Document Center List of Standards on Fuses And Other Overcurrent Protection Devices
ICS Code 29.120.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E528 - Practice for Grounding Basic Optical Emission Spectrochemical Equipment (Withdrawn 1998)
- ASTM-F1207 - Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems (Withdrawn 1997)
- ASTM-F1507 - Standard Specification for Surge Suppressors for Shipboard Use
- ASTM-F2249 - Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
- ASTM-F855 - Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
BSI:
- BS-1361 - Specification for cartridge fuses for a.c. circuits in domestic and similar premises
- BS-1362 - General purpose fuse links for domestic and similar purposes (primarily for use in plugs). Specification
- BS-2692-2 - Fuses for voltages exceeding 1000 V a.c.
- BS-2692-3 - Fuses for voltages exceeding 1000 V a.c. Guide to the determination of short circuit power factor
- BS-2950 - Specification. Cartridge fuse-links for telecommunication and light electrical apparatus
- BS-3036 - Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth)
- BS-3871-1 - Specification for Miniature & Moulded Case Circuit-Breakers,Miniature Air-Break Circui
- BS-4265 - Specification for cartridge fuse links for miniature fuses
- BS-4293 - Specification for residual current-operated circuit-breakers
- BS-5126-2 - Mining type flameproof supply and control units for use on systems up to 1100 V
- BS-5486-11 - Specification for Particular Requirements of Fuseboards
- BS-5564 - Specification for high-voltage fuses for the external protection of shunt power capacitors
- BS-646 - Specification for Cartridge fuse-links (rated up to 5 amperes) for a.c. and d.c. service
- BS-6885 - Specification for miniature cartridge fuse links for use on printed wiring boards
- BS-7071 - Specification for portable residual current devices
- BS-714 - Specification. Cartridge fuse-links for use in railway-signalling circuits
- BS-7288 - Specification for residual current devices with or without overcurrent protection for socketoutlets for household and similar uses
- BS-7288-TC - Tracked Changes. Specification for residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- BS-7633 - Internal fuses for series capacitors
- BS-7654 - Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture
- BS-7656 - Specification for Low-voltage pole-mounting fuses (cut-outs). 400 A rating
- BS-7657 - Cutout assemblies up to 100 A rating, for power supply to buildings. Specification
- BS-7657-TC - Tracked Changes. Cutout assemblies up to 100 A rating, for power supply to buildings. Specification
- BS-842 - Specification for a.c. voltage-operated earth-leakage circuit breakers
- BS-8488 - Prefabricated wiring systems intended for permanent connection in fixed installations. Specification
- BS-8488-1 - Prefabricated Wiring Systems Intended for Permanent Connection in Fixed Installations,
- BS-88-2 - Low-voltage fuses
- BS-88-3 - Low-voltage fuses
- BS-EN-1760-1 - Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
- BS-EN-50122-1 - Railway applications. Fixed installations. Electrical safety, earthing and the return circuit
- BS-EN-50122-2 - Railway applications. Fixed installations. Electrical safety, earthing and the return circuit
- BS-EN-50122-2-TC - Tracked Changes. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit
- BS-EN-50122-3 - Railway applications. Fixed installations. Electrical safety, earthing and the return circuit
- BS-EN-50122-3-TC - Tracked Changes. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit
- BS-EN-50123-5 - Railway Applications, Fixed Installations, D.C. Switchgear,Surge Arresters & Low-Volt
- BS-EN-50310 - Telecommunications bonding networks for buildings and other structures
- BS-EN-50310-TC - Tracked Changes. Telecommunications bonding networks for buildings and other structures
- BS-EN-50468 - Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports
- BS-EN-50522 - Earthing of power installations exceeding 1 kV a.c.
- BS-EN-50522-TC - Earthing of power installations exceeding 1 kV a.c.
- BS-EN-50526-1 - Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices
- BS-EN-50526-2 - Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices
- BS-EN-50526-3 - Railway application. Fixed installations. D.C. surge arresters and voltage limiting devices
- BS-EN-50539-11 - Low-voltage surge protective devices. Surge protective devices for specific application including d.c.
- BS-EN-50550 - Power frequency overvoltage protective device for household and similar applications (POP)
- BS-EN-50557 - Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
- BS-EN-60099-4 - Surge arresters
- BS-EN-60099-5 - Surge arresters
- BS-EN-60099-9 - Surge arresters
- BS-EN-60127-1 - Miniature fuses
- BS-EN-60127-10 - Miniature fuses
- BS-EN-60127-2 - Miniature fuses
- BS-EN-60127-3 - Miniature fuses
- BS-EN-60127-3-TC - Tracked Changes. Miniature fuses
- BS-EN-60127-4 - Miniature fuses
- BS-EN-60127-5 - Miniature fuses
- BS-EN-60127-6 - Miniature fuses
- BS-EN-60127-7 - Miniature fuses
- BS-EN-60143-3 - Series capacitors for power systems
- BS-EN-60269-1 - Low-voltage fuses
- BS-EN-60269-2 - Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Main
- BS-EN-60269-3 - Low-Voltage Fuses, Supplementary Requirements for Fuses Foruse by Unskilled Persons (
- BS-EN-60269-4 - Low-voltage fuses
- BS-EN-60269-4-1 - Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devices
- BS-EN-60269-6 - Low-voltage fuses
- BS-EN-60282-1 - High-voltage fuses
- BS-EN-60420 - Specification for high-voltage alternating current switch-fuse combinations
- BS-EN-60427 - Synthetic testing of high-voltage alternating current circuit-breakers
- BS-EN-60549 - High-voltage fuses for the external protection of shunt capacitors
- BS-EN-60644 - Specification for high-voltage fuse-links for motor circuit applications
- BS-EN-60691 - Thermal-links. Requirements and application guide
- BS-EN-60691-TC - Thermal-links. Requirements and application guide
- BS-EN-60898 - Specification for circuit-breakers for overcurrent protection for household and similar installations
- BS-EN-60898-1 - Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations
- BS-EN-60898-2 - Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations
- BS-EN-60898-2-TC - Tracked Changes. Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations
- BS-EN-61008-1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
- BS-EN-61009-1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)
- BS-EN-61543 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
- BS-EN-61643-21 - Low voltage surge protective devices
- BS-EN-61643-31 - Low-voltage surge protective devices
- BS-EN-61643-321 - Low voltage surge protective devices
- BS-EN-61643-341 - Low voltage surge protective devices
- BS-EN-62019 - Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units
- BS-EN-62020 - Electrical accessories. Residual current monitors for household and similar uses (RCMs)
- BS-EN-62423 - Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
- BS-EN-62606 - General requirements for arc fault detection devices
- BS-EN-63024 - Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs-RCCBs for household and similar uses
- BS-EN-IEC-60099-5 - Surge arresters
- BS-EN-IEC-60099-5-TC - Tracked Changes. Surge arresters
- BS-EN-IEC-60127-8 - Miniature fuses
- BS-EN-IEC-60282-1 - High-voltage fuses
- BS-EN-IEC-60282-4 - High-voltage fuses
- BS-EN-IEC-60691 - Thermal-links. Requirements and application guide
- BS-EN-IEC-60691-TC - Tracked Changes. Thermal-links. Requirements and application guide
- BS-EN-IEC-60934 - Circuit breakers for equipment (CBE)
- BS-EN-IEC-61300-2-38 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-IEC-61300-2-38-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-IEC-61543 - Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility
- BS-EN-IEC-61643-331 - Components for low-voltage surge protection
- BS-EN-IEC-61643-331-TC - Tracked Changes. Components for low-voltage surge protective devices
- BS-EN-IEC-61643-332 - Components for low-voltage surge protection
- BS-EN-IEC-61643-341 - Components for low-voltage surge protection
- BS-EN-IEC-62020-1 - Electrical accessories. Residual current monitors (RCMs)
- BS-EN-IEC-62841-2-6 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-IEC-63052 - Power frequency overvoltage protective devices (POPs) for household and similar applications
- BS-EN-ISO-13856-1 - Safety of machinery. Pressure-sensitive protective devices
- BS-HD-60269-2 - Low-voltage fuses
- BS-HD-60269-3 - Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Examples of standardized systems of fuses A to F
- BS-IEC-60099-8 - Surge arresters. Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
- BS-IEC-60127-4 - Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types
- BS-IEC-60127-7 - Miniature fuses. Miniature fuse-links for special applications
- BS-IEC-60269-6 - Low-voltage fuses. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
- BS-IEC-60755-1 - General safety requirements for residual current operated protected devices
- BS-IEC-60898-3 - Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations
- BS-IEC-62873-1 - Residual current operated circuit-breakers for household and similar use
- BS-IEC-62873-2 - Residual current operated circuit-breakers for household and similar use
- BS-IEC-62873-3-1 - Residual current operated circuit-breakers for household and similar use
- BS-IEC-62873-3-2 - Residual current operated circuit-breakers for household and similar use
- BS-IEC-62873-3-3 - Residual current operated circuit-breakers for household and similar use
- BS-IEC-62873-3-3-TC - Tracked Changes. Residual current operated circuit-breakers for household and similar use
- BS-IEC-62955 - Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles
- DD-CLC-50539-12 - Low-voltage surge protective devices. Surge protective devices for specific application including d.c.
- DD-CLC-50539-22 - Low-voltage surge protective devices. Surge protective devices for specific application including d.c.
- DD-CLC-50544 - Low voltage d.c. surge protective device for traction systems. Selection and application rules for surge arresters
- DD-CLC-61643-22 - Low-voltage surge protective devices
- HD-60269-2 - Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
- PD-CLC-50539-12 - Low-voltage surge protective devices. Surge protective devices for specific application including d.c.
- PD-CLC-50656 - SPD application in conjunction with Class II equipment
- PD-CLC-51643-32 - Low-voltage surge protective devices
- PD-IEC-60099-10 - Surge arresters
- PD-IEC-60787 - Application guide for the selection of high-voltage current-limiting fuse-links for transformer circuits
- PD-IEC-62066 - Surge overvoltages and surge protection in low-voltage a.c. power systems. General basic information
- PD-IEC-62350 - Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use
- PD-IEC-62655 - Tutorial and application guide for high-voltage fuses
- PD-IEC-63053 - General requirements for residual current operated protective devices for DC systems
- PD-IEC/PAS-60099-7 - Surge arresters
- PD-IEC/PAS-60127-8 - Miniature fuses
IEC:
- IEC-1008-2-1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage
- IEC-1008-2-2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage
- IEC-1009-2-1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage
- IEC-1009-2-2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage
- IEC-127-3 - Miniature fuses - Part 3: Sub-miniature fuse-links
- IEC-127-3-1 - Amendment No. 1
- IEC-127-5 - Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
- IEC-127-6 - Miniature fuses - Part 6: Fuse-holders for miniature cartridge fuse-links
- IEC-127-6-1 - Amendment No. 1 to IEC 127-6
- IEC-60099-1 - Part 1: Non-Linear Resistor Type Gapped Surge Arresters Fora.C. Systems, Surge Arresters
- IEC-60099-10 - Surge arresters - Part 10: Rationale for tests specified by IEC 60099-4:2014
- IEC-60099-4 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
- IEC-60099-4-1 - Amendment 1 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
- IEC-60099-4-AM 2 - Amendment 2 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
- IEC-60099-5 - Surge arresters - Part 5: Selection and application recommendations
- IEC-60099-5-RL - Surge arresters - Part 5: Selection and application recommendations
- IEC-60099-9 - Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
- IEC-60127-1 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
- IEC-60127-10 - Miniature fuses - Part 10: User guide for miniature fuses
- IEC-60127-1-1 - Amendment 1 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
- IEC-60127-1-2 - Amendment 2 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
- IEC-60127-1-RL - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
- IEC-60127-2 - Miniature fuses - Part 2: Cartridge fuse-links
- IEC-60127-2-2 - Amendment 2 - Miniature fuses - Part 2: Cartridge fuse-links
- IEC-60127-2-AM1 - Amendment 1 - Miniature fuses - Part 2: Cartridge fuse-links
- IEC-60127-2-AM 1 - Amendment 1 - Miniature fuses - Part 2: Cartridge fuse-links
- IEC-60127-3 - Miniature fuses - Part 3: Sub-miniature fuse-links
- IEC-60127-3-2 - Amendment 2
- IEC-60127-3-AM1 - Amendment 1 - Miniature fuses - Part 3: Sub-miniature fuse-links
- IEC-60127-4 - Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
- IEC-60127-4-1 - Amendment 1 - Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
- IEC-60127-4-2 - Amendment 2 - Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
- IEC-60127-5 - Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
- IEC-60127-6 - Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
- IEC-60127-6-2 - Amendment 2
- IEC-60127-6-RL - Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
- IEC-60127-7 - Miniature fuses - Part 7: Miniature fuse-links for special applications
- IEC-60127-8 - Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
- IEC-60127-8-AM1 - Amendment 1 - Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
- IEC-60269-1 - Low-voltage fuses - Part 1: General requirements
- IEC-60269-1-1 - Amendment 1 - Low-voltage fuses - Part 1: General requirements
- IEC-60269-1-2 - Amendment 2 - Low-voltage fuses - Part 1: General requirements
- IEC-60269-1-RL - Low-voltage fuses - Part 1: General requirements
- IEC-60269-2 - Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
- IEC-60269-2-1 - Part 2-1: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly
- IEC-60269-2-AM1 - Amendment 1 - Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
- IEC-60269-2-AM2 - Amendment 2 - Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
- IEC-60269-3 - Low-voltage fuses - Part 3: Supplementary requirements for fuses for operation by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F
- IEC-60269-3-1 - Part 3-1: Supplementary Requirements for Fuses for Use by Unskilled Persons (Fuses Mainly
- IEC-60269-3/AM 1 - Corrigendum 2 to Amendment 1 - Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
- IEC-60269-3-AM2 - Amendment 2 - Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
- IEC-60269-3 CMV - Low-voltage fuses - Part 3: Supplementary requirements for fuses for operation by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F
- IEC-60269-4 - Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
- IEC-60269-4-1 - Part 4-1: Supplementary Requirements for Fuse-Links for Theprotection of Semiconductor D
- IEC-60269-4-2 - Amendment 2 - Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
- IEC-60269-4-AM1 - Amendment 1 - Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
- IEC-60269-4 CMV - Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
- IEC-60269-5 - Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
- IEC-60269-5-AM1 - Amendment 1 - Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
- IEC-60269-6 - Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
- IEC-60269-6-AM1 - Amendment 1 - Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
- IEC-60269-7 - Low-voltage fuses - Part 7: Supplementary requirements for fuse-links for the protection of batteries and battery systems
- IEC-60282-1 - High-voltage fuses - Part 1: Current-limiting fuses
- IEC-60282-1-AM1 - Amendment 1 - High-voltage fuses - Part 1: Current-limiting fuses
- IEC-60282-2 - High-voltage fuses - Part 2: Expulsion fuses
- IEC-60282-4 - High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators
- IEC-60364-4-42 - Low-voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
- IEC-60364-4-42-AM1 - Amendment 1 - Low-voltage electrical installation - Part 4-42: Protection for safety - Protection against thermal effects
- IEC-60364-4-43 - Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
- IEC-60549 - High-voltage fuses for the external protection of shunt capacitors
- IEC-60644 - Specification for high-voltage fuse-links for motor circuit applications
- IEC-60644-AM1 - Amendment 1 - Specification for high-voltage fuse-links for motor circuit applications
- IEC-60691 - Thermal-links - Requirements and application guide
- IEC-60691-1 - Amendment 1 - Thermal-links - Requirements and application guide
- IEC-60691-2 - Amendment 2 - Thermal-links - Requirements and application guide
- IEC-60691-AM1 - Amendment 1 - Thermal-links - Requirements and application guide
- IEC-60691-RL - Thermal-links - Requirements and application guide
- IEC-60755 - General safety requirements for residual current operated protective devices
- IEC-60755-1 - General safety requirements for residual current operated protective devices - Part 1: Residual current operated protective devices for DC systems
- IEC-60787 - Application Guide for the Selection of High-Voltage Current-Limiting Fuse-Links for Tr
- IEC-60898-1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
- IEC-60898-1-1 - Amendment 1
- IEC-60898-1-2 - Amendment 2
- IEC-60898-1-AM1 - Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
- IEC-60898-2 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for AC and DC operation
- IEC-60898-2-1 - Amendment 1
- IEC-60898-3 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation
- IEC-60898-3-AM1 - Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation
- IEC-60934 - Circuit breakers for equipment (CBE)
- IEC-60934-1 - Amendment 1 - Circuit-breakers for equipment (CBE)
- IEC-60934-2 - Amendment 2 - Circuit-breakers for equipment (CBE)
- IEC-60934-RL - Circuit breakers for equipment (CBE)
- IEC-61008-1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
- IEC-61008-1-1 - Corrigendum 1 - Amendment 1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBS) - Part 1: General rules
- IEC-61008-1-2 - Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
- IEC-61009-1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
- IEC-61009-1-1 - Amendment 1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
- IEC-61009-1-2 - Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
- IEC-61543-1 - Amendment 1 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
- IEC-61543-2 - Amendment 2 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
- IEC-61818 - Application Guide for Low-Voltage Fuses
- IEC-62019 - Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
- IEC-62019-1 - Amendment 1
- IEC-62020 - Electrical accessories - Residual current monitors for household and similar uses (RCMs)
- IEC-62020-1 - Electrical accessories - Residual current monitors for household and similar uses (RCMs)
- IEC-62335 - Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications
- IEC-62341-5-2 - Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance test methods
- IEC-62350 - Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use
- IEC-62423 - Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
- IEC-62606 - General requirements for arc fault detection and protection devices (AFDDs)
- IEC-62606-AM1 - Amendment 1 - General requirements for arc fault detection devices
- IEC-62606-AM2 - Amendment 2 - General requirements for arc fault detection devices
- IEC-62640 - Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- IEC-62640-AM1 - Amendment 1 - Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- IEC-62655 - Tutorial and application guide for high-voltage fuses
- IEC-62752 - In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles
- IEC-62752-AM1 - Amendment 1 - In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
- IEC-62873-1 - Residual current operated circuit-breakers for household and similar use - Part 1: Outline of blocks and modules for residual current device standards
- IEC-62873-1-AM1 - Amendment 1 - Residual current operated circuit-breakers for household and similar use - Part 1: Outline of blocks and modules for residual current device standards
- IEC-62873-2 - Residual current operated circuit-breakers for household and similar use - Part 2: Residual current devices (RCDs) - Vocabulary
- IEC-62873-3-1 - Residual current operated circuit-breakers for household and similar use - Part 3-1: Particular requirements for devices with screwless-type terminals for external copper conductors
- IEC-62873-3-1-RL - Residual current operated circuit-breakers for household and similar use - Part 3-1: Particular requirements for devices with screwless-type terminals for external copper conductors
- IEC-62873-3-2 - Residual current operated circuit-breakers for household and similar use - Part 3-2: Particular requirements for devices with flat quick-connect terminations
- IEC-62873-3-2-RL - Residual current operated circuit-breakers for household and similar use - Part 3-2: Particular requirements for devices with flat quick-connect terminations
- IEC-62873-3-3 - Residual current operated circuit-breakers for household and similar use - Part 3-3: Specific requirements for devices with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with aluminium conductors
- IEC-62873-3-3-RL - Residual current operated circuit-breakers for household and similar use - Part 3-3: Specific requirements for devices with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with aluminium conductors
- IEC-62955 - Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles
- IEC-63024 - Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses
- IEC-63052 - Power frequency overvoltage protective devices (POPs) for household and similar applications
- IEC-63053 - General requirements for residual current operated protective devices for DC system
- IEC-931-3 - Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fuses
- IEC-99-3 - Surge arresters. Part 3: Artificial pollution testing of surge arresters
- IEC/PAS-60127-8 - Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
Other SDOs:
- EN-1760-1 - Part 1: General Principles for the Design & Testing of Pressure-Sensitive Mats & Press
- EN-50122-2 - Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
- EN-50122-3 - Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
- EN-50310 - Telecommunications bonding networks for buildings and other structures
- EN-50468 - Resistibility Requirements To Overvoltages & Overcurrents Due To Lightning for Equipme
- EN-50522 - Earthing of power installations exceeding 1 kV a.c.
- EN-50526-2 - Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
- EN-50526-3 - Railway application - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3: Application Guide
- EN-50539-11 - Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications
- EN-50550 - Power frequency overvoltage protective device for household and similar applications (POP)
- EN-50557 - Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
- EN-60099-4 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
- EN-60099-5 - Surge arresters - Part 5: Selection and application recommendations
- EN-60099-9 - Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
- EN-60127-1 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
- EN-60127-10 - Miniature Fuses, User Guide for Mimiature Fuses
- EN-60127-2 - Miniature fuses - Part 2: Cartridge fuse-links
- EN-60127-3 - Miniature fuses - Part 3: Sub-miniature fuse-links
- EN-60127-4 - Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
- EN-60127-5 - Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
- EN-60127-6 - Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
- EN-60127-7 - Miniature fuses - Part 7: Miniature fuse-links for special applications
- EN-60269-1 - Low-voltage fuses - Part 1: General requirements
- EN-60269-4 - Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
- EN-60269-6 - Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
- EN-60282-1 - High-voltage fuses - Part 1: Current-limiting fuses
- EN-60427 - Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers
- EN-60549 - High-voltage fuses for the external protection of shunt capacitors
- EN-60644 - Specification for High-Voltage Fuse-Links for Motor Circuit Application
- EN-60691 - Thermal-links - Requirements and application guide
- EN-60898-1 - Electrical Accessories, Circuit-Breakers for Overcurrent Protection for Household & Si
- EN-60898-2 - Electrical Accessories, Circuit-Breakers for Overcurrent Protection for Household & Si
- EN-60934 - Circuit-breakers for equipment (CBE)
- EN-61008-1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
- EN-61009-1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
- EN-61643-321 - Specifications for Avalanche Breakdown Diode (Abd)
- EN-61643-341 - Specification for Thyristor Surge Suppressors (Tss)
- EN-62019 - Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
- EN-62020 - Electrical Accessories - Residual Current Monitors for Household & Similar Uses (Rcms)
- EN-62423 - Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
- EN-62606 - General requirements for arc fault detection devices
- EN-62752 - In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
- EN-63024 - Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
- EN-IEC-60099-5 - Surge arresters - Part 5: Selection and application recommendations
- EN-IEC-60127-8 - Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
- SS-EN-1760-1 - Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
- SS-EN-1760-2 - Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
- SS-EN-50122-1 - Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
- SS-EN-ISO-13856-1 - Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
- SS-EN-ISO-13856-2 - Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
- UNE-EN-50526-3 - Railway application - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3: Application Guide
- UNE-EN-61009-1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
- UNE-HD-60364-4-46 - Low-voltage electrical installations - Part 4-46: Protection for safety - Isolation and switching
- UNE-HD-60364-5-534 - Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages
- UNE-HD-60364-5-537 - Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection, isolation, switching, control and monitoring - Clause 537: Isolation and switching
- UNE-HD-60364-5-557 - Low-voltage electrical installations - Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits
- UNE-HD-62640 - Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- UNE-HD-62640/A11 - Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses