Document Center List of Standards on Photographic Paper, Films And Plates. Cartridges
ICS Code 37.040.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E115 - Standard Practice for Photographic Processing in Optical Emission Spectrographic Analysis (Withdrawn 2002)
- ASTM-E1735 - Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV
- ASTM-E2244 - Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer (Withdrawn 2023)
- ASTM-E2245 - Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer (Withdrawn 2023)
- ASTM-E2246 - Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer (Withdrawn 2023)
- ASTM-F2296 - Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods—Score/Tape, Cross Hatch, X-Cut, and Crease-Folding (Withdrawn 2020)
- ASTM-F727 - Test Method for Measuring Transmittance of See-Through Photoplate (Withdrawn 1996)
- ASTM-F947 - Standard Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films (Withdrawn 2005)
BSI:
- BS-1772 - Specification for Sizes of Black-and-White Photographic Sheet Film for General, Profes
- BS-1917 - Specification for Slides and Film Strips
- BS-3206 - Specification for sizes of rolls of photographic black-and-white and colour paper for roll-head printers
- BS-5706 - Methods for the determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers: methylene blue photometric method and silver sulphide densitometric method
- BS-ISO-1007 - Photography. 135-size film and magazine. Specifications
- BS-ISO-1009 - Photography. Paper dimensions. Rolls for printers
- BS-ISO-10214 - Photography. Processed photographic materials. Filing enclosures for storage
- BS-ISO-10505 - Photography. Root mean square granularity of photographic films. Method of measurement
- BS-ISO-11312 - Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements
- BS-ISO-14546 - Photography. Aerial films and spools. Dimensions
- BS-ISO-14548 - Photography. Dimensions of glass plates
- BS-ISO-14808 - Photography. Composition of 135-film canisters
- BS-ISO-18901 - Imaging materials. Processed silver-gelatin-type black-and-white films. Specifications for stability
- BS-ISO-18902 - Imaging materials. Processed imaging materials. Albums, framing and storage materials
- BS-ISO-18903 - Imaging materials. Films and paper. Determination of dimensional change
- BS-ISO-18904 - Imaging materials. Processed films. Method for determining lubrication
- BS-ISO-18905 - Imaging materials. Ammonia-processed diazo photographic film. Specifications for stability
- BS-ISO-18906 - Imaging materials. Photographic films. Specifications for safety film
- BS-ISO-18907 - Imaging materials. Photographic films and papers. Wedge test for brittleness
- BS-ISO-18908 - Imaging materials. Photographic film. Determination of folding endurance
- BS-ISO-18909 - Photography. Processed photographic colour films and paper prints. Methods for measuring image stability
- BS-ISO-18910 - Imaging materials. Photographic film and paper. Determination of curl
- BS-ISO-18911 - Imaging materials. Processed safety photographic films. Storage practices
- BS-ISO-18912 - Imaging materials. Processed vesicular photographic film. Specifications for stability
- BS-ISO-18913-TC - Tracked Changes. Imaging materials. Permanence. Vocabulary
- BS-ISO-18914 - Imaging materials. Photographic film and papers. Method for determining the resistance of photographic emulsions to wet abrasion
- BS-ISO-18915 - Imaging materials. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
- BS-ISO-18917 - Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide
- BS-ISO-18918 - Imaging materials. Processed photographic plates. Storage practices
- BS-ISO-18919 - Photography. Thermally processed silver microfilm. Specifications for stability
- BS-ISO-18920 - Imaging materials. Reflection prints. Storage practices
- BS-ISO-18923 - Imaging materials. Polyester-base magnetic tape. Storage practices
- BS-ISO-18924 - Imaging materials. Test method for Arrhenius-type predictions
- BS-ISO-18928 - Imaging materials. Unprocessed photographic films and papers. Storage practices
- BS-ISO-18929 - Imaging materials. Wet-processed silver-gelatin type black-and-white photographic reflection prints. Specifications for dark storage
- BS-ISO-18936 - Imaging materials. Processed colour photographs. Methods for measuring thermal stability
- BS-ISO-18937 - Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability
- BS-ISO-18937-1 - Imaging materials. Methods for measuring indoor light stability of photographic prints
- BS-ISO-18937-1-TC - Tracked Changes. Imaging materials. Methods for measuring indoor light stability of photographic prints
- BS-ISO-18937-2 - Imaging materials. Methods for measuring indoor light stability of photographic prints
- BS-ISO-18937-2-TC - Tracked Changes. Imaging materials. Methods for measuring indoor light stability of photographic prints
- BS-ISO-18941 - Imaging materials. Colour reflection prints. Test method for ozone gas fading stability
- BS-ISO-18944 - Imaging materials. Reflection colour photographic prints. Test print construction and measurement
- BS-ISO-18946 - Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
- BS-ISO-18946-TC - Tracked Changes. Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
- BS-ISO-18947 - Imaging materials. Photographic reflection prints. Determination of abrasion resistance of photographic images
- BS-ISO-18947-1 - Imaging materials and prints. Abrasion resistance
- BS-ISO-18947-2 - Imaging materials and prints. Abrasion resistance
- BS-ISO-18949 - Imaging materials. Reflection colour photographic prints. Method for testing stability under low humidity conditions
- BS-ISO-18951-2 - Imaging materials. Scratch resistance of photographic prints
- BS-ISO-3772 - Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements
- BS-ISO-5466 - Photography. Processed safety photographic films. Storage practices
- BS-ISO-6221 - Photography. Films and papers. Determination of dimensional change
- BS-ISO-6328 - Photography. Photographic materials. Determination of ISO resolving power
- BS-ISO-732 - Photography. 120-size and 220-size films. Dimensions
- BS-ISO-897 - Photography. Roll films, 126, 110 and 135- size films. Identification of the image-bearing side
- PD-ISO-18950 - Imaging materials. Photographic prints. Effect of light sources on degradation under museum conditions
- PD-ISO-20791-1 - Photography. Photographic reflection prints
- PD-ISO-20791-2 - Photography. Photographic reflection prints
- PD-ISO-20791-3 - Photography. Photographic reflection prints
- PD-ISO-21139-1 - Permanence and durability of commercial prints
- PD-ISO-21139-21 - Permanence and durability of commercial prints
- PD-ISO-21139-22 - Permanence and durability of commercial prints
- PD-ISO/PAS-18940-1 - Imaging materials. Image permanence specification of reflection photographic prints for indoor applications
ISO:
- ISO-1007 - Photography -- 135-size film and magazine -- Specifications
- ISO-1008 - Photography -- Paper dimensions -- Pictorial sheets
- ISO-1009 - Photography -- Paper dimensions -- Rolls for printers
- ISO-1011 - Photography -- Colour paper for roll paper printers -- Sizes of rolls
- ISO-1012 - Photography -- Films in sheets and rolls for general use -- Dimensions
- ISO-10214 - Photography -- Processed photographic materials -- Filing enclosures for storage
- ISO-10505 - Photography - Root mean square granularity of photographic films - Method of measurement
- ISO-10602 - Photography -- Processed silver-gelatin type black-and-white film -- Specifications for stability
- ISO-10977 - Photography -- Processed photographic colour films and paper prints -- Methods for measuring image stability
- ISO-11312 - Photography -- Sheets of sensitized material for the pre-press industry -- Dimensions and related requirements
- ISO-12206 - Photography -- Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
- ISO-13450 - Photography -- 110-size cartridge, film and backing paper -- Dimensions
- ISO-14523 - Photography -- Processed photographic materials -- Photographic activity test for enclosure materials
- ISO-14535 - Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements
- ISO-14546 - Photography -- Aerial films and spools -- Dimensions
- ISO-14548 - Photography - Dimensions of glass plates
- ISO-14807 - Photography - Transmission and reflection densitometers - Method for determining performance
- ISO-18055-1 - Photography and imaging - Inkjet media: Classification, nomenclature and dimensions - Part 1: Photo-grade media (paper and film)
- ISO-18901 - Imaging materials - Processed silver-gelatin-type black-and-white films - Specifications for stability
- ISO-18902 - Imaging materials - Processed imaging materials - Albums, framing and storage materials
- ISO-18903 - Imaging materials - Films and paper - Determination of dimensional change
- ISO-18904 - Imaging materials -- Processed films -- Method for determining lubrication
- ISO-18905 - Imaging materials - Ammonia-processed diazo photographic film - Specifications for stability
- ISO-18906 - Imaging materials -- Photographic films -- Specifications for safety film
- ISO-18907 - Imaging materials - Photographic films and papers - Wedge test for brittleness
- ISO-18908 - Imaging materials -- Photographic film -- Determination of folding endurance
- ISO-18909 - Photography - Processed photographic colour films and paper prints - Methods for measuring image stability
- ISO-18910 - Imaging materials -- Photographic film and paper --- Determination of curl
- ISO-18911 - Imaging materials - Processed safety photographic films - Storage practices
- ISO-18912 - Imaging materials - Processed vesicular photographic film - Specifications for stability
- ISO-18913 - Imaging materials - Permanence - Vocabulary
- ISO-18914 - Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion
- ISO-18915 - Imaging materials -- Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
- ISO-18917 - Photography -- Determination of residual thiosulfate and other related chemicals in processed photographic materials -- Methods using iodine-amylose, methylene blue and silver sulfide
- ISO-18918 - Imaging materials - Processed photographic plates - Storage practices
- ISO-18919 - Imaging materials -- Thermally processed silver microfilm -- Specifications for stability
- ISO-18920 - Imaging materials - Reflection prints - Storage practices
- ISO-18922 - Imaging materials - Processed photographic films - Methods for determining scratch resistance
- ISO-18924 - Imaging materials - Test method for Arrhenius-type predictions
- ISO-18928 - Imaging materials - Unprocessed photographic films and papers - Storage practices
- ISO-18929 - Imaging materials - Wet-processed silver-gelatin type black-and-white photographic reflection prints - Specifications for dark storage
- ISO-18931 - Imaging materials - Recommendations for humidity measurement and control
- ISO-18936 - Imaging materials - Processed colour photographs - Methods for measuring thermal stability
- ISO-18937 - Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability
- ISO-18937-1 - Imaging materials - Methods for measuring indoor light stability of photographic prints - Part 1: General guidance and requirements
- ISO-18937-2 - Imaging materials - Methods for measuring indoor light stability of photographic prints - Part 2: Xenon arc lamp exposure
- ISO-18941 - Imaging materials - Colour reflection prints - Test method for ozone gas fading stability
- ISO-18942 - Imaging materials - Evaluation of image permanence of photographic colour prints in consumer home applications
- ISO-18944 - Imaging materials - Reflection colour photographic prints - Test print construction and measurement
- ISO-18946 - Imaging materials - Reflection colour photographic prints - Method for testing humidity fastness
- ISO-18947 - Imaging materials - Photographic reflection prints - Determination of abrasion resistance of photographic images
- ISO-18947-1 - Imaging materials and prints - Abrasion resistance - Part 1: General rub testing methods
- ISO-18947-2 - Imaging materials and prints - Abrasion resistance - Part 2: Rub testing of photographic prints
- ISO-18949 - Imaging materials - Reflection colour photographic prints - Method for testing stability under low humidity conditions
- ISO-18950 - Imaging materials -Photographic prints - Effect of light sources on degradation under museum conditions
- ISO-18951-1 - Imaging materials - Scratch resistance of photographic prints - Part 1: General test method
- ISO-18951-2 - Imaging materials - Scratch resistance of photographic prints - Part 2: Sclerometer test method
- ISO-20791-1 - Photography - Photographic reflection prints - Part 1: Evaluation methods of image quality
- ISO-20791-2 - Photography - Photographic reflection prints - Part 2: Evaluation of colour variation in printing
- ISO-20791-3 - Photography - Photographic reflection prints - Part 3: Evaluation of glossiness
- ISO-21139-1 - Permanence and durability of commercial prints - Part 1: Definition of use profiles and guiding principles for specifications
- ISO-21139-21 - Permanence and durability of commercial prints - Part 21: In-window display - Light and ozone stability
- ISO-21139-22 - Permanence and durability of commercial prints - Part 22: Backlit display in indoor or shaded outdoor conditions - Light stability
- ISO-2240 - Photography - Colour reversal camera films - Determination of ISO speed
- ISO-3772 - Photography -- Rolls of sensitized material for the pre-press industry -- Dimensions and related requirements
- ISO-5-3 - Photography and graphic technology - Density measurements - Part 3: Spectral conditions
- ISO-5800 - Photography -- Colour negative films for still photography -- Determination of ISO speed
- ISO-6 - Photography -- Black-and-white pictorial still camera negative film/process systems -- Determination of ISO speed
- ISO-6148 - Photography -- Micrographic films, spools and cores -- Dimensions
- ISO-6328 - Photography -- Photographic materials -- Determination of ISO resolving power
- ISO-6846 - Photography -- Black-and-white continuous-tone papers -- Determination of ISO speed and ISO range for printing
- ISO-686 - Photography -- 35 mm filmstrips -- Specifications for double-frame and single-frame formats
- ISO-7187 - Photography -- Materials for direct-positive colour-print cameras -- Determination of ISO speed
- ISO-732 - Photography -- 120-size and 220-size films -- Dimensions
- ISO-7829 - Photography -- Black-and-white aerial camera films -- Determination of ISO speed and average gradient
- ISO-8374 - Photography - Determination of ISO safelight conditions
- ISO-897 - Photography -- Roll films, 126, 110 and 135-size films -- Identification of the image-bearing side
- ISO-9378 - Photography -- Vesicular microfilm -- Determination of ISO speed and ISO range
- ISO-9848 - Photography - Source document microfilms - Determination of ISO speed and ISO average gradient
- ISO/PAS-18940-1 - Imaging materials - Image permanence specification of reflection photographic prints for indoor applications - Part 1: Test methods
Other SDOs:
- DIN-ISO-18901 - Imaging materials - Processed silver-gelatin-type black-and-white films - Specifications for stability (ISO 18901:2010)
- DIN-ISO-18906 - Imaging Materials - Photographic Films, Specifications for Safety Film
- DIN-ISO-18910 - Imaging Materials - Photographic Film & Paper - Determination of Curl
- DIN-ISO-18928 - Imaging materials - Unprocessed photographic films and papers - Storage practices
- DIN-ISO-2240 - Photography, Colour Reversal Camera Films, Determination of ISO Speed
- DIN-ISO-897 - Photography, Roll Films, 126, 110 & 135-Size Films, Identification of the Image-Bearin
- SS-EN-ISO-11699-2 - Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)
- SS-ISO-18901 - Imaging materials - Processed silver-gelatin type black-and-white films - Specifications for stability
- SS-ISO-18902 - Imaging materials - Processed imaging materials - Albums, framing and storage materials (ISO 18902:2007, IDT)
- SS-ISO-18905 - Imaging materials - Ammonia processed diazo photographic film - Specifications for stability
- SS-ISO-18911 - Imaging materials - Processed safety photographic films - Storage practices (ISO 18911:2010, IDT)
- SS-ISO-18912 - Imaging materials - Processed vesicular photographic film - Specifications for stability
- SS-ISO-18918 - Photography - Processed photographic plates - Storage practices
- SS-ISO-18920 - Imaging materials - Reflection prints - Storage practices (ISO 18920:2011, IDT)
- SS-ISO-18924 - Imaging materials - Test method for Arrhenius-type predictions
- SS-ISO-18928 - Imaging materials - Unprocessed photographic films and papers - Storage practices