Document Center is acquired by Nimonik

Document Center List of Standards on Coaxial Cables. Waveguides

ICS Code 33.120.10

Return to ICS Index.

Up to Level 2:

• 33.120 (Components and accessories for telecommunications equipment Plug-and-socket devices, connectors, see 31.220.10 Switches, see 31.220.20)

The following documents are a part of this series:

ASTM:

• ASTM-D4730 - Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
• ASTM-D4731 - Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
• ASTM-D4732 - Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable

BSI:

• BS-2316-1&2 - Specification for Radio-Frequency Cables, General Requirements & Tests, British Govern
• BS-2316-3 - Specification for Radio-Frequency Cables, Cable Data Sheets (Metric & Imperial Units)
• BS-5425-1 - Coaxial cable for wideband distribution systems. Specification for single unit, semi-airspaced cables for wideband distribution systems
• BS-9220-N001 - Detail specification for ordinary rectangular (2:1) rigid waveguide tubing. Standard wall thickness. General application category
• BS-9220-N002 - Detail specification for medium flat rectangular (4:1) rigid waveguide tubing. Standard wall thickness. General application category
• BS-9220-N003 - Detail specification for flat rectangular (8.33:1) rigid waveguide tubing. Standard wall thickness. General application category
• BS-9220-N004 - Detail specification for circular rigid waveguide tubing. Standard wall thickness. General application category
• BS-EN-50117-1 - Coaxial cables
• BS-EN-50117-10-1 - Coaxial cables
• BS-EN-50117-10-2 - Coaxial cables
• BS-EN-50117-11-1 - Coaxial cables
• BS-EN-50117-11-2 - Coaxial cables
• BS-EN-50117-2 - Coaxial cables. Sectional specification for indoor drop cables
• BS-EN-50117-2-1 - Coaxial cables
• BS-EN-50117-2-2 - Coaxial cables
• BS-EN-50117-2-3 - Coaxial cables
• BS-EN-50117-2-4 - Coaxial cables
• BS-EN-50117-2-5 - Coaxial cables
• BS-EN-50117-3-1 - Coaxial cables. Sectional specifications for cables used in telecom applications
• BS-EN-50117-4-1 - Coaxial cables
• BS-EN-50117-4-2 - Coaxial cables
• BS-EN-50117-9-1 - Coaxial cables
• BS-EN-50117-9-2 - Coaxial cables
• BS-EN-50117-9-3 - Coaxial cables
• BS-EN-50288-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-10-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-10-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-11-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-11-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-12-1 - Multi-element metallic cables used in analogue and digital communications and control
• BS-EN-50288-2-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-3-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-7 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-8 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-9-1 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50288-9-2 - Multi-element metallic cables used in analogue and digital communication and control
• BS-EN-50289-1-1 - Communication cables. Specifications for test methods
• BS-EN-50289-1-10 - Communication cables. Specifications for test methods. Electrical test methods
• BS-EN-50289-1-16 - Communication cables. Specifications for test methods
• BS-EN-50289-1-17 - Communication cables. Specifications for test methods
• BS-EN-50289-1-2 - Communication cables. Specifications for test methods
• BS-EN-50289-1-2-TC - Tracked Changes. Communication cables. Specifications for test methods
• BS-EN-50289-1-3 - Communication cables. Specifications for test methods. Electrical test methods
• BS-EN-50289-1-4 - Communication cables. Specifications for test methods. Electrical test methods
• BS-EN-50289-1-5 - Communication cables. Specifications for test methods. Electrical test methods
• BS-EN-50289-1-6 - Communication cables. Specifications for test methods. Electrical test methods
• BS-EN-50289-1-7 - Communication cables. Specifications for test methods. Electrical test methods
• BS-EN-50289-1-8 - Communication cables. Specifications for test methods
• BS-EN-50289-1-9 - Communication cables. Specifications for test methods
• BS-EN-50289-3-10 - Communication cables. Specifications for tests methods
• BS-EN-50289-3-17 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-2 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-8 - Communication cables. Specifications for test methods
• BS-EN-50289-4-11 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50289-4-16 - Communication cables. Specifications for test methods
• BS-EN-50289-4-16-TC - Tracked Changes. Communication cables. Specifications for test methods
• BS-EN-50289-4-17 - Communication cables. Specifications for test methods
• BS-EN-50289-4-17-TC - Tracked Changes. Communication cables. Specifications for test methods
• BS-EN-50289-4-4 - Communication cables. Specifications for test methods
• BS-EN-50289-4-5 - Communication cables. Specifications for test methods
• BS-EN-50289-4-6 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50289-4-7 - Communication cables. Specifications for test methods
• BS-EN-50290-1-2 - Communication cables
• BS-EN-50290-2-1 - Communication cables
• BS-EN-50290-2-20 - Communication cables
• BS-EN-50290-2-20-TC - Tracked Changes. Communication cables
• BS-EN-50290-2-21 - Communication cables
• BS-EN-50290-2-22 - Communication cables
• BS-EN-50290-2-23 - Communication cables
• BS-EN-50290-2-24 - Communication cables
• BS-EN-50290-2-25 - Communication cables
• BS-EN-50290-2-27 - Communication cables
• BS-EN-50290-2-28 - Communication cables. Common design rules and construction
• BS-EN-50290-2-29 - Communication cables
• BS-EN-50290-2-29-TC - Tracked Changes. Communication cables
• BS-EN-50290-2-30 - Communication cables. Common design rules and construction
• BS-EN-50290-2-33 - Communication cables
• BS-EN-50290-2-35 - Communication cables
• BS-EN-50290-2-36 - Communication cables
• BS-EN-50290-2-37 - Communication cables
• BS-EN-50290-2-38 - Communication cables
• BS-EN-50290-4-1 - Communication cables
• BS-EN-50290-4-1-TC - Tracked Changes. Communication cables
• BS-EN-50290-4-2 - Communication cables
• BS-EN-50441-1 - Cables for indoor residential telecommunication installations
• BS-EN-50441-2 - Cables for indoor residential telecommunication installations
• BS-EN-50441-3 - Cables for indoor residential telecommunication installations
• BS-EN-50441-4 - Cables for indoor residential telecommunication installations
• BS-EN-50599 - Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
• BS-EN-50601 - Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
• BS-EN-50602 - Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Unscreened straight patch cords and straight work area cords for class E applications. Detail specification
• BS-EN-50603 - Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class E applications. Detail specification
• BS-EN-60153-1 - Hollow metallic waveguides
• BS-EN-60153-2 - Hollow metallic waveguides
• BS-EN-60153-4 - Hollow metallic waveguides
• BS-EN-60154-1 - Flanges for waveguides
• BS-EN-60154-1-TC - Tracked Changes. Flanges for waveguides
• BS-EN-60154-2 - Flanges for waveguides
• BS-EN-60154-2-TC - Tracked Changes. Flanges for waveguides
• BS-EN-60154-4 - Flanges for waveguides
• BS-EN-60728-1-2 - Cable networks for television signals, sound signals and interactive services
• BS-EN-60966-1 - Radio frequency and coaxial cable assemblies
• BS-EN-60966-2-1 - Radio frequency and coaxial cable assemblies
• BS-EN-60966-2-3 - Radio frequency and coaxial cable assemblies
• BS-EN-60966-2-4 - Radio Frequency and coaxial cable assemblies
• BS-EN-60966-2-5 - Radio frequency and coaxial cable assemblies
• BS-EN-60966-2-6 - Radio frequency and coaxial cable assemblies
• BS-EN-60966-2-7 - Radio frequency and coaxial cable assemblies
• BS-EN-60966-3 - Radio frequency and coaxial cable assemblies
• BS-EN-60966-3-1 - Radio frequency and coaxial cable assemblies
• BS-EN-61076-1-TC - Connectors for electronic equipment. Product requirements
• BS-EN-61076-3-104 - Connectors for electrical and electronic equipment. Product requirements
• BS-EN-61196-10 - Coaxial communication cables
• BS-EN-61196-10-1 - Coaxial communication cables
• BS-EN-61196-2 - Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
• BS-EN-61338-1-3 - Waveguide type dielectric resonators.
• BS-EN-61580-1 - Methods of measurement for waveguides. Decoupling and rotation of the plane of polarization
• BS-EN-61580-2 - Methods of measurement for waveguides. Level of intermodulation products
• BS-EN-61580-3 - Methods of measurement for waveguides. Variation of group delay
• BS-EN-61580-4 - Methods of measurement for waveguides
• BS-EN-61580-6 - Methods of measurement for waveguides
• BS-EN-61580-7 - Methods of measurement for waveguides
• BS-EN-61580-8 - Methods of measurement for waveguides
• BS-EN-61580-9 - Methods of measurement for waveguides
• BS-EN-61726 - Cable assemblies, cables, connectors and passive microwave components Screening attenuation measurement by the reverberation chamber method
• BS-EN-61935-1 - Specification for the testing of balanced and coaxial information technology cabling
• BS-EN-62153-1 - Metallic Communication Cables Test Methods, Electrical, Measurement of the Pulse/Step
• BS-EN-62153-1-1 - Metallic communication cables test methods
• BS-EN-62153-4-7 - Metallic communication cable test methods
• BS-EN-62431 - Reflectivity of electromagnetic wave absorbers in millimetre wave frequency. Measurement methods
• BS-EN-IEC-60153-4 - Hollow metallic waveguides
• BS-EN-IEC-60709 - Nuclear power plants. Instrumentation, control and electrical systems important to safety. Separation
• BS-EN-IEC-60966-1 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-2-1 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-2-1-TC - Tracked Changes. Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-2-2 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-2-2-TC - Tracked Changes. Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-2-8 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-3 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-3-1 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-3-1-TC - Tracked Changes. Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-3-3 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-3-4 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-3-TC - Tracked Changes. Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-4 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-4-1 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-4-1-TC - Tracked Changes. Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-4-2 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-4-3 - Radio frequency and coaxial cable assemblies
• BS-EN-IEC-60966-4-TC - Tracked Changes. Radio frequency and coaxial cable assemblies
• BS-EN-IEC-61076-3-126 - Connectors for electrical and electronic equipment. Product requirements
• BS-EN-IEC-61169-1-5 - Radio frequency connectors
• BS-EN-IEC-61726 - Cable assemblies, cables, connectors and passive microwave component Screening attenuation measurement by the reverberation chamber method
• BS-EN-IEC-62037-2 - Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62037-2-TC - Tracked Changes. Passive RF and microwave devices, intermodulation level measurement
• BS-EN-IEC-62153-4-15 - Metallic cables and other passive components test methods
• BS-EN-IEC-62153-4-16 - Metallic cables and other passive components test methods
• BS-EN-IEC-62153-4-5 - Metallic communication cable test methods
• BS-EN-IEC-62153-4-7-TC - Tracked Changes. Metallic cables and other passive components test methods
• BS-EN-IEC-63138-1 - Multi-channel radio frequency connectors
• BS-EN-IEC-63138-2 - Multi-channel radio-frequency connectors
• BS-EN-IEC-63138-2-TC - Tracked Changes. Multi-channel radio-frequency connectors
• BS-EN-IEC-63138-3 - Multi-channel radio frequency connectors
• BS-IEC-60096-0-1 - Radio frequency cables
• BS-IEC-61196-11 - Coaxial communication cables
• BS-IEC-61196-1-100 - Coaxial communication cables
• BS-IEC-61196-11-1 - Coaxial communication cables
• BS-IEC-61196-1-114 - Coaxial communication cables
• BS-IEC-61196-1-116 - Coaxial communication cables
• BS-IEC-61196-1-119 - Coaxial communication cables
• BS-IEC-61196-1-119-TC - Tracked Changes. Coaxial communication cables
• BS-IEC-61196-1-123 - Coaxial communication cables
• BS-IEC-61196-1-125 - Coaxial communication cable
• BS-IEC-61196-1-126 - Coaxial communication cables
• BS-IEC-61196-1-127 - Coaxial communication cables
• BS-IEC-61196-12 - Coaxial communication cables
• BS-IEC-61196-1-200 - Coaxial communication cables
• BS-IEC-61196-1-206 - Coaxial communication cables
• BS-IEC-61196-13 - Coaxial communication cables
• BS-IEC-61196-1-326 - Coaxial communication cables
• BS-IEC-61196-4-1 - Coaxial communication cables
• BS-IEC-61196-6-1 - Coaxial communication cables
• BS-IEC-61196-7 - Coaxial communication cables
• BS-IEC-61196-8 - Coaxial communication cables
• BS-IEC-61196-8-1 - Coaxial communication cables
• BS-IEC-61196-9 - Coaxial communication cables
• BS-IEC-61196-9-1 - Coaxial communication cables
• BS-IEC-61196-9-11 - Coaxial communication cables
• BS-IEC-61196-9-1-TC - Tracked Changes. Coaxial communication cables
• BS-IEC-61935-1-1 - Specification for the testing of balanced and coaxial information technology cabling
• BS-IEC-61935-1-2 - Specification for the testing of balanced and coaxial information technology cabling
• BS-IEC-61935-2-21 - Specification for the testing of balanced and coaxial information technology cabling
• BS-IEC-61935-2-22 - Specification for the testing of balanced and coaxial information technology cabling
• BS-IEC-61935-2-23 - Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801
• BS-IEC-61935-2-24 - Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801
• BS-IEC-61935-2-25 - Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801
• BS-IEC-62153-4-10 - Metallic communication cable test methods
• BS-IEC-62153-4-15 - Metallic Communication Cable test methods
• BS-IEC-62153-4-17 - Metallic cables and other passive components. Test methods
• BS-IEC-62153-4-3 - Metallic communication cable test methods
• BS-IEC-62153-4-6 - Metallic cables and other passive components test methods
• BS-IEC-62153-4-8 - Metallic cables and other passive components. Test methods
• BS-IEC-62153-4-9 - Metallic communication cable test methods
• DD-IEC/PAS-61338-1-5 - Waveguide type dielectric resonators
• DD-IEC/PAS-62255-1 - Multi-pair cables used in high bit rate digital access telecommunication networks
• DD-IEC/PAS-62260 - Pulse/step return loss from measurement in the frequency domain using the inverse discrete fourier transformation (IDFT)
• PAS-35491 - Design and installation of telecommunications and broadcast infrastructure within the home. Code of practice
• PD-CLC-50117-8 - Coaxial cables used in cabled distribution networks
• PD-IEC-62153-4-1 - Metallic communication cable test methods
• PD-IEC-62839-1 - Environmental declaration

IEC:

• IEC-1196-2 - Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
• IEC-1196-3-1 - Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s
• IEC-153-1 - Hollow metallic waveguides. Part 1: General requirements
• IEC-153-2 - Hollow metallic waveguides. Part 2: Relevant specifications for ordinary rectangular waveguides
• IEC-153-3 - Hollow metallic waveguides. Part 3: Relevant specifications for flat rectangular waveguides
• IEC-153-4 - Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
• IEC-153-6 - Hollow metallic waveguides - Part 6: Relevant specifications for medium flat rectangular waveguides
• IEC-153-6-1 - Amendment No. 1
• IEC-153-7 - Hollow metallic waveguides - Part 7: Relevant specifications for square waveguides
• IEC-154-1 - Flanges for waveguides. Part 1: General requirements
• IEC-154-1-1 - Amendment No. 1
• IEC-154-2 - Flanges for waveguides. Part 2: Relevant specifications for flanges for ordinary rectangular waveguides
• IEC-154-3 - Flanges for waveguides. Part 3: Relevant specifications for flanges for flat rectangular waveguides
• IEC-154-4 - Flanges for waveguides. Part 4: Relevant specifications for flanges for circular waveguides
• IEC-154-6 - Flanges for waveguides. Part 6: Relevant specifications for flanges for medium flat rectangular waveguides
• IEC-154-7 - Flanges for waveguides - Part 7: Relevant specifications for flanges for square waveguides
• IEC-1580 - Measurement of return loss on waveguide and waveguide assemblies
• IEC-261 - Sealing test for pressurized waveguide tubing and assemblies
• IEC-339-2 - General purpose rigid coaxial transmission lines and their associated flange connectors - Part 2: Detail specifications
• IEC-374 - Guide for choosing modular dimensions for waveguide components
• IEC-60050-726-AM1 - Amendment 1 - International electrotechnical vocabulary - Part 726: Transmission lines and waveguides
• IEC-60050-726-AM2 - Amendment 2 - International electrotechnical vocabulary - Part 726: Transmission lines and waveguides
• IEC-60050-726-AM3 - Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides
• IEC-60050-726-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides
• IEC-60050-726-AM5 - Amendment 5 - International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides
• IEC-60050-726-AM6 - Amendment 6 - International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides
• IEC-60050-726-AM7 - Amendment 7 - International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides
• IEC-60096-0-1 - Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables
• IEC-60096-0-1-1 - Amendment 1 - Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables
• IEC-60153-1 - Hollow metallic waveguides - Part 1: General requirements and measuring methods
• IEC-60153-2 - Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides
• IEC-60153-4 - Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
• IEC-60154-1 - Flanges for waveguides - Part 1: General requirements
• IEC-60154-2 - Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides
• IEC-60154-2-1 - Amendment No. 1
• IEC-60154-4 - Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides
• IEC-60728-1-2 - Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation
• IEC-60966-1 - Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
• IEC-60966-2-1 - Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
• IEC-60966-2-2 - Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies
• IEC-60966-2-3 - Part 2-3: Detail Specification for Flexible Coaxial Cable Assemblies - Frequency Range
• IEC-60966-2-4 - Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
• IEC-60966-2-5 - Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
• IEC-60966-2-6 - Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
• IEC-60966-2-7 - Radio frequency and coaxial cable asemblies - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors
• IEC-60966-3 - Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
• IEC-60966-3-1 - Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
• IEC-60966-3-2 - Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
• IEC-60966-3-3 - Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable
• IEC-60966-3-4 - Radio frequency and coaxial cable assemblies - Part 3-4: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable
• IEC-60966-4 - Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
• IEC-60966-4-1 - Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
• IEC-61076-3-104 - Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
• IEC-61076-3-126 - Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
• IEC-61169-1-5 - Radio frequency connectors - Part 1-5: Electrical test methods - Rise time degradation
• IEC-61196-1 - Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements
• IEC-61196-10 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with fluoropolymer dielectric
• IEC-61196-10-1 - Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables with fluoropolymer dielectric
• IEC-61196-11 - Coaxial communication cables - Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric
• IEC-61196-1-1 - Coaxial communication cables - Part 1-1: Capability approval for coaxial cables
• IEC-61196-1-100 - Coaxial communication cables - Part 1-100: Electrical test methods - General requirements
• IEC-61196-1-100-RL - Coaxial communication cables - Part 1-100: Electrical test methods - General requirements
• IEC-61196-1-101 - Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable
• IEC-61196-1-102 - Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
• IEC-61196-1-103 - Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
• IEC-61196-1-104 - Coaxial communication cables - Part 1-104: Electrical test methods - Test for the stability of the capacitance of cable versus temperature
• IEC-61196-1-105 - Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
• IEC-61196-1-105-RL - Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
• IEC-61196-1-106 - Coaxial communication cables - Part 1-106: Electrical test methods - Test for withstand voltage of cable sheath
• IEC-61196-1-107 - Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise)
• IEC-61196-1-108 - Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
• IEC-61196-11-1 - Coaxial communication cables - Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric
• IEC-61196-1-110 - Coaxial communication cables - Part 1-110: Electrical test methods - Test for continuity
• IEC-61196-1-111 - Coaxial communication cables - Part 1-111: Electrical test methods - Stability of phase test methods
• IEC-61196-1-112 - Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance)
• IEC-61196-1-113 - Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant
• IEC-61196-1-114 - Coaxial communication cables - Part 1-114: Electrical test methods - Test for inductance
• IEC-61196-1-115 - Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss)
• IEC-61196-1-116 - Coaxial communication cables - Part 1-116: Electrical test methods - Test for impedance with time domain reflectometry (TDR)
• IEC-61196-1-119 - Coaxial communication cables - Part 1-119: Electrical test methods - RF power for coaxial cables and cable assemblies
• IEC-61196-1-119-RL - Coaxial communication cables - Part 1-119: Electrical test methods - RF average power rating
• IEC-61196-1-122 - Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables
• IEC-61196-1-123 - Coaxial communication cables - Part 1-123: Electrical test methods - Test for attenuation constant of radiating cable
• IEC-61196-1-124 -

  Coaxial communication cables - Part 1-124: Electrical test methods - Test for coupling loss of radiating cable

• IEC-61196-1-125 -

  Coaxial communication cable - Part 1-125: Electrical test methods - Test for equivalent permittivity and equivalent dissipation factor of dielectric

• IEC-61196-1-126 - Coaxial communication cables - Part 1-126: Electrical test methods - Corona extinction voltage
• IEC-61196-1-127 - Coaxial communication cables - Part 1-127: Electrical test methods - Link loss of radiating cable
• IEC-61196-12 - Coaxial communication cables - Part 12: Specification for spacer clamps for radiating cables
• IEC-61196-1-200 - Coaxial communication cables - Part 1-200: Environmental test methods - General requirements
• IEC-61196-1-200-RL - Coaxial communication cables - Part 1-200: Environmental test methods - General requirements
• IEC-61196-1-201 - Coaxial communication cables - Part 1-201: Environmental test methods - Test for cold bend performance of cable
• IEC-61196-1-203 - Coaxial communication cables - Part 1-203: Environmental test methods - Test for water penetration of cable
• IEC-61196-1-205 - Coaxial communication cables - Part 1-205: Environmental test methods - Resistance to solvents and contaminating fluids
• IEC-61196-1-206 - Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence
• IEC-61196-1-208 - Coaxial communication cables - Part 1-208: Environmental test methods - Longitudinal pneumatic resistance
• IEC-61196-1-209 - Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling
• IEC-61196-1-212 - Coaxial communication cables - Part 1-212: Environmental test methods - UV stability
• IEC-61196-1-215 - Coaxial communication cables - Part 1-215: Environmental test methods - High temperature cable ageing
• IEC-61196-13 - Coaxial communication cables - Part 13 - Sectional specification for semi-rigid cables with silicon dioxide dielectric
• IEC-61196-1-301 - Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality
• IEC-61196-1-302 - Coaxial communication cables - Part 1-302: Mechanical test methods - Test for eccentricity
• IEC-61196-1-303 - Coaxial communication cables - Part 1-303: Mechanical test methods - Test for silver and tin plating thickness
• IEC-61196-1-304 - Coaxial communication cables - Part 1-304: Mechanical test methods - Impact resistance
• IEC-61196-1-305 - Coaxial communication cables - Part 1-305: Mechanical test methods - Solderability and resistance to soldering
• IEC-61196-1-308 - Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
• IEC-61196-1-310 - Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals
• IEC-61196-1-313 - Coaxial communication cables - Part 1-313: Mechanical test methods - Adhesion of dielectric and sheath
• IEC-61196-1-314 - Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending
• IEC-61196-1-316 - Coaxial communication cables - Part 1-316: Mechanical test methods - Test of maximum pulling force of cable
• IEC-61196-1-317 - Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable
• IEC-61196-1-318 - Coaxial communication cables - Part 1-318: Mechanical test methods - Heat performance tests
• IEC-61196-1-324 - Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable
• IEC-61196-1-325 - Coaxial communication cables - Part 1-325: Mechanical test methods - Aeolian vibration
• IEC-61196-1-326 - Coaxial communication cables - Part 1-326: Mechanical test methods - Hanger test
• IEC-61196-1/AM 1 - Amendment 1: Radio-Frequency Cables - Part 1: Generic Specification - General, Definit
• IEC-61196-3 - Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks
• IEC-61196-3-2 - Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horinzontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks for 185 m reach and up to 10 Mb/s.
• IEC-61196-3-3 - Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
• IEC-61196-4 - Coaxial communication cables - Part 4: Sectional specification for radiating cables
• IEC-61196-4-1 - Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables
• IEC-61196-4-1-RL - Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables
• IEC-61196-4-CMV - Coaxial communication cables - Part 4: Sectional specification for radiating cables
• IEC-61196-5 - Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables
• IEC-61196-5-1 - Coaxial communication cables - Part 5-1: Blank detail specification for CATV trunk and distribution cables
• IEC-61196-5 CMV - Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables
• IEC-61196-6 - Coaxial communication cables - Part 6: Sectional specification for CATV drop cables
• IEC-61196-6-1 - Coaxial communication cables - Part 6-1: Blank detail specification for CATV drop cables
• IEC-61196-6-2 - Coaxial communication cables - Part 6-2: Detail specification for 75-4 type CATV drop cables
• IEC-61196-6-2-RL - Coaxial communication cables - Part 6-2: Detail specification for 75-4 type CATV drop cables
• IEC-61196-6-3 - Coaxial communication cables - Part 6-3: Detail specification for 75-5 type CATV drop cables
• IEC-61196-6-3-RL - Coaxial communication cables - Part 6-3: Detail specification for 75-5 type CATV drop cables
• IEC-61196-6-4 - Coaxial communication cables - Part 6-4: Detail specification for 75-7 type CATV drop cables
• IEC-61196-6-4-RL - Coaxial communication cables - Part 6-4: Detail specification for 75-7 type CATV drop cables
• IEC-61196-6-5 - Coaxial communication cables - Part 6-5: Detail specification for Type A quad-shield CATV drop cables with screening class A++
• IEC-61196-7 - Coaxial communication cables - Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 15018 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
• IEC-61196-8 - Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with fluoropolymer dielectric
• IEC-61196-8-1 - Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with fluoropolymer dielectric
• IEC-61196-8-2 - Coaxial communication cables - Part 8-2: Detail specification for 50-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-8-3 - Coaxial communication cables - Part 8-3: Detail specification for 50-086 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-8-4 - Coaxial communication cables - Part 8-4: Detail specification for 50-141 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-8-5 - Coaxial communication cables - Part 8-5: Detail specification for 50-250 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-8-6 - Coaxial communication cables - Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-8-7 - Coaxial communication cables - Part 8-7: Detail specification for 75-086 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-8-8 - Coaxial communication cables - Part 8-8: Detail specification for 75-141 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-8-9 - Coaxial communication cables - Part 8-9: Detail specification for 75-250 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation
• IEC-61196-9 - Coaxial communication cables - Part 9: Sectional specification for flexible RF coaxial cables
• IEC-61196-9-1 - Coaxial communication cables - Part 9-1: Blank detail specification for flexible RF coaxial cables
• IEC-61196-9-2 - Coaxial communication cables - Part 9-2: Detail specification for 50-0,4 type RF flexible cables
• IEC-61338-1-2 - Part 1-2: Waveguide Type Dielectric Resonators
• IEC-61338-1-3 - Waveguide type dielectric resonators - Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
• IEC-61580-3 - Methods of measurement for Waveguides - Part 3: Variation of group delay
• IEC-61580-4 - Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies
• IEC-61726 - Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
• IEC-61935-1 - Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801-1 and related standards
• IEC-61935-1-1 - Specification for the testing of balanced and coaxial information technology cabling - Part 1-1: Additional requirements for the measurement of transverse conversion loss and equal level transverse conversion transfer loss
• IEC-61935-1-2 - Specification for the testing of balanced and coaxial information technology cabling - Part 1-2: Installed balanced cabling as specified in ISO/IEC 11801 - Additional requirements for measurement of resistance unbalance with field test instrumentation
• IEC-61935-2-21 - Specification for the testing of balanced and coaxial information technology cabling - Part 2-21: Category 6 cords as specified in ISO/IEC 11801-1 - Blank detail specification
• IEC-61935-2-22 - Specification for the testing of balanced and coaxial information technology cabling - Part 2-22: Category 6_A cords as specified in ISO/IEC 11801-1- Blank detail specification
• IEC-61935-2-23 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7 - Blank detail specification
• IEC-61935-2-24 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7_A - Blank detail specification
• IEC-61935-2-25 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-25: Work area cord with M12 4 poles connectors - Blank detail specification
• IEC-62037-2 - Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies
• IEC-62153-1-1 - Metallic communication cables test methods - Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)
• IEC-62153-4-0 - Metallic communication cable test methods - Part 4-0: Electromagnetic compatibility (EMC) - Relationship between surface transfer impedance and screening attenuation, recommended limits
• IEC-62153-4-1 - Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
• IEC-62153-4-10 - Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method
• IEC-62153-4-10-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method
• IEC-62153-4-11 - Metallic communication cable test methods - Part 4-11: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables - Absorbing clamp method
• IEC-62153-4-13 - Metallic communication cable test methods - Part 4-13: Electromagnetic compatibility (EMC) - Coupling attenuation of links and channels (laboratory conditions) - Absorbing clamp method
• IEC-62153-4-15 - Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
• IEC-62153-4-15-AM1 - Amendment 1 - Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
• IEC-62153-4-16 - Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
• IEC-62153-4-17 - Metallic cables and other passive components - Test methods . Part 4-17: Electromagnetic compatibility (EMC) - Reduction Factor
• IEC-62153-4-2 - Metallic communication cable test methods - Part 4-2: Electromagnetic compatibility (EMC) - Screening and coupling attenuation - Injection clamp method
• IEC-62153-4-3 - Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance - Triaxial method
• IEC-62153-4-3-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance - Triaxial method
• IEC-62153-4-4 - Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
• IEC-62153-4-5 - Metallic communication cables test methods - Part 4-5: Electromagnetic compatibility (EMC) - Coupling or screening attenuation - Absorbing clamp method
• IEC-62153-4-6 - Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method
• IEC-62153-4-7 - Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies - Triaxial tube in tube method
• IEC-62153-4-7-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
• IEC-62153-4-7-RL - Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies - Triaxial tube in tube method
• IEC-62153-4-8 - Metallic cables and other passive components - Test methods - Part 4-8: Electromagnetic compatibility (EMC) - Capacitive coupling admittance
• IEC-62153-4-8-RL - Metallic cables and other passive components - Test methods - Part 4-8: Electromagnetic compatibility (EMC) - Capacitive coupling admittance
• IEC-62153-4-9-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
• IEC-62153-4-9-AM2 - Amendment 2 - Metallic communication cable test methods - Part 4-9: Electromagnetic compatibility (EMC) related test method for measuring coupling attenuation of screened balanced cables - Triaxial method
• IEC-62153-4-9-RL - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
• IEC-62839-1 - Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
• IEC-636 - Flexible waveguide assembly performance

Other SDOs:

• BS-IEC-61196-6-5 - Coaxial communication cables
• EN-50117-1 - Coaxial cables - Part 1: Generic specification
• EN-50117-10-1 - Coaxial cables - Part 10-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz
• EN-50117-10-2 - Coaxial cables - Part 10-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz
• EN-50117-11-1 - Coaxial cables - Part 11-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz
• EN-50117-11-2 - Coaxial cables - Part 11-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Distribution and trunk cables for systems operating at 5 MHz - 2000 MHz
• EN-50117-2-1 - Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
• EN-50117-2-2 - Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz
• EN-50117-2-3 - Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz
• EN-50117-2-4 - Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
• EN-50117-2-5 - Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz
• EN-50117-3-1 - Sectional Specifications for Cables Used in Telecom Applications - Miniaturized Cables
• EN-50117-4-1 - Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
• EN-50117-4-2 - Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks
• EN-50117-9-1 - Coaxial cables - Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 1000 MHz
• EN-50117-9-2 - Coaxial cables - Part 9-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 3000 MHz
• EN-50117-9-3 - Coaxial cables - Part 9-3: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 6000 MHz
• EN-50288-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
• EN-50288-10-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables
• EN-50288-10-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
• EN-50288-11-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables
• EN-50288-11-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
• EN-50288-12-1 - Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal and building backbone cables
• EN-50288-2-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables
• EN-50288-7 - Multi-Element Metallic Cables Used in Analogue & Digital Communication & Control, Sect
• EN-50288-8 - Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz
• EN-50288-9-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables
• EN-50288-9-2 - Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
• EN-50289-1-16 - Communication Cables, Specifications for Test Methods, Electromagnetic Performance, Co
• EN-50289-1-17 - Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT
• EN-50289-1-6 - Communication Cables, Specifications for Test Methods, Electrical Test Methods, Electr
• EN-50289-1-9 - Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
• EN-50289-3-17 - Communication Cables, Specifications for Test Methods, Mechanical Test Methods, Adhesi
• EN-50289-3-8 - Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings
• EN-50289-4-11 - Communication Cables, Specifications for Test Methods, Environmental Test Methods, a H
• EN-50289-4-16 - Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit integrity under fire conditions
• EN-50289-4-17 - Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
• EN-50289-4-4 - Communication Cables, Specifications for Test Methods, Environmental Test Methods, Res
• EN-50289-4-5 - Communication Cables, Specifications for Test Methods, Environmental Test Methods, Cli
• EN-50289-4-7 - Communication Cables, Specifications for Test Methods, Environmental Test Methods, Dam
• EN-50290-2-1 - Communication cables - Part 2-1: Common design rules and construction
• EN-50290-2-20 - Communication cables - Part 2-20: Common design rules and construction - General
• EN-50290-2-21 - Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds
• EN-50290-2-23 - Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
• EN-50290-2-24 - Communication Cables, Common Design Rules & Construction, Pe Sheathing
• EN-50290-2-25 - Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
• EN-50290-2-27 - Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds
• EN-50290-2-28 - Communication Cables, Common Design Rules & Construction, Filling Compound for Filled
• EN-50290-2-29 - Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
• EN-50290-2-30 - Poly(TETRAFLUO-ROETHYLENE-Hexafluoropropylene) (Fep) Insulation & Sheathing
• EN-50290-2-33 - Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable)
• EN-50290-2-35 - Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound
• EN-50290-2-36 - Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound
• EN-50290-2-37 - Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
• EN-50290-2-38 - Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
• EN-50290-4-1 - Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
• EN-50290-4-2 - Communication cables - Part 4-2: General considerations for the use of cables - Guide to use
• EN-50441-1 - Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1
• EN-50441-2 - Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1
• EN-50441-3 - Part 3: Screened Cables - Grade 3; Cables for Indoor Residential Telecommunication Ins
• EN-50441-4 - Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3
• EN-50599 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class D applications - Detail specification
• EN-50601 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class D applications - Detail specification
• EN-50602 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class E applications - Detail specification
• EN-50603 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class E applications - Detail specification
• EN-60153-1 - Hollow metallic waveguides - Part 1: General requirements and measuring methods
• EN-60153-2 - Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides
• EN-60153-4 - Hollow metallic waveguides. Relevant specifications for circular waveguides
• EN-60154-1 - Flanges for waveguides - Part 1: General requirements
• EN-60154-2 - Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides
• EN-60154-4 - Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides
• EN-60728-1-2 - Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in Operation
• EN-60966-2-1 - Part 2-1: Sectional Specification for Flexible Coaxial Cable Assemblies, Radio Frequen
• EN-60966-2-3 - Part 2-3: Detail Specification for Flexible Coaxial Cable Assemblies - Frequency Range
• EN-60966-2-4 - Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
• EN-60966-2-5 - Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
• EN-60966-2-6 - Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
• EN-60966-2-7 - Radio frequency and coaxial cable assemblies - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors
• EN-60966-3 - Part 3: Sectional Specification for Semi-Flexible Coaxial Cable Assemblies, Radio Freq
• EN-60966-3-1 - Radio Frequency & Coaxial Cable Assemblies, Blank Detail Specification for Semi-Flexib
• EN-61196-10 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
• EN-61196-10-1 - Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
• EN-61580-3 - Methods of Measurement for Waveguides, Variation of Group Delay
• EN-61580-4 - Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies
• EN-61580-6 - Methods of Measurement for Waveguides, Return Loss on Waveguide & Waveguide Assemblies
• EN-61726 - Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
• EN-61935-1 - Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173
• EN-62037-2 - Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies
• EN-62153-4-7 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
• EN-62431 - Reflectivity of Electromagnetic Wave Absorbers in Millimetre Wave Frequency - Measurem
• EN-IEC-60966-1 - Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods (IEC 60966-1:2019)
• UNE-EN-50289-1-17 - Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT
• UNE-EN-50290-2-20 - Communication cables - Part 2-20: Common design rules and construction - General
• UNE-EN-50290-2-37 - Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
• UNE-EN-50290-2-38 - Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
• UNE-EN-61196-10 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric