Document Center List of Standards on Motion Picture Films. Cartridges
ICS Code 37.060.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-2829 - Specification for 35-mm Magnetic Sound Recording Azimuth Alignment Test Films
- BS-5550-1.1.3 - Cinematography. 8 mm film. Raw stock. Specification for cutting and perforating dimensions of 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0 or 1-0)
- BS-5550-1.3.1 - Cinematography. 8 mm film. Camera usage. Specification for camera usage of 8 mm type R motion-picture film
- BS-5550-1.4.3 - Cinematography, 8 mm Film, Sound, Specification for Location& Width of Magnetic Stripi
- BS-5550-1.4.5 - Cinematography, 8 mm Film, Sound, Specification for Position& Width Dimensions of Phot
- BS-5550-1.6.1 - Cinematography. 8 mm film. Splices. Specification for the dimensions of cemented or welded splices on 8 mm Type S motion-picture film for projector use
- BS-5550-2.12.1 - Cinematography. 16 mm film. Miscellaneous
- BS-5550-2.2.1 - Cinematography. 16 mm film. Image areas. Specification for position and dimensions of the image produced by 16 mm motion-picture camera aperture
- BS-5550-2.2.3 - Cinematography. 16 mm film. Image areas. Specification for positions and dimensions of picture image area and photographic sound record on 16 mm motion-picture release prints
- BS-5550-2.4.1 - Cinematography. 16 mm film. Sound. Specification for positions and dimensions of 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film
- BS-5550-3.2.3 - Cinematography. 35 mm film. Image areas. Specification for positions and dimensions of the picture image area and photographic sound record on 35 mm motion-picture release prints
- BS-5550-3.4.3 - Cinematography. 35 mm film. Sound. Specification for positions and width dimensions of recording and reproducing head gaps for three magnetic sound records on 35 mm motion-picture film containing no picture
- BS-5550-3.4.4 - Cinematography. 35 mm film. Sound
- BS-5550-3.4.5 - Cinematography. 35 mm film. Sound
- BS-5550-5.4.3 - Cinematography. Common to more than one film gauge. Sound. Specification for positions and width dimensions of recording and reproducing head gaps for three-, four- or six-track magnetic sound records on 35 mm and single-track on 17.5 mm motion-picture film containing no picture
- BS-5550-5.4.6 - Cinematography. Common to more than one film gauge. Sound. Method for measurement of the signal to noise ratio of 8 mm type, 16 mm and 35 mm variable area photographic sound records
- BS-5550-5.5.2 - Cinematography. Common to more than one film gauge. Printing. Specification for leaders and run-out trailers for 35 mm and 16 mm release prints
- BS-5550-5.6.1 - Cinematography. Common to more than one film gauge. Splices. Specification for dimensions and locations of splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion picture films
- BS-EN-ISO/IEC-17030-TC - Tracked Changes. Conformity assessment. General requirements for third-party marks of conformity
- BS-ISO-12222 - Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film. Specifications and dimensions
- BS-ISO-12606 - Cinematography. Care and preservation of magnetic audio recordings for motion-pictures and television
- BS-ISO-12611 - Cinematography. Audio head tones for use in international exchange of 35 mm analogue magnetic film masters. Specifications and location
- BS-ISO-12612 - Cinematography. Interchange of post-production sprocket-based materials
- BS-ISO-1700 - Cinematography. 8 mm type S motion-picture raw stock film. Cutting and perforating dimensions
- BS-ISO-17266 - Cinematography. Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives. Position and width dimensions
- BS-ISO-17332 - Cinematography. Manufacturer printed latent image identification information for 35mm motion-picture colour-print film. Specifications
- BS-ISO-20859 - Cinematography. Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
- BS-ISO-2906 - Cinematography. Image area produced by camera aperture on 35mm motion picture film. Position and dimensions
- BS-ISO-2939 - Cinematography. Picture image area on 35 mm motion-picture release prints. Position and dimensions and analogue and digital photographic sound to picture record displacement
- BS-ISO-3026 - Cinematography. Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667). Position and dimensions
- BS-ISO-4241 - Cinematography. Projection film leader (time-based), trailer and cue marks. Specifications
- BS-ISO-4834 - Cinematography. Magnetic sound test films excluding striped release prints. Basic technical characteristics
- BS-ISO-491 - Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions
- BS-ISO-6025 - Cinematography. Analogue photographic sound test films, 35 mm and 16mm. Specifications
- BS-ISO-6221 - Photography. Films and papers. Determination of dimensional change
- BS-ISO-71 - Cinematography. 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film. Positions and dimensions
- BS-ISO-7739 - Cinematography. Two-track photographic analogue sound records on 16 mm motion-picture prints. Positions and width dimensions
- BS-ISO-7832 - Cinematography. Photoelectric output factor of photographic-type audio-level test films. Measurement and calibration
ISO:
- ISO-1019 - Cinematography -- Spools, daylight loading type for 16 mm motion-picture cameras -- Dimensions
- ISO-1020 - Cinematography -- Spools, daylight loading type for double-8 mm motion-picture cameras -- Dimensions
- ISO-10356 - Cinematography -- Storage and handling of nitrate-base motion-picture films
- ISO-1039 - Cinematography -- Cores for motion-picture and magnetic film rolls -- Dimensions
- ISO-1188 - Cinematography -- Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film -- Specifications
- ISO-1189 - Cinematography -- Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints -- Specifications
- ISO-1201 - Cinematography -- 8 mm motion-picture film with picture -- Location and width of magnetic striping and gaps of recording and reproducing magnetic heads for magnetic sound record
- ISO-12222 - Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film - Specifications and dimensions
- ISO-1223 - Cinematography - Picture areas for motion-picture films for television - Position and dimensions
- ISO-12606 - Cinematography -- Care and preservation of magnetic audio recordings for motion pictures and television
- ISO-12611 - Cinematography - Audio head tones for use in international exchange of 35 mm analogue magnetic film masters - Specifications and location
- ISO-12612 - Cinematography - Interchange of post-production sprocket-based materials
- ISO-162 - Cinematography -- Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture -- Positions and width dimensions
- ISO-1700 - Cinematography -- 8 mm Type S motion-picture raw stock film -- Cutting and perforating dimensions
- ISO-17266 - Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions
- ISO-17332 - Cinematography -- Manufacturer-printed latent image identification information for 35 mm motion-picture colour-print film -- Specifications
- ISO-1780 - Cinematography -- Motion-picture camera cartridge, 8 mm Type S Model I -- Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness -- Dimensions and specifications
- ISO-1785 - Cinematography -- Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) -- Position and dimensions
- ISO-20859 - Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
- ISO-24 - Withdrawn and No Longer Available
- ISO-2404 - Cinematography -- Six-track magnetic sound records on 70 mm striped release prints -- Locations and dimensions
- ISO-2467 - Cinematography - Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints - Positions and dimensions
- ISO-2863 - Cinematography -- Motion-picture camera cartridge, 8 mm Type S Model II -- Run length of film -- Dimensions and specifications
- ISO-2906 - Cinematography - Image area produced by camera aperture on 35 mm motion-picture film - Position and dimensions
- ISO-2907 - Cinematography - Maximum projectable image area on 35 mm motion-picture film - Position and dimensions
- ISO-2939 - Cinematography - Picture image area on 35 mm motion-picture release prints - Position and dimensions and analogue and digital photographic sound to picture record displacement
- ISO-2966 - Cinematography -- 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) -- Cutting and perforating dimensions
- ISO-2968 - Cinematography -- Recorded characteristics for magnetic sound record on 8 mm Type S motion- picture prints and full-coat magnetic film perforated 8 mm Type S -- Specifications
- ISO-3022 - Cinematography -- 35 mm motion-picture film perforated 16 mm (1-3-0) -- Cutting and perforating dimensions
- ISO-3023 - Cinematography -- 65 mm and 70 mm unexposed motion-picture film -- Cutting and perforating dimensions
- ISO-3024 - Cinematography -- Motion-picture camera cartridge, 8 mm type S, model 1 -- Camera run length, perforation cut-out and end-of-run notch in film -- Specifications
- ISO-3026 - Cinematography -- Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667) -- Position and dimensions
- ISO-3042 - Cinematography -- Labelling of containers for raw-stock motion-picture films and magnetic films -- Minimum information specifications
- ISO-3047 - Cinematography -- Spool, daylight loading type, for 35 mm motion-picture cameras (capacity 30 m - 100 ft) -- Dimensions
- ISO-3067 - Corrigendum
- ISO-3068 - Cinematography - Magnetic Stripes for Sound Records on 16 MMMOTION- Picture Film Perforat
- ISO-359 - Cinematography -- Projectable image area on 16 mm motion-picture prints -- Dimensions and location
- ISO-3640 - Cinematography -- Motion-picture prints and sound records for international exchange of television programmes -- Specifications
- ISO-3641 - Cinematography -- Motion-picture camera cartridge, 8 mm Type S Model II -- Cartridge fit and take-up core drive -- Dimensions and specifications
- ISO-3642 - Cinematography -- Cemented or welded splices on 8 mm Type S motion-picture film for projector use -- Dimensions
- ISO-3645 - Cinematography -- Image area produced by 8 mm Type S motion-picture camera aperture and maximum projectable image area -- Positions and dimensions
- ISO-3646 - Cinematography -- Motion-picture camera cartridge, 8 mm Type S Model II -- Slots, projections and cartridge hole for indicating film speed, colour balance and film identification -- Dimensions and positions
- ISO-3654 - Cinematography -- Motion-picture camera cartridge, 8-mm Type S, Model I -- Cartridge-camera interface and take-up core drive -- Dimensions and specifications
- ISO-3773 - Cinematography -- Tape splices for 8 mm Type S motion-picture film for projector use -- Dimensions
- ISO-3774 - Cinematography -- 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) -- Cutting and perforating dimensions
- ISO-3775 - Cinematography -- Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3) -- Position and dimensions
- ISO-4238 - Cinematography -- Optical printing ratios for enlargement and reduction of motion-picture film images -- Specifications
- ISO-4241 - Cinematography - Projection film leader (time-based), trailer and cue marks - Specifications
- ISO-4242 - Cinematography -- Recording head gaps for two sound records on 16 mm magnetic film -- Positions and width dimensions
- ISO-4243 - Cinematography -- Picture image area and photographic sound record on 16 mm motion-picture release prints -- Positions and dimensions
- ISO-4244 - Cinematography -- Photographic sound record on 8 mm Type S motion-picture prints -- Position and width dimensions
- ISO-466 - Cinematography -- Image produced by 16 mm motion-picture camera aperture -- Position and dimensions
- ISO-4834 - Cinematography -- Magnetic sound test films excluding striped release prints -- Basic technical characteristics
- ISO-486 - Cinematography -- 16 mm motion-picture film perforated 8 mm Type R -- Cutting and perforating dimensions
- ISO-490 - Cinematography -- Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) -- Positions and width dimensions
- ISO-491 - Cinematography - 35 mm motion-picture film and magnetic film - Cutting and perforating dimensions
- ISO-5758 - Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials
- ISO-5768 - Cinematography -- Image produced by camera aperture Type W on 16 mm motion-picture film -- Position and dimensions
- ISO-6025 - Cinematography -- Analogue photographic sound test films, 35 mm and 16 mm -- Specifications
- ISO-6035 - Cinematography -- Viewing conditions for the evaluation of films and slides for television -- Colours, luminances and dimensions
- ISO-6036 - Cinematography -- Colour motion-picture prints and slides for television -- Density specifications
- ISO-6038 - Cinematography -- Splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films -- Dimensions and locations
- ISO-69 - Cinematography -- 16 mm motion-picture and magnetic film -- Cutting and perforating dimensions
- ISO-6903 - Cinematography -- Motion-picture camera cartridge, 8 mm Type S, Model 1 (capacity 60 m) -- Cartridge-camera interface and sprocket drive -- Dimensions and specifications
- ISO-70 - Cinematography -- 35 mm negative photographic sound record on 35 mm motion-picture film -- Position and maximum width dimensions
- ISO-71 - Cinematography - 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film - Positions and dimensions
- ISO-7343 - Cinematography -- Two-track photographic sound records on 35 mm motion-picture prints -- Positions and width dimensions
- ISO-74 - Cinematography -- Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film -- Positions and dimensions
- ISO-7453 - Cinematography -- Sound motion-picture camera cartridge, 8 mm Type S Model II -- Cartridge-camera fit and take-up core drive -- Dimensions and specifications
- ISO-7454 - Cinematography -- Sound motion-picture camera cartridge, 8 mm Type S Model II -- Camera run length and end notches in film -- Dimensions and specifications
- ISO-7455 - Cinematography -- Sound motion-picture camera cartridge, 8 mm Type S Model II -- Slots and projection for film speed, cartridge hole and projection for film identification and colour-balancing filter -- Dimensions and positions
- ISO-7456 - Cinematography -- Sound motion-picture camera cartridge, 8 mm Type S Model II -- Film load position
- ISO-7739 - Cinematography - Two-track photographic analogue sound records on 16 mm motion-picture prints - Positions and width dimensions
- ISO-7831 - Cinematography -- A-chain frequency response for reproduction of 35 mm photographic sound -- Reproduction characteristics
- ISO-7832 - Cinematography - Photoelectric output factor of photographic-type audio-level test films - Measurement and calibration
- ISO-8001 - Cinematography -- Underexposed motion-picture film requiring forced development -- Designation method
- ISO-8395 - Cinematography -- Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes -- Specifications
- ISO-8400 - Cinematography -- Position of emulsion surface of 16 mm motion-picture prints -- Identification
- ISO-8567 - Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions
- ISO-8590 - Cinematography -- Audio records on 70 mm motion-picture release prints with magnetic stripes -- Recorded characteristic
- ISO-8622 - Cinematography -- Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes -- A-chain reproduction characteristics
- ISO-8687 - Cinematography -- Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records -- Method of measurement
- ISO-8758 - Cinematography -- Photographic control and data records on 16 mm and 35 mm motion-picture film and prints -- Dimensions and location
- ISO-9525 - Cinematography -- Recording head gaps for two sound records on 17,5 mm magnetic film -- Positions and width dimensions