications. Requirements for running capability in case of fire on board of rolling stock
- BS-EN-60077-1-TC - Tracked Changes. Railway applications. Electric equipment for rolling stock
- BS-EN-60077-2 - Railway applications. Electric equipment for rolling stock
- BS-EN-60077-2-TC - Tracked Changes. Railway applications. Electric equipment for rolling stock
- BS-EN-60322 - Railway applications. Electric equipment for rolling stock. Rules for power resistors of open construction
- BS-EN-60349-2 - Electrical traction. Rotating electrical machines for rail and road vehicles
- BS-EN-61287-1 - Railway applications. Power converters installed on board rolling stock
- BS-EN-61373 - Railway applications. Rolling stock equipment. Shock and vibration tests
- BS-EN-61375-2-3 - Electronic railway equipment. Train communication network (TCN)
- BS-EN-61375-3-4 - Electronic railway equipment. Train communication network (TCN)
- BS-EN-61377 - Railway applications. Rolling stock. Combined test method for traction systems
- BS-EN-61377-1 - Railway applications. Rolling stock. Combined testing of inverter-fed alternating current motors and their control system
- BS-EN-61377-2 - Railway applications. Rolling stock
- BS-EN-61881 - Railway applications. Rolling stock equipment. Capacitors for power electronics
- BS-EN-61881-2 - Railway applications. Rolling stock equipment. Capacitors for power electronics
- BS-EN-62267 - Railway applications. Automated urban guided transport (AUGT). Safety requirements
- BS-EN-62290-1 - Railway applications. Urban guided transport management and command/control systems
- BS-EN-62290-2 - Railway applications. Urban guided transport management and command/control systems
- BS-EN-62621 - Railway applications. Fixed installations. Electric traction. Specific requirements for composite insulators used for overhead contact line systems
- BS-EN-62625-1 - Electronic railway equipment. On board driving data recording system
- BS-EN-62625-2 - Electronic railway equipment. On board driving data recording system
- BS-EN-62718 - Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps
- BS-EN-62864-1 - Railway applications. Rolling stock. Power supply with onboard energy storage system
- BS-EN-62924 - Railway applications. Fixed installations. Stationary energy storage system for DC traction systems
- BS-EN-IEC-60077-3 - Railway applications. Electric equipment for rolling stock
- BS-EN-IEC-61133 - Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
- BS-EN-IEC-61133-TC - Tracked Changes. Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
- BS-EN-IEC-61375-2-6 - Electronic railway equipment. Train communication network (TCN)
- BS-EN-IEC-61375-2-8 - Electronic railway equipment. Train communication network (TCN)
- BS-EN-IEC-62271-209 - High-voltage switchgear and controlgear
- BS-EN-IEC-62290-3 - Railway applications. Urban guided transport management and command/control systems
- BS-EN-IEC-62928 - Railway applications. Rolling stock. Onboard lithium-ion traction batteries
- BS-EN-ISO-19659-1 - Railway applications. Heating, ventilation and air conditioning systems for rolling stock.Terms and definitions.
- BS-EN-ISO-3381 - Railway applications. Acoustics. Noise measurement inside railbound vehicles
- BS-IEC-62888-6 - Railway applications. Energy measurement on board trains
- BS-IEC-63190 - Railway applications. Fixed installations. Electric traction. Copper and copper alloy catenary wires for overhead contact line systems
- BS-ISO-10056 - Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles
- BS-ISO-10326-2 - Mechanical vibration. Laboratory method for evaluating vehicle seat vibration
- BS-ISO-10326-2-TC - Tracked Changes. Mechanical vibration. Laboratory method for evaluating vehicle seat vibration
- BS-ISO-19659-1 - Railway applications. Heating, ventilation and air conditioning systems for rolling stock
- BS-ISO-19659-2 - Railway applications. Heating, ventilation and air conditioning systems for rolling stock
- BS-ISO-19659-3 - Railway applications. Heating, ventilation and air conditioning systems for rolling stock
- BS-ISO-21106 - Railway applications. Recyclability and recoverability calculation method for rolling stock
- BS-ISO-22752 - Railway applications. Bodyside windows for rolling stock
- BS-ISO-2631-4 - Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration
- DD-CEN-13149-3 - Public transport. Road vehicle scheduling and control systems
- DD-CEN-13149-6 - Public transport. Road vehicle scheduling and control systems
- DD-CEN-45545-2 - Railway applications. Fire protection on railway vehicles
- DD-CEN-45545-3 - Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
- DD-CEN-45545-4 - Railway applications. Fire protection on railway vehicles. Fire safety requirements for railway rolling stock design
- DD-CEN-45545-6 - Railway applications. Fire protection on railway vehicles
- DD-CEN-45545-7 - Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
- DD-CLC-45545-5 - Railway applications. Fire protection on railway vehicles
- DD-CLC-50459-1 - Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface
- DD-CLC-50459-2 - Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Ergonomic arrangements of ERTMS/ETCS information
- DD-CLC-50459-3 - Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Ergonomic arrangements of ERTMS/GSM-R information
- DD-CLC-50467 - Railway applications. Rolling stock. Electrical connectors, requirements and test methods
- DD-CLC-50502 - Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems
- DD-CLC-50534 - Railway applications. Generic system architectures for onboard electric auxiliary power systems
- DD-CLC-50535 - Railway applications. Onboard auxiliary power converter systems
- DD-ENV-13149-2 - Public transport. Road vehicle scheduling and control systems
- DD-ENV-50121-3-2 - Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
- PD-CEN-15654-3 - Railway applications. Measurement of vertical forces on wheels and wheelsets
- PD-CEN-16251 - Railway applications. Environmental conditions. Design guidance for rolling stock
- PD-CEN-17039 - Railway applications. Technical Report about the revision of EN 14363
- PD-CEN-17373 - Railway applications. Railway rolling stock. Investigation of vehicles position on the reverse curve tracks during running and calculation of buffer overlap
- PD-CEN-17696 - Railway applications. Vehicle Maintenance. Guide for identification and management of Safety Critical Components for railway vehicles
- PD-CEN-17792 - Railway Applications. Wheel-rail contact geometry parameters. Technical report and background information about EN 15302
- PD-CEN-17843 - Railway applications. Investigations on vehicles to quantify track loading in curve radii below 250 m
- PD-CLC-50459-1 - Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface
- PD-CLC-50507 - Railway applications. Interference limits of existing track circuits used on European railways
- PD-CLC-50718 - Guidelines for the use of EN 45545-2 for Ni-Cd batteries on board rolling stock
- PD-IEC-61375-2-4 - Electronic railway equipment. Train communication network (TCN)
- PD-IEC-61375-2-7 - Electronic railway equipment. Train communication network (TCN)
- PD-IEC-62580-2 - Electronic railway equipment. On-board multimedia and telematic subsystems for railways
- PD-IEC-62773 - Railway applications. Procedure to determine the performance requirements for radio systems applied to radio-based train control systems
IEC:
- IEC-60077-1 - Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
- IEC-60077-1-RL - Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
- IEC-60077-2 - Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
- IEC-60077-2-RL - Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
- IEC-60077-3 - Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for DC circuit-breakers
- IEC-60077-3-RL - Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for DC circuit-breakers
- IEC-60077-4 - Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
- IEC-60077-4-RL - Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
- IEC-60077-5 - Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
- IEC-60077-5-RL - Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
- IEC-60310 - Railway applications - Traction transformers and inductors on board rolling stock
- IEC-60913 - Railway applications - Fixed installations - Electric traction overhead contact lines systems
- IEC-60913 CMV - Railway applications - Fixed installations - Electric traction overhead contact lines systems
- IEC-61375-2-4 - Electronic railway equipment - Train communication network (TCN) - Part 2-4: TCN application profile
- IEC-61375-2-6 - Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication
- IEC-61375-2-8 - Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance test
- IEC-61991 - Railway applications - Rolling stock - Protective provisions against electrical hazards
- IEC-61991-RL - Railway applications - Rolling stock - Protective provisions against electrical hazards
- IEC-61992-6 - Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies
- IEC-61992-6-AM2 - Amendment 2 - Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies
- IEC-62278-4 - Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) - Part 4: RAM risk and RAM life cycle aspects
- IEC-62290-3 - Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specification
- IEC-62486 - Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead contactline (to achieve free access)
- IEC-62499 - Railway applications - Current collection systems - Pantographs, testing methods for contact strips
- IEC-62505-3-1 - Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-1: Measurement, control and protection devices for specific use in AC tractions systems - Devices
- IEC-62505-3-2 - Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-2: Measurement, control and protection devices for specific use in AC traction systems - Current transformers
- IEC-62505-3-3 - Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-3: Measurement, control and protection devices for specific use in AC traction systems - Voltage transformers
- IEC-62590 - Railway applications - Fixed installations - Electronic power converters for substations
- IEC-62590-3-1 - Railway applications - Fixed installations - Electronic power converters - Part 3-1: AC traction applications - Electronic power compensators
- IEC-62590-RL - Railway applications - Fixed installations - Electronic power converters for substations
- IEC-62597 - Magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure . Measurement procedures
- IEC-62848-2 - Railway applications - DC surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
- IEC-62888-1 - Railway applications - Energy measurement on board trains - Part 1: General
- IEC-62888-2 - Railway applications - Energy measurement on board trains - Part 2: Energy measurement
- IEC-62888-3 - Railway applications - Energy measurement on board trains - Part 3: Data handling
- IEC-62888-4 - Railway applications - Energy measurement on board trains - Part 4: Communication
- IEC-62888-5 - Railway applications - Energy measurement on board trains - Part 5: Conformance test
- IEC-62888-6 - Railway applications - Energy measurement on board trains - Part 6: Requirements for purposes other than billing
- IEC-62912-2 - Railway applications - Direct current signalling monostable relays - Part 2: Spring type relays
- IEC-62917 - Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
- IEC-62924 - Railway applications - Fixed installations - Stationary energy storage system for DC traction systems
- IEC-62928 - Railway applications - Rolling stock - Onboard lithium-ion traction batteries
- IEC-62973-1 - Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 1: General requirements
- IEC-62973-2 - Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries
- IEC-62995 - Railway applications - Rolling stock - Rules for installation of cabling
- IEC-63076 - Railway applications - Rolling stock - Electrical equipment in trolley buses - Safety requirements and current collection systems
- IEC-63076-AM1 - Amendment 1 - Railway applications - Rolling stock - Electrical equipment in trolley buses - Safety requirements and current collection systems
- IEC-63190 - Railway applications - Fixed installations - Electric traction - Copper and copper alloy catenary wires for overhead contact line systems
ISO:
- ISO-1005-1 - Railway rolling stock material -- Part 1: Rough-rolled tyres for tractive and trailing stock -- Technical delivery conditions
- ISO-1005-2 - Railway rolling stock material -- Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock -- Dimensional, balancing and assembly requirements
- ISO-1005-3 - Railway rolling stock material -- Part 3: Axles for tractive and trailing stock -- Quality requirements
- ISO-1005-4 - Railway rolling stock material -- Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock -- Quality requirements
- ISO-10056 - Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles
- ISO-1005-6 - Railway rolling stock material -- Part 6: Solid wheels for tractive and trailing stock -- Technical delivery conditions
- ISO-1005-7 - Railway rolling stock material -- Part 7: Wheelsets for tractive and trailing stock -- Quality requirements
- ISO-1005-8 - Railway rolling stock material -- Part 8: Solid wheels for tractive and trailing stock -- Dimensional and balancing requirements
- ISO-1005-9 - Railway rolling stock material -- Part 9: Axles for tractive and trailing stock -- Dimensional requirements
- ISO-10326-2 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 2: Application to railway vehicles
- ISO-19659-1 - Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 1: Terms and definitions
- ISO-19659-2 - Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 2: Thermal comfort
- ISO-21106 - Railway applications - Recyclability and recoverability calculation method for rolling stock
- ISO-22749-1 - Railway applications - Suspension components - Part 1: Characteristics and test methods for elastomer-mechanical parts
- ISO-22749-2 - Railway applications - Suspension components - Part 2: Approval procedure and quality monitoring for elastomer-mechanical parts
- ISO-22752 - Railway applications - Bodyside windows for rolling stock
- ISO-24221 - Railway applications - Braking system - General requirements
- ISO-5948 - Railway rolling stock material - Ultrasonic acceptance testing
- ISO-6933 - Railway rolling stock material - Magnetic particle acceptance testing
Other SDOs:
- DIN-EN-13103 - Railway applications - Wheelsets and bogies - Non powered axles - Design method; German version EN 13103:2009+A2:2012
- DIN-EN-13272 - Railway applications - Electrical lighting for rolling stock in public transport systems
- DIN-EN-13452-1 - Part 1: Performance Requirements, Railway Applications - Braking, Mass Transit Brake
- DIN-EN-13452-2 - Part 2: Methods of Test, Railway Applications - Braking, Mass Transit Brake Systems
- DIN-EN-13597 - Railway Applications - Rubber Suspension Components - Rubber Diaphragms for Pneumatic
- DIN-EN-14067-1 - Railway applications - Aerodynamics - Part 1: Symbols and units
- DIN-EN-14067-2 - Railway applications - Aerodynamics - Part 2: Aerodynamics on open track; German version EN 14067-2:2003
- DIN-EN-14067-4 - Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track; German version EN 14067-4:2013
- DIN-EN-14067-5 - Part 5: Requirements & Test Procedures for Aerodynamics in Tunnels, Railway Applicatio
- DIN-EN-14198 - Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives; German version EN 14198:2016
- DIN-EN-14363 - Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests; German version EN 14363:2016
- DIN-EN-14531-1 - Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles; German version EN 14531-1:2015
- DIN-EN-14535-1 - Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
- DIN-EN-14601 - Railway Applications - Straight & Angled End Cocks for Brake Pipe & Main Reservoir Pip
- DIN-EN-14750-1 - Part 1: Comfort Parameters, Railway Applications - Air Conditioning for Urban & Suburb
- DIN-EN-14750-2 - Part 2: Type Tests, Railway Applications - Air Conditioning for Urban & Suburban Roll
- DIN-EN-15020 - Railway Applications - Rescue Coupler - Performance Requirements, Specific Interface G
- DIN-EN-15380-1 - Part 1: General, Railway Applications - Designation Systematic for Railway Vehicles
- DIN-EN-15380-2 - Part 2: Product Groups, Railway Applications - Designation System for Railway Vehicles
- DIN-EN-15380-3 - Part 3: Designation of Installation Sites & Locations, Railway Applications - Designat
- DIN-EN-ISO-3095 - Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
- DIN-EN-ISO-3381 - Railway Applications - Acoustics - Measurement of Noise Inside Railbound Vehicles
- EN-13149-2 - Public Transport, Road Vehicle Scheduling & Control Systems, Worldfip Cabling Specific
- EN-13272 - Railway applications - Electrical lighting for rolling stock in public transport systems
- EN-13452-1 - Part 1: Performance Requirements, Railway Applications - Braking, Mass Transit Brake S
- EN-13452-2 - Part 2: Methods of Test, Railway Applications - Braking, Mass Transit Brake Systems
- EN-13597 - Railway Applications - Rubber Suspension Components - Rubber Diaphragms for Pneumatic
- EN-13979-1 - Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels
- EN-14067-4 - Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track
- EN-14067-5 - Part 5: Requirements & Test Procedures for Aerodynamics in Tunnels, Railway Applicatio
- EN-14067-6 - Part 6: Requirements & Test Procedures for Cross Wind Assessment, Railway Applications
- EN-14198 - Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
- EN-14363 - Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
- EN-14531-1 - Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
- EN-14531-2 - Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles
- EN-14531-6 - Part 6: Step by Step Calculations for Train Sets or Single Vehicles, Railway Applicati
- EN-14535-1 - Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
- EN-14535-2 - Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
- EN-14535-3 - Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification
- EN-14601 - Railway Applications - Straight & Angled End Cocks for Brake Pipe & Main Reservoir Pip
- EN-14750-1 - Part 1: Comfort Parameters, Railway Applications - Air Conditioning for Urban & Suburb
- EN-14750-2 - Part 2: Type Tests, Railway Applications - Air Conditioning for Urban & Suburban Roll
- EN-14752 - Railway applications - Body side entrance systems for rolling stock
- EN-15020 - Railway Applications - Rescue Coupler - Performance Requirements, Specific Interface G
- EN-15049 - Railway Applications, Suspension Components, Torsion Bar, Steel
- EN-15085-1 - Railway applications - Welding of railway vehicles and components - Part 1: General
- EN-15085-3 - Part 3: Design Requirements, Railway Applications - Welding of Railway Vehicles & Com
- EN-15085-4 - Part 4: Production Requirement, Railway Applications - Welding of Railway Vehicles & C
- EN-15085-5 - Part 5: Inspection, Testing & Documentation, Railway Applications - Welding of Railway
- EN-15220 - Railway applications - Brake indicators
- EN-15220-1 - Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators
- EN-15273-1 - Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock
- EN-15273-2 - Railway applications - Gauges - Part 2: Rolling stock gauge
- EN-15273-3 - Railway applications - Gauges - Part 3: Structure gauges
- EN-15302 - Railway Applications - Method for Determining the Equivalent Conicity
- EN-15327-1 - Part 1: General Requirements & Passenger Interface for the Passenger Emergency Brake S
- EN-15329 - Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
- EN-15355 - Railway Applications - Braking - Distributor Valves & Distributor-Isolating Devices
- EN-15380-1 - Part 1: General, Railway Applications - Designation Systematic for Railway Vehicles
- EN-15380-2 - Part 2: Product Groups, Railway Applications - Designation System for Railway Vehicles
- EN-15380-3 - Part 3: Designation of Installation Sites & Locations, Railway Applications - Designat
- EN-15380-4 - Railway applications - Classification system for railway vehicles - Part 4: Function groups
- EN-15380-5 - Railway applications - Classification system for railway vehicles - Part 5: System Breakdown Structure (SBS)
- EN-15437-1 - Part 1: Track Side Equipment & Rolling Stock Axlebox, Railway Applications - Axlebox C
- EN-15437-2 - Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring
- EN-15551 - Railway applications - Railway rolling stock - Buffers
- EN-15566 - Railway applications - Railway rolling stock - Draw gear and screw coupling
- EN-15595 - Railway applications - Braking - Wheel slide protection
- EN-15611 - Railway Applications - Braking - Relay Valves
- EN-15612 - Railway Applications - Braking - Brake Pipe Accelerator Valve
- EN-15624 - Railway Applications - Braking - Empty-Loaded Changeover Devices
- EN-15625 - Railway Applications - Braking - Automatic Variable Load Sensing Devices
- EN-15654-1 - Railway applications. Measurement of vertical forces on wheels and wheelsets. On-track measurement sites for vehicles in service
- EN-15654-2 - Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 2: Test in workshop for new, modified and maintained vehicles
- EN-15663 - Railway applications - Vehicle reference masses
- EN-15807 - Railway applications - Pneumatic half couplings
- EN-15827-2 - Part 2: Structural Requirements, Railway Applications, Bogies & Running Gear
- EN-16207 - Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
- EN-16404 - Railway applications - Re-railing and recovery requirements for railway vehicles
- EN-16452 - Railway applications - Braking - Brake blocks
- EN-16683 - Railway applications - Call for aid and communication device - Requirements
- EN-17018 - Railway applications - Rolling stock maintenance - Terms and definitions
- EN-17065 - Railway applications - Braking - Passenger coach test procedure
- EN-17095 - Railway applications - Rolling stock maintenance - Maintenance records
- EN-45545-1 - Railway applications - Fire protection on railway vehicles - Part 1: General
- EN-45545-2 - Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
- EN-45545-3 - Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
- EN-45545-4 - Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design
- EN-45545-5 - Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
- EN-45545-6 - Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems
- EN-45545-7 - Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
- EN-50121-3-1 - Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
- EN-50121-3-2 - Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
- EN-50153 - Railway applications - Rolling stock - Protective provisions relating to electrical hazards
- EN-50155 - Railway applications - Rolling stock - Electronic equipment
- EN-50206-2 - Part 2: Pantographs for Metros & Light Rail Vehicles, Railway Applications - Rolling S
- EN-50215 - Railway Applications, Rolling Stock, Testing of Rolling Stock on Completion of Constru
- EN-50264-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
- EN-50264-2-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
- EN-50264-2-2 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
- EN-50264-3-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
- EN-50264-3-2 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
- EN-50343 - Railway applications - Rolling stock - Rules for installation of cabling
- EN-50355 - Railway applications - Railway rolling stock cables having special fire performance - Guide to use
- EN-50382-1 - Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 1: General requirements
- EN-50382-2 - Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 2: Single core silicone rubber insulated cables for 120 Degrees C or 150 Degrees C
- EN-50388 - Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
- EN-50502 - Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
- EN-50533 - Railway applications - Three-phase train line voltage characteristics
- EN-50547 - Railway applications - Batteries for auxiliary power supply systems
- EN-50553 - Railway applications - Requirements for running capability in case of fire on board of rolling stock
- EN-60077-2 - Railway applications. Electric equipment for rolling stock. Electrotechnical components. General rules
- EN-60349-2 - Electrical Traction, Rotating Electrical Machines for Rail & Road Vehicles, Electronic
- EN-60512-15-1 - Connectors for Electronic Equipment, Tests & Measurements, Connector Tests (Mechanical
- EN-61287-1 - Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
- EN-61373 - Railway Applications - Rolling Stock Equipment - Shock & Vibration Tests
- EN-61881 - Railway Applications, Rolling Stock Equipment, Capacitors for Power Electronics
- EN-62267 - Railway Applications - Automated Urban Guided Transport (Augt) - Safety Requirements
- EN-62290-1 - Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts
- EN-62924 - Railway applications - Fixed installations - Stationary energy storage system for DC traction systems
- EN-IEC-61375-2-6 - Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication (IEC 61375-2-6:2018)
- EN-IEC-62928 - Railway applications - Rolling stock - Onboard lithium-ion traction batteries
- JIS-E-4208-1 - Rolling stock -- Bogie -- Strength test -- Part 1: Methods for static load testing
- JIS-E-4208-2 - Rolling stock -- Bogie -- Strength test -- Part 2: Methods for on-track testing
- SIS-CEN-15654-3 - Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 3: Approval and verification of on track measurement sites for vehicles in service
- SIS-CEN/TR-14067-7 - Railway applications - Aerodynamics - Part 7: Fundamentals for test procedures for train-induced ballast projection
- SIS-CEN/TR-16251 - Railway applications - Environmental conditions - Design guidance for rolling stock
- SIS-CEN/TR-17039 - Railway applications - Technical Report about the revision of EN 14363
- SIS-CEN/TR-17696 - Railway applications - Vehicle Maintenance - Guide for identification and management of Safety Critical Components for railway vehicles
- SIS-CEN/TR-17792 - Railway Applications - Wheel-rail contact geometry parameters - Technical report and background information about EN 15302
- SIS-CEN/TS-13149-3 - Public transport - Road vehicle scheduling and control systems - On-board data transmission interfaces - Part 3: WORLDFIP message content
- SIS-CEN/TS-13149-6 - Public transport - Road vehicle scheduling and control systems - Part 6: CAN message content
- SIS-CEN/TS-17843 - Railway applications - Investigations on vehicles to quantify track loading in curve radii below 250 m
- SIS-CEN/TS-45545-1 - Railway applications - Fire protection on railway vehicles - Part 1: General
- SIS-CEN/TS-45545-2 - Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
- SIS-CEN/TS-45545-3 - Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
- SIS-CEN/TS-45545-4 - Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements of railway rolling stock design
- SIS-CEN/TS-45545-6 - Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems
- SIS-CEN/TS-45545-7 - Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
- SIS-CLC/TS-45545-5 - Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
- SS-EN-12663 - Railway applications - Structural requirements of railway vehicle bodies
- SS-EN-13103 - Railway applications - Wheelsets and bogies - Non powered axles - Design method
- SS-EN-13103-1 - Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals
- SS-EN-13104 - Railway applications - Wheelsets and bogies - Powered axles - Design method
- SS-EN-13149-1 - Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission
- SS-EN-13149-2 - Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications
- SS-EN-13149-4 - Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission buses
- SS-EN-13149-5 - Public transport - Road vehicle scheduling and control systems - Part 5: CANopen cabling specifications
- SS-EN-13262 - Railway applications - Wheelsets and bogies - Wheels - Product requirements
- SS-EN-13272 - Railway applications - Electrical lighting for rolling stock in public transport systems
- SS-EN-13272-1 - Railway applications - Electrical lighting for rolling stock in public transport systems - Part 1: Heavy rail
- SS-EN-13272-2 - Railway applications - Electrical lighting for rolling stock in public transport systems - Part 2: Urban rail
- SS-EN-13298 - Railway applications - Suspension components - Helical suspension springs, steel
- SS-EN-13452-1 - Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements
- SS-EN-13452-2 - Railway applications - Braking - Mass transit brake systems - Part 2: Methods of test
- SS-EN-13481-2 - Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers in ballast
- SS-EN-13481-5 - Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for ballastless tracks
- SS-EN-13597 - Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
- SS-EN-13807 - Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
- SS-EN-13979-1 - Railway applications - Wheelsets and bogies - Monobloc Wheels - Technical approval procedure - Part 1: Forged and rolled wheels
- SS-EN-14033-1 - Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
- SS-EN-14067-1 - Railway applications - Aerodynamics - Part 1: Symbols and units
- SS-EN-14067-2 - Railway applications - Aerodynamics - Part 2: Aerodynamics on open track
- SS-EN-14067-3 - Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels
- SS-EN-14067-4 - Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track
- SS-EN-14067-5 - Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels
- SS-EN-14067-6 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
- SS-EN-14198 - Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
- SS-EN-14363 - Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
- SS-EN-14478 - Railway applications - Braking - Generic vocabulary
- SS-EN-14531-1 - Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
- SS-EN-14531-2 - Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles
- SS-EN-14531-6 - Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 6: Step by step calculations for train sets or single vehicles
- SS-EN-14535-1 - Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
- SS-EN-14535-2 - Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
- SS-EN-14535-3 - Railways applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification
- SS-EN-14601 - Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
- SS-EN-14750-1 - Railway applications - Air conditioning for urban and suburban rolling stock - Part 1: Comfort parameters
- SS-EN-14750-2 - Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests
- SS-EN-14752 - Railway applications - Bodyside entrance systems for rolling stock
- SS-EN-14811 - Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles
- SS-EN-15020 - Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods
- SS-EN-15049 - Railway applications - Suspension components - Torsion bar, steel
- SS-EN-15085-1 - Railway applications - Welding of railway vehicles and components - Part 1: General
- SS-EN-15085-2 - Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
- SS-EN-15085-3 - Railway applications - Welding of railway vehicles and components - Part 3: Design requirements
- SS-EN-15085-4 - Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
- SS-EN-15085-5 - Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
- SS-EN-15085-6 - Railway applications - Welding of railway vehicles and components - Part 6: Maintenance welding requirements
- SS-EN-15153-1 - Railway applications - External visible and audible warning devices - Part 1: Head, marker and tail lamps for heavy rail
- SS-EN-15220 - Railway applications - Brake indicators
- SS-EN-15220-1 - Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators
- SS-EN-15227 - Railway applications - Crashworthiness requirements for railway vehicle bodies
- SS-EN-15273-1 - Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock
- SS-EN-15273-2 - Railway applications - Gauges - Part 2: Rolling stock gauge
- SS-EN-15273-3 - Railway applications - Gauges - Part 3: Structure gauges
- SS-EN-15302 - Railway applications - Wheel-rail contact geometry parameters - Definitions and methods for evaluation
- SS-EN-15327-1 - Railway applications - Passenger alarm subsystem - Part 1: General requirements and passenger interface for the passenger emergency brake system
- SS-EN-15328 - Railway applications - Braking - Brake pads
- SS-EN-15329 - Railway applications - Braking - Brake block holder and brake block key
- SS-EN-15355 - Railway applications - Braking - Distributor valves and distributor-isolating devices
- SS-EN-15380-1 - Railway applications - Designation system for railway vehicles - Part 1: General principles
- SS-EN-15380-2 - Railway applications - Designation system for railway vehicles - Part 2: Product groups
- SS-EN-15380-3 - Railway applications - Designation system for railway vehicles - Part 3: Designation of installation sites and locations
- SS-EN-15380-4 - Railway applications - Classification system for railway vehicles - Part 4: Function groups
- SS-EN-15380-5 - Railway applications - Classification system for railway vehicles - Part 5: System Breakdown Structure (SBS)
- SS-EN-15437-1 - Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
- SS-EN-15437-2 - Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring
- SS-EN-15551 - Railway applications - Railway rolling stock - Buffers
- SS-EN-15566 - Railway applications - Railway Rolling stock - Draw gear and screw coupling
- SS-EN-15595 - Railway applications - Braking - Wheel slide protection
- SS-EN-15611 - Railway applications - Braking - Relay valves
- SS-EN-15612 - Railway applications - Braking - Brake pipe accelerator
- SS-EN-15624 - Railway applications - Braking - Empty-loaded changeover devices
- SS-EN-15625 - Railway applications - Braking - Automatic variable load sensing devices
- SS-EN-15654-1 - Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service
- SS-EN-15654-2 - Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 2: Test in workshop for new, modified and maintained vehicles
- SS-EN-15663 - Railway applications - Vehicle reference masses
- SS-EN-15686 - Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G
- SS-EN-15687 - Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN
- SS-EN-15734-1 - Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions
- SS-EN-15734-2 - Railway applications - Braking systems of high speed trains - Part 2: Test methods
- SS-EN-15806 - Railway applications - Braking - Static brake testing
- SS-EN-15807 - Railway applications - Pneumatic half couplings
- SS-EN-15877-1 - Railway applications - Marking on railway vehicles - Part 1: Freight wagons
- SS-EN-15997 - All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
- SS-EN-16207 - Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
- SS-EN-16241 - Railway applications - Slack adjuster
- SS-EN-16334 - Railway applications - Passenger Alarm System - System requirements
- SS-EN-16334-1 - Railway applications - Passenger Alarm System - Part 1: System requirements for mainline rail
- SS-EN-16404 - Railway applications - Re-railing and recovery requirements for railway vehicles
- SS-EN-16452 - Railway applications - Braking - Brake blocks
- SS-EN-16683 - Railway applications - Call for aid and communication device - Requirements
- SS-EN-16704-2-1 - Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
- SS-EN-16704-2-2 - Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers
- SS-EN-16704-3 - Railway applications - Track - Safety protection on the track during work - Part 3: Competences for personnel related to work on or near tracks
- SS-EN-16725 - Railway applications - Track - Restoration and repair of manganese crossings
- SS-EN-16727-1 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test method
- SS-EN-16727-2-1 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains - Resistance to fatigue
- SS-EN-16727-2-2 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-2: Mechanical performance under dynamic loadings caused by passing trains - Calculation method
- SS-EN-16727-3 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3: General safety and environmental requirements
- SS-EN-16729-1 - Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles
- SS-EN-16730 - Railway applications - Track - Concrete sleepers and bearers with under sleeper pads
- SS-EN-16771 - Railway applications - Infrastructure - Aluminothermic welding of grooved rails
- SS-EN-17018 - Railway applications - Rolling stock maintenance - Terms and definitions
- SS-EN-17023 - Railway applications - Railway vehicle maintenance - Creation and modification of maintenance plan
- SS-EN-17065 - Railway applications - Braking - Passenger coach test procedure
- SS-EN-17084 - Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components
- SS-EN-17095 - Railway applications - Rolling stock maintenance - Maintenance records
- SS-EN-17343 - Railway applications - General terms and definitions
- SS-EN-17355 - Railway applications - Communication device for urban rail - System requirements
- SS-EN-17460 - Railway applications - Adhesive bonding of rail vehicles and their components
- SS-EN-17530 - Railway applications - Interior glazing for rail vehicles
- SS-EN-45545-1 - Railway applications - Fire protection on railway vehicles - Part 1: General
- SS-EN-45545-2 - Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
- SS-EN-45545-3 - Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
- SS-EN-45545-4 - Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design
- SS-EN-45545-5 - Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
- SS-EN-45545-6 - Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems
- SS-EN-45545-7 - Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
- SS-EN-50153 - Railway applications - Rolling stock - Protective provisions relating to electrical hazards
- SS-EN-61373 - Railway applications - Rolling stock equipment - Shock and vibration tests
- SS-EN-ISO-14906 - Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2022)
- SS-EN-ISO-19659-1 - Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 1: Terms and definitions (ISO 19659-1:2017)
- SS-EN-ISO-3095 - Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
- SS-EN-ISO-3381 - Railway applications - Acoustics - Noise measurement inside railbound vehicles (ISO 3381:2021)
- SS-EN-ISO/IEC-29100 - Information technology - Security techniques - Privacy framework (ISO/IEC 29100:2011, including Amd 1:2018)
- SS-ENV-13149-2 - Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications
- SS-ENV-13149-4 - Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission busses
- SS-ENV-13149-5 - Public transport - Road vehicle scheduling and control systems - Part 5: CANopen cabling specifications
- SS-ISO-12117-2 - Earth-moving machinery - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t (ISO 12117-2:2008, IDT)
- SS-ISO-19659-1 - Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 1: Terms and definitions (ISO 19659-1:2017, IDT)
- SS-ISO-19659-2 - Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 2: Thermal comfort (ISO 19659-2:2020, IDT)
- SS-ISO-19659-3 - Railway Applications - Heating, ventilation and air condition systems for rolling stock - Part 3: Energy efficiency (ISO 19659-3:2022, IDT)
- SS-ISO-24478 - Railway applications - Braking - Generic vocabulary (ISO 24478:2023, IDT)
- SS-ISO/ASTM-51631 - Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components
- UNE-EN-15329 - Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
- UNE-EN-16452 - Railway applications - Braking - Brake blocks
- UNE-EN-45545-2 - Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components