Document Center List of Standards on Radio Relay And Fixed Satellite Communications Systems
ICS Code 33.060.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-EN-16803-2 - Space. Use of GNSS-based positioning for road Intelligent Transport Systems (ITS)
- BS-EN-16803-3 - Space. Use of GNSS-based positioning for road Intelligent Transport Systems (ITS)
- BS-EN-50478 - Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite . Modem layer specification
- BS-EN-50494 - Satellite signal distribution over a single coaxial cable in single dwelling installations
- BS-EN-60315-9 - Methods of measurement on radio receivers for various classes of emission. Measurement of the characteristics relevant to radio data system (RDS) reception
- BS-EN-60728-1-1 - Cable networks for television signals, sound signals and interactive services
- BS-EN-60835-1-3 - Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations
- BS-EN-60835-1-4 - Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations
- BS-EN-60835-2-4 - Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems
- BS-EN-60835-3-4 - Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations
- BS-EN-IEC-61169-69 - Radio-frequency connectors
- BS-IEC-61108-7 - Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS)
- PD-CEN-17447 - Space. Use of GNSS-based positioning for road Intelligent Transport System (ITS). Mathematical PVT error model
- PD-CEN-17448 - Space. Use of GNSS-based positioning for road Intelligent Transport Systems (ITS). Metrics and Performance levels detailed definition
- PD-CEN-17464 - Space. Use of GNSS-based positioning for road Intelligent Transport System (ITS). Security attacks modelling and definition of performance features and metrics related to security
- PD-CEN-17465 - Space. Use of GNSS-based positioning for road Intelligent Transport Systems (ITS). Field tests definition for basic performance
- PD-CEN-17475 - Space. Use of GNSS-based positioning for road Intelligent Transport System (ITS). Specification of the test facilities, definition of test scenarios, description and validation of the procedures for field tests related to security performance of GNSS-based positioning terminals
- PD-ISO-24317 - Intelligent transport systems. Mobility integration. Mobility integration needs for vulnerable users and light modes of transport
IEC:
- IEC-1149 - Guide for safe handling and operation of mobile radio equipment
- IEC-487-1 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 1: Measurements common to sub-systems and simulated radio-relay systems
- IEC-487-2-1 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section One: General
- IEC-487-2-2 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Two: Stand-by channel switching equipment
- IEC-487-2-3 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Three: R.F. Branching networks
- IEC-487-2-4 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Four: Frequency modulators
- IEC-487-2-5 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Five: Frequency demodulators
- IEC-487-2-6 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Six: Diversity, twin-path and hot stand-by equipment
- IEC-487-2-7 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Seven: Radio transmitters
- IEC-487-2-8 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Eight: Radio receivers
- IEC-487-3 - Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3: Simulated systems
- IEC-487-3-2 - Methods of measurement for equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section Two: Measurements in the baseband
- IEC-487-3-3 - Methods of measurement for equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section Three: Measurements for monochrome and colour television transmission
- IEC-487-3-4 - Methods of measurement for equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section Four: Measurements for f.d.m. transmission
- IEC-487-3-5 - Methods of measurement for equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section Five: Measurement of mutual interference
- IEC-487-3-6 - Methods of measurement for equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section Six: Measurements for sound programme transmission
- IEC-510-1 - Methods of measurement for radio equipment used in satellite earth stations. Part 1: General
- IEC-510-1-2 - Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Two: Measurements in the r.f. range
- IEC-510-1-3 - Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Three: Measurements in the i.f. range
- IEC-510-1-3-1 - Amendment No. 1
- IEC-510-1-4 - Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Four: Measurements in the baseband
- IEC-510-1-5 - Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Five: Noise temperature measurements
- IEC-510-1A - Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. First supplement: Sub-clause 6.2: D.C. source conditions
- IEC-510-2-1 - Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section One: General - Section Two: Antenna (including feed network)
- IEC-510-2-1-1 - Amendment No. 1
- IEC-510-2-3 - Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section Three: Low noise amplifier
- IEC-510-2-4 - Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section Four: Up- and down-converters
- IEC-510-2-5 - Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section five: Frequency modulators
- IEC-510-2-6 - Methods of measurements for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section six: Frequency demodulators
- IEC-510-2-7 - Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section Seven: High-power amplifier
- IEC-510-3-1 - Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section One: General
- IEC-510-3-2 - Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section Two: Measurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range
- IEC-510-3-3 - Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section Three: Measurements for monochrome and colour television transmission
- IEC-510-3-4 - Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement on combinations of sub-systems - Section four: Measurements for frequency division multiplex (f.d.m.) transmission
- IEC-60489-6 - Radio equipment used in mobile services - Methods of measurement - Part 6: Data equipment
- IEC-60728-1-1 - Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks
- IEC-60835-2-4 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulator
- IEC-60835-2-4-1 - Amendment No. 1
- IEC-61108-7 - Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 7: Satellite based augmentation system (SBAS) L1 - Receiver equipment - Performance standards, methods of testing and required test results
- IEC-835-1-1 - Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section One: General
- IEC-835-1-2 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics
- IEC-835-1-2-1 - Amendment No. 1
- IEC-835-1-3 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics
- IEC-835-1-3-1 - Amendment No. 1
- IEC-835-1-4 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance
- IEC-835-1-4-1 - Amendment No. 1
- IEC-835-2-1 - Methods of measurement for equipment used in digital microwave radio transmission systems. Part 2: Measurements on terrestrial radio-relay systems - Section One: General
- IEC-835-2-10 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section ten: Overall system performance
- IEC-835-2-11 - Methods of measurement for digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 11: Cross-polarization interference canceller
- IEC-835-2-2 - Methods of measurement for equipment used in digital microwave transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 2: Antenna
- IEC-835-2-3 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 3: RF branching networks
- IEC-835-2-5 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 5: Digital signal processing sub-system
- IEC-835-2-6 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching
- IEC-835-2-7 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment
- IEC-835-2-8 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer
- IEC-835-2-8-1 - Amendment No. 1 to IEC 835-2-8
- IEC-835-2-9 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels
- IEC-835-3-1 - Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3: Measurements on satellite earth stations - Section One: General
- IEC-835-3-10 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth station
- IEC-835-3-11 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission
- IEC-835-3-12 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 12: Overall system performance
- IEC-835-3-13 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 13: VSAT systems
- IEC-835-3-14 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 14: Earth stations for satellite news gathering (SNG)
- IEC-835-3-2 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna
- IEC-835-3-4 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 4: Low noise amplifier
- IEC-835-3-5 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 5: Up- and down-converters
- IEC-835-3-6 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High power amplifiers
- IEC-835-3-7 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system
- IEC-835-3-9 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 9: Terminal equipment SCPC-PSK
Other SDOs:
- EN-50478 - Functional Receiver Specification of Satellite Digital Interactive Television With a L
- EN-50494 - Satellite Signal Distribution Over a Single Coaxial Cable in Single Dwelling Installat
- EN-60728-1-1 - Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks
- EN-60835-1-3 - Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Syst
- EN-60835-1-4 - Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Syst
- EN-60835-2-4 - Part 2-4: Transmitter/Receiver Including Modulator/Demodulator
- EN-60835-3-4 - Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Syst
- SS-EN-16803-1 - Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 1: Definitions and system engineering procedures for the establishment and assessment of performances
- SS-EN-16803-2 - Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 2: Assessment of basic performances of GNSS-based positioning terminals
- SS-EN-16803-3 - Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 3: Assessment of security performances of GNSS-based positioning terminals