Document Center List of Standards on Other Electrical Accessories
ICS Code 29.120.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D2443 - Standard Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment (Withdrawn 2000)
- ASTM-D2671 - Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
- ASTM-E1934 - Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
BSI:
- BIP-2081 - A Guide to Emergency Lighting, Third Edition
- BS-4662 - Boxes for flush mounting of electrical accessories. Requirements, test methods and dimensions
- BS-5266-2 - Emergency lighting
- BS-5266-6 - Emergency lighting
- BS-5490 - Specification for classification of degrees of protection provided by enclosures
- BS-EN-60358-1 - Coupling capacitors and capacitor dividers
- BS-EN-60358-2 - Coupling capacitors and capacitor dividers
- BS-EN-60358-3 - Coupling capacitors and capacitor dividers
- BS-EN-60529 - Degrees of protection provided by enclosures (IP Code)
- BS-EN-60670-21 - Boxes and enclosures for electrical accessories for household and similar fixed electrical installations
- BS-EN-60831-1 - Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V
- BS-EN-60831-2 - Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V
- BS-EN-60947-4-1 - Low-voltage switchgear and controlgear
- BS-EN-60947-7-2 - Low-voltage switchgear and controlgear
- BS-EN-60947-7-3 - Low-voltage switchgear and controlgear
- BS-EN-61242 - Electrical accessories. Cable reels for household and similar purposes
- BS-EN-61316 - Industrial cable reels
- BS-EN-61535 - Installation couplers intended for permanent connection in fixed installations
- BS-EN-62080 - Sound signalling devices for household and similar purposes
- BS-EN-62094-1 - Indicator light units for household and similar fixed-electrical installations
- BS-EN-62275 - Cable management systems. Cable ties for electrical installations
- BS-EN-63044-1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
- BS-EN-IEC-60358-4 - Coupling capacitors and capacitor dividers
- BS-EN-IEC-60947-4-1 - Low-voltage switchgear and controlgear
- BS-EN-IEC-60966-3-1 - Radio frequency and coaxial cable assemblies
- BS-EN-IEC-60966-3-1-TC - Tracked Changes. Radio frequency and coaxial cable assemblies
- BS-EN-IEC-61316 - Tracked Changes. Industrial cable reels
- BS-EN-IEC-61316-TC - Tracked Changes. Industrial cable reels
- BS-EN-IEC-61535 - Installation couplers intended for permanent connection in fixed installations
- BS-EN-IEC-61535-TC - Tracked Changes. Installation couplers intended for permanent connection in fixed installations
- BS-EN-IEC-63044-3 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
- BS-EN-IEC-63044-4 - Home and building electronic systems (HBES) and building automation and control systems (BACS)
- BS-EN-IEC-63044-5-1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
- BS-EN-IEC-63044-5-3 - Home and building electronic systems (HBES) and building automation and control systems (BACS)
- BS-IEC-60358-2 - Coupling capacitors and capacitor dividers. AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
- BS-IEC-60529 - Degrees of protection provided by enclosures (IP code)
- BS-IEC-61540 - Portable residual current devices (PRCDs) without integral overcurrent protection for household and similar use
- BS-IEC-62275 - Cable management systems. Cable ties for electrical installations
- BSI-Flex-2071-v1.0 - Design of publicly accessible charging sites for battery electric HGVs. Code of practice
- PD-IEC-63044-2 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS).
- PD-IEC-63396 - Noise measurement method on power capacitors
IEC:
- IEC-60110-1 - Power capacitors for induction heating installations - Part 1: General
- IEC-60110-2 - Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
- IEC-60358-1 - Coupling capacitors and capacitor dividers - Part 1: General rules
- IEC-60358-2 - Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
- IEC-60358-3 - Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitor for harmonic-filters applications
- IEC-60358-4 - Coupling capacitors and capacitor dividers - Part 4: DC and AC single-phase capacitor dividers
- IEC-60670-21 - Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means
- IEC-60831-1 - Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
- IEC-60831-1-1 - Amendment 1: Shunt Power Capacitors of the Self-Healing Typefor a.C. Systems Having a Rat
- IEC-60831-1-RL - Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
- IEC-60831-2 - Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test
- IEC-60931-1-1 - Amendment 1
- IEC-60947-4-1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
- IEC-60947-4-1-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
- IEC-60947-4-1-2 - Amendment 2: Low-Voltage Switchgear & Controlgear - Part 4-1: Contactors & Motor-Start
- IEC-60947-4-1-RL - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
- IEC-60947-5-3-1 - Amendment 1: Low-Voltage Switchgear & Controlgear - Part 5-3: Control Circuit Devices
- IEC-60947-5-5 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
- IEC-60947-5-5-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
- IEC-60947-5-5-AM2 - Amendment 2 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
- IEC-60947-7-2 - Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
- IEC-60947-7-3 - Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks
- IEC-61095 - Electromechanical contactors for household and similar purposes
- IEC-61095-RL - Electromechanical contactors for household and similar purposes
- IEC-61242-1 - Amendment 1 - Electrical accessories - Cable reels for household and similar purposes
- IEC-61242-2 - Amendment 2 - Electrical accessories - Cable reels for household and similar purposes
- IEC-61316 - Industrial cable reels
- IEC-61316-RL - Industrial cable reels
- IEC-61535 - Installation couplers intended for permanent connection in fixed installations
- IEC-61535-AM1 - Amendment 1 - Installation couplers intended for permanent connection in fixed installations
- IEC-61535-RL - Installation couplers intended for permanent connection in fixed installations
- IEC-61642 - Industrial a.c. networks affected by harmonics - Application of filters and shunt capacitors
- IEC-62080 - Sound signalling devices for household and similar purposes
- IEC-62080-1 - Amendment 1 - Sound signalling devices for household and similar purposes
- IEC-62094-1 - Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements
- IEC-62275 - Cable management systems - Cable ties for electrical installations
- IEC-62275 CMV - Cable management systems - Cable ties for electrical installations
- IEC-63044-1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements
- IEC-63044-1-AM1 - Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements
- IEC-63044-2 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 2: Environmental conditions
- IEC-63044-3 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
- IEC-63044-3-AM1 - Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
- IEC-63044-4 - Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
- IEC-63044-5-1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up
- IEC-63044-5-1-AM1 - Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up
- IEC-63044-5-2 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
- IEC-63044-5-2-AM1 - Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
- IEC-63044-5-3 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments
- IEC-63044-5-3-AM1 - Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments
- IEC-63044-6 - Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 6: Requirements for planning and installation
- IEC-63210 - Shunt power capacitors of the self-healing type for AC systems having a rated voltage above 1 000 V
- IEC-63396 - Noise measurement method on power capacitors
- IEC-931-1 - Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
- IEC-931-2 - Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test and destruction test
Other SDOs:
- BS-EN-50172-TC - Tracked Changes. Emergency escape lighting systems
- BS-EN-IEC-63044-3-TC - Tracked Changes. Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
- EN-50172 - Emergency Escape Lighting Systems
- EN-60358-1 - Coupling capacitors and capacitor dividers - Part 1: General rules
- EN-60358-2 - Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
- EN-60358-3 - Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitors for harmonic-filters applications
- EN-60670-21 - Boxes & Enclosures for Electrical Accessories for Household & Similar Fixed Electrica
- EN-60831-1 - Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
- EN-60831-2 - Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test
- EN-60947-4-1 - Part 4-1: Contactors & Motor-Starters - Electromechanical Contactors & Motor-Starters,
- EN-60947-5-5 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
- EN-60947-7-2 - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conduc
- EN-60947-7-3 - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks, Low-Volt
- EN-61095 - Electromechanical Contactors for Household & Similar Purposes
- EN-61242 - Electrical accessories - Cable reels for household and similar purposes
- EN-61535 - Installation couplers intended for permanent connection in fixed installations
- EN-62080 - Sound signalling devices for household and similar purposes
- EN-62275 - Cable management systems - Cable ties for electrical installations
- EN-63044-1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements
- EN-IEC-60358-4 - Coupling capacitors and capacitor dividers - Part 4: DC and AC single-phase capacitor dividers (IEC 60358-4:2018)
- EN-IEC-60947-4-1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor- starters (IEC 60947-4-1:2018)
- EN-IEC-63044-3 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements