Document Center is acquired by Nimonik

Document Center List of Standards on Rf Connectors

ICS Code 33.120.30

Return to ICS Index.

Up to Level 2:

• 33.120 (Components and accessories for telecommunications equipment Plug-and-socket devices, connectors, see 31.220.10 Switches, see 31.220.20)

The following documents are a part of this series:

BSI:

• BS-3041-1 - Radio-frequency connectors. Specification for general requirements and measuring methods
• BS-3041-12 - Radio-frequency connectors. Specification for r.f. coaxial connectors with screw coupling, unmatched (type UHF)
• BS-3041-2 - Radio-frequency connectors. Specification for coaxial unmatched connector
• BS-3041-7 - Radio-frequency connectors. R.F. coaxial connectors with inner diameter of output conductor 9,5 mm (0,374 in) with bayonet lock. Characteristic impedance 50 ohms (Type C)
• BS-9210 - Specification for radio frequency connectors of assessed quality: generic data and methods of test
• BS-9210-N0009-2 - Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling
• BS-9210-N007-1 - Detail specification for radio frequency connectors (type SMB)
• BS-9210-N007-2 - Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings
• BS-CECC-22000 - Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
• BS-EN-122200 - Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series TNC
• BS-EN-122340 - Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series MMCX
• BS-EN-60169-21 - Radio-frequency connectors. Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B)
• BS-EN-60169-23 - Radio-frequency connectors. Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
• BS-EN-60169-24 - Radio-frequency connectors. Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
• BS-EN-60169-25 - Radio-frequency connectors. Two-pole screw ($9L-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN)
• BS-EN-61169-1 - Radio-frequency connectors
• BS-EN-61169-11 - Radio-frequency connectors
• BS-EN-61169-14 - Radio-frequency connectors
• BS-EN-61169-16 - Radio-frequency connectors
• BS-EN-61169-2 - Radio-frequency connectors
• BS-EN-61169-24 - Radio-frequency connectors
• BS-EN-61169-29 - Radio-frequency connectors
• BS-EN-61169-31 - Radio-frequency connectors
• BS-EN-61169-32 - Radio-frequency connectors
• BS-EN-61169-35 - Radio-frequency connectors
• BS-EN-61169-37 - Radio-frequency connectors
• BS-EN-61169-39 - Radio-frequency connectors
• BS-EN-61169-40 - Radio-frequency connectors
• BS-EN-61169-42 - Radio-frequency connectors
• BS-EN-61169-43 - Radio-frequency connectors
• BS-EN-61169-44 - Radio-frequency connectors
• BS-EN-61169-45 - Radio-frequency connectors
• BS-EN-61169-47 - Radio-frequency connectors
• BS-EN-61169-48 - Radio-frequency connectors
• BS-EN-61169-49 - Radio-frequency connectors
• BS-EN-61169-50 - Radio-frequency connectors
• BS-EN-61169-51 - Radio-frequency connectors
• BS-EN-61169-52 - Radio-frequency connectors
• BS-EN-61169-53 - Radio-frequency connectors
• BS-EN-61169-54 - Radio-frequency connectors
• BS-EN-61169-58 - Radio-frequency connectors
• BS-EN-61169-59 - Radio-frequency connectors
• BS-EN-61169-8 - Radio-frequency connectors
• BS-EN-61726 - Cable assemblies, cables, connectors and passive microwave components Screening attenuation measurement by the reverberation chamber method
• BS-EN-62037 - RF connectors, connector cable assemblies and cables. Intermodulation level measurement
• BS-EN-62037-1 - Passive RF and microwave devices, intermodulation level measurement
• BS-EN-62037-2 - Passive RF and microwave devices, intermodulation level measurement
• BS-EN-62680-1-3 - Universal serial bus interfaces for data and power
• BS-EN-62680-1-3-TC - Tracked Changes. Universal serial bus interfaces for data and power
• BS-EN-62810 - Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
• BS-EN-IEC-61169-10 - Radio- frequency connectors
• BS-EN-IEC-61169-1-2 - Radio-frequency connectors
• BS-EN-IEC-61169-1-4 - Radio-frequency connectors
• BS-EN-IEC-61169-15 - Radio-frequency connectors
• BS-EN-IEC-61169-17 - Radio-frequency connectors
• BS-EN-IEC-61169-21 - Radio-frequency connectors
• BS-EN-IEC-61169-24 - Radio-frequency connectors
• BS-EN-IEC-61169-54 - Radio frequency connectors
• BS-EN-IEC-61169-60 - Radio-frequency connectors
• BS-EN-IEC-61169-61 - Radio-frequency connectors
• BS-EN-IEC-61169-63 - Radio-frequency connectors
• BS-EN-IEC-61169-64 - Radio frequency connectors
• BS-EN-IEC-61169-65 - Radio-frequency connectors
• BS-EN-IEC-61169-66 - Radio-frequency connectors
• BS-EN-IEC-61169-67 - Radio frequency connectors
• BS-EN-IEC-61169-68 - Radio-frequency connectors
• BS-EN-IEC-61169-71 - Radio-frequency connectors
• BS-EN-IEC-61726 - Cable assemblies, cables, connectors and passive microwave component Screening attenuation measurement by the reverberation chamber method
• BS-EN-IEC-62037-1 - Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62037-1-TC - Tracked Changes. Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62037-2 - Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62037-2-TC - Tracked Changes. Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62037-7 - Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62037-8 - Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62680-1-3 - Universal serial bus interfaces for data and power
• BS-EN-IEC-62680-1-3-TC - Tracked Changes. Universal serial bus interfaces for data and power
• BS-EN-IEC-62680-1-8 - Universal serial bus interfaces for data and power
• BS-EN-IEC-63137-1 - Standard test radio-frequency connectors
• BS-EN-IEC-63138-1 - Multi-channel radio frequency connectors
• BS-EN-IEC-63138-2 - Multi-channel radio-frequency connectors
• BS-EN-IEC-63138-2-TC - Tracked Changes. Multi-channel radio-frequency connectors
• BS-EN-IEC-63138-3 - Multi-channel radio frequency connectors
• BS-EN-IEC-63185 - Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
• BS-EN-IEC-63295 - Specification for WB series glass beads with 50 O impedance for RF connectors
• BS-IEC-63171-7 - Connectors for electrical and electronic equipment
• BS-QC-221100 - Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling. Characteristic impedance 50 ohms (Type SMA)
• BS-QC-221200 - Radio-Frequency Connectors. Rf Coaxial Connectors With Inner Diameter of Outer Conduct
• DD-IEC/PAS-61169-18 - Radio-frequency connectors
• DD-IEC/PAS-61169-19 - Radio-Frequency Connectors, Sectional Specification for Ssmb Series R.F. Coaxial Conne
• DD-IEC/PAS-61169-35 - Radio-frequency connectors
• DD-IEC/PAS-61169-39 - Radio-Frequency Connectors, Sectional Specification for Cqm Series Quick Lock Rf Conn
• DD-IEC/PAS-61169-4 - Radio-frequency connectors
• DD-IEC/PAS-61169-40 - Radio-Frequency Connectors, Sectional Specification for 2.4 Series R.F. Connectors
• DD-IEC/PAS-61169-41 - Radio-Frequency Connectors, Sectional Specification for CQA- Series Quick Lock R.F. C
• DD-IEC/PAS-61169-44 - Radio-frequency connectors. Sectional specification for series SMP push-on radio-frequency coaxial connectors
• PD-IEC-61169-1-51 - Radio frequency connectors

IEC:

• IEC-1141 - Upper frequency limit of r.f. coaxial connectors
• IEC-1169-1-1 - Radio frequency connectors - Part 1-1: Single multi-series dual language blank detail specification (BDS)
• IEC-1169-1-ENGLISH/F - Radio frequency connectors - Part 1-1: Single multi-series dual language blank detail specification (BDS)
• IEC-1169-33 - Radio-frequency connectors - Part 33: Sectional Specification (SS) for Type BMA R.F. connectors
• IEC-1169-36 - Radio-frequency connectors - Part 36: Microminiature r.f. connectors with snap-on coupling - Characteristic impedance 50 Ohms (Type MCX)
• IEC-169-1 - Radio-frequency connectors. Part 1: General requirements and measuring methods
• IEC-169-10 - Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)
• IEC-169-10-1 - Amendment No. 1
• IEC-169-10-2 - Amendment No. 2 to IEC 169-10
• IEC-169-11 - Radio-frequency connectors. Part 11: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with screw coupling - Characteristic impedance 50 ohms (Type 4.1/9.5)
• IEC-169-1-1 - Radio-frequency connectors - Part 1: General requirements and measuring methods - Section One: Electrical tests and measuring procedures: Reflection factor
• IEC-169-12 - Radio-frequency connectors. Part 12: R.F. coaxial connectors with screw coupling, unmatched (Type UHF)
• IEC-169-13 - Radio-frequency connectors - Part 13: R.F. coaxial connectors with inner diameter of outer conductor 5.6 mm (0.22 in) - Characteristic impedance 75 ohms (Type 1.6/5.6) - Characteristic impedance 50 ohms (Type 1.8/5.6) with similar mating dimensions
• IEC-169-1-3 - Radio-frequency connectors - Part 1: General requirements and measuring methods - Section Three: Electrical tests and measuring procedures: Screening effectiveness
• IEC-169-1-3-1 - Amendment No. 1
• IEC-169-13-1 - Amendment No. 1 to IEC 169-13
• IEC-169-15 - Radio-frequency connectors. Part 15: R.F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in) with screw coupling - Characteristic impedance 50 ohms (Type SMA)
• IEC-169-15-1 - Amendment No. 1 to IEC 169-15
• IEC-169-17 - Radio-frequency connectors. Part 17: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)
• IEC-169-17-1 - Amendment No. 1
• IEC-169-1-AM1 - Amendment No. 1 to IEC 169-1
• IEC-169-20 - Radio-frequency connectors. Part 20: R.F. coaxial connectors with inner diameter of outer conductor of 2.08 mm (0.082 in) screw coupling. Characteristic impedance 50 ohms (Type SSMC)
• IEC-169-21 - Radio-frequency connectors. Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (Types SC-A and SC-B)
• IEC-169-21-1 - Amendment No. 1 to IEC 169-21
• IEC-169-22 - Radio-frequency connectors. Part 22: R.F. two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors (Type BNO)
• IEC-169-23 - Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)
• IEC-169-25 - Radio-frequency connectors - Part 25: Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN)
• IEC-169-27 - Radio-frequency connectors - Part 27: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (Type E)
• IEC-169-28 - Radio-frequency connectors - Part 28: Radio-frequency coaxial connectors with inner diameter of outer conductor of 5,60 mm (0,220 in) with snap-on coupling - Characteristic impedance 75 ohms
• IEC-169-3 - Radio-frequency connectors. Part 3: Two-pin connector for twin balanced aerial feeders
• IEC-169-5 - Radio-frequency connectors. Part 5: R.F. coaxial connectors for cables 96 IEC 50-17 and larger
• IEC-169-6 - Radio-frequency connectors. Part 6: R.F. coaxial connectors for cables 96 IEC 75-17 and larger
• IEC-169-7 - Radio-frequency connectors. Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C)
• IEC-169-7-1 - Amendment No. 1
• IEC-169-9 - Radio-frequency connectors. Part 9: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC)
• IEC-169-9-1 - Amendment No. 1 to IEC 169-9
• IEC-339-1 - General purpose rigid coaxial transmission lines and their associated flange connectors. Part 1: General requirements and measuring methods
• IEC-457-1 - Rigid precision coaxial and their associated precision connectors. Part 1: General requirements and measuring methods
• IEC-457-2 - Rigid precision coaxial and their associated precision connectors. Part 2: 50 ohms 7 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector
• IEC-457-3 - Rigid precision coaxial and their associated precision connectors. Part 3: 14 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedances 50 ohms and 75 ohms
• IEC-457-4 - Rigid precision coaxial and their associated precision connectors. Part 4: 21 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedance 50 ohms (Type 9/21) - Characteristic impedance 75 ohms (Type 6/21)
• IEC-457-5 - Rigid precision coaxial and their associated precision connectors. Part 5: 50 ohms 3.5 mm rigid precision coaxial line with provision for mounting connectors
• IEC-61169-1 - Corrigendum 1 - Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
• IEC-61169-10 - Radio-frequency connectors - Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 (Type SMB)
• IEC-61169-11 - Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - characteristic impedance 50 ohms (Type 4,1-9,5)
• IEC-61169-1-2 - Radio-frequency connectors - Part 1-2: Electrical test methods - Insertion loss
• IEC-61169-14 - Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12)
• IEC-61169-1-4 - Radio-frequency connectors . Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient
• IEC-61169-15 - Radio-frequency connectors - Part 15: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling - Characteristic impedance 50 (type SMA)
• IEC-61169-1-51 - Radio frequency connectors - Part 1-51: Technical specification of electrical tests - Uncertainty specification of frequency domain test for return loss
• IEC-61169-16 - Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristics impedance 50 ohms (75 ohms) (type N)
• IEC-61169-1-6 - Radio-frequency connectors - Part 1-6: Electrical test methods - RF power
• IEC-61169-17 - Radio-frequency connectors - Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)
• IEC-61169-18 - Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA
• IEC-61169-19 - Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB
• IEC-61169-21 - Radio-frequency connectors - Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling - Characteristic impedance 50 ohms (Type SC)
• IEC-61169-29 - Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type (TITLE TRUNCATED)
• IEC-61169-31 - Radio frequency connectors - Part 31: RF coaxial with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0)
• IEC-61169-32 - Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type 1,85)
• IEC-61169-35 - Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors
• IEC-61169-37 - Radio-frequency connectors - Part 37: Sectional specification - STWX8 R.F connectors
• IEC-61169-39 - Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors
• IEC-61169-40 - Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors
• IEC-61169-41 - Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors
• IEC-61169-42 - Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors
• IEC-61169-43 - Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors
• IEC-61169-44 - Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors
• IEC-61169-45 - Radio-frequency connectors - Part 45: Sectional specification for SQMA series quick lock RF coaxial connectors
• IEC-61169-47 - Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)
• IEC-61169-49 - Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F. connectors
• IEC-61169-51 - Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI)
• IEC-61169-52 - Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors
• IEC-61169-53 - Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 Ω (Type S7-16)
• IEC-61169-54 - Radio frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ohms, Series 4.3-10
• IEC-61169-58 - Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA)
• IEC-61169-59 - Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors
• IEC-61169-60 - Radio-frequency connectors - Part 60: Sectional specification for RF coaxial connectors with push on mating - Characteristic impedance 50 Ohm (type SMPM)
• IEC-61169-61 - Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9.5 mm inner diameter of outer conductor with quick lock coupling series Q4.1-9.5
• IEC-61169-63 - Radio frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)
• IEC-61169-64 - Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 (type 0,8)
• IEC-61169-65 - Radio-frequency connectors - Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50
• IEC-61169-66 - Radio-frequency connectors - Part 66: Sectional specification for RF coaxial connectors with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling, characteristic impedance 50 (series 2,2-5)
• IEC-61169-67 - Radio frequency connectors - Part 67: Sectional specification for series TRL threaded triaxial connectors
• IEC-61169-68 - Radio-frequency connectors - Part 68: Sectional specification for series TRK bayonet coupling triaxial connectors
• IEC-61169-71 - Radio-frequency connectors - Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5,0 mm - Characteristic impedance 50 Ohms (type NEX10®)
• IEC-61726 - Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
• IEC-62037 - Rf Connectors, Connector Cable Assemblies, & Cable - Intermodulation Level Measurement
• IEC-62680-1-3 - Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® cable and connector specification
• IEC-62680-1-8 - Universal serial bus interfaces for data and power - Part 1-8: Common components . USB Audio 3.0 device class definition terminal types
• IEC-62810 - Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
• IEC-63137-1 - Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods
• IEC-63138-1 - Multi-channel radio frequency connectors - Part 1: Generic specification - General requirements and test methods
• IEC-63138-2 - Multi-channel radio-frequency connectors - Part 2: Sectional specification for MQ4 series circular connectors
• IEC-63138-2-RL - Multi-channel radio-frequency connectors - Part 2: Sectional specification for MQ4 series circular connectors
• IEC-63138-3 - Multi-channel radio frequency connectors - Part 3: Sectional specification for MQ5 series circular connectors
• IEC-63185 - Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
• IEC-63295 - Specification for WB series glass beads with 50 impedance for RF connectors
• IEC-803 - Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors
• IEC-803-1 - Amendment No. 1
• IEC/PAS-61169-18 - Part 18: Sectional Specification - Radio Frequency Coaxial Connectors of Type Ssma, RA
• IEC/PAS-61169-19 - Part 19: Sectional Specification for Ssmb Series R.F. Coaxial Connectors, Radio-Freque
• IEC/PAS-61169-35 - Part 35: Sectional Specification - Radio Frequency Coaxial Connectors of Type 2,92, RA
• IEC/PAS-61169-40 - Part 40: Sectional Specification for 2.4 Series R.F Connectors, Radio-Frequency Connec
• IEC/PAS-61169-41 - Part 41: Sectional Specification for Cqa Series Quick Lock R.F. Coaxial Connectors, RA
• IEC/PAS-61169-42 - Part 42: Sectional Specification for Cqn Series Quick Lock Rf Coaxial Connectors, Radi
• IEC/PAS-61169-43 - Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors
• IEC/PAS-61169-44 - Part 44: Sectional Specification for Smp Push-on Radio-Frequency Coaxial Connectors, R

Other SDOs:

• EN-122340 - Harmonized System of Quality Assessment for Electronic Components, Sectional Specifica
• EN-61169-1 - Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods
• EN-61169-11 - Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 O (type 4,1-9,5)
• EN-61169-14 - Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12)
• EN-61169-16 - Radio-Frequency Connectors, Sectional Specification, Rf Coaxial Connectors With Inner
• EN-61169-18 - Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA
• EN-61169-19 - Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB
• EN-61169-24 - Part 24: Sectional Specification - Radio Frequency Coaxial Connectors With Screw Coupl
• EN-61169-35 - Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors
• EN-61169-37 - Radio-Frequency Connectors, Sectional Specification for Stwx8 R.F Connectors
• EN-61169-39 - Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors
• EN-61169-40 - Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors
• EN-61169-41 - Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors
• EN-61169-42 - Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors
• EN-61169-43 - Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors
• EN-61169-44 - Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors
• EN-61169-45 - Radio-frequency connectors -Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors
• EN-61169-47 - Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 O cable networks (type F-Quick)
• EN-61169-48 - Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors
• EN-61169-49 - Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors
• EN-61169-50 - Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA)
• EN-61169-51 - Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 O (type QLI)
• EN-61169-52 - Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors
• EN-61169-53 - Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 Ohm (Type S7-16)
• EN-61169-54 - Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 O, series 4,3-10
• EN-61169-58 - Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 O (type SBMA)
• EN-61169-59 - Radio-frequency connectors -Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors
• EN-61169-8 - Radio-Frequency Connectors, Sectional Specification, Rf Coaxial Connectors With Inner
• EN-61726 - Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
• EN-62680-1-3 - Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB Type-CGäó cable and connector specification
• EN-62810 - Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods