Document Center List of Standards on Commercial Vehicles In General
ICS Code 43.080.01
Return to ICS Index.Up to Level 2:
- 43.080 (Commercial vehicles Road vehicle systems, see 43.040 Tyres for road vehicles, see 83.160.10)
The following documents are a part of this series:
BSI:
- BS-AU-209-8 - Vehicle security
- BS-AU-50-1.2.2 - Tyres and Wheels, Tyres, Commercial Vehicle Tyres, Method of Measuring Tyre Rolling Circumference, Loaded New Tyres
- BS-AU-50-1.2.4 - Tyres and wheels. Tyres. Commercial vehicle tyres. Method of test for verifying tyre capabilities
- BS-AU-50-2.3 - Tyres and wheels. Wheels and rims
- BS-AU-50-2.7A - Tyres and wheels. Wheels and rims. Code of practice for the selection and care of tyres and wheels for commercial vehicles
- BS-AU-50-2-7B - Tyres and wheels
- BS-AU-50-2.7B - Tyres and wheels
- BS-AU-50-3.8 - Tyres and wheels. Valves
- BS-AU-50-4.2.1 - Tyres and wheels. Rim profiles and dimensions. Commercial vehicle rims. Specification for metric series rims
- BS-AU-50-4.2.1A - Tyres and wheels. Rim profiles and dimensions. Commercial vehicle rims
- BS-AU-50-4.5.1 - Tyres and wheels. Rim profiles and dimensions. Industrial vehicle rims
- BS-EN-17963 - Natural gas vehicles. LNG vehicle fuelling procedures
- BS-ISO-11012 - Heavy commercial vehicles and buses. Open-loop test methods for the quantification of on-centre handling. Weave test and transition test
- BS-ISO-14791 - Road vehicles. Heavy commercial vehicle combinations and articulated buses. Lateral stability test methods
- BS-ISO-14792 - Road vehicles. Heavy commercial vehicles and buses. Steady-state circular tests
- BS-ISO-14793 - Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
- BS-ISO-15037-2 - Road vehicles. Vehicle dynamics test methods
- BS-ISO-15037-3 - Road vehicles. Vehicle dynamics test methods
- BS-ISO-15222 - Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres
- BS-ISO-15222-TC - Tracked Changes. Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres
- BS-ISO-16234 - Heavy commercial vehicles and buses. Straight-ahead braking on surfaces with split coefficient of friction. Open-loop test method
- BS-ISO-16552 - Heavy commercial vehicles and buses. Stopping distance in straight-line braking with ABS. Open loop and closed loop test methods
- BS-ISO-18375 - Heavy commercial vehicles and buses. Test method for yaw stability. Sine with dwell test
- BS-ISO-19377 - Heavy commercial vehicles and buses. Emergency braking on a defined path. Test method for trajectory measurement
- BS-ISO-19380 - Heavy commercial vehicles and buses. Centre of gravity measurements. Axle lift, tilt-table and stable pendulum test methods
- BS-ISO-19585 - Heavy commercial vehicles and buses. Vehicle dynamics simulation and validation. Steady-state circular driving behavior
- BS-ISO-19586 - Heavy commercial vehicles and buses. Vehicle dynamics simulation and validation. Lateral dynamic stability of vehicle combinations
- BS-ISO-21233 - Heavy commercial vehicles and buses. Vehicle dynamics simulation and validation. Closing-curve test
- BS-ISO-21234 - Road vehicles. Heavy commercial vehicles and buses. Mass moment of inertia measurement
- BS-ISO-21308-1 - Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)
- BS-ISO-21308-1-TC - Tracked Changes. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)
- BS-ISO-21308-2 - Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)
- BS-ISO-21308-3 - Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)
- BS-ISO-21308-5 - Road vehicles. Product data exchange between chassis and body work manufacturers (BEP)
- BS-ISO-21308-6 - Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)
- BS-ISO-21308-7 - Road vehicles. Product data exchange between chassis and body work manufacturers (BEP)
- BS-ISO-22135 - Road vehicles. Heavy commercial vehicles and buses. Calculation method for steady state rollover
- BS-ISO-22139 - Heavy commercial vehicles and buses. Test method for steering effort measurement when manoeuvring at low speed or with stationary vehicle
- BS-ISO-23365 - Heavy commercial vehicles and buses. Definitions of properties for the determination of suspension kinematic and compliance characteristics
- BS-ISO-23373 - Heavy commercial vehicles and buses. Vehicle dynamics simulation and validation. Tyre model for lateral estimation of heavy vehicle combinations operated at dry paved road surface
- BS-ISO-4209-2 - Truck and bus tyres and rims (metric series)
- BS-ISO-9112 - Truck and bus tyres. Methods of measuring tyre rolling circumference. Loaded new tyres
- DD-ISO/PAS-21308-1 - Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)
ISO:
- ISO-11012 - Heavy commercial vehicles and buses - Open-loop test methods for the quantification of on-centre handling - Weave test and transition test
- ISO-11026 - Heavy commercial vehicles and buses - Test method for roll stability - Closing-curve test
- ISO-14791 - Road vehicles -- Heavy commercial vehicle combinations and articulated buses -- Lateral stability test methods
- ISO-14792 - Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests
- ISO-14793 - Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods
- ISO-15037-2 - Road vehicles - Vehicle dynamics test methods - Part 2: General conditions for heavy vehicles and buses
- ISO-15037-3 - Road vehicles - Vehicle dynamics test methods - Part 3: General conditions for passenger cars ride comfort tests
- ISO-16234 - Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method
- ISO-16333 - Heavy commercial vehicles and buses - Steady-state rollover threshold - Tilt-table test method
- ISO-16552 - Heavy commercial vehicles and buses - Stopping distance in straight-line braking with ABS - Open loop and closed loop test methods
- ISO-18375 - Heavy commercial vehicles and buses - Test method for yaw stability - Sine with dwell test
- ISO-19377 - Heavy commercial vehicles and buses - Emergency braking on a defined path - Test method for trajectory measurement
- ISO-19380 - Heavy commercial vehicles and buses - Centre of gravity measurements - Axle lift, tilt-table and stable pendulum test methods
- ISO-19585 - Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Steady-state circular driving behavior
- ISO-19586 - Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Lateral dynamic stability of vehicle combinations
- ISO-21233 - Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Closing-curve test
- ISO-21234 - Road vehicles - Heavy commercial vehicles and buses . Mass moment of inertia measurement
- ISO-21308-1 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 1: General principles
- ISO-21308-2 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 2: Dimensional bodywork exchange parameters
- ISO-21308-3 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 3: General, mass and administrative exchange parameters
- ISO-21308-4 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 4: Mapping to STEP application protocol 239
- ISO-21308-5 - Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) - Part 5: Coding of loader crane bodywork
- ISO-21308-6 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 6: Coding of hook loader bodywork
- ISO-21308-7 - Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) - Part 7: Coding of skip loader bodywork
- ISO-22135 - Road vehicles - Heavy commercial vehicles and buses - Calculation method for steady-state rollover threshold
- ISO-22138 - Heavy commercial vehicles - Vehicle stability during tipper body operation - Tilt-table test method
- ISO-22139 - Heavy commercial vehicles and buses - Test method for steering effort measurement when manoeuvring at low speed or with stationary vehicle
- ISO-23365 - Heavy commercial vehicles and buses - Definitions of properties for the determination of suspension kinematic and compliance characteristics
- ISO-23373 - Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Tyre model for lateral estimation of heavy vehicle combinations operated at dry paved road surface
- ISO-7656 - Commercial road vehicles - Dimensional codes
- ISO/PAS-21308-1 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 1: General principles
Other SDOs:
- SIS-ISO/PAS-21308-1 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 1: General principles (ISO/PAS 21308-1:2007, IDT)
- SIS-ISO/TS-21308-4 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 4: Mapping to STEP application protocol 239 (ISO/TS 21308-4:2007, IDT)
- SS-ISO-11012 - Heavy commercial vehicles and buses - Open-loop test methods for the quantification of on-centre handling - Weave test and transition test (ISO 11012:2009, IDT)
- SS-ISO-11026 - Heavy commercial vehicles and buses - Test method for roll stability - Closing-curve test (ISO 11026:2010, IDT)
- SS-ISO-14791 - Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods
- SS-ISO-14792 - Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests (ISO 14792:2011)
- SS-ISO-14793 - Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods (ISO 14793:2011, IDT)
- SS-ISO-15037-2 - Road vehicles - Vehicle dynamics test methods - Part 2: General conditions for heavy vehicles and buses
- SS-ISO-15037-3 - Road vehicles Vehicle dynamics test methods Part 3: General conditions for passenger cars ride comfort tests (ISO 15037-3:2022, IDT)
- SS-ISO-16234 - Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method (ISO 16234:2006, IDT)
- SS-ISO-16333 - Heavy commercial vehicles and buses - Steady-state rollover threshold - Tilt-table test method (ISO 16333:2011, IDT)
- SS-ISO-16552 - Heavy commercial vehicles and buses - Stopping distance in straight-line braking with ABS - Open loop and closed loop test methods (ISO 16552:2014, IDT)
- SS-ISO-18375 - Heavy commercial vehicles and buses - Test method for yaw stability - Sine with dwell test (ISO 18375:2016, IDT)
- SS-ISO-19377 - Heavy commercial vehicles and buses - Emergency braking on a defined path - Test method for trajectory measurement (ISO 19377:2017, IDT)
- SS-ISO-19380 - Heavy commercial vehicles and buses - Centre of gravity measurements - Axle lift, tilt-table and stable pendulum test methods (ISO 19380:2019, IDT)
- SS-ISO-19585 - Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Steady-state circular driving behavior (ISO 19585:2019, IDT)
- SS-ISO-19586 - Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Lateral dynamic stability of vehicle combinations (ISO 19586:2019, IDT)
- SS-ISO-21233 - Heavy commercial vehicles and buses Vehicle dynamics simulation and validation Closing-curve test (ISO 21233:2021, IDT)
- SS-ISO-21234 - Road vehicles Heavy commercial vehicles and buses - Mass moment of inertia measurement (ISO 21234:2022, IDT)
- SS-ISO-21308-1 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 1: General principles (ISO 21308-1:2018, IDT)
- SS-ISO-21308-2 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 2: Dimensional bodywork exchange parameters (ISO 21308-2:2020, IDT)
- SS-ISO-21308-3 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 3: General, mass and administrative exchange parameters (ISO 21308-3:2020, IDT)
- SS-ISO-21308-5 - Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) - Part 5: Coding of loader crane bodywork (ISO 21308-5:2014, IDT)
- SS-ISO-21308-6 - Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 6: Coding of hook loader bodywork (ISO 21308-6:2018, IDT)
- SS-ISO-21308-7 - Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) - Part 7: Coding of skip loader bodywork (ISO 21308-7:2018, IDT)
- SS-ISO-22135 - Road vehicles Heavy commercial vehicles and buses Calculation method for steady-state rollover threshold (ISO 22135:2023, IDT)
- SS-ISO-22138 - Heavy commercial vehicles Vehicle stability during tipper body operation Tilt-table test method (ISO 22138:2022, IDT)
- SS-ISO-22139 - Heavy commercial vehicles and buses Test method for steering effort measurement when manoeuvring at low speed or with stationary vehicle (ISO 22139:2022, IDT)
- SS-ISO-23365 - Heavy commercial vehicles and buses Definitions of properties for the determination of suspension kinematic and compliance characteristics (ISO 23365:2022, IDT)
- SS-ISO-8667 - Commercial vehicles and buses - Cross-tooth gearbox flanges, type T (ISO 8667:1992, IDT)