Document Center List of Standards on Rectifiers. Converters. Stabilized Power Supply Including Semiconductor Converters
ICS Code 29.200
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
BSI:
- BS-3456-2-2.36 - Specification for safety of household electrical appliances. Particular requirements. Battery chargers
- BS-5654-4 - Stabilized power supplies, d.c. output. Tests other than radio-frequency interference
- BS-7625 - Specification for voltage transformers
- BS-7626 - Specification for current transformers
- BS-EN-150008 - Harmonized system of quality assessment for electronic components. Blank detail specification: ambient-rated rectifier diodes
- BS-EN-150009 - Harmonized system of quality assessment for electronic components. Blank detail specification: case-rated rectifier diodes
- BS-EN-50091-1-2 - Specification for uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations
- BS-EN-50091-2 - Specification for uninterruptible power systems (UPS)
- BS-EN-50207 - Railway Applications - Electronic Power Converters for Rolling Stock
- BS-EN-50328 - Railway applications. Fixed installations. Electronic power convertors for substations
- BS-EN-50563 - External a.c.. d.c. and a.c.. a.c. power supplies. Determination of no-load power and average efficiency of active modes
- BS-EN-60146-1-1 - Semiconductor converters. General requirements and line commutated converters
- BS-EN-60146-2 - Semiconductor convertors. General requirements and line commutated convertors
- BS-EN-60335-2-29 - Household and similar electrical appliances. Safety
- BS-EN-60633 - Terminology for high-voltage direct current (HVDC) transmission
- BS-EN-60700-1 - Thyristor valves for high voltage direct current (HVDC) power transmission
- BS-EN-60700-2 - Thyristor valves for high voltage direct current (HVDC) power transmission
- BS-EN-61136-1 - Part 1: Rating Specifications, Particularly for D.C. Motor Drives
- BS-EN-61148 - Terminal markings for valve device stacks and assemblies and for power conversion equipment
- BS-EN-61204-3 - Low voltage power supplies, d.c. output. Electromagnetic compatibility (EMC)
- BS-EN-61204-6 - Low voltage power supplies, d.c. output
- BS-EN-61204-7 - Live working. Conductive clothing
- BS-EN-61800-1 - Adjustable speed electrical power drive systems
- BS-EN-61800-2 - Adjustable speed electrical power drive systems
- BS-EN-61800-3 - Adjustable speed electrical power drive systems
- BS-EN-61800-4 - Adjustable speed electrical power drive systems
- BS-EN-61800-5-1 - Adjustable speed electrical power drive systems
- BS-EN-61800-5-2 - Adjustable speed electrical power drive systems
- BS-EN-61800-5-2-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-61800-7-1 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-1-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-61800-7-201 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-201-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-61800-7-202 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-203 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-204 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-301 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-301-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-61800-7-302 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-302-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-61800-7-303 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-304 - Adjustable speed electrical power drive systems
- BS-EN-61800-7-304-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-61800-9-1 - Adjustable speed electrical power drive systems
- BS-EN-61800-9-2 - Adjustable speed electrical power drive systems
- BS-EN-61803 - Determination of power losses in high-voltage direct current (HVDC) converter stations line-commutated converters
- BS-EN-62040-1 - Uninterruptible power systems (UPS)
- BS-EN-62040-1-1 - Uninterruptible power systems (UPS)
- BS-EN-62040-1-2 - Uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations
- BS-EN-62040-2 - Uninterruptible power systems (UPS)
- BS-EN-62040-3 - Uninterruptible power systems (UPS)
- BS-EN-62040-4 - Uninterruptible power systems (UPS)
- BS-EN-62040-5-3 - Uninterruptible power systems (UPS)
- BS-EN-62310-2 - Static transfer systems (STS)
- BS-EN-62310-3 - Static transfer systems (STS)
- BS-EN-62477-1 - Safety requirements for power electronic converter systems and equipment
- BS-EN-62501 - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission. Electrical testing
- BS-EN-62747 - Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
- BS-EN-62747-TC - Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
- BS-EN-62751-1 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems
- BS-EN-62751-2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems
- BS-EN-62927 - Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM). Electrical testing
- BS-EN-IEC-60146-1-1 - Semiconductor converters. General requirements and line commutated converters
- BS-EN-IEC-60146-1-1-TC - Tracked Changes. Semiconductor converters. General requirements and line commutated converters
- BS-EN-IEC-60335-2-29 - Household and similar electrical appliances. Safety
- BS-EN-IEC-60633 - High-voltage direct current (HVDC) transmission. Vocabulary
- BS-EN-IEC-61204-3-TC - Tracked Changes. Low-voltage switch mode power supplies
- BS-EN-IEC-61204-7-TC - Tracked Changes. Low-voltage switch mode power supplies
- BS-EN-IEC-61800-1 - Adjustable speed electrical power drive systems
- BS-EN-IEC-61800-2 - Adjustable speed electrical power drive system
- BS-EN-IEC-61800-3-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-IEC-61800-5-1 - Adjustable speed electrical power drive systems
- BS-EN-IEC-61803 - Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
- BS-EN-IEC-62040-1 - Uninterruptible power systems (UPS)
- BS-EN-IEC-62040-2-TC - Tracked Changes. Uninterruptible power systems (UPS)
- BS-EN-IEC-62040-3 - Uninterruptible power systems (UPS)
- BS-EN-IEC-62477-1 - Safety requirements for power electronic converter systems and equipment
- BS-EN-IEC-62477-2 - Safety requirements for power electronic converter systems and equipment
- BS-EN-IEC-62680-1-5 - Universal serial bus interfaces for data and power
- BS-EN-IEC-62680-1-6 - Universal serial bus interfaces for data and power
- BS-EN-IEC-62684 - Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
- BS-EN-IEC-62684-TC - Tracked Changes. Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
- BS-EN-IEC-62751-2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems
- BS-EN-IEC-62909-1 - Bi-directional grid connected power converters
- BS-EN-IEC-62909-2 - Bi-directional grid-connected power converters
- BS-IEC-60092-304 - Electrical installations in ships
- DD-ENV-50091-3 - Specification for uninterruptible power systems (UPS). Performance requirements and test methods
- DD-IEC-61800-8 - Adjustable speed electrical power drive systems
- DD-IEC-62578 - Power electronics systems and equipment. Operation conditions and characteristics of active infeed converter applications
- DD-IEC/PAS-62001 - Guide to the specification and design evaluation of a.c. filters for HVDC systems
- DD-IEC/PAS-62543 - DC transmission using voltage sourced converters
- PD-CLC-61800-6 - Adjustable speed electrical power drive systems. Guide for determination of types of load duty and corresponding current ratings
- PD-IEC-60146-1-2 - Semiconductor converters. General requirements and line commutated converters
- PD-IEC-60919-1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters
- PD-IEC-60919-2 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters
- PD-IEC-60919-3 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters
- PD-IEC-62001 - High-voltage direct current (HVDC) systems. Guidebook to the specification and design evaluation of A.C. filters
- PD-IEC-62001-1 - High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters
- PD-IEC-62001-2 - High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters
- PD-IEC-62001-4 - High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters
- PD-IEC-62001-5 - High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters
- PD-IEC-62543 - High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
- PD-IEC-62578 - Power electronics systems and equipment. Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz
- PD-IEC-62578-TC - Tracked Changes. Power electronics systems and equipment. Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz
- PD-IEC-63014-1 - High voltage direct current (HVDC) power transmission. System requirements for DC-side equipment
- PD-IEC-63065 - Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station
- PD-IEC-63071 - Power supplying scheme for wearable systems and equipment
- PD-IEC-63179-1 - Guideline for planning of HVDC systems
- PD-IEC-63262 - Performance of unified power flow controller (UPFC) in electric power systems
- PD-IEC-63291-2 - High voltage direct current (HVDC) grid systems and connected converter stations. Guideline and parameter lists for functional specifications
- PD-IEC-63336 - Commissioning of VSC HVDC systems
- PD-IEC-63363-1 - Performance of voltage sourced converter (VSC) based high-voltage direct current (HVDC) transmission
- PD-IEC-63471 - DC voltages for HVDC grids
IEC:
- IEC-50(431) - International Electrotechnical Vocabulary. Transductors
- IEC-60050-431-AM1 - Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 431: Transductors
- IEC-60146-1-1 - Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
- IEC-60146-1-1 CMV - Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
- IEC-60146-1-2 - Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines
- IEC-60146-1-2-RL - Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines
- IEC-60335-2-29 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60335-2-29/A2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60335-2-29-AM1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60335-2-29-RL - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60618-2 - Amendment No. 2
- IEC-60633 - High-voltage direct current (HVDC) transmission - Vocabulary
- IEC-60633/A1 - Amendment 1 - Terminology for high-voltage direct current (HVDC) transmission
- IEC-60633-AM2 - Amendment 2 - Terminology for high-voltage direct current (HVDC) transmission
- IEC-60633-RL - High-voltage direct current (HVDC) transmission - Vocabulary
- IEC-60700-1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
- IEC-60700-1-1 - Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
- IEC-60700-1-2 - Amendment 2 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
- IEC-60700-2 - Corrigendum 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology
- IEC-60919-1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions
- IEC-60919-1-AM1 - Amendment 1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions
- IEC-60919-1-AM2 - Amendment 2 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions
- IEC-60919-1-RL - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions
- IEC-60919-2 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching
- IEC-60919-2-AM1 - Amendment 1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching
- IEC-60919-2-AM2 - Amendment 2 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching
- IEC-60919-3 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions
- IEC-60919-3-AM1 - Amendment 1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions
- IEC-61148 - Terminal markings for valve device stacks and assemblies and for power conversion equipment
- IEC-61204 - Low-voltage power supply devices, d.c. output - Performance characteristics
- IEC-61204-1 - Amendment 1 Low-voltage power supply devices, d.c. output - Performance characteristics
- IEC-61204-3 - Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
- IEC-61204-3-RL - Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
- IEC-61204-6 - Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance
- IEC-61204-7 - Low-voltage switch mode power supplies - Part 7: Safety requirements
- IEC-61204-7 EXV - Low-voltage switch mode power supplies – Part 7: Safety requirements
- IEC-61287-2 - Power convertors installed on board railway rolling stock - Part 2: Additional technical information
- IEC-618 - Inductive voltage dividers
- IEC-61800-1 - Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems
- IEC-61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for adjustable speed AC power drive systems
- IEC-61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
- IEC-61800-3-AM1 - Amendment 1 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- IEC-61800-3-RL - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- IEC-61800-4 - Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
- IEC-61800-5-2 - Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
- IEC-61800-5-2-RL - Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
- IEC-61800-5-3 - Adjustable speed electrical power drive systems - Part 5-3: Safety requirements - Functional, electrical and environmental requirements for encoders
- IEC-61800-7-1 - Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition
- IEC-61800-7-201 - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
- IEC-61800-7-201-RL - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
- IEC-61800-7-202 - Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification
- IEC-61800-7-203 - Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification
- IEC-61800-7-204 - Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification
- IEC-61800-7-301 - Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies
- IEC-61800-7-301-RL - Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies
- IEC-61800-7-302 - Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies
- IEC-61800-7-303 - Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies
- IEC-61800-7-304 - Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies
- IEC-61800-8 - Adjustable speed electrical power drive systems - Part 8: Specification of voltage on the power interface
- IEC-61800-9-1 - Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM)
- IEC-61800-9-2 - Adjustable speed electrical power drive systems (PDS) - Part 9-2: Ecodesign for motor systems - Energy efficiency determination and classification
- IEC-61803 - Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
- IEC-61803-AM1 - Amendment 1 - Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
- IEC-61803-AM2 - Amendment 2 - Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters
- IEC-61803-RL - Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
- IEC-618-1 - Amendment No. 1
- IEC-62001 - High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters
- IEC-62001-1 - High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview
- IEC-62001-1-RL - High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview
- IEC-62001-2 - High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 2: Performance
- IEC-62001-3 - High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 3: Modelling
- IEC-62001-4 - High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment
- IEC-62001-4-RL - High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment
- IEC-62001-5 - High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 5: AC side harmonics and appropriate harmonic limits for HVDC systems with voltage sourced converters (VSC)
- IEC-62040-1 - Uninterruptible power systems (UPS) - Part 1: Safety requirements
- IEC-62040-1-1 - Part 1-1: General & Safety Requirements for Ups Used in Operator Access Areas - Uninterrup
- IEC-62040-1-2 - Part 1-2: General & Safety Requirements for Ups Used in Restricted Access Locations
- IEC-62040-1-AM1 - Amendment 1 - Uninterruptible power systems (UPS) - Part 1: Safety requirements
- IEC-62040-1-EXV - Uninterruptible power systems (UPS) - Part 1: Safety requirements
- IEC-62040-2 - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
- IEC-62040-2-RL - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
- IEC-62040-3 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
- IEC-62040-4 - Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting
- IEC-62040-5-3 - Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
- IEC-62310-2 - Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements
- IEC-62310-3 - Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements
- IEC-62477-1 - Safety requirements for power electronic converter systems and equipment - Part 1: General
- IEC-62477-1-AM1 - Amendment 1 - Safety requirements for power electronic converter systems and equipment - Part 1: General
- IEC-62477-2 - Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC
- IEC-62501 - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
- IEC-62501-AM1 - Amendment 1 - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
- IEC-62501-AM2 - Amendment 1 - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
- IEC-62543 - High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
- IEC-62543-AM1 - Amendment 1 - High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
- IEC-62543-AM2 - Amendment 2 - High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
- IEC-62543-RL - High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
- IEC-62578 - Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz
- IEC-62680-1-5 - Universal serial bus interfaces for data and power . Part 1-5: Common components . USB Audio 3.0 device class definition
- IEC-62680-1-6 - Universal serial bus interfaces for data and power . Part 1-6: Common components . USB Audio 3.0 device class definition basic functions
- IEC-62684 - Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
- IEC-62684-RL - Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
- IEC-62710 - Residual current devices (RCDs) associated with additional functions(s)
- IEC-62711 - Mnemonics and designations of symbols for measuring relays, instruments and related device
- IEC-62747 - Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
- IEC-62747-AM1 - Amendment 1 - Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
- IEC-62751-1 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
- IEC-62751-1-AM1 - Amendment 1 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
- IEC-62751-1-AM2 - Amendment 2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
- IEC-62751-2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
- IEC-62751-2-AM1 - Amendment 1 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
- IEC-62751-2-AM2 - Amendment 2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
- IEC-62909-1 - Bi-directional grid connected power converters - Part 1: General requirements
- IEC-62909-2 - Bi-directional grid-connected power converters - Part 2: Interface of GCPC and distributed energy resources
- IEC-62927 - Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing
- IEC-62927-AM1 - Amendment 1 - Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing
- IEC-63014-1 - High voltage direct current (HVDC) power transmission - System requirements for DC-side equipment - Part 1: Using line-commutated converters
- IEC-63065 - Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station
- IEC-63065-AM1 - Amendment 1 - Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station
- IEC-63071 - Power supplying scheme for wearable system and equipment
- IEC-63179-1 - Guideline for planning of HVDC systems - Part 1: HVDC systems with line-commutated converters
- IEC-63262 - Performance of unified power flow controller (UPFC) in electric power systems
- IEC-63291-1 - High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications - Part 1: Guideline
- IEC-63291-2 - High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications - Part 2: Parameter lists
- IEC-63336 - Commissioning of VSC HVDC systems
- IEC/PAS-62001 - Guide To the Specification & Design Evaluation of a.C. Filters for Hvdc Systems
- IEC/PAS-62543 - Dc Transmission Using Voltage Sourced Converters
Other SDOs:
- BS-EN-IEC-62501-TC - Tracked Changes. Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission. Electrical testing
- EN-50328 - Railway Applications - Fixed Installations - Electronic Power Converters for Substatio
- EN-50563 - External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
- EN-60146-1-1 - Part 1-1: Specification of Basic Requirements, Semiconductor Converters - General Requ
- EN-60633 - Terminology for high-voltage direct current (HVDC) transmission
- EN-60700-1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
- EN-60700-2 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology
- EN-61148 - Terminal markings for valve device stacks and assemblies and for power conversion equipment
- EN-61204-7 - Part 7: Safety Requirements, Low Voltage Power Supplies, D.C. Output
- EN-61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
- EN-61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- EN-61800-5-1 - Part 5-1: Safety Requirements - Electrical, Thermal & Energy, Adjustable Speed Electri
- EN-61800-5-2 - Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
- EN-61800-7-1 - Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition
- EN-61800-7-201 - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
- EN-61800-7-202 - Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification
- EN-61800-7-203 - Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification
- EN-61800-7-204 - Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification
- EN-61800-7-301 - Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologie
- EN-61800-7-302 - Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies
- EN-61800-7-303 - Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies
- EN-61800-7-304 - Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies
- EN-61800-9-1 - Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using t
- EN-61803 - Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters
- EN-62040-1 - Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS
- EN-62040-2 - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
- EN-62040-3 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
- EN-62040-4 - Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting
- EN-62040-5-3 - Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
- EN-62310-2 - Static Transfer Systems (Sts), Electromagnetic (Emc) Requirements
- EN-62310-3 - Static Transfer Systems (Sts), Method for Specifying Performance & Test Requirements
- EN-62477-1 - Safety requirements for power electronic converter systems and equipment - Part 1: General
- EN-62501 - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
- EN-62747 - Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
- EN-62751-1 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
- EN-62751-2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
- EN-62927 - Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing
- EN-IEC-60633 - High-voltage direct current (HVDC) transmission - Vocabulary (IEC 60633:2019)
- EN-IEC-61204-3 - Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
- EN-IEC-61204-7 - Low-voltage switch mode power supplies - Part 7: Safety requirements
- EN-IEC-61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- EN-IEC-62040-1 - Uninterruptible power systems (UPS) - Part 1: Safety requirements (IEC 62040-1:2017)
- EN-IEC-62040-2 - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
- EN-IEC-62477-2 - Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1000 V AC or 1500 V DC up to 36 kV AC or 54 kV DC
- EN-IEC-62909-1 - Bi-directional grid-connected power converters - Part 1: General requirements
- JIS-C-4402 - Thyristor rectifiers for floating charge
- JIS-C-4402-AM1 - Thyristor rectifiers for floating charge (Amendment 1)
- JIS-C-4412 - Safety requirements for electric energy storage equipment
- SS-EN-12184 - Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
- SS-EN-60335-2-29 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers