Document Center is acquired by Nimonik

Document Center List of Standards on Wires And Symmetrical Cables

ICS Code 33.120.20

Return to ICS Index.

Up to Level 2:

• 33.120 (Components and accessories for telecommunications equipment Plug-and-socket devices, connectors, see 31.220.10 Switches, see 31.220.20)

The following documents are a part of this series:

ASTM:

• ASTM-A111 - Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
• ASTM-B911 - Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
• ASTM-B986 - Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application

BSI:

• BS-3573 - Specification for Polyolefin Copper-Conductor Telecommunication Cables
• BS-4808-1 - Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. General requirements and tests
• BS-4808-2 - Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. Equipment wires with solid or stranded conductors, unscreened, single
• BS-4808-3 - Specification for l.F. Cables and Wires With Pvc Insulation and Pvc Sheath for Telecommun
• BS-4808-4 - Equipment Wires With Solid or Stranded Conductors, Unscreened, in Pairs, Triples, Quad
• BS-4808-5 - Cables With Solid or Stranded Conductors, Screened and Sheathed, One Pair
• BS-EN-50288-10-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-2-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-3-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-4-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-5-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-5-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-6-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-6-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-9-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50289-1-1 - Communication cables. Specifications for test methods
• BS-EN-50289-1-12 - Communication cables. Specifications for test methods
• BS-EN-50289-1-1-TC - Tracked Changes. Communication cables. Specifications for test methods
• BS-EN-50289-1-8-TC - Tracked Changes. Communication cables. Specifications for test methods
• BS-EN-50289-1-9 - Communication cables. Specifications for test methods
• BS-EN-50289-1-9-TC - Tracked Changes. Communication cables. Specifications for test methods
• BS-EN-50289-3-1 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-11 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-12 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-16 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-4 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-5 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-6 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-7 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-8 - Communication cables. Specifications for test methods
• BS-EN-50289-3-9 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-4-1 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50289-4-2 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50289-4-9 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50298-1-8 - Communication cables. Specifications for test methods. Electrical test methods. Attenuation
• BS-EN-50407-3 - Multi-pair cables used in high bit rate digital access telecommunications networks
• BS-EN-50412-2-1 - Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz
• BS-EN-61169-38 - Radio-frequency connectors
• BS-EN-61935-2 - Specification for the testing of balanced and coaxial information technology cabling
• BS-EN-61935-2-20 - Testing of balanced communication cabling in accordance with series EN 50173
• BS-EN-61935-3 - Testing of balanced and coaxial information technology cabling
• BS-EN-62012-1 - Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments
• BS-EN-62680-1-3 - Universal serial bus interfaces for data and power
• BS-EN-62680-1-3-TC - Tracked Changes. Universal serial bus interfaces for data and power
• BS-EN-IEC-62680-1-3 - Universal serial bus interfaces for data and power
• BS-EN-IEC-62680-1-3-TC - Tracked Changes. Universal serial bus interfaces for data and power
• BS-EN-IEC-62680-1-5 - Universal serial bus interfaces for data and power
• BS-EN-IEC-62680-1-6 - Universal serial bus interfaces for data and power
• BS-EN-IEC-62680-1-8 - Universal serial bus interfaces for data and power
• BS-IEC-61156-10 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-11 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-12 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-13 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-1-4 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-1-4-TC - Tracked Changes. Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-15 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-7 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-61156-9 - Multicore and symmetrical pair/quad cables for digital communications
• BS-IEC-62783-1-1 - Twinax cables for digital communications
• DD-IEC-61169-38 - Radio-Frequency Connectors, Sectional Specification, Radio Frequency Coaxial Connector
• DD-IEC/PAS-61156-1-4 - Multicore and symmetrical pair/quad cables for digital communications
• DD-IEC/PAS-61169-38 - Radio-Frequency Connectors, Sectional Specification, Radio Frequency Coaxial Connector
• PD-IEC-61156-1-2 - Multicore and symmetrical pair/quad cables for digital communications
• PD-IEC-61156-1-2-TC - Tracked Changes. Multicore and symmetrical pair/quad cables for digital communications
• PD-IEC-61156-1-5 - Multicore and symmetrical pair/quad cables for digital communications
• PD-IEC-61156-1-6 - Multicore and symmetrical pair/quad cables for digital communications
• PD-IEC-62222 - Fire performance of communication cables installed in buildings
• PD-IEC-62839-1 - Environmental declaration
• PD-IEC-62839-2 - Environmental declaration

IEC:

• IEC-60189-1 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
• IEC-60189-1-RL - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
• IEC-61156-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
• IEC-61156-10 - Multicore and symmetrical pair/quad cables for digital communications - Part 10: Cables for cords with transmission characteristics up to 2 GHz - Sectional specification
• IEC-61156-11 - Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz - Horizontal floor wiring - Sectional specification
• IEC-61156-1-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification
• IEC-61156-11-RL - Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
• IEC-61156-12 - Multicore and symmetrical pair/quad cables for digital communications - Part 12: Symmetrical single pair cables with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification
• IEC-61156-1-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables
• IEC-61156-1-2-AM1 - AMENDMENT 1, Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of Symmetrical pair/quad cables
• IEC-61156-1-3 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables
• IEC-61156-1-4 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Assessment of conductor heating in bundled cables due to the deployment of remote powering
• IEC-61156-15 - Multicore and symmetrical pair/quad cables for digital communications - Part 15: Symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to fire performance characteristics - Sectional specification
• IEC-61156-1-5 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-5: Correction procedures for the measurement results of return loss and input impedance
• IEC-61156-1-6 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-6: Nominal DC-resistance values of floor-wiring and work-area cables for digital communications
• IEC-61156-1/A1 - Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
• IEC-61156-1/A2 - Amendment 2: Multicore & Symmetrical Pair/Quad Cables for Digital Communications - Mul
• IEC-61156-1-RL - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
• IEC-61156-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification
• IEC-61156-2-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification
• IEC-61156-2-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring - Capability Approval - Sectional specification
• IEC-61156-3 - Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification
• IEC-61156-3-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification
• IEC-61156-3-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring - Capability Approval - Sectional specification
• IEC-61156-4 - Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification
• IEC-61156-4-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification
• IEC-61156-4-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables - Capability approval - Sectional specification
• IEC-61156-5 - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification
• IEC-61156-5-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification
• IEC-61156-5-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Capability approval - Sectional specification
• IEC-61156-5-AM1 - Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification
• IEC-61156-5-RL - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification
• IEC-61156-6 - Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification
• IEC-61156-6-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Blank detail specification
• IEC-61156-6-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Work area wiring - Capability approval - Sectional specification
• IEC-61156-6-AM1 - Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification
• IEC-61156-6-RL - Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification
• IEC-61156-7 - Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables
• IEC-61156-7-1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Blank detail specification for digital and analog communication cables
• IEC-61156-7-2 - Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Capability Approval - Sectional specification for digital and analog communication cables
• IEC-61156-7-AM1 - Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables
• IEC-61156-7-RL - Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables
• IEC-61156-8 - Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification
• IEC-61156-8-AM1 - Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification
• IEC-61156-8-RL - Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification
• IEC-61156-9 - Multicore and symmetrical pair/quad cables for digital communications - Part 9: Cables for channels with transmission characteristics up to 2 GHz - Sectional specification
• IEC-61169-38 - Part 38: Sectional Specification - Radio Frequency Coaxial Connectors Model, Slide-in
• IEC-61196-1-103 - Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
• IEC-61935-2 - Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
• IEC-61935-2-20 - Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications
• IEC-61935-2-CMV - Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
• IEC-61935-3 - Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
• IEC-62012-1 - Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
• IEC-62153-4-12 - Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method
• IEC-62153-4-9 - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
• IEC-62222 - Fire performance of communication cables installed in buildings
• IEC-62255-1 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification
• IEC-62255-2 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification
• IEC-62255-2-1 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled cables - Blank detail specification
• IEC-62255-3 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification
• IEC-62255-3-1 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled cables - Blank detail specification
• IEC-62255-4 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification
• IEC-62255-4-1 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification
• IEC-62255-5 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification
• IEC-62255-5-1 - Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification
• IEC-62680-1-3 - Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® cable and connector specification
• IEC-62680-1-5 - Universal serial bus interfaces for data and power . Part 1-5: Common components . USB Audio 3.0 device class definition
• IEC-62680-1-6 - Universal serial bus interfaces for data and power . Part 1-6: Common components . USB Audio 3.0 device class definition basic functions
• IEC-62680-1-8 - Universal serial bus interfaces for data and power - Part 1-8: Common components . USB Audio 3.0 device class definition terminal types
• IEC-62783-1 - Twinax cables for digital communications - Part 1: Generic specification
• IEC-62783-1-1 - Twinax cables for digital communications - Part 1-1: Time domain test methods for twinax cables for digital communications - General requirements
• IEC-62783-2 - Twinax cables for digital communications - Part 2: Family specification . Cable for Ethernet-over-twinax physical interfaces
• IEC-62807-1 - Hybrid telecommunication cables - Part 1: Generic specification
• IEC-62807-3 - Hybrid telecommunication cables - Part 3: Outdoor hybrid cables - Sectional specification
• IEC-62839-1 - Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
• IEC-62839-2 - Environmental declaration - Part 2: Optical/copper telecom accessories products specific rules
• IEC/PAS-61156-1-4 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Conductor heating of bundled data grade cables for limited power transmission based on IEEE 802.3
• IEC/PAS-61169-38 - Part 38: Sectional Specification - Radio-Frequency Coaxial Connectors Model, Slide-in
• IEC/PAS-61935-2-20 - Part 2-20: Work Area Cord for Class D Applications - Blank Detail Specification, Gener

Other SDOs:

• CISPR-16-1-2-2 - Amendment 2: Specification for Radio Disturbance & Immunity Measuring Apparatus & Met
• EN-50288-10-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
• EN-50288-2-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
• EN-50288-3-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
• EN-50288-3-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
• EN-50288-4-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
• EN-50288-4-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
• EN-50288-5-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
• EN-50288-5-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
• EN-50288-6-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
• EN-50288-6-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
• EN-50288-9-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
• EN-50289-1-1 - Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements
• EN-50289-1-11 - Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
• EN-50289-1-9 - Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
• EN-50289-3-1 - Communication Cables, Specifications for Test Methods, Mechanical Test Methods, Genera
• EN-50407-3 - Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
• EN-61169-38 - Radio-Frequency Connectors, Sectional Specification, Radio Frequency Coaxial Connector
• EN-61935-2 - Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
• EN-61935-2-20 - Part 2-20: Patch Cords & Work Area Cords - Blank Detail Specification for Class D Appl
• EN-61935-3 - Part 3: Installed Cabling as Specified in En-50173-4 & Related Standards, Testing of B
• EN-62680-1-3 - Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB Type-CGäó cable and connector specification
• UNE-EN-50289-1-17 - Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT